How can i access webmail in plesk ? If i access webmail.domain.com, it says page cannot be loaded. Also, same for domain.com/webmail
Then I logged in to plesk >> Domain >> Mail >> Preference and tried to enable webmail.
It says "Component not installed"
I have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.
However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."
I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.
What must I do to enable webmail?
i recently purchased a VPS Server from OVH, So far all is good with it, I have 4 domains parked off in a local South African Server that using DNS Records are pointing to the VPS Servers. The website etc is all displayed 100% so no issues there.My problem comes with email, Generally I use GMAIL to access all my emails using their POP3 and SMTP Feature by just putting in the details like how outlook is. Unfortunately it keeps on saying connection timed out and at times says another error to do with denying access.
So then I try accessing my email using the webmail interface, Im using mailenable and mailenable webmail, I cannot access the webmail through the panel neither can I access it using the link webmail.domain.com or webmail.domain.com/mewebmail/ as it gives the following error:
Service Unavailable: HTTP Error 503. The service is unavailable.
My setup for my emails is as follows: I have 4 domains (for example sake lets call it domain1, domain2, domain3, domain 4) now domain2,3 and 4 3 individual email addresses with no mailboxes as I set it up on plesk so that all email from there gets forwarded to main Domain calling it domain1. like info@domain1.com.In this way I do not have to open so many and all email found on one place. However I would like to make sure I can still send using the domain2 email address which logic tells me I should just need username password and the smtp settings.
But unfortunately even that when I want to set up on gmail or even outlook is giving me the same issues as mentioned above.!I googled and I looked through the forums about IIS application pool and restarting mailenable servers I did all of that but still the same error and issues, the domains have been propagated properly I waited 72hours just incase!
I have 2 webspaces on my server, www.a.com and www.b.com
I initially setup www.a.com, everything works fine and I can access the emails for a.com through webmail.a.com
Then I setup www.b.com using almost identical DNS settings, except that each domain has its own dedicated IP
Now, the problem is I am not able access webmail.b.com, the error message is server not found, why is this?
It seems that I can only access the emails for b.com using webmail.a.com
I have mailenable version 8 standard installed...
My requirement is to redirect all hosted domain's webmail to the main hosting webmail url .. how can this be achieved ?
View 7 Replies View RelatedOne cPanel account out of the entire server is the only one affected. This one user, can not login to POP3 or Webmail for any of his email accounts.
I have checked the permissions and file owner/group on the files and folders in:
/home/USERNAME/mail/*
and
/home/USERNAME/etc/*
I have also tried restarting the POP3 service and cPanel. I have verified his passwd file has correct permissions and is in the correct format. I have tried resetting his email passwords. I have even tried too create a new email account.
Still.. No POP3 / Webmail access.
His email accounts are listed in cPanel.
I have installed ConfigServer Mail Manage (WHM Addon), and his domain will NOT show his email accounts (of course all other domains on the server are fine).
I know this is probably a configuration file or a file permission problem somewhere... I just can't find where!
Any advice?
we have a important problem with our cPanel for all of our cuestomers. The access to these services are broken. We cannot access to 3thdparty software like these: Webmail and phpmyadmin.
When we go access to our webmail service, example (Horde) take this error:
Quote:
Warning: include_once(Log.php): failed to open stream: No such file or directory in /usr/local/cpanel/base/horde/lib/Horde.php on line 3 Warning: include_once(): Failed opening 'Log.php' for inclusion (include_path='/usr/local/cpanel/base/horde/lib:.:/usr/lib/php') in /usr/local/cpanel/base/horde/lib/Horde.php on line 3
When we go access to our phpmyadmin servce take this error:
Quote:
Warning: require_once(./libraries/common.lib.php): failed to open stream: No such file or directory in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 36 Fatal error: require_once(): Failed opening required './libraries/common.lib.php' (include_path='.:/usr/lib/php') in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 36
These problem comming after the last cPanel upgrade.
Can anybody recommend a free or paid webmail application which can be used on a mobile (specifically a blackberry 8100). I need a way to access my emails via a webpage... I can't have all emails forwarded to my phone, as there are way to many. As there are a fair few emails in my inbox the application would need to be able to handle a large number of emails.
View 3 Replies View RelatedHow can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View Relatedi havw windows server 2003 with plesk installed
when i log to webmail i just see Horde ....
what i am asking for can install more than Horde
like neomail or squeirll?
I'm running Plesk and can't seem to login to my webmail with any of my users I create, anyone had this issue before?
View 14 Replies View RelatedI have a Plesk server. Plesk by default uses the Horde webmail software. I was wondering if there is a more powerful, better tool for webmail out there that also works with Plesk. All feedback is appreciated.
View 1 Replies View RelatedI'm planning on hosting some websites for customers. I am using Plesk 12. So far so good.
Now here's the problem. For some reason my host by default doesn't offer subdomains (unless I buy a more expensive package). Will this cause any problems? For example webmail.mydomain.com won't work because it uses a subdomain.
