i have dedicated server and was trying to install torrentflux in there ( well might be any other script with Mysql needs) I created databse with plesk but when i put it to confinguration it does not work. I have done this Many times on shared hosting though
View 4 RepliesAfter migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
im using centos and a perl script doesnt seem to work on my system.
it gives an error on this line.
use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");
BEGIN failed--compilation aborted at line 8.
is it a problem with my perl or is it an error with the script?
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245
Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
Please help me out with this as soon as possible.
I need a VPS that allows TorrentFlux, where can I get it?
View 4 Replies View RelatedI need a vps no more than 15euros/month for torrent flux(download torrents+seeder)..Need i more than 100 mb ram ? Which company do you think that can serve me?
View 14 Replies View RelatedI try to install wordpress on my dedicated server but in the begin i get this error:
Your PHP installation appears to be missing the MySQL extension which is required by WordPress
I have centos 5.3 and i have run the command: service mysql start
But i think mysql server is not running, because i have kloxo and from the panel i can see what servers are running.
I want to set up a website that will run rapidleech and torrentflux. But my shared hosting account just isn’t cutting it anymore. It worked for awhile, but then they set stupid php resource limitations in and the scripts don’t work anymore. So I want an upgrade.
Should I look at VPS or Dedicated? I don’t want to spend more than $50/month, so I’m guessing that a crappy dedicated server is all I can get. There are some specific things that I would like to be able to do with my account.
1. WinRAR – I need to be able to pack and unpack files in the winrar format on my website through FTP. Would I need Linux/Unix or Windows hosting for this? I honestly am clueless about this.
2. Ability to run Rapidleech and TorrentFlux
3. Do I need to look for hosting that gives “root access” whatever that means? Someone told me that if I want to install WinRAR I must have “root access.”
Can you guys please recommend a lot of torrentflux hosts, I want to look through them. It must come with an ftp account.
View 1 Replies View RelatedIs there any cheap vps available with TorrentFlux (a php based torrent client - no tracker hosting) and IRC (psybnc, eggdrop) allowed?
View 7 Replies View RelatedI did an apache rebuild and about two hours later, my mysql stopped working.
So i tried various rebuilds to see if perhaps it was suoshin (this caused php to stop working on my server before) but to no avail, this hasnt fixed it. I cant even access the databases via phpmyadmin.
I've restarted the mysql server, apache, i've rebooted a couple times. I don't know what to do.
I'm using Windows XP and installed Apache, PHP 5 and MySql 5. They were all working before, but recently I had to format my hard drive. Fortunately, I had an image of my computer created from before but MySql was not installed when that image was created.
After deploying that image, everything seems to be working fine. The server is running and PHP scripts are executing as well. But I can't seem to have MySql to work. I've followed many tutorials online, but have no luck.
I have edited the php.ini file to point to the correct directory that holds the extentions or dll's. I also enabled the following:
extension=php_mbstring.dll
extension=php_mysqli.dll
extension=php_mysql.dll
I already tested to see if MySql was correctly installed by using the command line client and it seems to be installed. I was able to log in and see the default databases created.
But when I run the following php script
<? phpinfo() ?>
I don't see the MySql section anywhere and that's why I'm assuming that PHP is not currently working with MySql for me. However, interestingly, I do see the "mbstring" section, which I assume should show only if MySql is working with PHP. But nothing else related to MySql info shows up. I've attached part of the screen shot if it helps you.
i have Made a VPs on my Own dedicated Server Which i use to run TorrentFlux for Personal Use.
I am facing a few problems and dont know where to askf or help.
when i start more than about 12, i get errors in SSh (if i llogin) or th4e Apache Restarts killing all the Transfers.
I ahve 2 Gb Ram, Dual Core CPU.
the Error Via SSh is:
sh: pipe error: Too many open files in system
and i ahve attached a Errors Log From Apache.
i am a Noob in Servers so i ahve Lxadmin Contorl Panel Installed and the Log is generated by it.
As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.
Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.
so for over 3 weeks now pc-core.net had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.
they told me to email cshelpdesk.com to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.
is there anything i can do? im basically just being ignored and they dont even have a number to them.
my forum is VB and its doesnt sent any email for users!
i check the options and everything looks fine ..
my vps had csf firewall installed ..
the csf.conf is
# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).
