Mail Bouncing With Retry Time Out Error
May 15, 2009
i am getting bounce back email with retry time out error
Error message :
Quote:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
accounts@mantratec.com
retry time not reached for any host after a long failure period
then i checked exim log & got result as below
Quote:
2009-05-13 03:11:45 1M2l9s-0006LA-L5 == accounts@mantratec.com R=dk_lookuphost T=dk_remote_smtp defer (-53): retry time not reached for any host ...
View 6 Replies
ADVERTISEMENT
May 17, 2007
I've seen a lot of these messages in my exim main log:
R=localuser T=local_delivery defer (-52): Retry time n$
I do not know why. I can however still send/receive mail but I want to make sure there is no valid mails being filtered out or such.
I've done:
/scripts/mailperm
/scripts/eximup --force
My domains are in:
/etc/localdomains
/etc/remotedomains does not exist
WHM > EXIM config I only have this checked on:
Verify the existence of email senders.
EXIM config file:
Code:
untrusted_set_sender = *
local_from_check = false
#local_sender_retain = true
timeout_frozen_after = 2d
ignore_bounce_errors_after = 12h
domainlist rbl_blacklist = lsearch;/etc/rblblacklist
domainlist rbl_bypass = lsearch;/etc/rblbypass
hostlist rbl_whitelist = lsearch;/etc/relayhosts : partial-lsearch;/etc/rblwhitelist
message_size_limit = 20M
#log_selector = +arguments +subject
log_selector = +all
#!!# ACL that is used after the RCPT command
check_recipient:
# Exim 3 had no checking on -bs messages, so for compatibility
# we accept if the source is local SMTP (i.e. not over TCP/IP).
# We do this by testing for an empty sending host field.
accept hosts = :
# Accept bounces to lists even if callbacks or other checks would fail
warn message = X-WhitelistedRCPT-nohdrfromcallback: Yes
condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}}
{yes}{no}}
accept condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}}
{yes}{no}}
# Accept bounces to lists even if callbacks or other checks would fail
warn message = X-WhitelistedRCPT-nohdrfromcallback: Yes
condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}}
{yes}{no}}
accept condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}}
{yes}{no}}
#if it gets here it isn't mailman
#sender verifications are required for all messages that are not sent to lists
accept domains = +local_domains
endpass
#recipient verifications are required for all messages that are not sent to the local machine
#this was done at multiple users requests
message = "The recipient cannot be verified. Please check all recipients of this message to verify they are valid."
verify = recipient
accept domains = +relay_domains
warn message = ${perl{popbeforesmtpwarn}{$sender_host_name}}
hosts = +relay_hosts
accept hosts = +relay_hosts
warn message = ${perl{popbeforesmtpwarn}{$sender_host_address}}
condition = ${perl{checkrelayhost}{$sender_host_address}}
accept condition = ${perl{checkrelayhost}{$sender_host_address}}
accept hosts = +auth_relay_hosts
endpass
message = $sender_fullhost is currently not permitted to
relay through this server. Perhaps you
have not logged into the pop/imap server in the
last 30 minutes or do not have SMTP Authentication turned on in your email client.
authenticated = *
deny message = $sender_fullhost is currently not permitted to
relay through this server. Perhaps you
have not logged into the pop/imap server in the
last 30 minutes or do not have SMTP Authentication turned on in your email client.
#!!# ACL that is used after the DATA command
check_message:
# Enabling this will make the server non-rfc compliant
# require verify = header_sender
accept
nobody@lsearch;/etc/localdomains "${if !eq {$header_From:}{}{$header_sender:$header_From:}fai l}" Fs
That's just a copy/paste from whm exim fields.
dnsreport shows no errors for my domains either
What could be the cause of this error? Is it local or remote (out of my control)?
View 0 Replies
View Related
May 5, 2009
Getting an error specifically to sympatico ISP in Canada.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
retry timeout exceeded
exim_mainlog shows:
T=remote_smtp defer (-53): retry time not reached for any host
telnet sympatico.ca 25
Trying 206.47.72.104...
telnet: connect to address 206.47.72.104: Connection refused
telnet: Unable to connect to remote host: Connection refused
Port 25 adn 53 are open in my CSF firewall (cpanel server), TCP and UDP (for 53) and TCP for 25.
View 14 Replies
View Related
Jun 3, 2008
Exim on my dedicated have been a very strage comportment. If I try send email for some domains I receive errors as:
========================
root@server01 [/var/spool/exim/db]# mail -v xx@terra.com.br
Subject: lol10
.
Cc:
Null message body; hope that's ok
LOG: MAIN
<= root@server01.xxxx.com U=root P=local S=377
root@server01 [/var/spool/exim/db]# delivering 1K3Ptz-000110-L8
Connecting to mx.terra.com [200.154.55.2]:25 ... connected
SMTP<< 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
SMTP>> QUIT
LOG: MAIN
SMTP error from remote mail server after initial connection: host mx.terra.com.br [200.154.55.2]: 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
LOG: MAIN
== xx@terra.com R=lookuphost T=remote_smtp defer (0): SMTP error from remote mail server after initial connection: host mx.terra.com.br [200.154.55.2]: 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
========================
But My server have RDNS and PTR configured correct.
