I wrote my own script. Once in a while, under a certain condition, my script run for more than 30 seconds.
On that moment, the whole server go down.
I know about the problem only after checking the error_log
Since I'll be moving to reseller hosting I wonder if there is a way to get email every time there is such error.
This is a rare issue i have on a RHEL 5.2 + cPanel server.
Server time is:
Tue Nov 11 17:02:51 CST 2008
Squirrelmail time show:
Code:
Last Refresh:
Tue, 5:02 pm
So, that is correct too..
But email arrives with -4 hours time, example:
webmaster@xxx.com 1:03 pm testing email
I already rebooted httpd, exim, and imap server, and the server itself too.. and problem stills.
My server is down for about 4 hours. I have already submit a ticket to GipNetworks Support but no answer. It's rare that GipNetworks give me no support or explanation above 2 hours.
View 1 Replies View RelatedI found that adbrite are using 10 name servers .
asia3.akam.net
aus1.akam.net
eur1.akam.net
eur2.akam.net
ns1-105.akam.net
ns1-232.akam.net
ns2.adbrite.com
ns4.adbrite.com
usc2.akam.net
usw6.akam.net
could any one has for example 3 hosting accounts each one in
a ddifferent hosting company , could it be possible to put all Name Servers
of 3 different hosting sites under one domain name ?
How are the records on slave DNS servers updated ? Does it use the settings in the SOA section of the zone files to determine how often slaves are updated ?
Code:
18 ; serial
14400 ; refresh (4 hours)
7200 ; retry (2 hours)
2419200 ; expire (4 weeks)
3600 ; minimum (1 hour)
Is there any way for master to push out notifications to slaves OR get slaves to update their DNS sooner.
The main reason for this is it seems adding an entry on the master (via the GUI) is taking ages to appear on the slave.
i am getting bounce back email with retry time out error
Error message :
Quote:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
accounts@mantratec.com
retry time not reached for any host after a long failure period
then i checked exim log & got result as below
Quote:
2009-05-13 03:11:45 1M2l9s-0006LA-L5 == accounts@mantratec.com R=dk_lookuphost T=dk_remote_smtp defer (-53): retry time not reached for any host ...
On a rhel 5.3 + cpanel server, i have a time problem.
Web apps, as joomla show articles with a -2 hours time difference, or even webmail clients like roundcube are showing a wrong time when an email arrives. It seems this apps are not picking up the server time.
Both things (joomla and webmail) should use the configured server time.
I know Joomla can be fixed using the time zone option, and webmail too.. but in a server with over 300 websites, there are many joomlas installations and even more mailboxes...
/etc/sysconfig/clock have the right time zone.
As the title says, 1 of the accounts on my server is getting the following error message - error number 0x800CCC79 server response 451 temporary local problem -
Yet other accounts on the server are sending and recieving fine?
what would cause this error? Its not tempory as its been 48 hours
while i am restoring db (110MB) via SSH following error occur
Code:
ERROR 1064 (42000) at line 145689: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '
Fatal error: Maximum execution time of 30 seconds exceeded in ' at line 1
I got report from webceo that I have some issues. May someone help me fix this?
DNS Lookup: 0.22 sec
Connect time: 0.33 sec
Host ping: 0.10 sec
That mean too slow with the other sites!
I can't get access to a certain site. I always get the page with:
network time out - server at *** takes to long to respons. More people have noticed this and apparently it only happens to people with certain specific providers. And not all the time. Some times they DO get access eventy to they belong to the same ISP. So I guess an ISP isn't blocking access to it otherwise it would be permenantly/The site administrator insists that certain ISP's are blocking his site. He's hosting it on his own server. The domain belongs is registered at namecheap.com.
If an ISP is blocking this site (if that's possible?), that would lead to that 'network timeout' page wouldn't it?
What is the most likely reason for getting a timeout page anyway?
2008-03-03 12:45:31 [6069] 1JWFfG-0001Zt-2z <= nursesfn@classiceurocars.com H=(dom.voliacable.com) [77.123.215.163]:1280 I=[xxx.xxx.xx.xx]:25 P=esmtp S=3053 id=01c87e38$b16c6b00$a3d77b4d@nursesfn T="The more dedicated you are, the sooner you will see results. We look forward to your success!" from <nursesfn@classiceurocars.com> for localuser@localdomain.com ....
