I did an apache rebuild and about two hours later, my mysql stopped working.
So i tried various rebuilds to see if perhaps it was suoshin (this caused php to stop working on my server before) but to no avail, this hasnt fixed it. I cant even access the databases via phpmyadmin.
I've restarted the mysql server, apache, i've rebooted a couple times. I don't know what to do.
when I try to go to a site of mine with the www like this one [url] It won't work but if I take out the www like this[url]it does work.
I'm not sure what could be causing this. As far as I'm aware everything is setup okay. I understand it's impossible for anyone who reads this to properly diagnose the issue without access to my server.
I've got the latest grsec stable, but i'm having a problem with getting ip_conntrack working.
I did the following with make menuconfig after copying my default kernels config file...
Networking -> Networking support -> Networking options -> Network packet filtering
framework (Netfilter) -> Core Netfilter -> Configuration -> Netfilter Xtables support
(required for ip_tables) -> "conntrack" connection tracking match support.
After a compile and reboot:
error: "net.ipv4.netfilter.ip_conntrack_generic_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_icmp_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_close" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_time_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_last_ack" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_close_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_fin_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_established" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_syn_recv" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_syn_sent" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_udp_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_udp_timeout_stream" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_max" is an unknown key
error: "net.ipv4.ip_conntrack_max" is an unknown key
I did a ls on /lib/modules/2.6.27.10-grsec/kernel/net/ipv4/netfilter and dont see the modules that i see in the default kernels...
I have complied exim 4.66 version using the source, now i do not seem to make it work
i am getting the fallowing error when i try send mail
$ exim xxx@xxxx.xxx
test
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Cannot open main log file "/var/log/exim/mainlog": Permission denied: euid=8 egid=12
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Failed to create spool file /var/spool/exim/input//1HOeWd-0000SH-EZ-D: Permission denied
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Cannot open main log file "/var/log/exim/mainlog": Permission denied: euid=8 egid=12
exim: could not open panic log - aborting: see message(s) above
when i do $ service exim restart the service fail to stop and but starts OK.
there is no control panel installed on the box.
I'm running Plesk 8.4.0 and for whatever reason apparently IonCube didn't come pre installed or wasn't working so I tried installing it which is just getting the .so files and adding it to the php.ini that didn't work so I tried Zend the installer said it was complete but again no go. So I have this for an error
[root@liquidwind ~]# php -v
Failed loading /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: undefined symbol: zend_unmangle_property_name_ex
Failed loading /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: undefined symbol: zend_unmangle_property_name_ex
Failed loading /usr/local/Zend/lib/Optimizer-3.3.3/php-5.2.x/ZendOptimizer.so: /usr/local/Zend/lib/Optimizer-3.3.3/php-5.2.x/ZendOptimizer.so: cannot restore segment prot after reloc: Permission denied
PHP 5.2.5 (cli) (built: Jan 19 2008 10:30:38)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
[root@liquidwind ~]#
I'm having issues after changing my system time and rebooting for whatever reason it didn't take effect but now my VMWare servers wont boot. I get this error when trying to run a vmware-cmd
[root@plexus ~]# /usr/bin/vmware-cmd -l
/usr/bin/vmware-cmd: Could not connect to vmware-authd
(VMControl error -14: Unexpected response from vmware-authd: 511 Error connecting to /usr/sbin/vmware-serverd process.)
[root@plexus ~]#
also when i try logging into the web interface same error.
to implement a chat but I need that it wont overwhelm the server if is easy to set up it would be even better!
I am trying phpfreechat which uses ajax files as container, is that method better than using mysql as a acontainer?
So this is a new problem for me, and I have no idea what could be broken?
My server works, but none of the sites load.
Server ip is 69.162.121.170, one of the sites is bloghost.cl
Where should I start looking? When you try to visit the site it just tells you it cant establish a connection. All I did was restart the server today, and now nothing works
I built a web hosting server, the following is its state
Cent os 5
AMP server loaded updated (installed it as a complete suite during installation so it was all set to go with php mysql modules loaded)
webmin
usermin virtualmin
created 2 named based hosts.
now when i load up wordpress in a site and try to run install.php
the following pops up
"Sorry, I can't write to the directory. You'll have to either change the permissions on your WordPress directory or create your wp-config.php manually."
I had this issue before and research said to redo the entire server (tried everything and was fed up had fedora then"
you can have a look at www.itgrunts.com just click create config file and the errror pops up.
The php and mysql db work great on simple scripts but i dont know why this happens.
i worked with assigning the users and apache user to the directory and everything, no joy.
An automatic backup in plesk has filled up the disk space in my VPS. It seemed to crash first of all - couldn't access my website, then i tried to restart it. It wont restart and comes up with the error below.
