I found out a easy way to update the Database name of a WP installation through phpmyadmin panel, However I can't seem to update or refresh the Parallels WP Settings with correct information. Is this a bug?
This is how to reproduce:
From phpMyAdmin select the database you want to select, in the tabs there's one called Operations, Go to the rename section.
Update the user privileges to the new Database name and remove the old privileges (save) Then manually update the wp-config file which contains the 'Database name' (save) Then goto Parallels Plesk > Websites & Domains> WordPress Installations > Change Settings
Here you should notice the Change Settings for the WordPress Installation still contains the old Database name.
I have a clean installation of Parallels Plesk on my server, and I installed wordpress on two of my domains. I'm scanning for installations through Plesk Admin, and it shows two installations with empty name and the toolkit is not functional at all. Check the attached screenshot.
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE Plesk 11.5, 11.5.30 Update #44, last updated at April 30, 2014 03:25 AM, Centos 6.5 (Final), Linux 64bit
PROBLEM DESCRIPTION When I try to add an extra MySQL server, running on a different server, I always get an error that the user has no admin access. But the user I created does have admin access to the database. The remote database is a MySQL 5.5 on a Linux Ubuntu 12.04 LTS server
STEPS TO REPRODUCE Tools & Settings -> Database Servers -> Add Databases server
ACTUAL RESULT Error: Test connection to the database server has failed because the supplied account does not possess administrative privileges: Access denied for user 'admin'@'%' to database 'd536cedf97037e'
EXPECTED RESULT A working database connection.
ANY ADDITIONAL INFORMATION These queries are logged by MySQL:
i would like to change the access control for datebase users via CL: command: /usr/local/psa/bin/database --update-dbuser web1_presta -server localhost:3306 reply: The database user was successfully updated. examination: mysql> select host, user from mysql.user;
We like to create the mail accounts through php scripts in mywebsite.com website. So we request you to setup the Qmail with Vpopmail server in our server. As we have the following packages are already installed.
2. Courier POP/IMAP
3. Horde Webmail client
providers who install the vpopmail in the our server and configure these four packages to create the mail accounts via php script. So that we can use vaddsuer command in php to create the mail ids and also imap_open commands to access the mails.
We will take the decision sooner since we need to live the website shortly.
When I update servers via CLI autoinstaller, I always (afair) get this mysqldump error message:
Stopping psa... * Stopping Plesk engine pool manager sw-engine-fpm ...done. done -- Warning: Skipping the data of table mysql.event. Specify the --events option explicitly.
mysqldump: Got error: 1049: Unknown database 'atmail' when selecting the database
===> Cumulative APS controller database (apsc) upgrade has been started. ===> Cumulative upgrade of APS controller database has been completed. ===> Cumulative Plesk database upgrade (revertable stage) has been started. ===> Preparing Plesk database upgrade (revertable stage). ===> Cumulative upgrade of Plesk database (revertable stage) has been completed. Reading package lists...
There is no database "atmail" on any of our Plesk servers. Simple solution should be to first check if the DB exists before performing actions on it.As a bonus, perhaps it would be possible to suppress the warning about mysql.event.
I've had nothing but issues trying to restore a backup from another plesk installation.Running Plesk 12 on CentOS 6. I installed a php extension which required php 5.4. Yum updated our php version, which broke a couple of our sites. In trying to use yum to remove php 5.4, it also removed several components to plesk.
I then attempted to reinstall plesk and restore our backups from the previous day, but ran into several errors related to the way plesk hashes passwords in backups (as I now had a new key to hash against, they wouldn't work right). I solved that problem by running the fix passwords utility . But now I'm getting the following errors, I suspect the first one is the main problem.
WARNING: (server object '') Execution of /usr/local/psa/bin/sw-engine-pleskrun /usr/local/sb/utils/bru.php --restore --log=stdout --file=/usr/local/psa/PMM/tmp/sb54DVSHeFh.zip --target=server_settings failed with return code 1. Stderr is
After my HDD crashed, I replaced it and installed Plesk 12.0.18 but not some options are missing from the panel.I'm missing this functionality: Send from domain IP addresses and use domain names in SMTP greeting
Also now after the restoration of the backups in /var/www/vhosts/<DOMAIIN_NAME>/logs/There are no logs, but they are present in /var/www/ vhosts/ system/<DOMAIIN_NAME>/logs/Before they were symlinked to the first directory.all my domains with a dedicated IP are being sent from my main IP, and they are being marked as spam because of SPF.
Plesk Panel > Updates and Upgrades > Install "Plesk VPN extension" Green Message "All operations with products and components have been successfully completed." Going back from Upgrade window to Plesk Panel Home
What I already have tried: Shell > apt-get install psa-vpn
Getting error mossage:
Setting up psa-vpn (12.0.18-debian7.0.build1200140606.15) ... ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
Shell > modprobe tun ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
yesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS. For this issue I try: [URL] Then: [URL] I changed size of buffering: [URL] And at the end this: [URL] After that I have the same problem only for one domain.
Installing Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed. server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use invoke-rc.d: initscript spamassassin, action "restart" failed. dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option) 2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5" run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
on my Ubuntu 14.04 LTS server, I have ran the install script. This process stopped with the message: ERROR while trying to establish test connection. If you are installing Plesk on an already configured MySQL server, you need to specify the administrator's credentials to succeed with the installation.
To do this, you need to create a file - /root/.my.cnf with the 'client' section where you need to provide user and its password ("user = $admin_name" and "password = $admin_pass").
After installation is finished, the file /root/.my.cnf will be renamed to /root/.my.cnf.bak
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
Accordingly, I have the existing my.conf copied to the ROOT directory and added the two missing lines in the client area. After that I started the plesk-installer.sh again. The process stopped at a line
"Installed product components are determined" and nothing still happend. The log files says nothing but the last information at the previous try.
Yesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS.
For this issue I try: [URL] ....
Then: [URL] ....
I changed size of buffering: [URL] .....
And at the end this: [URL] ....
After that I have the same problem only for one domain.
I am running phpbb 3.0.12 installed from Plesk. In Plesk it is showing me that there is an upgrade available to version 3.1.2-15 however when I Re-Check the version in phpbb it says that I already have the latest version 3.0.12. That's a little weird.
The problem is when I upgrade to 3.1.2-15 in Plesk, it will mess with the whole installation. The forum page will redirect in circles to /install/index.php which doesn't even exist and I can't do anything except revert to before the upgrade.
So my questions are: Why does Plesk show a version 3.1.2-15 but phpbb says the latest one is 3.0.12? How does the upgrade process from Plesk work? I expect it to automatically do everything, or why else would I want to let Plesk upgrade?
I tried to install open-xchange from application vault.
I got the following error message: Fehler: Die Installation von Open-Xchange ist fehlgeschlagen. Non-zero exit status returned by script. Output stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '. Error stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '.
the following properties I made: public ox website: http://ox.mydomain.de ox installation server: myip
I have installed the Wordpress application. The wordpress url is "server.com/wordpress", but I want to change it to something like "server.com/myblog".
In Plesk, the installation path cannot be changed (at least, it is not under "Change Settings").
Changing the Wordpress installation itself is not that difficult (renaming the folder in httpdocs and changing the siteurl and home parameter in the database), however, in Plesk still the old installation path is shown, and the Plesk interface to Wordpress obviously does not work any more.
How can I change the Wordpress installation path in Plesk?
Version Parallels Plesk v12.0.18_build1200140606.15 os_Ubuntu 12.04 OS Ubuntu 12.04.5 LTS