DNS: Rootservers Respond With Wrong Nameservers For All Domains
Jan 14, 2007
Ive always thought that I knew the DNS principles, but now something really strange is going on.
I have one domain (hosting.com), which runs the nameservers:
ns1.hosting.com = server1
ns2.hosting.com = server2
ns3.hosting.com = server3
ns4.hosting.com = server4
And a lot of normal domains: client1.com and client2.com. These domains have ns1.hosting.com, and ns2.hosting.com configured as nameserver. Hosting.com also had these configured.
The situation above worked well. Server3 and 4 were not used at all.
The problems started when I migrated hosting.com to use server3 and server4. I transfered the zonefiles of hosting.com to these servers, and edited the WHOIS info to reflect these changes. This worked: hosting.com was working from server3 and server4.
10 mins later the first downtime-message came in. Client1.com could not resolve. A quick check using dig showed why:
l.gtld-servers.net [192.41.162.30] ns3.hosting.com. ns4.hosting.com.
Somehow the root servers think that the client1.com and client2.com domain also have changed nameservers. But those are not changed, the wois info still points to ns1 and ns2.
So in some strange way the root servers now return ns3 and ns4 for all domains that use ns1.hosting.com & ns2.hosting.com in their WHOIS. I alway thought that the root servers got their info from the whois info of the domain. (Or better said: the registar). Why do the root servers return ns3 & ns4, while ns1 and ns2 are configured?
View 10 Replies
ADVERTISEMENT
May 17, 2007
I've been told by a few people that something's wrong with my nameservers. But I'm not sure what it is that's wrong.
the site => www.visualpoetry.ca
the DNSs: ns1.visualpoetry.ca / ns2.visualpoetry.ca
a zone check says:
Quote:
---- warning ----
w: Nameservers are all part of the same AS
* Adv: ZoneCheck
To avoid loosing all connectivity with the autoritative DNS in case of a routing problem inside your Autonomous System, it is advised to host the DNS on different AS.
*
All the nameservers are part of the same Autonomous System (AS number 30058), try to have some of them hosted on another AS.
* generic
w: Host doesn't reply to ICMP requests (firewall?)
* ns1.wablue.info./66.90.101.202
* ns2.wablue.info./66.90.65.34
w: Reverse for the nameserver IP address doesn't match
* ns2.wablue.info./66.90.65.34
* ns1.wablue.info./66.90.101.202
I'm not sure how to interpret this.
View 7 Replies
View Related
Jan 19, 2008
I was looking for a tool that would allow me to enter a Nameserver, and it would then return the Domains that use that Nameserver in its DNS.
I see domaintools.com has a tool that does it, but it costs. Is there a free one available?
View 5 Replies
View Related
Nov 28, 2008
I have a client who can't change the nameservers on his .co.zw domain to my nameservers due to restrictions.
Is it possible to have him forward the domain to his IP and use it that way?
Does anyone have any experience with .co.zw domains?
View 5 Replies
View Related
Aug 28, 2007
I registred with ENOM a IO and a JP Domain and tried to enter my nameservers which are correct configured. I always use them for other com, net, org, info and biz domains which I registred with ENOM.
But for the JP and the IO Domains, ENOM is not accepting my nameservers and I get the following error message:
For the IO Domain:
Quote:
nRRPResponseCode 507
Nameserver ns1.mynameserver.com cannot be registered
Errors may be due to changes that may take 1 hour to 4 days to take effect at the
registry.
For the JP Domain:
Quote:
Updating nameservers failed. Please try again.531
I contacted ENOM and got the following responce:
Quote:
This error message usually indicates that the name server is not registered in the appropriate zone. Please contact the sponsoring registrar of mynameserver.com and request that they add the out-of-zone records for the name servers to be used in the .IO zone.
But what does this mean? Do I need to configure my nameservers different for IO or JP domains? Or do I need to register my nameservers somewhere for this domains?
View 6 Replies
View Related
Dec 30, 2007
I currently have a domain at Network Solutions and I am going to transfer that domain to Godaddy. I also have 2 nameservers that I am running associated with that domain (ns1.mydomain.com & ns2.mydomain.com) that are also registered with Network Solutions.