As i can't get into plesk i don't know how to delete these old backup files, seem to be in a catch 22. Help
Jul 17, 2008 01:05:33 PM Start Process Completed
Jul 17, 2008 01:05:33 PM Click here to open/close operation details.Start VPS #48606643 Failed
Jul 17, 2008 01:05:33 PM Operation start with the VPS(s) VEID48606643 is started.
Jul 17, 2008 01:05:33 PM Starting VE ...
Jul 17, 2008 01:05:33 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:33 PM VE is mounted
Jul 17, 2008 01:05:33 PM Setting devperms 20002 dev 0x7f00
Jul 17, 2008 01:05:33 PM Setting devperms 20007 dev 0xac8
Jul 17, 2008 01:05:33 PM Adding port redirection to VE(1): 4643 8443
Jul 17, 2008 01:05:33 PM Adding IP address(es): 212.227.251.151
Jul 17, 2008 01:05:34 PM ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0
Jul 17, 2008 01:05:34 PM bash: line 264: echo: write error: Disk quota exceeded
Jul 17, 2008 01:05:35 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:35 PM VE is unmounted
Jul 17, 2008 01:05:35 PM VE start failed
Jul 17, 2008 01:05:35 PM Operation start with the VPS(s) VEID48606643 is finished with errors: #1004 Error invoking vzctl utility: Starting VE ... vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is mounted Setting devperms 20002 dev 0x7f00 Setting devperms 20007 dev 0xac8 Adding port redirection to VE(1): 4643 8443 Adding IP address(es): 212.227.251.151 ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0 bash: line 264: echo: write error: Disk quota exceeded vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is unmounted VE start failed . Failed
Jul 17, 2008 01:05:35 PM Complete Process Failed
I try to install wordpress on my dedicated server but in the begin i get this error:
Your PHP installation appears to be missing the MySQL extension which is required by WordPress
I have centos 5.3 and i have run the command: service mysql start
But i think mysql server is not running, because i have kloxo and from the panel i can see what servers are running.
I'm using Windows XP and installed Apache, PHP 5 and MySql 5. They were all working before, but recently I had to format my hard drive. Fortunately, I had an image of my computer created from before but MySql was not installed when that image was created.
After deploying that image, everything seems to be working fine. The server is running and PHP scripts are executing as well. But I can't seem to have MySql to work. I've followed many tutorials online, but have no luck.
I have edited the php.ini file to point to the correct directory that holds the extentions or dll's. I also enabled the following:
extension=php_mbstring.dll
extension=php_mysqli.dll
extension=php_mysql.dll
I already tested to see if MySql was correctly installed by using the command line client and it seems to be installed. I was able to log in and see the default databases created.
But when I run the following php script
<? phpinfo() ?>
I don't see the MySql section anywhere and that's why I'm assuming that PHP is not currently working with MySql for me. However, interestingly, I do see the "mbstring" section, which I assume should show only if MySql is working with PHP. But nothing else related to MySql info shows up. I've attached part of the screen shot if it helps you.
i have dedicated server and was trying to install torrentflux in there ( well might be any other script with Mysql needs) I created databse with plesk but when i put it to confinguration it does not work. I have done this Many times on shared hosting though
View 4 Replies View Relatedi am having an issue with my vps recently my ftp is down and i cant restart my ftp not sure how i can get this fix.
View 8 Replies View RelatedI've got a small box running as a fileserver with CentOS 5. Sometimes life is a little easier using a GUI for jobs rather than SSH.
As this is not accessible externally, I've got it to autologin to a non-privilaged user, and as part of that logon a VNC session is opened using the inbuilt remote desktop tool.
This was working perfectly, until I realised if I cold boot the server without a monitor attached, X11 wont start at all unless I attach a monitor to it.
I know I can start a VNC session from using vncserver, but this way allows me to logon to the server as if I was sat infront of it, rather than running an extra session.
Presumabley I can add something into /etc/X11/xorg.conf so X11 will start without a monitor hooked up?
