This is a legitimate request .. nothing dodgy.
Is it possible for me find out which domains are currently using 2 particular nameservers?
I think not but thought I'd confirm here.
I updated to make my domain also be nameservers ns1 and ns2 with ip's tied to them. How do I know when the nameservers are working and ok to use?
Is there something physical I can do other than switching my domain to point to it? I really dont want to do that cause then my site could be down while it is still propogating.
I hired a guy to secure and setup nameserves on my dedicated box. I'm on a time crunch and have not heard from him in 24 hours, so thought I'd ask here.
How can I find out if nameservers are running on my box, and what IP they are running on?
I was looking for a tool that would allow me to enter a Nameserver, and it would then return the Domains that use that Nameserver in its DNS.
I see domaintools.com has a tool that does it, but it costs. Is there a free one available?
I have a client who can't change the nameservers on his .co.zw domain to my nameservers due to restrictions.
Is it possible to have him forward the domain to his IP and use it that way?
Does anyone have any experience with .co.zw domains?
I registred with ENOM a IO and a JP Domain and tried to enter my nameservers which are correct configured. I always use them for other com, net, org, info and biz domains which I registred with ENOM.
But for the JP and the IO Domains, ENOM is not accepting my nameservers and I get the following error message:
For the IO Domain:
Quote:
nRRPResponseCode 507
Nameserver ns1.mynameserver.com cannot be registered
Errors may be due to changes that may take 1 hour to 4 days to take effect at the
registry.
For the JP Domain:
Quote:
Updating nameservers failed. Please try again.531
I contacted ENOM and got the following responce:
Quote:
This error message usually indicates that the name server is not registered in the appropriate zone. Please contact the sponsoring registrar of mynameserver.com and request that they add the out-of-zone records for the name servers to be used in the .IO zone.
But what does this mean? Do I need to configure my nameservers different for IO or JP domains? Or do I need to register my nameservers somewhere for this domains?
I currently have a domain at Network Solutions and I am going to transfer that domain to Godaddy. I also have 2 nameservers that I am running associated with that domain (ns1.mydomain.com & ns2.mydomain.com) that are also registered with Network Solutions.
My question is what happens to those nameservers when the transfer takes place? Will Network Solutions remove them from their database at that time? My concern is when the transfer happens there will be no nameservers registered at Godaddy and my sites will be down. Anyone know how that works?
Is it possible to get a list of domains that are using a specific pair of nameservers?
We've purchased several hosting companies over the years, and would like to consolidate the nameservers we are using and need to manage.
Thus.. we need to figure out which customers are using which nameservers.
So getting a list of which domains are using the nameservers we don't want to use any more would be a nice easy way. Then we can contact those specific customers only.
Man that was a badly worded title. My question is, for example any domain parking program, all you have to do is point your domain nameservers to the nameservers of the parking company. How can I do this for me?
Sorry if it's worded a bit weird, but I want people to be able to set their nameservers to mine, and that domain would become similar to a parked domain that I'd make through cpanel. Then I'm assuming I can use a little script or mod_rewrite to configure it (for example, parkeddomain.com would be rewritten to mysite.com/redir.php?a=parkeddomain.com).
1) What are some things/terms/programs I can look into for this?
2) Is this possible on shared hosting or would I need a dedicated?
Ive always thought that I knew the DNS principles, but now something really strange is going on.
I have one domain (hosting.com), which runs the nameservers:
ns1.hosting.com = server1
ns2.hosting.com = server2
ns3.hosting.com = server3
ns4.hosting.com = server4
And a lot of normal domains: client1.com and client2.com. These domains have ns1.hosting.com, and ns2.hosting.com configured as nameserver. Hosting.com also had these configured.
The situation above worked well. Server3 and 4 were not used at all.
The problems started when I migrated hosting.com to use server3 and server4. I transfered the zonefiles of hosting.com to these servers, and edited the WHOIS info to reflect these changes. This worked: hosting.com was working from server3 and server4.
10 mins later the first downtime-message came in. Client1.com could not resolve. A quick check using dig showed why:
l.gtld-servers.net [192.41.162.30] ns3.hosting.com. ns4.hosting.com.
Somehow the root servers think that the client1.com and client2.com domain also have changed nameservers. But those are not changed, the wois info still points to ns1 and ns2.
So in some strange way the root servers now return ns3 and ns4 for all domains that use ns1.hosting.com & ns2.hosting.com in their WHOIS. I alway thought that the root servers got their info from the whois info of the domain. (Or better said: the registar). Why do the root servers return ns3 & ns4, while ns1 and ns2 are configured?
