OpenVZ - HN Can't Ping VE
I'm running my own OpenVZ server with a few VPS's running on it and have a small network issue.
I can't ping any VE from the HN. All the other networking is working ok (strangely I can ping the HN from the VE) apart from this. It's a simple setup with one network card connected to the internet.
OpenVZ the latest stable version running on CentOS 5.2
I'm pretty sure it's not a firewall problem but is something to do with arp or routing and one of the settings in sysctl.conf
Has anyone else seen this?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Invalid Command 'php_flag' - After Recompiling PHP & Apache?
After I recompiled Apache and PHP using easyapache from cPanel, we started getting all these weird errors. I'm getting a few people now complaining about not being able to enable register_globals. I believe (after searching) that having this enabled is a big security risk and shouldn't need to be used. However, some people apparently where using .haccess and php_flag to enable this. I did find on a few places that people can create their own php.ini file to emulate what was previously done with .htaccess? After searching around.. I found out that Register Globals can become a security risk based on the scripts configuration that uses it. This feature normally can be enabled via .htaccess using the glad "php_flag register_globals On". Creating a file called php.ini inside the directory of the site with the flag "register_globals=on" I believe will also enable this option. To enable this option on a global scale, you can edit '/usr/local/cpanel/3rdparty/etc/php.ini', but its not recommended. However.. We are unable to get the php.ini concept to work. Is there something I need to do to enable/allow users to do this for their account?
View Replies!
View Related
Any 'easy' Smtp / Pop / Imap Package Or Installer W/o Having To Read Up On Exim Etc.?
any 'easy' smtp / pop / imap package or installer w/o having to read up on exim etc.? I want an email server quickly, w/o having to become an expert... I'd go w/ a hosted service, but I open allot of pop3 connections... (program I use downloads one email, closes connection, reopens... repeat)... There's lots of cookbooks out there, but they require quite a bit more time commitment (and configurability) than I want / need. Is there any dumbified installs available? I tried with webmin, but even that wants me to manually configure a postfix / imap server bridge.=
View Replies!
View Related
Qmail - I'm Afraid I Wasn't Able To Deliver Your Message
Basically a client has been getting really bad email problems with their email. They keep getting the standard qmail msg back from several emails. I originally thought this msg was being returned as it was an invalid receipients address, but they are assuring me that this is not the case? Anyway the basic msg they are getting is: Hi. This is the qmail-send program at p16489287.pureserver.info. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out ....
View Replies!
View Related
BoxVPS = Useless | STAY AWAY From This 'company'
URL: http://www.boxvps.com Their recent promotion thread: http://www.webhostingtalk.com/showthread.php?t=889733 Extremely non-professional service. Took them 48 hours to setup my VPS. Also had to create a support ticket. And when it was finally delivered, there was no DirectAdmin on it. Specially disturbing, since I actually paid for a monthly license. Not to mention that their responses are very vague. They claim to apply the promotions (triple disk space, double bandwidth) 24 hours after they setup the VPS. I have no idea why they do that. Moreover, they have false advertising on their VPS page (Instant Activation..where it should read 'We don't activate your VPS unless you create a support ticket). A speedtest from the VPS showed that the VPS is capable of bursting to a maximum of 10mbps, while average speed is barely 2mbps. Stay away from these guys. They're potential scammers. They WILL scam.. sooner or later.
View Replies!
View Related
Looking For Host That Supports $_SERVER['PATH_INFO']
I am finishing up on my clients site and the ecommerce software we use has an option for search engine friendly URL's but your server must support $_SERVER['PATH_INFO'] . My client is hosted by GoDaddy and my host (HostGator) does not support it unless you go dedicated. I need $_SERVER['PATH_INFO'] Dedicated IP, PHP, MySQL, .htaccess support preferably CPanel - not Plesk Less than $120 / year I am looking for a well established company like the ones I previously mentioned because my client wants peace of mind and I don't want to screw him over.
View Replies!