So If I try again I receive other kind of error as:
========================
root@server01 [/var/spool/exim/db]# mail -v xx@terra.com.br
Subject: ggg
.
Cc:
Null message body; hope that's ok
LOG: MAIN
<= root@server01.xx.com U=root P=local S=375
root@server01 [/var/spool/exim/db]# delivering 1K3Pyt-00014j-3C
LOG: retry_defer MAIN
== xx@terra.com.br R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
=============================
But If I delete file /var/spool/exim/db/retry and /var/spool/exim/db/retry.lockfile before sending i can send message without any problem. So If I try again some minutes later the problem come back.
View 5 Replies
View Related
Oct 8, 2009
I am facing a problem with my mails. I have hosted a new domain on my server and that domain is getting a lot of bounce messages with the following error message:
Message is waiting at <Mail server name> for delivery to <recipients SMTP>.
Message delivery has been delayed to the following recipients:
Recipient: [SMTP:<recepients email id>]
Reason: Remote SMTP Server Returned: 450 <Senders email id>: Sender address rejected: Domain not found
Also when I try to check the DNS settings of that domain from network-tools.com I get the error message as:
Retrieving DNS records for <domain name>...
DNS servers
nameserver1 [xxx.xxx.xxx.xxx]
nameserver2 [xxx.xxx.xxx.xxx]
Query for DNS records for <Domian name> failed: Timed out
The hosting server is configured on the following softwares:
Plesk 8.4 control panel
Bind DNS
Mail Enable Mail server
View 14 Replies
View Related
Jul 16, 2007
I wrote my own script. Once in a while, under a certain condition, my script run for more than 30 seconds.
On that moment, the whole server go down.
I know about the problem only after checking the error_log
Since I'll be moving to reseller hosting I wonder if there is a way to get email every time there is such error.
View 6 Replies
View Related
Feb 5, 2007
while i am restoring db (110MB) via SSH following error occur
Code:
ERROR 1064 (42000) at line 145689: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '
Fatal error: Maximum execution time of 30 seconds exceeded in ' at line 1
View 12 Replies
View Related
Feb 14, 2007
For some reason, one of the servers can't connect to my mail server. Whenever a user tries to send email from that server to my server, the message won't go through and I see the following in the logs (var/log/exim/mainlog):
2007-02-13 23:56:06 SMTP connection from (***.ca) [***.***.***.***] lost while reading message data (header)
this problem occurs only with this ***.ca mail server (as far as I know).
In fact, trying dnsreport.com tool on any of my server domains, I am getting the error message
"ERROR: I could not complete a connection to any of your mailservers!
******.com: Timed out [Last data sent: RCPT TO: ]
If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail *may* work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
View 14 Replies
View Related
Feb 25, 2009
The issue is that a lot of my emails seem to be bouncing back at the moment with the subject 'Subject: Warning: could not send message for past 1 day'
Could anyone explain why this might be the case? I've had a look online and the only thing I can think it might be is that my email address has been gray listed. To solve this it was recommended to use a SPF Record.
I did not really want to start messing around with my DNS before I could get some confirmation that this is the case. Though if there is another explaination please can you let m know.
The emails that I have sent have all had pdf's attached to them.
View 9 Replies
View Related
Jun 13, 2007
I'm on CentOS 4.4, webmin, LAMP, OpenSSH and ProFTPD server.
But what I'm wondering is how to look at my off network backup space.
I can only access my backup space through the DC network/my own server. So I need some kind of way to bounce a GUI ftp connection off the server - which would allow me to look at the files...
I know I can use rsync for backing up and restoring. But the way I understand rsync I need to know exactly what I am to move, as it operates on an exact command.
View 2 Replies
View Related
Dec 29, 2007
I've been receiving many bounced mail looking like this:
------------------------------------------------------
-----Original Message-----
From: Mail Delivery System [mailto:Mailer-Daemon@swh1.sellwebhost.com]
Sent: December 29, 2007 6:05 AM
To: nobody@swh1.sellwebhost.com
Subject: Mail delivery failed: returning message to sender
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
alakeneex@mail.ru
SMTP error from remote mail server after RCPT TO:<alakeneex@mail.ru>:
host mxs.mail.ru [194.67.23.20]: 550 Access from ip address 72.55.156.210 blocked. Visit http://win.mail.ru/cgi-bin/support_bl?ip=72.55.156.210
------ This is a copy of the message, including all the headers. ------
Return-path: <nobody@swh1.sellwebhost.com>
Received: from nobody by swh1.sellwebhost.com with local (Exim 4.68)
(envelope-from <nobody@swh1.sellwebhost.com>)
id 1J8ZV7-0001oN-QQ
for alakeneex@mail.ru; Sat, 29 Dec 2007 06:05:09 -0500
To: alakeneex@mail.ru
Subject: Welcome to hidden.com Forums
Reply-to: jim@hidden.com
From: jim@hidden.com
Message-ID: <4448804740c38716c8c65ef3203108b3@hidden.com>
MIME-Version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 8bit
Date: Sat, 29 Dec 2007 06:05:09 -0500
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: PHP
X-MimeOLE: Produced By phpBB2
Welcome to hidden.com Forums
Please keep this email for your records. Your account information is as
follows:
----------------------------
Username: enunkkawncuri
Password: jOFwawk954
----------------------------
Please do not forget your password as it has been encrypted in our database and we cannot retrieve it for you. However, should you forget your password you can request a new one which will be activated in the same way as this account.