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
how can i do a search for all files (probs using regex) of files consisting purely of numbers?
for e.g. find:
53243.php
24353.php
24098.php
(always have 5 numbers).
seems one of my accounts has had some script run which generated a bunch of these in various subfolders, and the php file basically does a callback to www3.rssnews.ws and www3.xmldata.info, which seem to be some sort of spyware servers.
I have 2 wordpress blogs, and I'd like a few different domains to be shared on each of them.
Using some exemples, suppose I have domains from domainA.com to domainE.com. domainA.com is my main domain and the others are addon domains.
Today Blog1 is using blog.domainA.com, and domainB.com and domainC.com use WebRedirect to blog.domainA.com. And Blog2 uses domainD.com with WebRedirect on domainE.com too.
To access a post like /2008/02/02/this-is-a-nice-post, it is available only at blog.domainA.com, and not by domains B and C. I'd like they 3 to be able to access all posts directly, without redirecting to domain A.
To do that, I suppose I'd need to do some config on cPanel. And also on wordpress, even if I replicate it over other domains it insists to redirect to its configured domain.
I was thinking on the possibility of using symbolic link (ln -s) on their folders to blog.domainA.com folder, but I don't have access to shell on SSH so I'd like to know if it would work before trying.
In a real exemple of what I want, these domains all share the same phpBB forum: forumpcs.com.br, extremepc.com.br, forumdohardware.com.br.
Do u know if symbolic link would work to share the same wordpress? And how to make wordpress stop redirecting to blog.domainA.com?
Will domains still function if they have differing nameservers at the registry from what they do on the server side? i.e. domain1.com pointing to ns1/2.example.com at the registry but on the server the DNS zone has it as ns1/2.example2.com, baring in mind both sets of nameservers are pointing at the same server.
View 2 Replies View RelatedI have purchased a reseller account from www.reseller.net (not real names) They provide me with ns1.reseller.net and ns2.reseller.net, as well as the two associated ip addresses. They tell me to use these 2 ip addresses to set up my own custom nameservers.
I want my own nameservers - ns1.mydomain.com and ns2.mydomain.com. Tech support at www.reseller.net tells me thay cannot help me. They tell me to go to the company where I purchased and manage the domain name www.mydomain.com.
I do, and find the control panel page where I -CREATE NAME SERVER-. This I do, and I use the above mentioned ip addresses. This seems to work. When I go back to this control panel page the next day, the entries I made are still there. Yet, I cannot "ping" my nameservers.
Now what? I have tried "google-ing" and not being a super-tech, I get lost. It appears that I must make some changes in my WHM, (I have a WHM...), but I have no access to any "Server" settings.
I have another reseller account with a totally different company, and when I asked them to set up custom nameservers, they just "did it" for me. Again, the hosting company was not related to the domain registering company.
I am experimenting with setting up my first unmanaged dedicated server.
I have directadmin as a cp.
I have 5 separate IP's available to me.
I went to my domain registrar and set up host as ns1.mydomain.com and ns2.mydomain.com using my first two IP's that are available.
My question now is what is the best way to use my three remaining IP's? Do I set them up as completely different domain nameservers ie. ns1.otherdomain.com etc.? Out of those three, I thought you need two IP's per nameserver domain? Is that wrong thinking?
I don't want any relationship shown in a whois dns info between the ips.
How to configure DNS(nameservers) without cP/WHM and any other Control Panel. I can use your only SSH for it.
OS = CentOS5
DNS Server: Bind
If i create a vps using openvz and use a new ip for that vps e.x:
123.456.789.0
What nameservers i must use to point my domain to that vps?
NS1 <--- 123.456.789.0
NS2 <--- ?
how can i run some VPS(diferent ip's) in a DedicatedServer with same nameserver.
example:
all sites in VPS1 using ip: 10.10.10.1
all sites in VPS2 using ip: 10.10.10.2
all sites in VPS3 using ip: 10.10.10.3
all in a DedicatedServer
now i want using ns1.dns.com for all sites.
xen/openvz on Centos/RHLE used.
I recently bourght a dedicated server, and found out I don't know whta my name servers are, the company gave me there nameservers, I was fine, but when I input my name servers in namecheap or godaddy ect, I get this:
Quote:
There is some problem updating the NameServers
The problem is: nRRPResponseCode 541
I just have a question on setting up Nameservers in WHM. Is it necessary to add an "A" entry to the name servers, and if so, do I need to do so on both nameservers, or just the first one?
ns1.mysite.com
ns2.mysite.com
What's the reason/ necessarily for adding a A entry to a nameserver, and can it be skipped?
hello
i really rely on your expertise guys please help me!
a cpanel server A has some domains on host 1
a new cpanel server B is set ready for migration on host B.
the greek registrar i use,
by accident (As they say) switched ips for my nameservers from A to B and the migration has not been done!!!!
can i set up a record or something on server B to forward all traffic back to server A ???????