View Related
What Is The Reverse Command For 'mount --bind'
A few days ago, when installing TUX, I have mounted the virtual hosting directory to var/www/html/mywebsite.com (that's an empty directory I created in order for TUX to work) via: mount --bind /home/virtual/site1/fst/var/www/html/ /var/www/html/mywebsite.com/ command..... After figuring out that TUX has some problems I reverted everything but not this mount --bind command.. What is the reverse command for this, so everything will come back to the point which they were before?
View Replies!
View Related
Cloud Hosting - To Me A 'Blackbox'
Cloud hosting is still a 'blackbox' to me ... hope anyone can answer me. I have 5 questions to start the discussion with. What is cloud hosting? Is it cheaper than (shared/dedicated/semi-dedicated) server hosting? Is it secure? How many SSL license I need to purchase if I host my website (one website) in cloud? Which cloud hosting you recommend and why?
View Replies!
View Related
Can Ping But Cannot Go In
My server DC technician change the cable to another switch in another rack. all in sudden, my server went 'offline'. the weird thing is, I can ping the server IP When I plug my KVM, I can ping google.com from my server But when I lynx google.com, it keep saying HTTP requests sent; waiting for response._ When I open my putty and SSH, it keep waiting. When I try to ssh from another server, it keep waiting $ ssh school@xxx.xxx.xxx.xx [nothing happen] $ ping xxx.xxx.xxx.xx PING xxx.xxx.xxx.xx (xxx.xxx.xxx.xx) 56(84) bytes of data. 64 bytes from xxx.xxx.xxx.xx: icmp_seq=1 ttl=63 time=1.10 ms 64 bytes from xxx.xxx.xxx.xx: icmp_seq=2 ttl=63 time=0.864 ms 64 bytes from xxx.xxx.xxx.xx: icmp_seq=3 ttl=63 time=0.854 ms - I can ping my server from MS DOS - I can ping my server from Iptools.com - I can ping my server from another server But.. - I cannot ssh into my server - I cannot ssh into my server from another server Inside my server.. - I can ping google.com, yahoo.com, other servers - But I cannot lynx and open all websites When I restart network, it shows [refer attachment] captured from my KVM
View Replies!
View Related
IP (ping)
after my server down, i ask for reboot then the server up again. but i cant access SSH via my main ip, but i can access SSH via second ip. when i ping main ip, all is request time, but my second ip can ping. ok main ip cannot use, so i use second ip the main problem come i cant do yum update kernel, will show this error Quote: Setting up Update Process Setting up repositories Cannot find a valid baseurl for repo: update Error: Cannot find a valid baseurl for repo: update when i try run socks5 proxy in my server, it running, but when i use it for my personal pc, the socks5 it not run....just show proxy is offline. when i do wget some direct links it always show, but never download Quote: [root@xxxx ~]# wget ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm --11:39:24-- ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm => `squid-2.5.STABLE6-3.4E.12.i386.rpm' Resolving ftp.is.co.za... so i try to go check resolv.conf, but don have problem, my other 2 same server also dont have problem with this dns server.
View Replies!
View Related
Ping In Nagios
I have configured Nagios on my network 10+ Servers (Linux+Windows) now when i check through http://localhost/nagios everything is ok but only ping command is giving following message :- Unknown bin/ping -n -U -w 10 -c 5 x.x.x.x CRITICAL - Could not interpret output from ping command and mail me "server down " message So what is the issue ? I am able to run this command through command line ./check_ping -H {server} -w 100.0,20% -c 500,50% -p 5 PING OK - Packet loss = 0% ./check_ping -H x.x.x.x -w 300.0,80% -c 500.0,100% -p 5 PING OK - Packet loss = 0%
View Replies!
