Ping Is Down, Http Is Up

Jul 23, 2008

My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (all-nettools.com, dnsstuff.com, etc.) and host unreachable.

I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.

View 1 Replies


ADVERTISEMENT

15ms Ping Vs 40ms Ping Vs 170ms Ping

Nov 2, 2008

15ms ping vs 40ms ping vs 170ms ping

Which you think is still acceptable for a website?

View 14 Replies View Related

Redirect Http:// To Http://www

Jun 23, 2008

Does anyone know how to redirect the URL of a host so that it always goes to the www subdomain? Is this done with RedirectMatch or is a rewrite rule?

View 3 Replies View Related

Http Messed Up But Not Http

Mar 31, 2008

where when I view my website through http using Firefox, it never stops loading. If I use IE, then I get a "page can not be displayed" error.

If I use https then everything works fine.

I have noticed that if I delete lines from the files, I don't have this problem.

If I try viewing images (so I know it can't be an html of php problem) some look fine (the very small files). But, larger files, around 168 kb, load halfway and the second half is distorted (green and purple chunks and other random colors and lines).

If I view the image through https, the image is perfectly fine!

If I put my site through w3.org's validator (just to see what it would report) it says "500 Line too long (limit is 4096)".

My website used to work, so I know there isn't any code in the pages that would cause this to happen.

Is there an Apache setting I check? Perhaps it is sending a really long header that I can not see? I am not really sure what to do. I have made my site to force https but it's slow and not signed.

View 6 Replies View Related

Can Ping But Cannot Go In

Jun 6, 2008

My server DC technician change the cable to another switch in another rack. all in sudden, my server went 'offline'.

the weird thing is,
I can ping the server IP

When I plug my KVM,
I can ping google.com from my server

But when I lynx google.com, it keep saying
HTTP requests sent; waiting for response._

When I open my putty and SSH, it keep waiting.

When I try to ssh from another server, it keep waiting
$ ssh school@xxx.xxx.xxx.xx
[nothing happen]
$ ping xxx.xxx.xxx.xx
PING xxx.xxx.xxx.xx (xxx.xxx.xxx.xx) 56(84) bytes of data.
64 bytes from xxx.xxx.xxx.xx: icmp_seq=1 ttl=63 time=1.10 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=2 ttl=63 time=0.864 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=3 ttl=63 time=0.854 ms

- I can ping my server from MS DOS
- I can ping my server from Iptools.com
- I can ping my server from another server

But..
- I cannot ssh into my server
- I cannot ssh into my server from another server

Inside my server..
- I can ping google.com, yahoo.com, other servers
- But I cannot lynx and open all websites

When I restart network, it shows [refer attachment] captured from my KVM

View 6 Replies View Related

What Is PING?

Oct 23, 2008

PING

Whats that?

View 5 Replies View Related

IP (ping)

Feb 5, 2007

after my server down, i ask for reboot then the server up again.

but i cant access SSH via my main ip, but i can access SSH via second ip. when i ping main ip, all is request time, but my second ip can ping.

ok main ip cannot use, so i use second ip the main problem come i cant do yum update kernel, will show this error

Quote:

Setting up Update Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update

when i try run socks5 proxy in my server, it running, but when i use it for my personal pc, the socks5 it not run....just show proxy is offline.

when i do wget some direct links

it always show, but never download

Quote:

[root@xxxx ~]# wget ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
--11:39:24-- ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
=> `squid-2.5.STABLE6-3.4E.12.i386.rpm'
Resolving ftp.is.co.za...

so i try to go check resolv.conf, but don have problem, my other 2 same server also dont have problem with this dns server.

View 5 Replies View Related

Ping My VPS

Jan 13, 2007

I just moved from PowerVPS to EuroVPS, being located in Europe myself, and was of course hoping for much better ping times. Also EuroVPS advertise themselves with a 30ms ping to most of Europe.

Anyway after my VPS was installed I compared the pings:EuroVPS (85.17.48.162) average ping: 335ms
PowerVPS (69.65.106.19) average ping: 129ms

335ms is of course ridiculously high, and after writing them a support ticket they told me it's probably a latency problem with my ISP

Can you please post the ping you get for 85.17.48.162 (preferably people located in Europe)?