My question is what happens to those nameservers when the transfer takes place? Will Network Solutions remove them from their database at that time? My concern is when the transfer happens there will be no nameservers registered at Godaddy and my sites will be down. Anyone know how that works?
View 2 Replies
View Related
Jul 7, 2007
This is a legitimate request .. nothing dodgy.
Is it possible for me find out which domains are currently using 2 particular nameservers?
I think not but thought I'd confirm here.
View 1 Replies
View Related
Nov 6, 2009
Is it possible to get a list of domains that are using a specific pair of nameservers?
We've purchased several hosting companies over the years, and would like to consolidate the nameservers we are using and need to manage.
Thus.. we need to figure out which customers are using which nameservers.
So getting a list of which domains are using the nameservers we don't want to use any more would be a nice easy way. Then we can contact those specific customers only.
View 4 Replies
View Related
Feb 25, 2008
Man that was a badly worded title. My question is, for example any domain parking program, all you have to do is point your domain nameservers to the nameservers of the parking company. How can I do this for me?
Sorry if it's worded a bit weird, but I want people to be able to set their nameservers to mine, and that domain would become similar to a parked domain that I'd make through cpanel. Then I'm assuming I can use a little script or mod_rewrite to configure it (for example, parkeddomain.com would be rewritten to mysite.com/redir.php?a=parkeddomain.com).
1) What are some things/terms/programs I can look into for this?
2) Is this possible on shared hosting or would I need a dedicated?
View 4 Replies
View Related
Jun 17, 2008
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]
We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd
tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
Connected to ks357687.kimsufi.com.
Escape character is'^]'.
Get
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<hr>
<address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop
Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused
View 9 Replies
View Related
Oct 25, 2008
I was on a 100mbps shared port with a dedicated server from FDC and I use it only for downloads. The downloads took a little long to start but once they did, were as fast as they could be.
Thinking this was definitely a shared bandwidth problem, I ordered a dedicated port of 25mbps from FDC to fix it but it seems to have gotten worse.
The website uses around 10/15mbps but it takes forever for the server to respond. Even logging into cPanel takes around 40/50 seconds for the dialog box to appear but everything is fast once I log into my cPanel.
I also hired a sys admin to look into the server and He says everything is fine. I don't know what to do. I could increase my port bandwidth higher but it'll be disappointing if I do and it's just a waste of bandwidth (and money!)
View 5 Replies
View Related
Dec 18, 2007
I recently contacted 'theprimehost' with some pre-sales questions about their service.
However I received no replies, so posted on their forums in hope to get a reply from Darrell. However I found that the thread was removed. The questions I asked were as below:
1. Can I host MODx/Textpattern on Primehost space?
2. Do I get access to mod_rewrite / SSH with your account? (As an individual and as reseller)
3. How much do you charge for a dedicated IP?
4. Do you oversell or allow overselling with reseller accounts? How is the bandwidth calculated?
5. How can I monitor the uptime of your servers?
6. Is domain alias enabled?
7. Does mail enable me to set vacation auto-replies?
8. How frequently do you backup data?
9. Do you accept payments for 2 years at a time?
10. I didn't find information about your datacenter on the site. Can you please tell me more about it?
11. Can I avail of the 20% discount in addition to the 2 for 1 offer? Till when are these two offers valid?
I wonder why nobody at 'theprimehost' bothered to reply to my queries and deleted the thread so promptly. Anybody knows whats up with the guys? I have seen great reviews about them on the forum so this was unexpected.
I know Darrell is active on this forum - maybe he can clarify...
View 5 Replies
View Related
May 6, 2013
I have an Xitami server and am migrating to apache httpd. I have the regular server working fine. I tried configuring ssl, but no requests are coming through. I know 443 is open on the router because it works fine under Xitami. I checked the logs and it si starting fine. I am attaching my httpd.conf and the startup log. If I try to access the website using https, it just times out and nothing goes in the log file. I replaced my domain with domain.com. I have tried many different examples, but cannot get it to work and am not sure what to do.