View Related
Better The Ping The Better The Host
Does it matter? I did a few tests Pinging lunarpages.com [74.50.4.210] with 32 bytes of data: Average = 191ms Pinging hostmonster.com [74.220.195.150] with 32 bytes of data: Average = 191ms Pinging godaddy.com [97.74.104.201] with 32 bytes of data: Average = 175ms Pinging rackspace.com [72.32.191.88] with 32 bytes of data: Average = 150ms Pinging siteground.com [209.85.102.36] with 32 bytes of data: Average = 148ms Pinging hostgator.com [74.54.219.185] with 32 bytes of data: Average = 147ms Pinging ipowerweb.com [66.96.130.200] with 32 bytes of data: Average = 113ms The pages load really fast @ ipowerweb
View Replies!
View Related
Ping Tests
i've only ever used pings to test if a host is up or down. But what other information am i looking for in ping tests. For e.g., the time in ms the TTL etc etc? How can i test pinging my server from different locations around the world?
View Replies!
View Related
Ping Is Down, Http Is Up
My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (all-nettools.com, dnsstuff.com, etc.) and host unreachable. I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.
View Replies!
View Related
Selinux (ping)
My server ping keeps disconnecting However my ssh & website is smooth running! When i type "service iptables stop", the ping runs just smoothly. I have CSF installed in the server, like any other server using default configurations. I believe it has something to do with selinux? (or not?)
View Replies!
View Related
Test PING
i think 216.245.208.x and 216.245.215.x DOWN, but limestonenetworks tell me :"problems well outside of our network, and I would highly suggest contacting your ISP for support on this matter" ....
View Replies!
View Related
Apache Ping
Must an IP address have to be pingable for apache to be seen. I've set up an apache server at home and I noticed that if I block ping requests, no one can see i externally. If I enable ping requests people can visit my site/server.
View Replies!
View Related
Ping Request
Can I have some of you ping 24fans.net and let me know what your results are? Also where you're located would be good. My ISP is being crappy and my dsl line is basically down ever few minutes. They're supposed to fix it tomorrow. My current results are: Reply from 70.84.145.91: bytes=32 time=66ms TTL=51 Reply from 70.84.145.91: bytes=32 time=59ms TTL=51 Reply from 70.84.145.91: bytes=32 time=65ms TTL=51 Reply from 70.84.145.91: bytes=32 time=58ms TTL=51 This doesn't really have anything to do with my dsl being crappy, but rather I'm just curious as to what kind of responses people are getting around the world.
View Replies!
View Related
Ping My VPS
I just moved from PowerVPS to EuroVPS, being located in Europe myself, and was of course hoping for much better ping times. Also EuroVPS advertise themselves with a 30ms ping to most of Europe. Anyway after my VPS was installed I compared the pings:EuroVPS (85.17.48.162) average ping: 335ms PowerVPS (69.65.106.19) average ping: 129ms 335ms is of course ridiculously high, and after writing them a support ticket they told me it's probably a latency problem with my ISP Can you please post the ping you get for 85.17.48.162 (preferably people located in Europe)?
View Replies!
View Related
1and1 Server Ping
So I'm wondering what if anything I can do to get a better ping from my 1and1 server. It's located in Wayne, PA and my ping floats around 70ms and I'm in South Lake Tahoe, CA. I only ask because there are servers with Peer1 hosted in New York, NY that give me a ping around 20ms. Thanks for any help or advice. Its a Windows Server 2008 Web Box.
View Replies!
View Related
Ping And Traceroute Executables
I installed net query tool from this site http://virtech.org/tools/ They say in order for ping and trace to work, you must chmod those executables on the server itself to 755. Is this safe or a security risk? The odd thing is, ping and trace works fine from dnsstuff.com or any other network tool site. What is the location of those executables?
View Replies!
View Related
Ping In Vlans Not Working?
