i am hosting a GunZ Server on a VPS,
i wana to open 2 servers, ( Quest / clan ) 2 names,
but, i can'T open the 2, only 1 if i opened the 2 one of them is getting for all palyers 999 ping ( Agent Error )...
well this is may caused by AE, how can i fix this?
15ms ping vs 40ms ping vs 170ms ping
Which you think is still acceptable for a website?
I have 2 CPanel servers. I wanted to transfer multiple accounts via WHM but it gives me error that I cannot SSH into the other server.
I tried to ping the 2nd server from 1st server and it gives me:
root@s [~]# ping xxx.xxx.xxx.7
PING xxx.xxx.xxx.7 (xxx.xxx.xxx.7) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
cping: sendmsg: Operation not permitted
I added both server IP into allowed list inside my APF firewall on each server as well.
I rebooted both server earlier before, but it is still not solving my problem.
I have a problem with my server, that i can't not ping
Quote:
[root@server apf-0.9.6-2]# ping yahoo.com
ping: unknown host yahoo.com
But i can log in the ssh. i just installed apf, i check conf.apf to made sure there are port 80, but it still can't ping.
So I'm wondering what if anything I can do to get a better ping from my 1and1 server.
It's located in Wayne, PA and my ping floats around 70ms and I'm in South Lake Tahoe, CA. I only ask because there are servers with Peer1 hosted in New York, NY that give me a ping around 20ms.
Thanks for any help or advice.
Its a Windows Server 2008 Web Box.
I have a domain name for example test.com, and have subdomains for it 1.test.com and mail.test.com
main domain working fine but both of subdomains not working in webbrowser they just reply ping requests
ping 1.test.com.
it's output of /etc/init.d/named status
number of zones: 12
debug level: 0
xfers running: 0
xfers deferred: 0
soa queries in progress: 0
query logging is OFF
server is up and running
O.S: CentOS release 4.4 (Final)
DNS: bind-9.2.4-16.EL4
Apache: httpd-2.0.52-28.ent.centos4
CPanel: None
Please note that is all is working fine over a 3 year just stopping today
Server load is under 1, nearly 0 io.
Ping between 200-300, normally it is around 50.
DC says their network is fine and it is my server.
So load under 1, almost no hard drive access, why is the ping so high?
globichen can explain about this.
ping timeout happen frequently.
this is the 2nd time happen in a week
i've submit a ticket regarding about this
customer service replies with server is online.
i'm not bashing their service but frequently ping timeout really makes my business down lately.
Loading website takes a few min & even couldn't access to server due to ping timeout.
I just installed a fresh new server with CSF
Soon I find out that my ping keeps dropping. The server was smoothly running, SSH is smooth, Website are loading fine, except I cannot ping my server. I disable SELINUX completely and it still doesn't help.
When I disable CSF, my server ping are responding back!
So I remove CSF installation and reinstall CSF, the same problem appear
How can I solve this issue?
My kernel is 2.6.18-92.1.6.el5PAE running on latest version of cPanel on CentOS 5.1
I got this domain hosted on my server where i can't ping or trace it. Every setting seem to be correct, the ip address, name server...etc. and other websites hosted on the server is working fine. i can reach other websites with no problem but not this domain.
how do i trouble shoot such problem? would deleted the website and recreate solve it?
has anyone ever come across such strange problem?
Here are the Servers IPs which are all located @ Malaysia but different datacenter:
Server 1:
Data Center: Brickfield
IP: 202.75.55.188
Server 2:
Data Center: Jaring
IP: 202.190.175.218
Server 2:
Data Center: Cyberjaya
IP: 202.71.103.132
I have a problem with one of my domain. Some users around the world cannot access the website, but they can ping and traceroute the server without any problems. I am able to access the website perfectly.
Site URL is www.djluv.in
And we are using IPB 2.2
Moreover if theres another domain on the same server, they can access it.