View 6 Replies View Related

Http-put Proxy / Http-connect Proxy

Oct 28, 2007

Anyone can inform how to fix "http-put proxy" or "http-connect proxy" ?

My hosting provider said that my dedicated server is not secure because of that.

I use CentOS 4.x and only Apache 2.0.52

# rpm -qa | grep htt
httpd-2.0.52-28.ent.centos4
httpd-suexec-2.0.52-28.ent.centos4

I searched about the topic but got not much information.

View 0 Replies View Related

Ping In Nagios

Mar 25, 2009

I have configured Nagios on my network 10+ Servers (Linux+Windows) now when i check through http://localhost/nagios everything is ok but only ping command is giving following message :-

Unknown
bin/ping -n -U -w 10 -c 5 x.x.x.x
CRITICAL - Could not interpret output from ping command

and mail me "server down " message

So what is the issue ?

I am able to run this command through command line

./check_ping -H {server} -w 100.0,20% -c 500,50% -p 5
PING OK - Packet loss = 0%

./check_ping -H x.x.x.x -w 300.0,80% -c 500.0,100% -p 5
PING OK - Packet loss = 0%

View 10 Replies View Related

OpenVZ - HN Can't Ping VE

Jul 13, 2008

I'm running my own OpenVZ server with a few VPS's running on it and have a small network issue.

I can't ping any VE from the HN. All the other networking is working ok (strangely I can ping the HN from the VE) apart from this. It's a simple setup with one network card connected to the internet.

OpenVZ the latest stable version running on CentOS 5.2

I'm pretty sure it's not a firewall problem but is something to do with arp or routing and one of the settings in sysctl.conf

Has anyone else seen this?

View 6 Replies View Related

Better The Ping The Better The Host

Feb 10, 2009

Does it matter?

I did a few tests

Pinging lunarpages.com [74.50.4.210] with 32 bytes of data:
Average = 191ms
Pinging hostmonster.com [74.220.195.150] with 32 bytes of data:
Average = 191ms
Pinging godaddy.com [97.74.104.201] with 32 bytes of data:
Average = 175ms
Pinging rackspace.com [72.32.191.88] with 32 bytes of data:
Average = 150ms
Pinging siteground.com [209.85.102.36] with 32 bytes of data:
Average = 148ms
Pinging hostgator.com [74.54.219.185] with 32 bytes of data:
Average = 147ms
Pinging ipowerweb.com [66.96.130.200] with 32 bytes of data:
Average = 113ms
The pages load really fast @ ipowerweb

View 14 Replies View Related

Ping Tests

May 5, 2009

i've only ever used pings to test if a host is up or down.

But what other information am i looking for in ping tests. For e.g., the time in ms the TTL etc etc?

How can i test pinging my server from different locations around the world?

View 8 Replies View Related

Ping Problem In Vps Xen

Jul 8, 2008

i install one xen guest ( centos5)

i run yum update and result is :
-bash-3.1# yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories

Could not retrieve mirrorlist http://mirrorlist.centos.org/?releas...86&repo=extras error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot find a valid baseurl for repo: extras

i use of middle config :
/etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.0.255
IPADDR=192.168.0.13
IPV6ADDR=
IPV6PREFIX=
NETMASK=255.255.255.0
NETWORK=192.168.0.0
ONBOOT=yes /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=myhost.l3i.ca
GATEWAY=192.168.0.1 /etc/resolv.conf (DNS resolver)
nameserver 4.2.2.1

nameserver 4.2.2.2

View 4 Replies View Related

Selinux (ping)

Jul 26, 2008

My server ping keeps disconnecting

However my ssh & website is smooth running!

When i type "service iptables stop", the ping runs just smoothly.

I have CSF installed in the server, like any other server using default configurations. I believe it has something to do with selinux? (or not?)

View 2 Replies View Related

Test PING

Oct 26, 2008

i think 216.245.208.x and 216.245.215.x DOWN, but limestonenetworks tell me :"problems well outside of our network, and I would highly suggest contacting your ISP for support on this matter" ....