I have two servers both in a same vlan. Both may access Internet and be acceessed from Internet I setup db server and web server internal IP each as follows: step 1: on web server: vi /etc/sysconfig/network-scripts/ifcfg-eth0:0 add following: DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.1.255 IPADDR=192.168.1.5 NETMASK=255.255.255.248 NETWORK=192.168.1.0/24 ONBOOT=yes TYPE=Ethernet save and /etc/init.d/network restart step 2: on db server: vi /etc/sysconfig/network-scripts/ifcfg-eth0:0 add following: DEVICE=eth0:0 BOOTPROTO=static BROADCAST=192.168.1.255 IPADDR=192.168.1.10 NETMASK=255.255.255.248 NETWORK=192.168.1.0/24 ONBOOT=yes TYPE=Ethernet save and /etc/init.d/network restart I used ifconfig to check both status, both of them are up. both of them may ping google, but when I try to ping their each other through internal IP, nothing returns. I used command tracert to follow, found all packages were sent to Internet rather than an internal IP. My host tells me to do it by making NAT, I have no idea on it. Anyone may help me out on how to do with NAT?
View Replies!
View Related
Ping :: Is My Host Slow
I am hosting some sites with innohosting and it seems they are loading slow. This could be because of my internet so im not sure. My ping is below. What is considered good? 64 bytes from 67.220.209.81: icmp_seq=0 ttl=39 time=87.104 ms 64 bytes from 67.220.209.81: icmp_seq=1 ttl=39 time=89.647 ms 64 bytes from 67.220.209.81: icmp_seq=2 ttl=39 time=110.035 ms 64 bytes from 67.220.209.81: icmp_seq=3 ttl=39 time=130.241 ms 64 bytes from 67.220.209.81: icmp_seq=4 ttl=39 time=139.109 ms 64 bytes from 67.220.209.81: icmp_seq=5 ttl=39 time=163.304 ms 64 bytes from 67.220.209.81: icmp_seq=6 ttl=39 time=96.559 ms 64 bytes from 67.220.209.81: icmp_seq=7 ttl=39 time=96.478 ms 64 bytes from 67.220.209.81: icmp_seq=8 ttl=39 time=103.415 ms 64 bytes from 67.220.209.81: icmp_seq=10 ttl=39 time=111.042 ms 64 bytes from 67.220.209.81: icmp_seq=11 ttl=39 time=118.234 ms 64 bytes from 67.220.209.81: icmp_seq=12 ttl=39 time=94.255 ms 64 bytes from 67.220.209.81: icmp_seq=13 ttl=39 time=86.390 ms 64 bytes from 67.220.209.81: icmp_seq=14 ttl=39 time=95.784 ms 64 bytes from 67.220.209.81: icmp_seq=15 ttl=39 time=89.193 ms I have a lot of sites with big graphics that need to load fast.
View Replies!
View Related
Is Ping Time Important
When I talked with my friends who are into computer stuff, they'd say that it is important that the provider that I am about to host my site with, has good ping response so that my site will load faster.
View Replies!
View Related
Packet Loss On Ping
Basically I registered with a new host. They sent me the details with obviously includes the IP address. I tested the IP address on just-ping.com and it came back with all of them having between 80% to 100% packet loss. Surely this is not normal is it? I havent moved my domain yet but it doesnt look good does it? Should I cancel?
View Replies!
View Related
My Ping/packets Lost
I'm getting slow server response times I've been struggling with this for quite some while. Here is what I know so far: 1. My website divinelightingdotcom through justping returns average 60-80% packets lost for all locations but Santa Clara, which usually has 0-20% loss. 2. My VPS is in Dallas 3. My ISP is also in Dallas, yet justping their website returns 0 packets lost 4a. When I ping my site from Atlanta, the avg trip is 44 ms 4b. However, the first access of my website through a browser usually takes about 5-10 seconds to respond 4c. I assume that my customers have this same experience (if so, this is killing me on my sponsored search advertising) 5. subsequent navigation through the website is usually acceptably fast. 6. wait an hour or so, and the initial page load has 5-10 second response delay again (can be any page on the site) 7. perhaps related, WinMTR from my location in Atlanta shows an comcast IP in virginia that consistently has 20% loss. I have opened a trouble ticket with Comcast.
View Replies!
