Can anybody recommend a free or paid webmail application which can be used on a mobile (specifically a blackberry 8100). I need a way to access my emails via a webpage... I can't have all emails forwarded to my phone, as there are way to many. As there are a fair few emails in my inbox the application would need to be able to handle a large number of emails.
View 3 RepliesI have SSL enabled site on IIS.I want to access it from my PocketPC(Win mobile).But when I try access it, I have been prompted to install a certificate.
Unlike when I try to any HTTPS site (Banking sites) I have never been prompted to install any certificate.
Why am I being prompted with security message with "Yes,No,View certificate" options on it every time I try to access my own server(desktop) via my WIN mobile using active sync.
Unlike When I try to access banking site(https) I was never ever prompted a mesage like above.
How to have same functionality for my application also?
i have read somewhere you can logon to your server via ssh on your mobile phone. Anyone know what software is needed and how to do this? I'm off on holiday at some point and i could do with an emergency backup plan! I use a Sony ericcson p900 (oldschool i know!)
My 2nd question is:
What enables/disdabled php to access files outside of root? On my current vps, i can't include files like using ../ or full paths to files/folders outside of the public web folder.
I am interested if anybody knows who provides mobile satellite internet access?I would like to access the internet from anywhere in the world?. What are the costs? Do they have different speed plans?
View 1 Replies View RelatedWe have a customer requirement to enable Direct Push email on our Outlook Web Access servers to a number of mobile devices the customer will be supplied from Vodafone - running Windows Mobile 5
Therefore we need to create a public HTTPS address to allow access to the OWA/OMA part.
We do NOT (at this stage) want to allow general access to OWA over HTTPS (we have an eGap solution with RSA for this) so we need to be able to lock down access to the OWA server only to specific devices. One way would be to use Firewall Rules at the Outer DMZ and lock down by the IP ranges of the phone but thats prohibitive to other devices and will fail when the phones change IP (i.e. international roaming)
Therefore Im wondering if we can use self signed SSL certs where there is no trusted CA provider (if there was all browsers would simply be prompted to trust the source and then get access). If we use our own self signed certs and have them installed on the client devices would this work? What would be the downsides (i.e. less cryptogrpahy without the CA part?)
Has anyone tried any online backup services which gives mobile access also. I have been thinking about trying one. But I'm not sure if any are better than others. My main concern is security.
View 0 Replies View RelatedHow can i access webmail in plesk ? If i access webmail.domain.com, it says page cannot be loaded. Also, same for domain.com/webmail
Then I logged in to plesk >> Domain >> Mail >> Preference and tried to enable webmail.
It says "Component not installed"
One cPanel account out of the entire server is the only one affected. This one user, can not login to POP3 or Webmail for any of his email accounts.
I have checked the permissions and file owner/group on the files and folders in:
/home/USERNAME/mail/*
and
/home/USERNAME/etc/*
I have also tried restarting the POP3 service and cPanel. I have verified his passwd file has correct permissions and is in the correct format. I have tried resetting his email passwords. I have even tried too create a new email account.
Still.. No POP3 / Webmail access.
His email accounts are listed in cPanel.
I have installed ConfigServer Mail Manage (WHM Addon), and his domain will NOT show his email accounts (of course all other domains on the server are fine).
I know this is probably a configuration file or a file permission problem somewhere... I just can't find where!
Any advice?
my clients are asking for ssh access, if I gave them ssh access, can they hurt server / other clients in any possible way?
View 14 Replies View RelatedHow I do put a website of a client that is in production and give them access it to view it while preventing search engines from indexing it? I had the production site on a sub domain but search engines would inevitably index it. I could a no-index robot text but if people had the domain, they'd still find it. I want to just put it on my server and the client can login with a PW and view the status.
View 3 Replies View Relatedwe have a important problem with our cPanel for all of our cuestomers. The access to these services are broken. We cannot access to 3thdparty software like these: Webmail and phpmyadmin.
When we go access to our webmail service, example (Horde) take this error:
Quote:
Warning: include_once(Log.php): failed to open stream: No such file or directory in /usr/local/cpanel/base/horde/lib/Horde.php on line 3 Warning: include_once(): Failed opening 'Log.php' for inclusion (include_path='/usr/local/cpanel/base/horde/lib:.:/usr/lib/php') in /usr/local/cpanel/base/horde/lib/Horde.php on line 3
When we go access to our phpmyadmin servce take this error:
Quote:
Warning: require_once(./libraries/common.lib.php): failed to open stream: No such file or directory in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 36 Fatal error: require_once(): Failed opening required './libraries/common.lib.php' (include_path='.:/usr/lib/php') in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 36
These problem comming after the last cPanel upgrade.
I have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.
However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."
I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.
What must I do to enable webmail?
i recently purchased a VPS Server from OVH, So far all is good with it, I have 4 domains parked off in a local South African Server that using DNS Records are pointing to the VPS Servers. The website etc is all displayed 100% so no issues there.My problem comes with email, Generally I use GMAIL to access all my emails using their POP3 and SMTP Feature by just putting in the details like how outlook is. Unfortunately it keeps on saying connection timed out and at times says another error to do with denying access.