# Allow incoming TCP ports
TCP_IN = "53,1116,80"
# Allow outgoing TCP ports
TCP_OUT = "53,80,3306,1116"
# Allow incoming UDP ports
UDP_IN = "1116,53"
# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "53,1116"
# Allow incoming PING
ICMP_IN = "0"
# Set the per IP address incoming ICMP packet rate
# To disable rate limiting set to "0"
ICMP_IN_RATE = "1/s"
# Allow outgoing PING
ICMP_OUT = "1"
# Set the per IP address outgoing ICMP packet rate
# To disable rate limiting set to "0"
ICMP_OUT_RATE = "1/s"
and the version of csf is
[root@www csf]# /usr/sbin/csf -v
csf: v4.56 (generic)
[root@www csf]#
am useing centOS5 and ssh port 1116
am not useing any of control panel or ftp ...
the email i configured it with google.com/a services ..
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]
We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd
tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
Connected to ks357687.kimsufi.com.
Escape character is'^]'.
Get
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<hr>
<address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop
Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused
I am using Windows 2003 Enterprise Edition SP1 and i have recently set the computer up to 4GB RAM. I notice a problem occur error :
When I start the computer, Bios detected all 4GB Ram. However, i have checked Total physical memory in General (My Computer-> Properties) doesnot detect all 4GB Ram. it only detect 3GB Ram.
I have checked that this OS support up to 32GB . Why it doesn't detect all 4GB ?
What happen to it?
Mainboard : Intel chipset 915GL
I did following the instruction in internet (exactly is Microsoft) is /PAE in boot.ini file. But, it doesnt work.
Yesterday we registerd and created 2 domains in our server.
Everything is ok, files uploaded, dns zones created, httpd virtual host created...
The problem is that trying to browse the site trough http://www.site.com redirects me to [url] my main server IP address, this page shows a cPanel Welcome message.
But, using [url], the site is loaded ok, withouth any problems.
DNS zone shows:
Code:
; cPanel 11.11.0-BETA_16977
; Zone file for site.com
$TTL 14400
@ 86400 IN SOA mydns1.wolo.com. admin.hostingserver.com. (
2007092601 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds
site.com. 86400 IN NS mydns1.wolo.com.
site.com. 86400 IN NS mydns2.wolo.com.
site.com. IN A IP_ADDRESS
localhost.site.com. IN A 127.0.0.1
site.com. IN MX 0 site.com.
mail IN CNAME site.com.
www IN A IP_ADDRESS
ftp IN A IP_ADDRESS
Apache virtual host code
Code:
<VirtualHost IP_ADDRESS>
ServerAlias www.site.com
ServerAdmin webmaster@site.com
DocumentRoot /home/siteuser/public_html
ServerName site.com
<IfModule mod_suphp.c>
suPHP_UserGroup siteuser siteuser
</IfModule>
<IfModule mod_php4.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
<IfModule mod_php5.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
User siteuser
Group siteuser
BytesLog /usr/local/apache/domlogs/site.com-bytes_log
CustomLog /usr/local/apache/domlogs/site.com combined
Options -ExecCGI -Includes
</VirtualHost>
The email of my client doesnt receive certain emails from certain accounts, including my yahoo.com.ph account. After several tries I received this error instead.
After trying to send mail unsuccedfully several times, this is the error I am getting.
Hi. This is the qmail-send program at yahoo.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
:
Sorry, I couldn't find any host by that name. (#4.1.2)
I'm not going to try again; this message has been in the queue too
long.
--- Below this line is a copy of the message.