View Related
Ping From Multi Locations
I was on this site a while ago and someone shared a link to a site that would ping a given IP from multiple locations around the globe and give the output. Does anyone know of a site that would do this?
View Replies!
View Related
Cant Ping My Own IP From Remote Computer
my server is running with a static ip. while im going through this trial and error process of registering my name servers i should at least be able to ping my server from a remote computer shouldnt i? it just keeps timing out but i figured at least that much should work.
View Replies!
View Related
Ping Rates - Should I Be Concerned
I currently have a server sitting with Provider A and another server sitting on provider B. I only recently purchased the server with provider B and planned to phase out server A. My concern is, when I ping both servers from the same location, server B's times are nearly twice server B (90+ ms versus 48ms). How big of a difference will larger ping times like this make with respect to the end user (e.g., web page loading, etc?)
View Replies!
View Related
Ping Time Significant
We're considering moving from our current vps host with a California datacenter to a host with their datacenter in Chicago for support reasons... this will mean going from 15 ms ping times to around 75 ms. All of our clients will be running their own wordpress installations...and most of them are on the west coast as well... is the ping time difference significant or not?
View Replies!
View Related
Cannot Ping Ssh To Other Server
I have 2 CPanel servers. I wanted to transfer multiple accounts via WHM but it gives me error that I cannot SSH into the other server. I tried to ping the 2nd server from 1st server and it gives me: root@s [~]# ping xxx.xxx.xxx.7 PING xxx.xxx.xxx.7 (xxx.xxx.xxx.7) 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted cping: sendmsg: Operation not permitted I added both server IP into allowed list inside my APF firewall on each server as well. I rebooted both server earlier before, but it is still not solving my problem.
View Replies!
View Related
Ping No Buffer Space Available
i have a custom setup, front end, that serves the apache requests, and a remote SQL Server. the SQL traffic runs on the internal network. the front end runs freebsd 6.2, and apache 2.2 with php 5.2.5 the sql server runs centos 5.1, and mysql 5.0.45 tonight, i found that my website was not working, i logged in, and i saw that when i tried to ping the internal network, i had that error: ping No buffer space available i was trying to ping the sql server, from the front end. the sql server worked fine, i could ping other servers in the internal network, but the front end's internal card allowed no traffic. I tried restarting the internal network card, state up/down, did not solve the issue.
View Replies!
View Related
Understanding Ping/traceroute Times?
I'm looking into knownhost and they offer twice the bandwidth in their California option for the same money. Jay from known host said I should pick the one with the best ping times. I'd like to put the information here so someone might perhaps tell me what my best choice is. I'll put the stats here and then if you could tell me which one is better (Texas vs. California) that would be great. But if you think that the times between the two are only marginal (both real good), then could you help me decide about getting double the bandwidth for the same price. I know nothing of course, but the two data centers look like their both giving great speeds (Texas being better though). But perhaps both speeds are great. If that's the case, can anyone tell me why someone would not take the higher bandwidth offer? Thanks, I really appreciate any help with this! Here is the info... Texas (ping): PING 65.99.213.7 (65.99.213.7) 56(84) bytes of data. 64 bytes from 65.99.213.7: icmp_seq=1 ttl=56 time=1.26 ms 64 bytes from 65.99.213.7: icmp_seq=2 ttl=56 time=1.35 ms 64 bytes from 65.99.213.7: icmp_seq=3 ttl=56 time=1.41 ms 64 bytes from 65.99.213.7: icmp_seq=4 ttl=56 time=1.22 ms 64 bytes from 65.99.213.7: icmp_seq=5 ttl=56 time=1.51 ms .............
View Replies!
View Related
Server.lu Having Frequently Ping Timeout
globichen can explain about this. ping timeout happen frequently. this is the 2nd time happen in a week i've submit a ticket regarding about this customer service replies with server is online. i'm not bashing their service but frequently ping timeout really makes my business down lately. Loading website takes a few min & even couldn't access to server due to ping timeout.