So then I try accessing my email using the webmail interface, Im using mailenable and mailenable webmail, I cannot access the webmail through the panel neither can I access it using the link webmail.domain.com or webmail.domain.com/mewebmail/ as it gives the following error:
Service Unavailable: HTTP Error 503. The service is unavailable.
My setup for my emails is as follows: I have 4 domains (for example sake lets call it domain1, domain2, domain3, domain 4) now domain2,3 and 4 3 individual email addresses with no mailboxes as I set it up on plesk so that all email from there gets forwarded to main Domain calling it domain1. like info@domain1.com.In this way I do not have to open so many and all email found on one place. However I would like to make sure I can still send using the domain2 email address which logic tells me I should just need username password and the smtp settings.
But unfortunately even that when I want to set up on gmail or even outlook is giving me the same issues as mentioned above.!I googled and I looked through the forums about IIS application pool and restarting mailenable servers I did all of that but still the same error and issues, the domains have been propagated properly I waited 72hours just incase!
I have 2 webspaces on my server, www.a.com and www.b.com
I initially setup www.a.com, everything works fine and I can access the emails for a.com through webmail.a.com
Then I setup www.b.com using almost identical DNS settings, except that each domain has its own dedicated IP
Now, the problem is I am not able access webmail.b.com, the error message is server not found, why is this?
It seems that I can only access the emails for b.com using webmail.a.com
I have mailenable version 8 standard installed...
I migrate to 12.0.18 Actualización #28, última actualización Dic 11, 2014 02:12 PM.
When I try to Access to the domains in a specific client I´m geting this error:
Internal error: D:Plesk wes.escarmerieradomenech.com is out of webspace
MessageD:Plesk wes.escarmerieradomenech.com is out of webspace
File Webspace.php
Line401
TypePleskFatalException
I migrate from plesk 9.5 to another server with plesk 12.0.18, and then outlook and mail default from iphone don't work, but tunderbird and webmail work well.
In outlook when i put the same configuration than tunderbird and i try to send mail out from my domain said this error:
Error del servidor: '554 5.7.1 <244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]>: Client host rejected: Access denied
I don't know if outlook is bad configuration but with plesk 9.5 worked well, and now nothing.
I can recive mail but not send.
I host a number of large sites (20GB+) on my VPS server running Centos6 and Plesk Panel 12. Due to the large sites I don't want to keep multiple backups on the actual server because it would take too much disk space. When I create a backup to the server's repository all is good, but when I click the green arrow to download the backup it takes a long time and then it fails with a timeout error. On some smaller sites it takes a while but eventually downloads the tar.
So my question: Is it possible to access the Server Repository via FTP? How and where would I set this up? Presumably it would be a better way to download these large archive files?
When trying to delete A client I get the following error:
Internal error: Access is denied.
Message Access is denied.
File Hierarchical.php
Line 105
Type Exception
I'm on plesk 12.0.18 Update #53 and have run the plesk reconfigurator to check for permissions issues.
I installed the SiteProBuilder (from the www.site.pro page) in extensions of the Parallels Plesk Panel 11.5.30. I installed from .zip file on administrator account of Plesk Panel. The extension SiteBuilder was shown in all administrated subscriptions. On administrator account the extension works properly but when I log into the Plesk Panel as a client of one subscription then extension doesn't start and message is displayed: "Error: access denied".
View 3 Replies View RelatedI would like to know which of this, or any other that you know of are light on vps server resources (light footprint).
Web Server:
- LightTPD, [url]
- sHTTPd, [url]
Email:
- maybe some kind of light deamon version.
SQL:
- SQLite
- maybe some kind of light deamon version.
PHP:
- maybe some kind of light deamon version.
I have a 3ware 9650SE-24M8 RAID Controller. It was working fine for a few days and today while I was changing the RAID configs and installing different OSs, it just stopped working. Now when I boot my machine up it does not even detect any hard drives or RAID controller. I looked inside the box and the LED light on the RAID controller that is usually solid green is now blinking red. I googled for solutions but all searches lead me to useless information such as blinking red lights on the server case.
View 12 Replies View RelatedI have been building a business around blogs and other social media items on mostly OSS technology - but unfortunately, my current reseller account is inadequate for what I need (especially with sites that query a DB) and unable unfortunately to upgrade to what I might need. I don't want to rip on them because they've provided me great service, but they're just not able to ramp up. My thought is there won't be any reseller to meet my needs after learning more info, so I'm going to make the leap up.
I'm not going to go pound the pavement for hosting business; this is only really for my clients I serve as a agency/consultant/designer and my clients need and deserve more.
I have been considering Mosso; but also weighing a dedicated box as it's around the same price and looking around here for the solutions people recommend for the past few hours. But since I sort of have a specialty application, I thought I'd ask for your recommendations.
I want to say that I came here from another forum because my provider was affected by the Planet outage and the conversation and knowledge was great; you are a very smart community. I hadn't heard of this place beforehand but am glad I found it.
We are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1
but these values are not available in the dropdownlist. attached are the screenshots.
My requirement is to redirect all hosted domain's webmail to the main hosting webmail url .. how can this be achieved ?
View 7 Replies View Related