I have installed fedora on my computer and now I want to make partion and install windows, and then want to install linux. When I try to boot from windows CD, I am getting blank window. How to reset the monitor resolution?
View 2 Replies
good remote management solution.
As the Intel vPro chip set looks very nice and has all this, what we need (remote power management, hardware analysis/informations, kvm, etc) we bought one main board with that chip set.
We had now the problem to find a software which has a good support for the Intel vPro chip set. We found and tried:
Intel AMT Developer Kit
LANDesk
Microsoft System Configuration Manager 2007
SyAM Software
The onliest software, which was install able and connect able at the moment, was the Intel AMT Developer Kit. Software like LANDesk and MS SysConfigMgr needs Windows Server Versions with and without Windows Domain. We succeeded (after fixing the requirements of each software) to install everything, but no software is able to connect to the vPro chip. Only the Intel AMT Developer Kit does.
The Intel AMT Developer Kit looks on the first look enough anf powerful. We can power on, off, reset, we see hardware informations, we can enter also the bios over remote console. But as soon as we want to start remotely a cd, for example simple memtest86 image, it doesn't gives any display.
Does someone of you has good experience in this system?
Has someone some suggestions, what software else is existing?
We want to manage linux/unix based and windows as well.
With manage we mean, to install and to maintain.
If here is some company, which can help us, also if it costs some money, we would be glad to get in touch.
I have a windows server and i need ffmpeg for converting video to flv and creating thumb of that. I have tried so much but i couldn't install this. I installed msys and mingw but when i running post install script for combining these two, it gives that make.exe file not found. I am also not sure what should be installation path of these two. Where will I upload all ffmpeg files and how can I compile this? Where will I get ffmpeg.dll for using this through php?
View 0 Replies View Relatedi have windows server 2003 and i also have plesk 7.5.... every time i try to install plesk it says thats i need frontpage 2002 or later and url]...i have both but it still says i dont have it
View 3 Replies View RelatedI work for a big organization that has a check list for standard windows server 2003 installation.
The list includes stuff such as , removing some users and adding some domain users, changing system name, windows update, ie7 installation, adding the system to the domain, installing norton anit virus from file shares and so on.
Is there anyway to auto mate this or atleast everything to do with system settings including windows update ? (Minus norton install)
I am sure one can make an answer file but i am not convinced by that answer as the post installation changes require editing regedit and other local security policies.
Anyone succeed in using the PHP installer? I tried on a few machines it just keep failing
View 7 Replies View RelatedI tried to install the above, but I cant seem to be able to find Crypt:Sleary, my client insist it shd be there. What shd I do?
View 2 Replies View RelatedPlesk has mysql installed with it to run properly and I need to upgrade that version to the latest. Now I am not talking about the mysql server that it provides for me to create databases on. I am talking about the version it uses to run.
View 3 Replies View RelatedI have Plesk Panel 11.5 and wanted to install Drupal 7.23 as an application.The installation didn't worked, because it says: "The app requires PHP 5.2.5 or later. Currently, you have PHP none. If the version is "none", ensure that the PHP support is selected for the domain."I checked the server components and it says, that I have installed PHP 5.2.17 and 5.4.15...Also my win 2012 server has 5.4.15.
View 2 Replies View RelatedI am struggling to install Wordpress. When I try I get the Error message:
Error: Installation of WordPress at http://xxx failed. Try to establish connection failed
This appears to be something simple but I don't know what I am doing wrong!
How can I remove all previous web users, even after an uninstall, I am having trouble finishing a new installation, during the wizard because users already exist.
View 15 Replies View RelatedWindows setup: Plesk Panel 11.5 - Server 2012r2 - IIS 8.5 - PHP 5.3/5.4/5.5 - mySQL/MSSQL. Server runs behind firewall (NAT). Setup with local DNS pointing all A records towards public IP.
Situation:
Installed Wordpress through Plesk applications. (mysql). URL....Installs themes in WP console. Everything ok. Installs theme from file, site gets an 500 error. Sometimes installation of theme goes fine, but once activated or previewed it shows 500 error.
Error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.Please contact the server administrator to inform of the time the error occurred and of anything you might have done that may have caused the error.
I'm trying to install worpress manually but I can't get the WP do initiate the installation process.
I give a HTTP 500 error
I have Windows 2012 R2 server.
I was trying to install Plesk on my Windows Server 2012 Standard, but it failed. It says:
" Failed to install 'C:ParallelsInstallerparallelsPANEL-WIN_12.0.18dist-msi-Microsoft-2003-i386plesk-site.msi':"
Error: The installation of the package 'plesk-site' failed with code 1603. (install: installing Parallels Panel WebSite...)
Please contact Support.
I know on windows, you just add a new HDD, right click and select drive mirror, on an already fully operational box.
On Linux I know you can setup software raid during the initial installation.
Is there any way to add mirriroing of any kind on an already installed system?
I've had nothing but issues trying to restore a backup from another plesk installation.Running Plesk 12 on CentOS 6. I installed a php extension which required php 5.4. Yum updated our php version, which broke a couple of our sites. In trying to use yum to remove php 5.4, it also removed several components to plesk.