View Replies!
View Related
Ping Problem In Vps Xen
i install one xen guest ( centos5) i run yum update and result is : -bash-3.1# yum update Loading "installonlyn" plugin Setting up Update Process Setting up repositories Could not retrieve mirrorlist http://mirrorlist.centos.org/?releas...86&repo=extras error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')> Error: Cannot find a valid baseurl for repo: extras i use of middle config : /etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.13 IPV6ADDR= IPV6PREFIX= NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes /etc/sysconfig/network NETWORKING=yes HOSTNAME=myhost.l3i.ca GATEWAY=192.168.0.1 /etc/resolv.conf (DNS resolver) nameserver 4.2.2.1 nameserver 4.2.2.2
View Replies!
View Related
ProService Hosting Ping Pong
Not that long ago we got notification from AxisHOST that they owned ProService Hosting and our accounts will be moved to their server. New IPs, new "negotiations" about old "per lifetime" deals, etc... [url] Ok, fine... but what's this mail now: Quote: ProService Hosting System Message: 10/03/2008 02:39 PM Hello Everyone,I have finished moving everyone's account to our server. If you would please update your DNS settings to NS1.ERUPT.COM and NS2.ERUPT.COM. You need to make these changes at your domain registrar. If you need any help with this please contact me.I will begin to add everyone to our billing system today. You should expect an email from Erupt.com with your login information for our billing and support system. You will also receive a new account information, this will include our server IP address and our server login information. Your account usernames and passwords will remain the same.Anyone who has an invoice due in the next week or so I will push back a few days to give everyone some extra time. Once again I apologize about the move, I know its a hassle but we hope its the last hassle you'll have with us!Feel free to email me with any questions!-Andrewsales @ erupt.com We barely changed DNS settings and they sold us again? Without any notification.
View Replies!
View Related
Access All Sites On A Server Except One (can Ping)
I got this domain hosted on my server where i can't ping or trace it. Every setting seem to be correct, the ip address, name server...etc. and other websites hosted on the server is working fine. i can reach other websites with no problem but not this domain. how do i trouble shoot such problem? would deleted the website and recreate solve it? has anyone ever come across such strange problem?
View Replies!
View Related
Malaysia Server Ping Test
Here are the Servers IPs which are all located @ Malaysia but different datacenter: Server 1: Data Center: Brickfield IP: 202.75.55.188 Server 2: Data Center: Jaring IP: 202.190.175.218 Server 2: Data Center: Cyberjaya IP: 202.71.103.132
View Replies!
View Related
Ping: Sendmsg: Operation Not Permitted
I've noticed that my site has delays every few seconds when using the database. At least 2-4 seconds. Now the load is 0.05 basically. So I did a ping from my webserver to the db server and got: PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.138 ms ping: sendmsg: Operation not permitted 64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.086 ms 64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.104 ms ping: sendmsg: Operation not permitted I then turned off iptables and it works fine now. How to know what's causing this?
View Replies!
View Related
Ping Host.com => Request Timed Out
# how can we turn this request on our firewall ? C:Documents and SettingsOx>ping www.host.com Pinging webhostingtalk.com [xx.xx.xx.x] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for xx.xx.xx.x : Packets: Sent = 4, Received = 0, Lost = 4 (100% loss ), # and how to secure our server from SYN Flood DoS Attack Experiments?
View Replies!
View Related
Ping Results For My VPS - Acceptable
We run our company website on a VPS. Now we do notice, that quite frequently, the connection times out or the server responds slowly. A friend of mine said the VPS could be the issue of this. I ran a ping test today for several hours, sending one ping with 16 bytes with a timeout set to 3 seconds. From 18000 pings sent (5 hours), 120 failed. Which comes to one failure in 150 pings, or one failure every 2.5 minutes. Is this still an acceptable failure rate or do I have reason to contact our VPS provider? According to our own usage statictics, we are not using much of the server's capacities.
View Replies!
View Related
|
TRACKER