I keep trying to restart Apache but it wont restart... I run a command line to restart it, but nothing happens. Here is what I have tried:
Quote:
-bash-3.1# chroot /home/fatehost.net/runtime_layeredpanel/
fatehost:/# /etc/
bash: /etc/: is a directory
fatehost:/# /etc/init.d
bash: /etc/init.d: is a directory
fatehost:/# /etc/init.d/httpd-users
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 5955) already running
.
fatehost:/# /etc/init.d/httpd-users force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 13475) already running
.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users stop
Stopping web server: Apache2.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/#
fatehost:/# sudo /etc/init.d/httpd-users stop
bash: sudo: command not found
fatehost:/# su root /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 20391) already running
.
fatehost:/# /etc/init.d/httpd-users reboot
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# reboot
WARNING: could not determine runlevel - doing soft reboot
(it's better to use shutdown instead of reboot from the command line)
shutdown: timeout opening/writing control channel /dev/initctl
init: timeout opening/writing control channel /dev/initctl
fatehost:/# WARNING: could not determine runlevel - doing soft reboot
bash: WARNING:: command not found
fatehost:/# (it's better to use shutdown instead of reboot from the command line)
> shutdown: timeout opening/writing control channel /dev/initctl
> init: timeout opening/writing control channel /dev/initctl
>
fatehost:/# /home/fatehost.net/runtime_layeredpanel
bash: /home/fatehost.net/runtime_layeredpanel: No such file or directory
fatehost:/#
I have this problem today after a fresh install...
I think its maybe i havent dont it proper im not sure..
But a client joined today and i have new account created auto after payment and well it says in the whmcs the user has an login and password but when i tried to login with it it said login failed
Also it trys to login to whm not cpanel with the account, even tho its set up as shared hosting in products...
the login link is : [url]( i removed name for security)
We know the problem with geekstorage that their vps nodes are oversold.
i asked for a refund for the months i havent use yet, and they wont refund me, they just say that i will get credit, but i think it is not fair he can not hold my money for a service that has not been provided yet, im not asking for a full refund, just for the months i prepaid
i have 268 dollars in favor, i offer a deal to jay to just refund me 218 dollars instead of 268, and now he is not responding my tickets i have been waiting more than 24 hours to get a response
One of my customers has been having a problem with his index files not showing up. It'll display the parent directory, and you can clearly see the index.html file in there, but it won't show it as the index.
It happened in one directory, and I went into .htaccess and did DirectoryIndex index.php.... but now i'm wondering if its part of a bigger problem, because its happening to other folders now.
why this mysql command doesn't work on phpmyadmin on cpanel server.
Quote:
CREATE VIEW TEST AS SELECT * FROM COURSE
it give this error:
Quote:
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'VIEW TEST AS SELECT * FROM COURSE' at line 1
[root@server1 ~]# service httpd start
no listening sockets available, shutting down
Unable to open logs
CENTOS Enterprise 4.6 i686 on standard - WHM X v3.1.0
apache 2.2
httpd.conf file was empty... I'm recompiling right now.
I doubt that anyone can solve this, but here goes...
This is my first server, and I simply cannot get it to work.
MY CONFIGURATION:
Speedstream 4200 DSL modem w/ethernet line to NETGEAR Wireless Router (WPN824). The router connects with CAT5 cable to my Windows XP server computer (which has the latest Apache and PHP). Wirelss signal is used for my other computer.
I am running Apache with no-ip as well. My site name is: [url]
MY PROBLEM:
I have set up HTTP port forwarding in my modem (which for some reason acts as a router as well) to port 80, with my server address as 192.168.254.10 The problem is that I cannot connect to my web site within my network. My friend is able to view the website from his home.
I am not able to configure my NETGEAR router to accept the port forwarding of 192.168.254.10 because it isn't a "valid LAN address" --- but I can't configure my modem to use a different address either.
1. My modem is plugged into the Internet Port on my WPN824
2. My XP server is plugged into one of the four LAN PORTS on my WPN824
3. My modem is set to forward port 80 to 192.168.254.10
4. My WPN824 is set to forward port 80 to your XP server address 192.168.1.3
Obviously something is wrong with my guess, because just forwarding the modem to 192.168.254.10 doesn't seem like it could get my friend connected all the way through to your Apache server.
IP ADDRESSES:
Default Gateway: 192.168.254.254
XP/Apache: 192.168.1.3
Speedstream 4200 Modem: 192.168.254.254
NETGEAR: 192.168.1.1
Server (forwarded on 80): 192.168.254.10
The 'default gateway' is set to (according to an ipconfig run) 192.168.1.1 (NETGEAR router) However, the 'default gateway' in the NETGEAR router page says that "gateway IP address" is 192.168.254.254 (modem)...
STATIC IP?
Also, my Network Connections is set to 'obtain IP address automatically'. I have tried to set it to a static IP, but it doesn't work. The router wil not allow me to forward to the server with any IP that is?.254.?
Unfortunately, this setup is very complicated and I think that something is conflicting.
I have this felling that I'm really close but that something very small is in the way.
I have a dedicated server, on this server I have only 2 website.
I created an account before and that account work correctly.
now I created a new account and when I trying to run a simple php file show me "Internal Server Error".
I can view html files and I haven't .htaccess file .