Quote:
Originally Posted by copy of email
Return-Path:
Received: (qmail 90296 invoked by uid 60001); 25 Jun 2007 04:05:27
-0000
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
h=X-YMail-OSG:Receivedate:Fromubject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID;
b=GYMZ4utbLEJMc+EXHdW5Ng5ZJeCArXAubpEaUtZzZz77STh9HAGNhrFDjgfqNJ5BdE/
SAlCQ78wseeWPTqUFlalE246OSls0L2tnadTvmxHAQiALfIJ/efHw980subD/VVk6c3NZXGKaKn3vQwJ57bHW5a6qsWjazjl6BXp5Q20=;
X-YMail-OSG:
1iaqBZkVM1mfqTKSQPqhJwf61.zXtBuozzwn.p275yXXF_KgFA8taeSyThc.P1xawEKTuVIB
Vgxk18AHBp_TxSZD753CsOSTbU56JD1OgWwBl8GCwZNxI6YhJHPfyg--
Received: from [203.177.91.252] by web32604.mail.mud.yahoo.com via
HTTP; Sun, 24 Jun 2007 21:05:26 PDT
Date: Sun, 24 Jun 2007 21:05:26 -0700 (PDT)
From: *********
Subject: test
To: sales@*********.com
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="0-357102911-1182744326=:89673"
Content-Transfer-Encoding: 8bit
Message-ID: <979097.89673.qm@web32604.mail.mud.yahoo.com>
--0-357102911-1182744326=:89673
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
test
why this mysql command doesn't work on phpmyadmin on cpanel server.
Quote:
CREATE VIEW TEST AS SELECT * FROM COURSE
it give this error:
Quote:
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'VIEW TEST AS SELECT * FROM COURSE' at line 1
to upload some flash videos over to our web host.
All the videos have been uploaded to << link removed >> and in there you will seea flash_video directory, in there should be a html file where you can double click and watch the flash video.
Now go ahead and try it, click on the HTML file and click CONTINUE and try clicking on MODULE 1.. You will see a video play to the left but on the right are bunch of POWERPOINT slides that will appear as the guy continues to speak. THAT DOESNT SHOW..
Our website is hosted by xo.com
Dont know much about the plan since its my 2nd day at the job..
But here is the weird part,
i have uploaded the samething - same exact way to another web host and it plays fine, the PPTs show up fine..
What do you guys think it is?
Before someone asks about uploading methods, i tried filezilla, coreftp and cuteFTP using both ASCII and binary methods. Samething..
Since my /var partition is full, so I moved /var/lib/mysql to /backup/mysql/.
Seems all the files are copied and I changed my.cnf reboot mysql, but all the web sites using db is not working anymore..
I installed the MySQL binary packages in /usr/local/mysql/ after removing the MySQL RPM package. MySQL is functioning when I executed /usr/local/mysql/bin/safe_mysqld. I reinstalled MySQL before I installed PHP. When I used a PHP script to access a MySQL database, it outputs an error:
Code:
Warning: mysqli::mysqli() [function.mysqli-mysqli]: (HY000/2002): can't connect to local mysql server through socket /var/lib/mysql/mysql.sock in index.php on line 2
However, I installed MySQL in /usr/local/mysql, not in /var/lib/mysql. How do I fix MySQL?
For some reason mysql wont start, i have tried restarting mysql but it wont, it says FAILED. The mysql.sock file seems to have disappeared and i cannot find it anywhere.
View 5 Replies View RelatedI recently had a harddrive failure and luckliy I can still access certain directories on this failed drive. I can still access the /var/lib/mysql/ directory which holds all the users databases and have backed all these up separately using tar.
Now what I need to know is how do you restore these database files to another server? I tried simply untar'ing one of these to the new servers /var/lib/mysql/ direcotry and it stuffed Mysql up - it went offline. I had to get a cpanel tech to bring Mysql back online.
how can I get these database files to fully work on a new server?
Can someone recommended me some one with knowledge of mysql exploit or mysql injection, it seem to our VB forum have issue with database load..
View 5 Replies View RelatedI've been racking my brains with this problem for the last couple of months and have made zero progress. I've asked a lot of people if they know what might be wrong here, but none of them have any idea.
Basically, the problem is that any sort of service monitor I put on my server shows MySQL as being down/offline, even when I know for sure it's up and running perfectly fine. All other services report a green light.
The mysqld service is running on port 3306, which is open both inbound and outbound on my APF config, so as far as I can tell it's nothing to do with the firewall (I won't rule that out though).
The other odd thing is that MySQL shows a green light within WHM, but not anywhere else.
Does anyone know what might be wrong here? Am I missing something entirely fundamental and obvious?