Thank you for registering.
--
Thanks,
hidden.com
-----------------------------------------------------------
This is only one exemple from one forum but many of our users use forums as well and we receive dozens of similar mails.. Is there a way to stop this or to make the mail rebound to the user instead to nobody?
View 3 Replies
View Related
Aug 6, 2007
I have one of our servers that is bouncing all sent emails to hotmail, MSN and some others. The emails often come back saying they are bounced as SPAM.
There were SPAM issues on this particular server at one point, but have since been corrected one we tightened it up.
Now, how can I fix this? Can I change the servers hostname? Are they rejecting by hostname, or by IP?
And do I need to just contact each provider and try to get off their blacklist?
View 5 Replies
View Related
Oct 5, 2013
I run a website that uses a GoDaddy Virtual Private Server & Plesk. The website sends emails to alert users of various events. For the most part, this works but I occasionally capture the following error message:
Error in processing. The server response was: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later.
Can the number of messages sent over X number of minutes be set via Plesk? If so, how?
View 3 Replies
View Related
Dec 1, 2014
My hosting provider recently (and without any warning) decided to block outgoing connections to port 25. What this means is for any client/domain/email address that has a forwarder setup, the mail will never reach its destination because the connection to the other server always times out. The error logs look like this:
postfix/smtp[8414]: connect to ASPMX2.GOOGLEMAIL.COM[74.125.131.26]:25: Connection timed out
postfix/smtp[8421]: connect to aspmx2.googlemail.com[74.125.131.26]:25: Connection timed out
postfix/smtp[8425]: connect to aspmx3.googlemail.com[64.233.186.26]:25: Connection timed out
postfix/smtp[8423]: connect to aspmx4.googlemail.com[64.233.166.26]:25: Connection timed out
I haven't been able to find a way to force relay to 465. Or maybe I shouldn't have relay on at all and do this another way?
View 1 Replies
View Related
Jun 20, 2009
I own my domain [url] and have a reseller plan on a shared host [url]I have the DNS on godaddy pointed to the nameservers of reyox and on the Cpanel of my domain at reyox I have a forwarding account [url]set to forward to my gmail account.
To the best of my knowledge this has worked flawlessly for years but recently I have been starting to not receive emails from people. I found out when I wasn't getting replies I had been expecting and when I inquired or called the people instead they told me that hey replied... it's been happening over and over again lately.
When I asked my host last week they replied: "We did clear up some mail issues last night, some issues with the queue processing."
However after that it kept happening and now I am at a loss.
I don't know what's wrong nor how to troubleshoot it... It happened with people that are on all sorts of domains (gmail, aol, personal domains etc) and it happens sporadically...
It's really frustrating because I don't know what else I am not getting considering that every other day I find out about an expected email I didn't get.
The werid thing is that none of the senders whose emails got lost reported that they received a bounce issue...
how I can address this in terms of troubleshooting it and finding a solution?
Is there some sort of email monitoring services like there are site uptime monitoring services?
View 2 Replies
View Related
Jul 4, 2014
I have Plesk 11.5.30 Update #47, Centos OS 6.5 x64, MTA Qmail 1.03
Today I encountered a estrange thing, a disabled mailbox was accepting mail but not bouncing it.
In the panel the "user@tld.com" mailbox is disabled, if a email is sent to that address Qmail accepts it:
Jul 4 17:51:35 mx3 qmail-queue-handlers[27432]: Handlers Filter before-queue for qmail started ...
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: from=root@mx3
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: to=user@tld.com
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: handlers_stderr: SKIP
[Code] ....
No mail is bounced, nothing, the message is not in the mailbox.
Tested in several accounts the result is the same, even in a new created account.
View 2 Replies
View Related
Nov 23, 2014
I ran the script in KB article 123160 [1] to disable SSLv3 and avoid the POODLE vulnerability, but I recently discovered that this has caused all inbound emails to bounce. The bounce message says, "TLS Negotiation failed."
Here is Plesk version information:
# cat /usr/local/psa/version
11.5.30 CentOS 5 115140407.17
# cat /root/.autoinstaller/microupdates.xml
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<patches>
<product id="plesk" version="11.5.30" installed-at="20131109T085857">
<patch version="47" timestamp="" installed-at="20141123T162005" />
[URL] ....
View 3 Replies
View Related