Server Inofrmation:
CentOS , cPanel , Apache 2, PHP 5
I have order 2 servers from ftp at October 12 2008, both are setup at same time!
At October 13, the general support tell me that server have been hacked? I haven't start using both servers, why them are been hacked? they said the problem is sloved... so ok...
I got plesk installed on both server, but both server ftp not working. the ftp module is installed but i cannot connect from anywhere on the work!
I create 4 new ticket to sales, general support and billing, but no one want slove the problem, they reply me like this:
""We offer only the default OS installs.
The helpdesk does not provide support in configuration of any software packages. You may however contact our managed services department at help@fdcservers.net for a price/availability quote. If you would like us to move your ticket to their department, please let us know.""
the server is setup error and got hacker attack it, they just leave it without doing anything, what should i do?
I already write a ticket to cancel servers, but until now no response!
I just want you guy to know, If alphared don't have problems, i will still stay with them! I will never use FDCservers any more!
is there a way to change your server so that if you're trying to link to site.com/a/page.html through a link on site.com/b/page.html you can simply put /a/page.html instead of having to put ../a/page.html? I've noticed that some sites don't use the .. and was wondering how I could do the same.
View 1 Replies View Relatedsay you run a script like DIGG and then it just became huge and huge and one day u find out that a server cannot run it alone, that is u need to get multi servers to cope with the traffic and database requests. How would people go about doing that? Is it the script implementation side of change or just server side of change?
View 3 Replies View Relatedi want to install a red5 streaming server on FreeBSD6.2
The install was no problem and i get no errors.
So far so good.
But, i want to stream with the rtmp protocal so i used flv player to test. The link i tried was rtmp://xxx.xxx.xxx.xxx/oflaDemo/Transformers.flv (standard red5 example file)
But i get nothing on the screen, i tried a lot of other urls but no succes, red5 seems to work (see below for details)
How can i test of red5 works after a standard installation?
Netstat -ant
tcp4 0 0 xxx.xxx.xxx.xxx.1935 *.* LISTEN
tcp4 0 0 xxx.xxx.xxx.xxx.5080 *.* LISTEN
tcp4 0 0 xxx.xxx.xxx.xxx.8088 *.* LISTEN
conf/red5.properties
# HTTP
http.host=xxx.xxx.xxx.xxx
http.port=5080
# RTMP
rtmp.host=xxx.xxx.xxx.xxx
rtmp.port=1935
rtmp.event_threads_core=16
rtmp.event_threads_max=32
# event threads queue: -1 unbounded, 0 direct (no queue), n bounded queue
rtmp.event_threads_queue=-1
rtmp.event_threads_keepalive=60
rtmp.send_buffer_size=271360
rtmp.receive_buffer_size=65536
rtmp.ping_interval=5000
rtmp.max_inactivity=60000
# RTMPT
rtmpt.host=xxx.xxx.xxx.xxx
rtmpt.port=8088
rtmpt.ping_interval=5000
rtmpt.max_inactivity=60000
# Debug proxy (needs to be activated in red5-core.xml)
proxy.source_host=127.0.0.1
proxy.source_port=1936
proxy.destination_host=127.0.0.1
proxy.destination_port=1935
we've been running our software on apache 1.3 for years with no problems. We have a new server running apache2 and now none of our mod_rewrite works. Is there something extra that needs to be done with apache 2 to get mod_rewrite working? The module is definitely loaded (first thing I checked). If we turn on allowOverride from None to All in the httpd.conf we get completely blank pages. Our regular php pages work fine with allowoverride set to none, but they all break when it is set to all. Please help. This is the second time we have run into this on apache 2 servers.
View 2 Replies View RelatedI have a dedicated server with a provider. They have a notice period of 30 days, to cancel the server. The billing date of the server is 13th of every month.
I sent them the cancellation form on 30th of last month, asking them to terminate the server by 1st of next month (thereby 30 days notice). But they say that they will bill me on this 13th for another full month, and they'll cancel the server only on 13th of next month! WTF? So, the notice period becomes 43 days!
I have never experienced something like this with other providers I'm using but just wanted to know..
cheapest dedicated to be used as a remote backup server. This server will be used to backup the fiels of other servers. We need this server to have raid1 or raid5 and at least 1TB of available hard disk space (we want to pay one time fee for the HDs, not monthly).
We've looked into the cheapest (server4you, serverpront) but their cheapest servers can't be customized.
As we are looking for cheapest solutions we are going to have a copy of this backup on another (cheap) DC. So we need 2 cheap places.
I am running FC2 with cPanel.
My server stopped responding to everything from http to ping and I had to do a hard reboot on it.
Now, I'd like to figure out what happened but am not sure where to start. I've been sifting through /var/log/messages but can't pin point what I'm looking for.