View 2 Replies View RelatedI have a dedicated server specs: AMD 3500+ 64 Bit CPU, 1 GB Ram, 160 GB Sata Drive. For 1 month, CPU load average reaches 40-50 value. This happens about 5-6 times in a day. When I stop httpd service for 30 seconds everything goes normal. I think this is not a DoS attack because it comes systematic, I dont believe no one makes this regularly except bots.
Maybe its a system service or a cronjob but it stops when I turn off httpd service?
How can I be sure about what's making this regularly load?
I also did set up a script which mail me when load average of system goes crazy and restart httpd service. But instant restart is not working to stop load increase.
The server is going down from time to time, every 12 days or so the site hosted there is no longer accesible, everything starts with the site slowing don and down and then is not longer reachable, what we do is to request a power cycle, and with this we start all over again till next power cycle, so on so on, of course, here are my server details and more info on this:
- MySQL - 5.1.41-3ubuntu12.10
- Apache - 2.2.14-5ubuntu8.4
- PHP - 5.3.2-1ubuntu4.9
- operating system: Ubuntu Server 10.04 LTS
After some time emailing the support guys to barely check about what's going on, we received an email with a few things:
1.- found a few errors that likely would cause issues with Apache. The first error is:
[Mon Feb 04 05:03:10 2013] [error] mod_fcgid: fcgid process manager died, restarting the server and the next error is:
[Mon Feb 04 14:32:34 2013] [error] server reached MaxClients setting, consider raising the MaxClients setting ...
Both these errors seem to indicate that you have a process that is running out of control on your server. We were unable to determine what script on your site is running caused your connections to be maxed out however it does appear that before these errors were generated there was a WordPress plugin referenced in your access logs...
2.- Additionally during our review we did find that your error log for mercadodedinerousa.com is 45 GB's which is excessively large and can cause problems when Apache is trying to write a such a large file.
3.- The majority of the errors being logged are:
[Wed Feb 06 12:12:31 2013] [error] [client 200.76.90.5] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/vhosts/mercadodedinerousa.com/httpdocs/index.pl, referer: [URL]
For one of may domains I'm receiving the following error when someone tries to send mail to it. Also I never receive the mail as it seems to just sit on the server. When the permission were changed on the file, it seemed to have changed back on its on when ever a new address is added. Any solutions?
421 fopen('users/assign') failed (#5.7.10) Permission denied
Code:
-rw------- 1 root qmail 2772 Apr 22 10:38 assign
Plesk+CentOs
I am having trouble with setting up an email account to set up the email I go to Mail > Create Email Address > and enter email address (info@example.com) and check the "access to control panel" and create a password and also check "mailbox" .
But in the email client, when I go to use SMTP and I enter the following info:
- SMTP Server: example.com
- username: info@example.com
- password: password I created above
- port 25
- user TLS
I get this error: Your other email provider is responding too slowly. Please try again later, or contact the administrator of your other domain for further information.
We have a few users that use SSL email and we decided to purchase a cheap single-root SSL cert over at namecheap for the host name so that it would end the "self-signed cert" whining.
We got the cert installed and it works great for WHM/cPanel and also works for SSL over IMAP and POP3, but the very first email anyone sends (SMTP) per day gives this warning (Outlook Express):
The server you are connected to is using a security certificate that could not be verified.
A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
It seems obvious that the cert used by the SMTP system is not the new one we installed.
We used WHM's SSL/TLS -> Change Server Certificates link to install the cert.
We then made sure that:
/usr/share/ssl/certs/host.domain.com.crt
/usr/share/ssl/private/host.domain.com.key
/etc/exim.crt
/etc/exim.key
...all contained the current cert or key as appropriate.
Just for grins, we even made sure:
/usr/local/cpanel/etc/cpanel.pem
...had the correct pair.
We restarted all the mail services and even restarted the whole server. (I know...Windows reaction...bad tech.)
Does anyone know of a stealth location where the SSL cert for SMTP should be updated?
WHM 10.8.0 cPanel 10.9.0-R139
CentOS 3.8 i686 - WHM X v3.1.0
I have a client with a dedicated server running. Spec below.
The problem I am having is with incoming email. When I set up a new email account it can take about 10 attempts to log on to the incoming mail server. Once it has connected it will be ok for a short while then I will get a connection error and no emails will come through.
This is happening across all platforms, PC / MAC / iPhone and iPad.