There are about 25-30 users who are facing this problem, but from different part of the world so I cant even say ISP problem.
APF has been shutdown, no Ban Filters on IPB or cpanel.
What are the possible reasons why they couldn't access the website? how to fix the problem?
I am facing high ping and packet loss issues with a server hosted at hetzner.de (CentOS + WHM)
For some unknown reason pings go high and stay like this (average 1500ms) until I reboot the server.
Here is a screenshot of tracert from server to me: [url]
I'm having a very odd problem with one of my Linux (CentOS) cpanel server, all the server's services (http, ssh, mail, dns, etc) stop responding but the server still responds to ping.
I can't find anything wrong at all on the log files either, and the technicians that manually restart the server have told me that there is no indication of a problem on the screen.
I suspected a hardware issue and had the data center techs run a hardware test on the server but everything cleared ok.
This issue started a couple of weeks ago, no major upgrade or install took place when it started happening. From what i can see the halts are completely random, some times it goes for days without it happening and some times it happens just hours after the reboots.
My server DC technician change the cable to another switch in another rack. all in sudden, my server went 'offline'.
the weird thing is,
I can ping the server IP
When I plug my KVM,
I can ping google.com from my server
But when I lynx google.com, it keep saying
HTTP requests sent; waiting for response._
When I open my putty and SSH, it keep waiting.
When I try to ssh from another server, it keep waiting
$ ssh school@xxx.xxx.xxx.xx
[nothing happen]
$ ping xxx.xxx.xxx.xx
PING xxx.xxx.xxx.xx (xxx.xxx.xxx.xx) 56(84) bytes of data.
64 bytes from xxx.xxx.xxx.xx: icmp_seq=1 ttl=63 time=1.10 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=2 ttl=63 time=0.864 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=3 ttl=63 time=0.854 ms
- I can ping my server from MS DOS
- I can ping my server from Iptools.com
- I can ping my server from another server
But..
- I cannot ssh into my server
- I cannot ssh into my server from another server
Inside my server..
- I can ping google.com, yahoo.com, other servers
- But I cannot lynx and open all websites
When I restart network, it shows [refer attachment] captured from my KVM
PING
Whats that?
after my server down, i ask for reboot then the server up again.
but i cant access SSH via my main ip, but i can access SSH via second ip. when i ping main ip, all is request time, but my second ip can ping.
ok main ip cannot use, so i use second ip the main problem come i cant do yum update kernel, will show this error
Quote:
Setting up Update Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update
when i try run socks5 proxy in my server, it running, but when i use it for my personal pc, the socks5 it not run....just show proxy is offline.
when i do wget some direct links
it always show, but never download
Quote:
[root@xxxx ~]# wget ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
--11:39:24-- ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
=> `squid-2.5.STABLE6-3.4E.12.i386.rpm'
Resolving ftp.is.co.za...
so i try to go check resolv.conf, but don have problem, my other 2 same server also dont have problem with this dns server.
I just moved from PowerVPS to EuroVPS, being located in Europe myself, and was of course hoping for much better ping times. Also EuroVPS advertise themselves with a 30ms ping to most of Europe.
Anyway after my VPS was installed I compared the pings:EuroVPS (85.17.48.162) average ping: 335ms
PowerVPS (69.65.106.19) average ping: 129ms
335ms is of course ridiculously high, and after writing them a support ticket they told me it's probably a latency problem with my ISP
Can you please post the ping you get for 85.17.48.162 (preferably people located in Europe)?
I have configured Nagios on my network 10+ Servers (Linux+Windows) now when i check through http://localhost/nagios everything is ok but only ping command is giving following message :-
Unknown
bin/ping -n -U -w 10 -c 5 x.x.x.x
CRITICAL - Could not interpret output from ping command
and mail me "server down " message
So what is the issue ?