View 9 Replies View Related

Apache Ping

May 27, 2007

Must an IP address have to be pingable for apache to be seen.

I've set up an apache server at home and I noticed that if I block ping requests, no one can see i externally.

If I enable ping requests people can visit my site/server.

View 2 Replies View Related

Cannot Ping Ssh To Other Server

Mar 11, 2007

I have 2 CPanel servers. I wanted to transfer multiple accounts via WHM but it gives me error that I cannot SSH into the other server.

I tried to ping the 2nd server from 1st server and it gives me:
root@s [~]# ping xxx.xxx.xxx.7
PING xxx.xxx.xxx.7 (xxx.xxx.xxx.7) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
cping: sendmsg: Operation not permitted

I added both server IP into allowed list inside my APF firewall on each server as well.

I rebooted both server earlier before, but it is still not solving my problem.

View 10 Replies View Related

Ping Request

Jul 25, 2007

Can I have some of you ping 24fans.net and let me know what your results are? Also where you're located would be good.

My ISP is being crappy and my dsl line is basically down ever few minutes. They're supposed to fix it tomorrow.

My current results are:

Reply from 70.84.145.91: bytes=32 time=66ms TTL=51
Reply from 70.84.145.91: bytes=32 time=59ms TTL=51
Reply from 70.84.145.91: bytes=32 time=65ms TTL=51
Reply from 70.84.145.91: bytes=32 time=58ms TTL=51

This doesn't really have anything to do with my dsl being crappy, but rather I'm just curious as to what kind of responses people are getting around the world.

View 8 Replies View Related

Can't Ping To The Server But Can Log In Ssh

Jun 21, 2007

I have a problem with my server, that i can't not ping

Quote:

[root@server apf-0.9.6-2]# ping yahoo.com
ping: unknown host yahoo.com

But i can log in the ssh. i just installed apf, i check conf.apf to made sure there are port 80, but it still can't ping.

View 8 Replies View Related

1and1 Server Ping

Oct 7, 2009

So I'm wondering what if anything I can do to get a better ping from my 1and1 server.

It's located in Wayne, PA and my ping floats around 70ms and I'm in South Lake Tahoe, CA. I only ask because there are servers with Peer1 hosted in New York, NY that give me a ping around 20ms.

Thanks for any help or advice.

Its a Windows Server 2008 Web Box.

View 10 Replies View Related

Why Can Ping And Tracert? But Can't Access

Aug 20, 2009

A website,which i can't access,but i used the ping and tracert instruct. the result tell me the IP and route is right.later,a use a Proxy site to access that site,it can. who knows the reason?

View 1 Replies View Related

Ping And Traceroute Executables

Aug 13, 2008

I installed net query tool from this site
http://virtech.org/tools/

They say in order for ping and trace to work, you must chmod those executables on the server itself to 755. Is this safe or a security risk? The odd thing is, ping and trace works fine from dnsstuff.com or any other network tool site.

What is the location of those executables?

View 2 Replies View Related

Ping In Vlans Not Working?

Aug 10, 2008

I have two servers both in a same vlan. Both may access Internet and be acceessed from Internet I setup db server and web server internal IP each as follows:

step 1: on web server:

vi /etc/sysconfig/network-scripts/ifcfg-eth0:0

add following:

DEVICE=eth0:0
BOOTPROTO=static
BROADCAST=192.168.1.255
IPADDR=192.168.1.5
NETMASK=255.255.255.248
NETWORK=192.168.1.0/24
ONBOOT=yes
TYPE=Ethernet

save and /etc/init.d/network restart

step 2: on db server:

vi /etc/sysconfig/network-scripts/ifcfg-eth0:0

add following:

DEVICE=eth0:0
BOOTPROTO=static
BROADCAST=192.168.1.255
IPADDR=192.168.1.10
NETMASK=255.255.255.248
NETWORK=192.168.1.0/24
ONBOOT=yes
TYPE=Ethernet

save and /etc/init.d/network restart

I used ifconfig to check both status, both of them are up. both of them may ping google, but when I try to ping their each other through internal IP, nothing returns.

I used command tracert to follow, found all packages were sent to Internet rather than an internal IP.