I am a web designer with limited knowledge of the setting up of the server and was looking to set up email server within plesk.
General
CPUGenuineIntel, Intel(R)Core(TM) i5-2400 CPU @ 3.10GHz
VersionParallels Plesk Panel v11.0.9_build110120608.16 os_Ubuntu 12.04
OSUbuntu 12.04.4 LTS
Key numberPLSK.02873817.0002
System Uptime: 60 day(s) 10:03
Hostname
IP address
OSUbuntu 12.04.4 LTS
Panel version11.0.9 Update #62
I have a VPS with plesk 12 I created an email account with one of my domains and when I try to send emails from this account through webmal of roundcube, I get the following error.: An error has occurred! SMTP Error (250): Authentication failed.
View 6 Replies View Relatedwhen I create new email address get this error:
Error: Source: Microsoft OLE DB Provider for SQL Server
Description: 'encrypt' is not a recognized built-in function name.
we regularly get this message in boxmail of adress used to send email from server.This is the mail system at host DOMAIN.fr. You can delete your own text from the attached returned message.The mail system
<1@SERVERNAME.HOSTER.com> (expanded from <1>): User unknown in virtual
alias table
If i look in maillog i see that :
May 18 16:48:52 SERVERNAME postfix/error[22737]: F22521B4E45: to=<1@SERVERNAME.HOSTER.com>, orig_to=<1>, relay=none, delay=0.07, delays=0.04/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table)
Just after that we can see email go normally :
May 18 16:48:59 SERVERNAME postfix/smtp[22736]: F22521B4E45: to=<EMAIL@DOMAIN.com>, relay=mx3.mail.icloud.com[17.158.8.50]:25, delay=7.3, delays=0.04/0.03/2.4/4.8, dsn=2.5.0, status=sent (250 2.5.0 Ok.)
The problem is in error message (at top) the message attached is the one sent to EMAIL@DOMAIN.com. So we can think the message is not sent to EMAIL@DOMAIN.com. SERVERNAME, HOSTER and EMAIL@DOMAIN are here to mask real data.
OS: Debian 7.7
Plesk version: 12.0.18 Update #46
Since 12.0.18, when I go to Tools & Settings > Mail Server, I get this error message on the page:
"Error: The limits on outgoing mail will not work for the subscriptions that have IP addresses from the white list. To make the limits work, remove IP addresses from the mail server's white list".
However, the whitelist page just contains 127.0.0.0/8 and ::1/128, and all my subscriptions have an external IP address which is clearly not in the whitelist.
I have just install on a new server plesk 12.0.18 Update #7 on centos 6.5 final.Added new hosting for the domain on a dedicated IP. All works fine (website, incoming mails etc) apart from outgoing mails.Both webmail (roundcube) and other mail software (outlook 2010, 2013 , android phone etc) outgoing mail i can't get to work.
I have attached screen from webmail with SMTP error (250) : Authentication failed..With Outlook it will allow me to set up account, test account setting... it say all all complete if i don't set secure connection (SSL)/requires authentication. But when you try sending mails you get the error: Your message did not reach some or all of the intended recipients.
Subject:test
Sent:16/07/2014 15:13
The following recipient(s) cannot be reached:
'x@xxx.com' on 16/07/2014 15:13
Server error: '554 5.7.1 <x@xxx.com>: Relay access denied'
When you set the outgoing requires authentication/ advance SSL you get:Send test e-mail message: None of the authentication methods supported by this client are supported by your server.I have tried changing to some outgoing ports to no avail.
When I change an email address on a user's account I get this error?
Code:
Internal error: mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/mydomain.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
Message mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/bullochrec.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
File Agent.php
Line 243
Type PleskUtilException
Using Cloudlinux 6.6 and Plesk 12
I get the following error :
Fehler: Unable to create notification: Unable to create Note object: Note: unable to select: no such row in the table
and
Fehler: Benachrichtigung kann nicht aktualisiert werden: Unable to create Note object: Note: unable to select: no such row in the table
In tools&settings -> Email Notifications
I run plesk 12.00.18#7 and i have upgrade from 11.5.30 ....
I have a user that has most of the emails sent to him bouncing back. The bounced email error is that his inbox is full.
I know it is not full, I looked at it myself, and his quota is set to unlimited.
Any idea what could be the cause? Where should I start to figure this one out?