View 5 Replies
View Related
Aug 26, 2008
One of our accounts has been suspended by Dotable.
It is under quota for diskspace and bandwidth and has been paid for in advance.
Dotable will not respond to the ticket asking why the account has been suspended and what we have to do to get it back up.
I have posted on the Dotable forum (in the 'Dotable Support Forum) about this but nobody has replied (I can't link to it because I don't have more than 5 posts).
Has anyone got any suggestions about what I can do to find out why the account has been suspended and how to get it back up if Dotable doesn't reply?
View 14 Replies
View Related
Aug 12, 2009
its not actually my domain but the other day an older lady contacted me frustrated because she had lost her login info for her dog kennel site. She tried for over a month to get a hold of the company but no one returns her calls or emails. She contacted me to see if there was anything I could do. The first thing I did was fire off an email and call the number I was given. Left a msg to call me back, waited a few days sent another email and made another phone call...nothing. So I did some sniffing around and found the company had changed names to Black Wire Marketing (from teknon media). So I sent emails to them and made phone calls....it was the same phone system as the previous number.
My question is this, is there any protocol for recovering a website or more importantly the domain, if the hosting company has left town? The original site definitely resembles a flyby night reseller setup and not one that had a lot of thought put into it, wreaks of IM (why do IM people think they make good hosting service providers?).
View 4 Replies
View Related
Feb 2, 2015
I'm using plesk with CentOS 6.6
After setting up some e-mail accounts over the plesk gui I tried to connect via a mail software (like thunderbird).
This failed with every combination of settings I tried. So I checked if the POP3/IMAP services are running correctly using telnet.
I connected using the following command:
Code:
telnet <host-ip> 110
The response was:
Code:
Trying <host-IP>...
Connected to <host-IP>.
Escape character is '^]'.
-ERR Cannot connect to POP server <host-IP> (<host-IP>:110), NB connect error 1460
Connection closed by foreign host.
Did I miss to enable a setting?
The Plesk gui schows me, that the corresponding services are running...
View 2 Replies
View Related
May 26, 2008
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
View 7 Replies
View Related
Apr 18, 2008
I have 2 wordpress blogs, and I'd like a few different domains to be shared on each of them.
Using some exemples, suppose I have domains from domainA.com to domainE.com. domainA.com is my main domain and the others are addon domains.
Today Blog1 is using blog.domainA.com, and domainB.com and domainC.com use WebRedirect to blog.domainA.com. And Blog2 uses domainD.com with WebRedirect on domainE.com too.
To access a post like /2008/02/02/this-is-a-nice-post, it is available only at blog.domainA.com, and not by domains B and C. I'd like they 3 to be able to access all posts directly, without redirecting to domain A.
To do that, I suppose I'd need to do some config on cPanel. And also on wordpress, even if I replicate it over other domains it insists to redirect to its configured domain.
I was thinking on the possibility of using symbolic link (ln -s) on their folders to blog.domainA.com folder, but I don't have access to shell on SSH so I'd like to know if it would work before trying.
In a real exemple of what I want, these domains all share the same phpBB forum: forumpcs.com.br, extremepc.com.br, forumdohardware.com.br.
Do u know if symbolic link would work to share the same wordpress? And how to make wordpress stop redirecting to blog.domainA.com?
View 14 Replies
View Related
Mar 5, 2008
i have CentOs5 / Plesk Panel / VPS Server ...
and i install APF now with this /etc/apf/conf.apf FILE ......
PHP Code:
IG_TCP_CPORTS="20,21,22,25,53,80,110,143,443,465,993,995,8443"IG_UDP_CPORTS="37,53,873"EGF="1"EG_TCP_CPORTS="20,21,22,25,53,37,43,80,113,443,465,873,5224"EG_UDP_CPORTS="53,873"
==================================
and i changed the interface to this venet0
PHP Code:
# Untrusted Network interface(s); all traffic on defined interface will be# subject to all firewall rules. This should be your internet exposed# interfaces. Only one interface is accepted for each value.IFACE_IN="venet0"IFACE_OUT="venet0"
==================================
when i finish it and restart my apf its shows me like this ???
PHP Code:
[root@box ~]# apf -sapf(3107): {glob} activating firewallapf(3149): {glob} determined (IFACE_IN) venet0 has address 127.0.0.1apf(3149): {glob} determined (IFACE_OUT) venet0 has address 127.0.0.1apf(3149): {glob} loading preroute.rulesiptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {resnet} downloading http://r-fx.ca/downloads/reserved.networksapf(3149): {resnet} download of http://r-fx.ca/downloads/reserved.networks failedapf(3149): {glob} loading reserved.networksapf(3149): {glob} SET_REFRESH is set to 10 minutesapf(3149): {glob} loading bt.rulesapf(3149): {dshield} downloading http://feeds.dshield.org/top10-2.txtapf(3149): {dshield} download of http://feeds.dshield.org/top10-2.txt failedapf(3149): {sdrop} downloading http://www.spamhaus.org/drop/drop.lassoapf(3149): {sdrop} parsing drop.lasso into /etc/apf/sdrop_hosts.rulesapf(3149): {sdrop} loading sdrop_hosts.rulesapf(3149): {glob} loading common drop portsapf(3149): {blk_ports} deny all to/from tcp port 135:139apf(3149): {blk_ports} deny all to/from udp port 135:139apf(3149): {blk_ports} deny all to/from tcp port 111apf(3149): {blk_ports} deny all to/from udp port 111apf(3149): {blk_ports} deny all to/from tcp port 513apf(3149): {blk_ports} deny all to/from udp port 513apf(3149): {blk_ports} deny all to/from tcp port 520apf(3149): {blk_ports} deny all to/from udp port 520apf(3149): {blk_ports} deny all to/from tcp port 445apf(3149): {blk_ports} deny all to/from udp port 445apf(3149): {blk_ports} deny all to/from tcp port 1433apf(3149): {blk_ports} deny all to/from udp port 1433apf(3149): {blk_ports} deny all to/from tcp port 1434apf(3149): {blk_ports} deny all to/from udp port 1434apf(3149): {blk_ports} deny all to/from tcp port 1234apf(3149): {blk_ports} deny all to/from udp port 1234apf(3149): {blk_ports} deny all to/from tcp port 1524apf(3149): {blk_ports} deny all to/from udp port 1524apf(3149): {blk_ports} deny all to/from tcp port 3127apf(3149): {blk_ports} deny all to/from udp port 3127apf(3149): {pkt_sanity} set active PKT_SANITYapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL NONEapf(3149): {pkt_sanity} deny inbound tcp-flag pairs SYN,FIN SYN,FINapf(3149): {pkt_sanity} deny inbound tcp-flag pairs SYN,RST SYN,RSTapf(3149): {pkt_sanity} deny inbound tcp-flag pairs FIN,RST FIN,RSTapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,FIN FINapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,URG URGapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ACK,PSH PSHapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL FIN,URG,PSHapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL SYN,RST,ACK,FIN,URGapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL ALLapf(3149): {pkt_sanity} deny inbound tcp-flag pairs ALL FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ALL NONEapf(3149): {pkt_sanity} deny outbound tcp-flag pairs SYN,FIN SYN,FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs SYN,RST SYN,RSTapf(3149): {pkt_sanity} deny outbound tcp-flag pairs FIN,RST FIN,RSTapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,FIN FINapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,PSH PSHapf(3149): {pkt_sanity} deny outbound tcp-flag pairs ACK,URG URGapf(3149): {pkt_sanity} deny all fragmented udpapf(3149): {pkt_sanity} deny inbound tcp port 0apf(3149): {pkt_sanity} deny outbound tcp port 0apf(3149): {blk_p2p} set active BLK_P2Papf(3149): {blk_p2p} deny all to/from tcp port 1214apf(3149): {blk_p2p} deny all to/from udp port 1214apf(3149): {blk_p2p} deny all to/from tcp port 2323apf(3149): {blk_p2p} deny all to/from udp port 2323apf(3149): {blk_p2p} deny all to/from tcp port 4660:4678apf(3149): {blk_p2p} deny all to/from udp port 4660:4678apf(3149): {blk_p2p} deny all to/from tcp port 6257apf(3149): {blk_p2p} deny all to/from udp port 6257apf(3149): {blk_p2p} deny all to/from tcp port 6699apf(3149): {blk_p2p} deny all to/from udp port 6699apf(3149): {blk_p2p} deny all to/from tcp port 6346apf(3149): {blk_p2p} deny all to/from udp port 6346apf(3149): {blk_p2p} deny all to/from tcp port 6347apf(3149): {blk_p2p} deny all to/from udp port 6347apf(3149): {blk_p2p} deny all to/from tcp port 6881:6889apf(3149): {blk_p2p} deny all to/from udp port 6881:6889apf(3149): {blk_p2p} deny all to/from tcp port 6346apf(3149): {blk_p2p} deny all to/from udp port 6346apf(3149): {blk_p2p} deny all to/from tcp port 7778apf(3149): {blk_p2p} deny all to/from udp port 7778apf(3149): {glob} loading log.rulesapf(3149): {glob} virtual net subsystem disabled.apf(3149): {glob} loading main.rulesapf(3149): {glob} opening inbound tcp port 20 on 0/0apf(3149): {glob} opening inbound tcp port 21 on 0/0apf(3149): {glob} opening inbound tcp port 22 on 0/0apf(3149): {glob} opening inbound tcp port 25 on 0/0apf(3149): {glob} opening inbound tcp port 53 on 0/0apf(3149): {glob} opening inbound tcp port 80 on 0/0apf(3149): {glob} opening inbound tcp port 110 on 0/0apf(3149): {glob} opening inbound tcp port 143 on 0/0apf(3149): {glob} opening inbound tcp port 443 on 0/0apf(3149): {glob} opening inbound tcp port 465 on 0/0apf(3149): {glob} opening inbound tcp port 993 on 0/0apf(3149): {glob} opening inbound tcp port 995 on 0/0apf(3149): {glob} opening inbound tcp port 8443 on 0/0apf(3149): {glob} opening inbound udp port 37 on 0/0apf(3149): {glob} opening inbound udp port 53 on 0/0apf(3149): {glob} opening inbound udp port 873 on 0/0apf(3149): {glob} opening outbound tcp port 20 on 0/0apf(3149): {glob} opening outbound tcp port 21 on 0/0apf(3149): {glob} opening outbound tcp port 22 on 0/0apf(3149): {glob} opening outbound tcp port 25 on 0/0apf(3149): {glob} opening outbound tcp port 53 on 0/0apf(3149): {glob} opening outbound tcp port 37 on 0/0apf(3149): {glob} opening outbound tcp port 43 on 0/0apf(3149): {glob} opening outbound tcp port 80 on 0/0apf(3149): {glob} opening outbound tcp port 113 on 0/0apf(3149): {glob} opening outbound tcp port 443 on 0/0apf(3149): {glob} opening outbound tcp port 465 on 0/0apf(3149): {glob} opening outbound tcp port 873 on 0/0apf(3149): {glob} opening outbound tcp port 5224 on 0/0apf(3149): {glob} opening outbound udp port 53 on 0/0apf(3149): {glob} opening outbound udp port 873 on 0/0apf(3149): {glob} opening inbound icmp type 3 on 0/0apf(3149): {glob} opening inbound icmp type 5 on 0/0apf(3149): {glob} opening inbound icmp type 11 on 0/0apf(3149): {glob} opening inbound icmp type 0 on 0/0apf(3149): {glob} opening inbound icmp type 30 on 0/0apf(3149): {glob} opening inbound icmp type 8 on 0/0apf(3149): {glob} opening outbound icmp all on 0/0iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {glob} resolv dns discovery for 207.218.192.38iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295iptables: Unknown error 4294967295apf(3149): {glob} loading postroute.rules
View 6 Replies
View Related
May 21, 2007
I'm just looking for some background information or a place where I can learn more about this.
Here's the problem:
The web site runs on a dedicated Apache server. There's 2 SSL certificates installed, one for e-commerce for https://www.mysite.com and one to help with the administrative interface for https://admin.mysite.com. I run a custom php application that forces the web page from http://www.mysite.com to https://www.mysite.com when going to an e-commerce page.
Generally everything runs Ok but a few times this year there has been a problem where the php application points to https://www.mysite.com/ecom.php but instead it gets https://admin.mysite.com/ecom.php and gets a page not found.
In discussing this with my web hosting company they claim they haven't changed anything but they do manage to fix the problem and get the web site working correctly again.
I generally figure that the web hosting company has done some type of maintenance on the web server and messed-up the dns entries or something for the SSL part of the web site but this is really outside my area of experience. I'm trying to understand what went wrong and where the entries are that determine when going to SSL which SSL certificate/URL is used.
View 2 Replies
View Related
Jun 1, 2008
My server with APF (firewall script) with BFD logs over 1215 events today of some hack user or bot trying to login to my server from various of IP trying many kind of usernames...
Is it possible to customize BFD to automatically ban the IP directly if the username they try to login with it was wrong 2 times?
For example the username is qwerty
The hack is trying with many usernames john, root, master, boot, etc...
View 5 Replies
View Related
Jul 25, 2008
A friend of mine has a server that the provider claims is a Core2Duo, but looking at /proc/cpuinfo, the cpu is shown as:
Intel(R) Pentium(R) D CPU 000 @ 1.86GHz
What would cause this? I'm not saying the host is lying, I've just never seen this before and I haven't found anyone else with this problem on google. The processor is supposed to be a e6300, so the 1.86GHz speed is right. Also, this has happened on 2 different linux distros.
View 7 Replies
View Related
Jun 4, 2007
I have bought a dedicated server with FDC servers and installed a script. Initially everything was working fine but now the site is not accessible. Everything is alright with the script installed but looks like there is some issue with the DNS settings. When I ping the IP address (it's dedicated ip address) it gives me an error. When I Ping the domain name, it just closes the window after few mins. Can someone experienced with WHM help me to fix the DNS settings? Of course, I am ready to pay for your help (though i might not have a very higher budget)
View 5 Replies
View Related
Feb 22, 2007
I have a mysql-only server and the server is constantly > 30 in server load. I'm ousted as to what is wrong with mysql and what can be done to optimize it. Using mysql report to generate the following:
Quote:
MySQL 4.1.22-standard uptime 0 0:22:30 Thu Feb 22 07:14:45 2007
__ Key _________________________________________________________________
Buffer used 30.93M of 256.00M %Used: 12.08
Current 60.41M %Usage: 23.60
Write ratio 0.891
Read ratio 0.001
__ Questions ___________________________________________________________
Total 416.13k 308.2/s
DMS 136.54k 101.1/s %Total: 32.81
Com_ 120.17k 89.0/s 28.88
COM_QUIT 117.10k 86.7/s 28.14
QC Hits 44.35k 32.9/s 10.66
-Unknown 2.04k 1.5/s 0.49
Slow 19 0.0/s 0.00 %DMS: 0.01
DMS 136.54k 101.1/s 32.81
SELECT 82.50k 61.1/s 19.82 60.42
UPDATE 27.28k 20.2/s 6.56 19.98
REPLACE 10.85k 8.0/s 2.61 7.95
INSERT 7.98k 5.9/s 1.92 5.84
DELETE 7.93k 5.9/s 1.91 5.81
Com_ 120.17k 89.0/s 28.88
change_db 119.37k 88.4/s 28.69
admin_comma 791 0.6/s 0.19
show_variab 3 0.0/s 0.00
__ SELECT and Sort _____________________________________________________
Scan 6.38k 4.7/s %SELECT: 7.73
Range 6.35k 4.7/s 7.70
Full join 0 0/s 0.00
Range check 0 0/s 0.00
Full rng join 0 0/s 0.00
Sort scan 3.99k 3.0/s
Sort range 9.92k 7.4/s
Sort mrg pass 1.27k 0.9/s
__ Query Cache _________________________________________________________
Memory usage 5.85M of 32.00M %Used: 18.28
Block Fragmnt 22.41%
Hits 44.35k 32.9/s
Inserts 75.31k 55.8/s
Insrtrune 75.31k:1 55.8/s
Hit:Insert 0.59:1
__ Table Locks _________________________________________________________
Waited 54.03k 40.0/s %Total: 31.44
Immediate 117.80k 87.3/s
__ Tables ______________________________________________________________
Open 763 of 1500 %Cache: 50.87
Opened 769 0.6/s
__ Connections _________________________________________________________
Max used 651 of 650 %Max: 100.15
Total 119.74k 88.7/s
__ Created Temp ________________________________________________________
Disk table 24 0.0/s
Table 3.75k 2.8/s
File 2.55k 1.9/s
__ Threads _____________________________________________________________
Running 106 of 132
Cached 36 of 128 %Hit: 96.43
Created 4.28k 3.2/s
Slow 4 0.0/s
__ Aborted _____________________________________________________________
Clients 5.28k 3.9/s
Connects 1.16k 0.9/s
__ Bytes _______________________________________________________________
Sent 2.03G 1.5M/s
Received 159.51M 118.2k/s
And my my.cnf
Quote:
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
max_connections = 650
key_buffer = 256M
myisam_sort_buffer_size = 64M
skip-locking
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 1M
table_cache = 1500
thread_cache_size = 128
wait_timeout = 10
connect_timeout = 5
tmp_table_size = 128M
max_allowed_packet = 36M
max_connect_errors = 10
query_cache_limit = 1M
query_cache_size = 32M
query_cache_type = 1
max_user_connections =600
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
[mysqldump]
quick
max_allowed_packet = 16M
[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M
[mysqlhotcopy]
interactive-timeout
View 5 Replies
View Related
Jul 11, 2009
I'm having a problem with my /usr. When I check it through WHM it's 100% full. But when I check it through SSH ( du -sh /usr ). it's almost 50% full
is there a way to let WHM recalculates the disk usage for /usr.
i already tried to empty it. but the 100% in WHM never changed. I deleted about 3GB of files. but in WHM, still saying 9.4GB used from 9.9GB
View 14 Replies
View Related
Jul 28, 2008
ServInt:
speedtest 300-500kb/s from SF
burstable ram
99.730% uptime (hyperspin)
great customer service
Wiredtree:
speedtest 80-200kb/s from SF
no burstable ram
99.993% uptime (hyperspin)
great customer service
what to do....
can any servint vps users please PM me their url?
View 2 Replies
View Related
Jun 8, 2008
We Ask to forgive the bad English.
All orderly ed without mistake.
Apache/1.3.41
add In httpd.conf to virtual őîńňó for instance:
LayoutHeader "<H1>Test</H1>"
the text appears, but not there where it is necessary:
<H1>TEST</H1>
........
<head>
<title>title</title>
<meta http-equiv="Content-Type" content="text/html; charset==utf-8"/>
</head>
<body>
the text of the site.....
That is required?
It is Necessary ÷ňîá was removed so:
..........
<head>
<title>title</title>
<meta http-equiv="Content-Type" content="text/html; charset==utf-8"/>
</head>
<body><H1>TEST</H1>........
View 5 Replies
View Related
Oct 6, 2007
I have Core2Quad Q6600 + CentOs 5.0, Cpanel/WHM, but when i check Server Information i saw this:
Quote:
Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #1 speed: 1596.000 MHz
Processor #1 cache size: 4096 KB
Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #2 speed: 1596.000 MHz
Processor #2 cache size: 4096 KB
Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #3 speed: 1596.000 MHz
Processor #3 cache size: 4096 KB
Processor #4 Vendor: GenuineIntel
Processor #4 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #4 speed: 2394.000 MHz
Processor #4 cache size: 4096 KB
Can anyone tell my why it doesn't show correct speed.
Quote:
Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Processor #3 speed: 1596.000 MHz
Processor #3 cache size: 4096 KB
View 1 Replies
View Related