Will there be another way for customers to access their webmail?
Today my clients are not able to send mail via webmail. The message below is received no matter what email address is placed in the To: field.
There was an error sending your message: Message could not be delivered - the address was not found, is unknown, or is not receiving messages.
I have re-started all services. Note that they are able to send via outlook. Seems to just be webmail.
Running:
OS Microsoft Windows Server 2012
Plesk version 12.0.18 Update #30, last updated at Dec 26, 2014 03:35 AM
I noticed Plesk uses an unsecured connection for webmail: webmail.mydomain.com
Can this connection be secured or is that not possible?
(Isn't this a security risk?)
I get an error when i try to access my webmail(horde) over the i-net i get error Unable to get webmail password every time. The error appeared when i upgraded from 11.09 to 11.5. I also followed this tutorial but it didn't worked too. --> [URL] ....
View 8 Replies View RelatedWhen I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
I want to secure the webmail access (webmail.mydomain.com) with an SSL certificate. In this case, a self signed certificate should be enough because the users using the webmail will trust it.
Latest Plesk 12 and Windows Server 2012 R2, MailEnable WebMail as shipped with Plesk. Horde Webmail.
How would I set this up? I found no setting to enable SSL for the webmail subdomain. And I can not add it as subdomain and assign the self-signed certificate on it (Plesk panel does not allow webmail.mydomain.com as subdomain as it is already in use).
I found these links but they did not really answer my question as the information is mostly outdated (Windows 200):
[URL]
I have a server in my house. My IP local is 192.168.1.61 and i have other ip static public. I can view my domain and one subdomain, but i don't view other subdomain and webmail.
View 1 Replies View RelatedI'm not able to login in webmails with shot names, in Horde, nor in RoundCube.
Ex: webmail.domain.tld
username: user1
I must use the full email address as username
Ex: webmail.domain.tld
username: user1@domain.tld
It seens it not find the server.
In Plesk Panel it works fine.
My config :
CPUAuthenticAMD, AMD Opteron(tm) Processor 4334
VersionParallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OSCentOS 6.5 (Final)
I install and use a site with wordpress in multisite mode using subdomain > its ok to make it work,
I create vhost.conf in /var/www/vhosts/system/mydomain.com/conf/vhost.conf
And add A key *.mydomain.com in DNS
I try to go to webmail.mydomain.com and it always redirect to my domain.com, I create a subdomain manually and subdomain don't work WHY ?
Question : What must I do to allow manual subdomain and webmail under Plesk v12.0.18_build1200140606.15
I installed PLESK12 (or better: I installed the distributed Debian-Image from my hoster) onto my server. Everything works fine as always - except webmail. I did the following:
- in the general webmail properties, I deactivated Horde. roundcube was active and still is (also tried to activate it again)
- I also activated roundcube as webmailer in the hosting itsel.
- tried to open webmail.mydomain.com --> site not found. I added a mail-adress and tried to use the icon to the webmail --> site not found.
- I restarted the server (maybe deactivation Horde did some stuff there...)... no changes.
PLESK 12 (latest update), running on Debian 7.6 ....
Webmail using, in the "Inbox" I chose all the mail and accidentally pressed the "clear folder" letters deleted or i am can be restored? I need to return the letter....
View 3 Replies View RelatedI would like to change the alias host from webmail.domain.com webmail to domain.com/webmail.
View 1 Replies View RelatedI created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.
But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com
How do I update to the new certificate for webmail?
EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.
I was following this tutorial to resolve the 500 internal error I get when I visit webmail.example.com and it says:
Ensure that the '/var/www' is not a symlink to any other directory# ls -ld /var/www lrwxrwxrwx 1 root root 14 Oct 24 11:14 www -> /mnt/data/www/.You need to remove the symlink and change the vhosts location by using the transvhosts.pl utility: when I run the above command, it gives me this: ls -ld /var/www drwxr-xr-x 9 root root 4096 Jun 18 02:58 /var/www this means I have a symbolic link ? how can I delete it ? and if I delete it will it effect anything?
I have recently migrated from one server with Plesk 11 to another server with Plesk 12 and cant get the alias emails work properly like they worked before the migration. I can send emails from any alias@alias.domain (via Outlook), but cant receive them.I can receive emails only from the mailbox email of the main domain, but not for the alias-email of that mailbox for an alias domain that worked well for Plesk 11. Where might be the problem?
I have created a webmail.domain.tld in the Webmail-Services (where it says Horde 6.2.1 is installed), but the webmail.maindomain.tld is not working. I get displayed only the "webservers default page". Webmail.maindomain.tld worked well in Plesk 11.There is also no "Webmail" link in the domain control pannel like it used to be in the Plesk 11.I have created a new abonnement with a new domain to test this, but there is no Webmail link for this abonnement as well.
You message for <alias@alias.tld> from 2014/11/17 could not be delivered. 4.0.0 smtp; 454 4.7.1 <alias@alias.tld>: Relay access denied