Sorry i'm not a network expert. That's why i'm here
thanks
simos
I have a domain at Enom and I have a use for it which would require it being assigned an IP address rather than nameservers in order to reach the server it would be hosted on - I have 2 questions please:-
Would doing it this way bring any penalties in search engine ranking, PR or any other problems?
How would it best be done at Enom?
i have started moving domains from Cpanel/whm server to my HSphere server that uses a new nameserver, but have come up against problem with the new NameServer.
When moving .biz .info i get error about nameserver not being resgistered, after doing some seaching it appears that some domain resgistrars (in this case 123reg) are starting to enforce a security feature whereby All registrars need the name server registered before you can point any domain name to the name server.
Diggin further i found this at stargate.com which where i have my HSphere service domain:
1.
Registering a Child Name Server as mentioned above is just the first step. The Child Name Server needs to be registered at the Registry to only serve as a non-authoritative Record should your Child Name Server not be resolvable in some extreme condition.
This Name Server would start working only after you have added an Address (A) Record or Canonical (CNAME) Record for this Name Server within the Zone for the domain name (of this Child Name Server) at your own DNS Server, thus binding the NS to the IP Address.
Examples
i. If you are running your own DNS Servers then you would need to add a Zone for the domain name your-domain-name.com and create an A Record like
ns1.your-domain-name.com. 38400 IN A 111.222.333.444
ii. If you wish to simply point your Name Servers to another Name Servers, you may add a CNAME Record to those (while ensuring that those Name Servers have an A Record within the Zone created for your Name Servers as well).
ns1.your-domain-name.com. 38400 IN CNAME ns1.service-provider.com
Also at ns1.service-provider.com there should be an Zone for your-domain-name.com with an A Record for ns1.your-domain-name.com, making it authoritative for resolving your-domain-name.com.
In most cases your ISP would have already created the above for you and you need not bother about the same.
My service domain, and one i am using for nameservers, HSphere dns settings looks like
Name TTL Class Type Data Action
cp.mydomain.net 86400 IN A 85.264.15.83 Click to delete
ns1.mydomain.net 86400 IN A 85.264.15.84 Click to delete
ns2.mydomain.net 86400 IN A 85.264.15.85 Click to delete
web.mydomain.net 86400 IN A 85.264.15.86 Click to delete
mail.mydomain.net 86400 IN A 85.264.15.87 Click to delete
mysql.mydomain.net 86400 IN A 85.264.15.88 Click to delete
So from what i tell i have furfilled critria?
I have to say i am a little confused over this!
I am thinking that maybe i have to make some changes at stargate.com or maybe get my co-lo provider to make changes?
I have created 2 nameservers and assigned unique IPs to them and I have my domain dhingana.org using them. Everything was fine until today when suddenly I cannot reach dhingana.org.
I restarted BIND, Apache and even my server but still the same issue. I checked that Apache is still running.
My DNS reports for dhingana.org says:
A timeout occurred getting the NS records from your nameservers! None of your nameservers responded fast enough. They are probably down or unreachable. I can't continue since your nameservers aren't responding. If you have a Watchguard Firebox, it's due to a bug in their DNS Proxy, which must be disabled (31 Jul 2006 UPDATE: several years after being informed of this, there is a rumor that there is a fix that allows the Watchguard DNS proxy to work).
I have added a new ip for my nameserver3 and now it is pingable... But when I try to point a domain it says something like "check SOA record for your nameserver3" etc...
How can I add SOA records for this new nameserver via whm or?
Just got a new dedicated box (Fedora 5/CPanel/WHM). I didn't realize I had to set up my own nameservers with it. Definitely not a subject I am well versed in. Anyone know where I can find out how to get started?
View 9 Replies View RelatedI have a question on how to set up (clone) two nameservers.
I have two VPS' with two IPs that are totaly independent of each other. Both running ispCP with Apache2, mail, ftp, mysql, AND bind9 as DNS managment.
So. I want these two server to be as independent as they are, BUT they should share NameServers with each other.
Something like this:
host1:
ns1.domain.com = host1
ns2.domain.com = host2
host2:
ns1.domain.com = host1 (or host2?? = inverted)
ns2.domain.com = host2 (or host1?? = inverted)
A lot of domains are running more then one NameServer, but I could not find any tutorial on how to "clone" the NS from one to an other. Is it enough to just add some kind of "transfer to IP setting" in bind, or do I have to have scripts that download settings and files from one server to an other regularly?
Webmin ...
View 2 Replies View Related