My host tells me to do it by making NAT, I have no idea on it. Anyone may help me out on how to do with NAT?

View 2 Replies View Related

Should I Block Ping Requests

Jul 25, 2009

Should I block ping request to my servers from WAN?

View 12 Replies View Related

Ping :: Is My Host Slow

Oct 15, 2009

I am hosting some sites with innohosting and it seems they are loading slow. This could be because of my internet so im not sure.

My ping is below. What is considered good?

64 bytes from 67.220.209.81: icmp_seq=0 ttl=39 time=87.104 ms
64 bytes from 67.220.209.81: icmp_seq=1 ttl=39 time=89.647 ms
64 bytes from 67.220.209.81: icmp_seq=2 ttl=39 time=110.035 ms
64 bytes from 67.220.209.81: icmp_seq=3 ttl=39 time=130.241 ms
64 bytes from 67.220.209.81: icmp_seq=4 ttl=39 time=139.109 ms
64 bytes from 67.220.209.81: icmp_seq=5 ttl=39 time=163.304 ms
64 bytes from 67.220.209.81: icmp_seq=6 ttl=39 time=96.559 ms
64 bytes from 67.220.209.81: icmp_seq=7 ttl=39 time=96.478 ms
64 bytes from 67.220.209.81: icmp_seq=8 ttl=39 time=103.415 ms
64 bytes from 67.220.209.81: icmp_seq=10 ttl=39 time=111.042 ms
64 bytes from 67.220.209.81: icmp_seq=11 ttl=39 time=118.234 ms
64 bytes from 67.220.209.81: icmp_seq=12 ttl=39 time=94.255 ms
64 bytes from 67.220.209.81: icmp_seq=13 ttl=39 time=86.390 ms
64 bytes from 67.220.209.81: icmp_seq=14 ttl=39 time=95.784 ms
64 bytes from 67.220.209.81: icmp_seq=15 ttl=39 time=89.193 ms

I have a lot of sites with big graphics that need to load fast.

View 6 Replies View Related

My Server Is Getting 999 ( Lagt ) Ping!, Vps

Jan 28, 2009

i am hosting a GunZ Server on a VPS,

i wana to open 2 servers, ( Quest / clan ) 2 names,

but, i can'T open the 2, only 1 if i opened the 2 one of them is getting for all palyers 999 ping ( Agent Error )...

well this is may caused by AE, how can i fix this?

View 4 Replies View Related

Is Ping Time Important

Apr 12, 2009

When I talked with my friends who are into computer stuff, they'd say that it is important that the provider that I am about to host my site with, has good ping response so that my site will load faster.

View 14 Replies View Related

Packet Loss On Ping

Jun 10, 2009

Basically I registered with a new host. They sent me the details with obviously includes the IP address. I tested the IP address on just-ping.com and it came back with all of them having between 80% to 100% packet loss. Surely this is not normal is it? I havent moved my domain yet but it doesnt look good does it? Should I cancel?

View 14 Replies View Related

My Ping/packets Lost

Feb 20, 2008

I'm getting slow server response times I've been struggling with this for quite some while.

Here is what I know so far:

1. My website divinelightingdotcom through justping returns average 60-80% packets lost for all locations but Santa Clara, which usually has 0-20% loss.

2. My VPS is in Dallas

3. My ISP is also in Dallas, yet justping their website returns 0 packets lost

4a. When I ping my site from Atlanta, the avg trip is 44 ms

4b. However, the first access of my website through a browser usually takes about 5-10 seconds to respond

4c. I assume that my customers have this same experience (if so, this is killing me on my sponsored search advertising)

5. subsequent navigation through the website is usually acceptably fast.

6. wait an hour or so, and the initial page load has 5-10 second response delay again (can be any page on the site)

7. perhaps related, WinMTR from my location in Atlanta shows an comcast IP in virginia that consistently has 20% loss. I have opened a trouble ticket with Comcast.

View 5 Replies View Related

Ping From Multi Locations

Jun 17, 2008

I was on this site a while ago and someone shared a link to a site that would ping a given IP from multiple locations around the globe and give the output. Does anyone know of a site that would do this?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved