I am unable to connect to corehoster at all again --
I have been having issues since I opened my alpha master reseller account
Any reseller account I create cant create cleints..
I am even unable to enter tickets or send email to them since they are unreachable
Nick S refuses to refund my account .
Any one else having issues with core hoster
I have been struggling with a couple of new servers that we want to run Centos 5 on. For a second assume that is our desire so going back to 4.x isn't an option yet.
Now while I mention Centos 5, the problem seems to be with PAM and x64.
When trying to login to the server via ssh, the login succeds but then immediately kicks the user out. I have tried this with root and another user created. I have set the UsePam option to no to try to resolve this in sshd_config.
On the H-Sphere forum I found this reference:
[url]
" if i try to connect with ssh and i enter the right password i get an error and ssh closes the connection. The answer already was in the ticket you opened:
Quote:
That is known bug dealt with PAM authentication.
The bug was fixed for i386 systems long time ago. But it was not fixed for x86_64 architecture.
We build FreeVPS kernel new version 1.5-13.1 for x86_64 architecture to fix the problem.
We also installed the kernel into the box IP 64.71.227.16.
Please reboot the box with the new FreeVPS kernel version: 2.6.9-freevps-1.5-13.1smp.
Let us know the result."
Does anyone know how to resolve this? A reinstall of PAM was attempted by a well known sysadmin here but to no avail.
I've been getting a lot of complaints today on my forum that users cannot view their websites which are subdomains on a seperate domain that I own. It makes no sense why they would have access to the forums which is on the same dedicated server, using the same IP, and with the same nameservers as the site they cannot access. This issue started last night out of nowhere.
Where should I even start looking? It appears to only be with overseas users since none of the US and Canadian users have any issues with either domains or their subdomains.
Yesterday I had to install a renewed SSL Certificate. Managed to get it installed, in Plesk under domains/www_mydomain_com, but I also deleted the default SSL from the server/certificates area... So then I was getting an dns 500 error when browsingour site and I could not start httpd from within plesk. Went in through SSH and tried to start it from there and got and error stating it could not find the SSLCA cert it was looking for. So I edited my httpd.include file to point to my new certificate. Now http works, but my email has stopped? What gives how could the two be related!
I can log into my webmail, compose message and when I send I get:
Warning: fsockopen(): php_hostconnect: connect failed in /usr/share/psa-horde/pear/Net/Socket.php on line 108
Warning: fsockopen(): unable to connect to 127.0.0.1:25 in /usr/share/psa-horde/pear/Net/Socket.php on line 108
I have started and stopped psa, qmail. Rebooted the server. I tried the telnet localhost 25 but I get connection refused. Anytime I check qmail status it says stopped. Don't know if that is right or not. I know I am not recieving emails asI have sent many today through other accounts and they all come back undeliverable.
We do run an online store as well so I am kinda nervous when our email goes down! Time to hire a server admin?
I am running Plesk 7.5.4 on Red Hat 9 on a Virtual Dedicated Server with GoDaddy.
Here is my "Component Info" from Plesk:
bind 9.2.1-16
coldfusion-support 7.3-2.96.118
courier-imap 3.0.8-rh9.build75050824.12
frontpage 5.0.2.2634
httpd 2.0.40-21.17.legacy.1.swsoft
mod_perl 1.99_07-5
mod_python 3.0.1-4
mysql 3.23.58-1.9
perl-Apache-ASP 2.57-rh9.build75050824.12
php 4.3.2-psa.rh9.1
psa 7.5.4-rh9.build75050824.12
psa-api-rpc 7.5.4-rh9.build75050930.11
psa-bu Component was not installed
psa-horde 3.0.5-rh9.build75050824.12
psa-imp 4.0.3-rh9.build75050824.12
psa-logrotate 3.7-rh9.build75050824.12
psa-manual-custom-skin-guide 7.5.4-rh9.build75050824.12
psa-proftpd 1.2.10-rh9.build75050824.12
psa-qmail 1.03-rh9.build75050824.12
psa-qmail-rblsmtpd 0.70-rh9.build75050824.12
samba 2.2.7a-8.9.0.1.swsoft
SSHTerm 0.2.2-rh9.build75050824.12
stunnel 4.04-3
webalizer 2.01_10-11
I am stuck in re-installing mysql server..... Everything I have removed even mysql service give reboot the machine but still not able to complete the installation.
At the end I receive error " Can't connect to Mysql server with LocalHost (10061)
By the way if port 3306 is not enabled in firewall can this issue be occurred because of this?
I just switched to a new server last month and Im having a problem where a lot of my members and even some of my mods are unable to connect to my website. They are just getting a page cannot be displayed error. The website is ftascene(dot)com. Is everyone here able to connect to the site, and any idea why not everyone would be able to connect?
View 5 Replies View RelatedI have not been able to connect to my server via browser, ftp or email since my server had a OS reload & security package installed.
If I disconnect and remove my wireless router I can access the server directly from the modem. When the Linksys WRT54G is connected I can go anywhere on the net with no problems, except my server.
Is there something they might have done at the server to block wireless router access?
I get a timed out message when I ping any of the IP's on the server with the wireless router connected.
Linksys has been of no help and I have talked with Clearwire who owns my modem.
When i go to my website or any page under the domain it's just white. Blank nothing, nada.
"Failed to receive status information from Apache. Unable to connect to local httpd server."
This error message appears when i click on "apache status".
Is this because of the network issue? Or is it because of something I did myself?
I did a google search and came up on some solution, I did them and nothing.
Lately whenever i try to connect to my Plesk Panel, I get Firefox's "Unable to connect" error and with Internet Explorer I get "Cannot display web page". I disabled all addons, still couldn't connect. Checked my Firewall, still nothing. I pinged the IP and got 51ms. My site is still up. And I just dont know what's wrong.
View 2 Replies View RelatedI've upgraded to 11, but when I try and apply updates, I'm getting
WARNING: Unable to connect to local default MySQL server. Read carefully article [URL] ..... for details.
I've followed the directions in the KB mentioned, but haven't had any luck yet.
After changing my web hosting (same system : VPS, same version of linux : CentOS 6 , but passage from Plesk 11 to 12), i am now unable to connect remotely via TCP-IP to my mysql databases (with third-party tools like Mysql Workbench, Toad...) ! I never met this problem before.
The only way to connect is to use a "Standard TCP-IP over SSH" connection method ... but i don't want (i did'nt need this method before) !
Though, remote connections are allowed from any host in the settings.
I recently upgraded to 12.0.18 and I am using Roundcube 1.0 from the panel. I read that the "Unable to connect to sieve serve" problem would be solved in version 12.It seems not. What to do?
View 12 Replies View RelatedI have the problem that I can't connect to my mailserver tru the mail client (Webmail works fine, I receive mails and can send mails)
But if i try to connect over mailclient I get this error in errorlog:
couriertls: connect: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher
What can I do to get connection over mailclient?
I have tried everything I know (I know not much)
I have rebooted it multiple times. I have terminated lots of account and now I have only 2 or three accounts.
I have removed all the fishy scripts. Done everything I can.
But it just becomes un responsive within a minute of re booting.
Its a Pentium 4 Single Core server.
1GB Ram and 160GB harddisk with cpane+WHM.
I get error
cpsrvd failed @ Thu Dec 11 19:50:43 2008. A restart was attempted automagically.
Failure Reason: Unable to connect to port 2086
I cannot even connect to server because within minutes the server hangs.
I have installed Plesk 11.x windows version. I use that for 1 month but now I want to login to panel by http://mysite.com:8880 get error:
The system cannot find the file specified. (Error code 2) at Unable to connect to pipe .pipeP_85da9518-b79d-49a6-a154-e5055dc53d7c
I had Plesk 10 installed on my openSUSE system (was a low version, maybe 11 or less) and then decided to upgrade to 11.5. So I did distribution upgrades to openSUSE 12.3 and everything went smoothly, except for some services like mysql and php. So I used Plesk autoinstaller to fix the php error and edited an outdated line in mysql configuration and both services ran smoothly!
Then I downloaded Plesk autoinstaller and ran the autoinstaller, but was surprised by this error message:
===> Checking for previous installation ... found.
ERR (3) [panel]: Error during product key mode determination, details: Unable to connect to database: ; trace: #0 /usr/local/psa/admin/plib/functions.php(2821): isPpaKeyRequired()
#1 /usr/local/psa/admin/plib/common_func.php3(11): require_once('/usr/local/psa/...')
#2 /usr/local/psa/admin/plib/api-common/cu.php(5): require_once('/usr/local/psa/...')
#3 /usr/local/psa/admin/sbin/httpdmng(8): include_once('/usr/local/psa/...')
#4 (main)
Unable to connect to database:
- My MySQL version is: 5.5.33 openSUSE package
- I did run mysql_upgrade with my admin username and password (password from: /etc/psa/.psa.shadow) and it worked successfully and fixed all of the errors, I did so after running the auto installer first, but then ran the installer again and the problem was still there
- I can access my web page, but it still doesn't connect to MySQL either.
I believe this is a problem with MySQL, but how can I make sure or detect what exactly the problem is
when I try to access to my plesk I obtain:
ERROR: PleskFatalException: Unable to connect to database: Access denied for user 'admin'@'localhost' to database 'psa' (auth.php:142).
If I restart with ssh /etc/init.d/psa start and I check plesk_11.5.30_reset_instance_data.log
I note: ERROR 1044 (42000): Access denied for user 'admin'@'localhost' to database 'mysql'.
Since we had Update to 12.x we have problem to connect to any ftp Server
We have this Problem on two diffrend Plesnikserver.
Both are running under Ubuntu 12.04 ....
Cannot send mail via php mail send
Warning: fsockopen() [function.fsockopen]: unable to connect to localhost:25 in /home/user/public_html/smtpmail/class.smtp.php on line 105
How do I correct this? I'm using Cpanel with php 4.4.8, apache 2.2, mod suphp
Warning: fsockopen() [function.fsockopen]: unable to connect to mail.userdomain.com:25 (Connection timed out) in /home/user/public_html/_inc/class.smtp5.php on line 122
Message could not be sent. Mailer Error: Language string failed to load: connect_host
Using php 5 with phpsuexec enabled.
is to use windows authentication, to connect to the site, and connect to MS SQL with the same user.
I read on the net (http://msdn.microsoft.com/en-us/library/ms998358.aspx), and it said I should go to my default sites properties, to to the "directory security" tab, and make sure "Integrated Windows authentication" is the only box that is checked.
I did that and now I cant connect to my site...
When I try to connect, it bring up a windows user name and password box. I put a user name and password in, but nothing...
Iv double checked the user exist, and still nothing...
I REALLY REALLY need to connect to my FTP on 1and1 and for some reason it seems to be down. Is anyone else having this problem?
View 2 Replies View RelatedThis week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View 11 Replies View RelatedWe can't resolve any outside websites, for example wget won't resolve any websites.
elvis:~# wget [url]
--2009-07-30 03:12:15-- [url]
Resolving g-ecx.images-amazon.com... failed: Temporary failure in name resolution.
wget: unable to resolve host address `g-ecx.images-amazon.com'
elvis:~#
How can we debug this? Its just started to do this, before it was fine for months.
We can resolve IP addresses fine.
elvis:~# wget [url]
--2009-07-30 03:18:08-- http://206.251.77.82/~proxy/images/b...ntent-view.png
Connecting to 206.251.77.82:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 241 [image/png]
Saving to: `background-content-view.png'
100%[======================================>] 241 --.-K/s in 0s
2009-07-30 03:18:08 (63.8 MB/s) - `background-content-view.png' saved [241/241]
elvis:~#
i am searching a VPS to connect Thailand users
its need very fast link and good ping
its for real time multimedia ( i try to avoid LAG in sound)
windows as a preference but linux can do
I dont need a lots of CPU or RAM cpy of 233mhz and ram of 256m is enought
put the connectivity is crucial full dubplex 100mbps and 500G of bandwith as a minimal
any clue where i can find this litle jewel
now i am using one who use tiscali as the provider its works fine the VPS is ok but its dont connect well all my poeples
so i am looking to change it
I'm getting a cabinet colocation with a provider and on the sales order there is a setup and re-occurring fee for "cross connect". My rep explained it's for the connection from my cabinet to their switch. Is this a typical charge for colocation? I thought cross connect is for connecting from their facility to 3rd party providers.
View 13 Replies View RelatedI got my dedicated server on centos ... everything is running, how to remotly connect
I already tried putty but there are some problems. My hosting provider give me this details:
root / Admin Password: xxx
DRAC-ip-user-password
and APC IP.
So which program is the best for remote connect?
how to setup an iPhone to access a mailbox hosted with VPS?
View 0 Replies View Relatedi runnig backup, after runing backup, i can not connect to whm cpanel
show this error:
In order to access the interface, you will need to make sure that the software license on this server is active and installed.
Your license could not be activated because:
Cannot Read License File