I get an error when i try to access my webmail(horde) over the i-net i get error Unable to get webmail password every time. The error appeared when i upgraded from 11.09 to 11.5. I also followed this tutorial but it didn't worked too. --> [URL] ....
View 8 RepliesIn Plesk (V. 12.0.18) there is no possibility to create mail accounts for subdomains via web interface. The KB article [URL] ..... describes this problem. The article suggests two possible ways.
I don´t want to use option 1 (create subdomain as additional domain) because a subdomain as domain wastes a domain in the license model.
Instead of that I tried the second way (command line interface). I can execute the first command without problems. When I try to execute the second command, I get the following error: "An error occured during mailname creation: Unable to set password: Domain of type subdomain selected".
After the upgrade of our Plesk installation from 9.5x to 11.5.30Everything works ok (sites,sites with databases, Plesk etc)but when I go to Home>Tools & Settings> Backup Manager.I see errors on every daily backup I have on schedule:
The backup Plesk_Daily_Full_Backup_1407060112.tar has completed with warnings. (View the details) Close this message
Error:mysql "myuser_drupal"
Unable to define superuser password for mysql server on localhost
Error:mysql "myuser_drupal"
Unable to get list of db servers (ErrorCode: 1, STDOUT.
Error:mysql "myuser_wp_eng"
Unable to define superuser password for mysql server on localhost
My requirement is to redirect all hosted domain's webmail to the main hosting webmail url .. how can this be achieved ?
View 7 Replies View RelatedI have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.
However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."
I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.
What must I do to enable webmail?
today i changed the password for the admin panel for a customer (username eg. mylogin). 10 minutes later he called me and said that he cannot get into his emailaccount anymore. Checked the password and saw that the emailpassword for his emailaddress (eg. mylogin@mydomain.com) is now the same from the admin panel login. So i changed the emailpassword and checked the admin panel login - it now has the emailpassword. What a mess.. I'm running Plesk Panel 11.5.30 MU47.
View 1 Replies View RelatedI'm planning on hosting some websites for customers. I am using Plesk 12. So far so good.
Now here's the problem. For some reason my host by default doesn't offer subdomains (unless I buy a more expensive package). Will this cause any problems? For example webmail.mydomain.com won't work because it uses a subdomain.
Will there be another way for customers to access their webmail?
I noticed Plesk uses an unsecured connection for webmail: webmail.mydomain.com
Can this connection be secured or is that not possible?
(Isn't this a security risk?)
When I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
I have a server in my house. My IP local is 192.168.1.61 and i have other ip static public. I can view my domain and one subdomain, but i don't view other subdomain and webmail.
View 1 Replies View RelatedMy config :
CPUAuthenticAMD, AMD Opteron(tm) Processor 4334
VersionParallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OSCentOS 6.5 (Final)
I install and use a site with wordpress in multisite mode using subdomain > its ok to make it work,
I create vhost.conf in /var/www/vhosts/system/mydomain.com/conf/vhost.conf
And add A key *.mydomain.com in DNS
I try to go to webmail.mydomain.com and it always redirect to my domain.com, I create a subdomain manually and subdomain don't work WHY ?
Question : What must I do to allow manual subdomain and webmail under Plesk v12.0.18_build1200140606.15
I installed PLESK12 (or better: I installed the distributed Debian-Image from my hoster) onto my server. Everything works fine as always - except webmail. I did the following:
- in the general webmail properties, I deactivated Horde. roundcube was active and still is (also tried to activate it again)
- I also activated roundcube as webmailer in the hosting itsel.
- tried to open webmail.mydomain.com --> site not found. I added a mail-adress and tried to use the icon to the webmail --> site not found.
- I restarted the server (maybe deactivation Horde did some stuff there...)... no changes.
PLESK 12 (latest update), running on Debian 7.6 ....
When I'm trying to open [url].tld to access IMP Webmail interface, the following error appears:
PHP Code:
Registry objects should never be cloned.
It's a Plesk server ..
Webmail using, in the "Inbox" I chose all the mail and accidentally pressed the "clear folder" letters deleted or i am can be restored? I need to return the letter....
View 3 Replies View RelatedI would like to change the alias host from webmail.domain.com webmail to domain.com/webmail.
View 1 Replies View RelatedI created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.
But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com
How do I update to the new certificate for webmail?
EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.
I was following this tutorial to resolve the 500 internal error I get when I visit webmail.example.com and it says:
Ensure that the '/var/www' is not a symlink to any other directory# ls -ld /var/www lrwxrwxrwx 1 root root 14 Oct 24 11:14 www -> /mnt/data/www/.You need to remove the symlink and change the vhosts location by using the transvhosts.pl utility: ​when I run the above command, it gives me this: ls -ld /var/www drwxr-xr-x 9 root root 4096 Jun 18 02:58 /var/www ​this means I have a symbolic link ? how can I delete it ? and if I delete it will it effect anything?
I have recently migrated from one server with Plesk 11 to another server with Plesk 12 and cant get the alias emails work properly like they worked before the migration. I can send emails from any alias@alias.domain (via Outlook), but cant receive them.I can receive emails only from the mailbox email of the main domain, but not for the alias-email of that mailbox for an alias domain that worked well for Plesk 11. Where might be the problem?
I have created a webmail.domain.tld in the Webmail-Services (where it says Horde 6.2.1 is installed), but the webmail.maindomain.tld is not working. I get displayed only the "webservers default page". Webmail.maindomain.tld worked well in Plesk 11.There is also no "Webmail" link in the domain control pannel like it used to be in the Plesk 11.I have created a new abonnement with a new domain to test this, but there is no Webmail link for this abonnement as well.
You message for <alias@alias.tld> from 2014/11/17 could not be delivered. 4.0.0 smtp; 454 4.7.1 <alias@alias.tld>: Relay access denied
All my cPanel webmail programs (roundcube, squirrel mail and horde) are not able to send e-mails. I can send through POP3 fine, but these programs just can't send mail. I've done some googling and found that if I edit the squirrelmail config to use sendmail it should work - which it does. So really, I've got squirrel mail to work, but the problem still exists for the other two webmail programs.
I think it's some sort of a problem with SMTP, but I'm not too sure.
If you've experienced this before or know how to fix it,
How i get a new Password for a SSH Connection?
Plesk 12, CentOS 6.5
from some time, the plesk password is no more stored in chrome.I mean that even I delete all passwords/history etc chrome don't ask to save password...so something changed in the login page I suppose.from same time every time I connect to any plesk panel. Chrome say that it's not safe and I have to click "advanced" to continue, even it's a new installation make some minute before.
View 6 Replies View RelatedI am Using Plesk 12 and Centos ... I have moved my name server to my domain registrar and also moved my email.
I removed the webmail and the mail hosting and named and the result would be the Plesk Panel would also get removed automatically.
I restored the recent snapshot and I would like to disable the following services permanently or remove webmail, named and mail hosting service without affecting plesk panel.
SMTP Server (Postfix)
Courier POP3 server
Courier POP3 server with SSL/TLS support
Courier IMAP server
Courier IMAP server with SSL/TLS support
Courier IMAP authentication daemon
DNS Server (BIND)
SpamAssassin
Plesk milter (Postfix)
I did chkconfig servicename off but it doesn't work.
My VPS has low specifications.
I've upgraded from WS2008R2 & IIS to CentOS and Plesk 12.Now, I wanted to change the webmail link for all domains to mail.domain instead of webmail.domain. I've followd 2 guides to do that: URLs....Everything went smooth, but now Horde and Roundcube look like this (even when I restarted the whole server):
View 12 Replies View Relatedchange the webmail from Plesk over
/usr/local/psa/admin/conf/templates/custom/domainWebmail.php
thats working without a problem if i change the Webmail Subdomain from one to another.
But i want to change the webmail from
webmail.domain.tld
to
domain.tld/webmail
The following change in domainWebmail.php does not work:
ServerAlias "<?php echo $VAR->domain->asciiName ?>/webmail"
<?php foreach ($VAR->domain->mailAliases AS $alias): ?>
ServerAlias "<?php echo $alias->asciiName ?>/webmail"
<?php endforeach; ?>
I have used plesk 11.5 and never had problem before. I installed Plesk 12 and Migrated sites + created new email to test as well. When I go to webmail webmail.domain.com
I get the login screen from round cube which i want.
Then I enter login + password and I get 500 Internal Server Error.
Apache Server at webmail.domaincom Port 80
It worked fine on 11.5
Linux CentOS 6.6Â
I updated two days ago the Plesk panel from the Panel itself and it was succesfully but at webmail URL which it appeared one error about default.inc something but after I did refresh some times it disappeared now it doesn't show anything. I tried removing and reinstalling roundcube but still doesn't work..
Here are my logs from /var/log/plesk-roundcube/errors
[09-Apr-2015 14:50:36 UTC] PHP Warning: finfo_file(/usr/share/psa-roundcube/installer/images/roundcube_logo.png): failed to open stream: No such file or directory in /usr/share/psa-roundcube/program/lib/Roundcube/rcube_mime.php on line$n line 754
I have a Plesk 12 server running under Debian 7. I have a website with only mail so I disable web hosting. The problem is that the client needs to use webmail but webmail does not work (maybe because web hosting is disabled)...
View 1 Replies View Relatedinstalled on CentOS 6 and Plesk Version 12.0.18.
I initially had trouble where everytime i tried to load webmail.domain.tld i would have a DNS error, I've resolved this by correcting the DNS settings on my domain and now i can login to the webmail and recieve emails. Now, whether i use Horde or Roundcube i get this authentication error for my SMTP. I'm very new to this stuff and i'm not sure where my log files are or what the issue could be or even how to fix it.
I have a problem with webmail (horde). Horde Webmail show the wrong time, 2 hours to late. It look like that horde show the UTC time, but not the CEST "Europe/Berlin" of my server. I can change that over "preferences" -> "global preferences" -> "locale and time" and change "Your current time zone" from "Default" to "Europe/Berlin". This will now show the correct time (timezone), but this is not the solution because this will do all webmail users.
How can i change the default timezone in Horde?
Output from shell
#my timezone and this will show in all things but not in webmail horde
[root@www /]# date
Fr 11. Jul 17:32:14 CEST 2014
#this time look like the default time in horde
[root@www /]# date -u
Fr 11. Jul 15:33:31 UTC 2014
I have a problem with my vps Centos + Plesk 11.5, from webmail login not work, I seen this guide:
[URL] ....
but not resolved problem...