I then attempted to reinstall plesk and restore our backups from the previous day, but ran into several errors related to the way plesk hashes passwords in backups (as I now had a new key to hash against, they wouldn't work right). I solved that problem by running the fix passwords utility . But now I'm getting the following errors, I suspect the first one is the main problem.
WARNING: (server object '') Execution of /usr/local/psa/bin/sw-engine-pleskrun /usr/local/sb/utils/bru.php --restore --log=stdout --file=/usr/local/psa/PMM/tmp/sb54DVSHeFh.zip --target=server_settings failed with return code 1.
Stderr is
[code]....
I get this error by installing joomla attached...
View 2 Replies View RelatedAfter my HDD crashed, I replaced it and installed Plesk 12.0.18 but not some options are missing from the panel.I'm missing this functionality: Send from domain IP addresses and use domain names in SMTP greeting
Also now after the restoration of the backups in /var/www/vhosts/<DOMAIIN_NAME>/logs/There are no logs, but they are present in /var/www/ vhosts/ system/<DOMAIIN_NAME>/logs/Before they were symlinked to the first directory.all my domains with a dedicated IP are being sent from my main IP, and they are being marked as spam because of SPF.
During the installation procedure, the script stopped unexpectedly
Errors were encountered while processing:
/var/cache/apt/archives/psa-proftpd_1.3.5-ubuntu14.04.build1200140604.16_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ubuntu 10.04.4 LTS
12.0.18 Update #46, last updated at May 15, 2015 03:57 AM
Just recently (after update #46) Fail2Ban stopped working and I couldn't restart it or pin point the reason behind it. I decided to uninstall F2B component via Plesk installer.
F2B uninstalled however when I try to install it again I get error : 'Installation will not continue'
Where to start and where can I find log files that could give me some clues?
Installation of the Plesk VPN extension reproducible fails on Debian Wheezy
Plesk 12.0.18 Update #24
Debian 7.7 Kernel 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
Steps to reproduce:
Plesk Panel > Updates and Upgrades > Install "Plesk VPN extension"
Green Message "All operations with products and components have been successfully completed."
Going back from Upgrade window to Plesk Panel Home
[Code] .....
What I already have tried:
Shell > apt-get install psa-vpn
Getting error mossage:
Setting up psa-vpn (12.0.18-debian7.0.build1200140606.15) ...
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
Shell > modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
if I can install plesk panel with a dedicated database server... and how.
View 3 Replies View RelatedI'm just testing Plesk 12 on CentOs 7 and after installation is succesfully completed, I cant access [URL]
This is the environment and steps which I taken:
* Fresh CentOs 7 iso
* Windows 2008 R2 Hyper-v hypervisor
1) Installation of the CentOs successfully completed
2) Yum update
3) Download auto-installer
4) Run auto-installer
5) process successfully completed
6) NOW I CAN'T access the url ...
yesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS. For this issue I try: [URL] Then: [URL] I changed size of buffering: [URL] And at the end this: [URL] After that I have the same problem only for one domain.
View 5 Replies View RelatedIs it possible, that the script changes my admin password for MySQL? I can not connect to my MySQL Server any more.
View 1 Replies View RelatedInstalling Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
In the Wordpress Toolkit several WP installs appear with exclamation mark and title: "A Wordpress installation was previously detected at this path, but it is not operating properly".
View 1 Replies View Relatedon my Ubuntu 14.04 LTS server, I have ran the install script. This process stopped with the message: ERROR while trying to establish test connection. If you are installing Plesk on an already configured MySQL server, you need to specify the administrator's credentials to succeed with the installation.
To do this, you need to create a file - /root/.my.cnf with the 'client' section where you need to provide user and its password ("user = $admin_name" and "password = $admin_pass").
After installation is finished, the file /root/.my.cnf will be renamed to /root/.my.cnf.bak
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
Accordingly, I have the existing my.conf copied to the ROOT directory and added the two missing lines in the client area. After that I started the plesk-installer.sh again. The process stopped at a line
"Installed product components are determined" and nothing still happend. The log files says nothing but the last information at the previous try.
Yesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS.
For this issue I try: [URL] ....
Then: [URL] ....
I changed size of buffering: [URL] .....
And at the end this: [URL] ....
After that I have the same problem only for one domain.
I am running phpbb 3.0.12 installed from Plesk. In Plesk it is showing me that there is an upgrade available to version 3.1.2-15 however when I Re-Check the version in phpbb it says that I already have the latest version 3.0.12. That's a little weird.
The problem is when I upgrade to 3.1.2-15 in Plesk, it will mess with the whole installation. The forum page will redirect in circles to /install/index.php which doesn't even exist and I can't do anything except revert to before the upgrade.
So my questions are: Why does Plesk show a version 3.1.2-15 but phpbb says the latest one is 3.0.12? How does the upgrade process from Plesk work? I expect it to automatically do everything, or why else would I want to let Plesk upgrade?
Iupdate to plesk 12.0.18
I tried to install open-xchange from application vault.
I got the following error message: Fehler: Die Installation von Open-Xchange ist fehlgeschlagen. Non-zero exit status returned by script. Output stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '. Error stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '.
the following properties I made:
public ox website: http://ox.mydomain.de
ox installation server: myip