I am able to run this command through command line
./check_ping -H {server} -w 100.0,20% -c 500,50% -p 5
PING OK - Packet loss = 0%
./check_ping -H x.x.x.x -w 300.0,80% -c 500.0,100% -p 5
PING OK - Packet loss = 0%
I'm running my own OpenVZ server with a few VPS's running on it and have a small network issue.
I can't ping any VE from the HN. All the other networking is working ok (strangely I can ping the HN from the VE) apart from this. It's a simple setup with one network card connected to the internet.
OpenVZ the latest stable version running on CentOS 5.2
I'm pretty sure it's not a firewall problem but is something to do with arp or routing and one of the settings in sysctl.conf
Has anyone else seen this?
Does it matter?
I did a few tests
Pinging lunarpages.com [74.50.4.210] with 32 bytes of data:
Average = 191ms
Pinging hostmonster.com [74.220.195.150] with 32 bytes of data:
Average = 191ms
Pinging godaddy.com [97.74.104.201] with 32 bytes of data:
Average = 175ms
Pinging rackspace.com [72.32.191.88] with 32 bytes of data:
Average = 150ms
Pinging siteground.com [209.85.102.36] with 32 bytes of data:
Average = 148ms
Pinging hostgator.com [74.54.219.185] with 32 bytes of data:
Average = 147ms
Pinging ipowerweb.com [66.96.130.200] with 32 bytes of data:
Average = 113ms
The pages load really fast @ ipowerweb
i've only ever used pings to test if a host is up or down.
But what other information am i looking for in ping tests. For e.g., the time in ms the TTL etc etc?
How can i test pinging my server from different locations around the world?
i install one xen guest ( centos5)
i run yum update and result is :
-bash-3.1# yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories
Could not retrieve mirrorlist http://mirrorlist.centos.org/?releas...86&repo=extras error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot find a valid baseurl for repo: extras
i use of middle config :
/etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.0.255
IPADDR=192.168.0.13
IPV6ADDR=
IPV6PREFIX=
NETMASK=255.255.255.0
NETWORK=192.168.0.0
ONBOOT=yes /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=myhost.l3i.ca
GATEWAY=192.168.0.1 /etc/resolv.conf (DNS resolver)
nameserver 4.2.2.1
nameserver 4.2.2.2
My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (all-nettools.com, dnsstuff.com, etc.) and host unreachable.
I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.
My server ping keeps disconnecting
However my ssh & website is smooth running!
When i type "service iptables stop", the ping runs just smoothly.
I have CSF installed in the server, like any other server using default configurations. I believe it has something to do with selinux? (or not?)
i think 216.245.208.x and 216.245.215.x DOWN, but limestonenetworks tell me :"problems well outside of our network, and I would highly suggest contacting your ISP for support on this matter" ....
View 9 Replies View RelatedMust an IP address have to be pingable for apache to be seen.
I've set up an apache server at home and I noticed that if I block ping requests, no one can see i externally.
If I enable ping requests people can visit my site/server.
Can I have some of you ping 24fans.net and let me know what your results are? Also where you're located would be good.
My ISP is being crappy and my dsl line is basically down ever few minutes. They're supposed to fix it tomorrow.
My current results are:
Reply from 70.84.145.91: bytes=32 time=66ms TTL=51
Reply from 70.84.145.91: bytes=32 time=59ms TTL=51
Reply from 70.84.145.91: bytes=32 time=65ms TTL=51
Reply from 70.84.145.91: bytes=32 time=58ms TTL=51
This doesn't really have anything to do with my dsl being crappy, but rather I'm just curious as to what kind of responses people are getting around the world.
A website,which i can't access,but i used the ping and tracert instruct. the result tell me the IP and route is right.later,a use a Proxy site to access that site,it can. who knows the reason?
View 1 Replies View RelatedI installed net query tool from this site
http://virtech.org/tools/
They say in order for ping and trace to work, you must chmod those executables on the server itself to 755. Is this safe or a security risk? The odd thing is, ping and trace works fine from dnsstuff.com or any other network tool site.
What is the location of those executables?