I have ffmpeg installed on a webserver. If I enter the command to begin a conversion process, or the command is sent through PHP via exec(), it keeps going until it finishes or runs into an error.
Is there a way to cancel a conversion process after it's been started either through the command line or via PHP exec()?
Prior to installing FFmpeg and its dependencies, I want to know about FFmpeg server-side conversion without the php script. Does it require those php scripts in the first place or I can just run an ssh command?
Also, does this FFmpeg have a configuration file in which you can set the quality of the converted .fla videos?
How about a lossless quality conversion and keeping the size proportion of the video the same?
Meaning, for example, from .avi to .fla without sacrificing/loosing the quality much or noticeably.
I want to do a "near-lossless" video conversion, if that is even possible, in keeping the proportion of the original video. Veoh seems a little bit better / at a higher quality than youtube, and I want to achieve higher quality than that. Literally speaking, I want the converted flv video's quality to be as close as the original video. What ffmpeg command exactly do I need to achieve this? I currently use ClipShare and is experimenting with Ostube for the php script. The default "high-quality" setting for both scripts are not that good of a quality either, with choppy images.
View 4 Replies View RelatedWhen i try to install all those things i am getting error...i am following the things given in below link but i am not to excute this svn command
[url]
The hosting with FFMPEG, FFMPEG-PHP, Xvid, Mp3lame, FLV2Tool Support is necessary.
It was pleasant downtownhost.com,
But cost 4.95 only at payment of 36 months! It is a lot of ((
There are similar variants?
how to translate this into what would be needed in port speed to cover this server if converted to colo, in Mbps ? Is it 4.5?
--------------------------------------------------------------------------------
The statistics were last updated Wednesday, 14 February 2007 at 10:50,
at which time 'XXXXXXXXX' had been up for 362 days, 17:47:15.
Last 30 days usage (Metered 95%): 4670.57 kb/sec
Last 30 days usage (Metered 95%): 1477797.53 MBytes
Total Utilization ( Last 30 days ): [In 637187 MBytes] [Out 65140 MBytes]
Max Speed: 12.5 MBytes/s
---------------------------------------------------------------------------------
Also, is there a real need to be on a burstable connection, or are flat rates OK most of the time? Just looking for the advantages and disadvantages of it.
Nirvanix offers "Image manipulation such as image resizing, thumbnail generation, and rotating, video frame extraction, video conversion to Flash video". Is there any competitor? I guess building one on top of S3/EC2/SQS from Amazon would be a no brainer.
View 5 Replies View Relatedto create an .htaccess rewrite so that all urls in a given directory have their files rewritten so that the %20 spaces are converted to dashes. I'd also like to convert my upper case words to lower case, to stay consistent with other conventions we use in the url.
/directory/Example%20Link.aspx
to
/directory/example-link.aspx
A dynamic php+mySQL site was converted to a static html by mirroring (wget). The result was that each page became an html file named some-page.html
View 4 Replies View RelatedI am using the plesk 12 (Web Host Edition) with admin account. I need to configure file sharing in the plesk.
I referred this LINK
I filled up all required field in File Sharing Settings and Click "OK" button.
This error message,
(Error: Failed to perform IDN conversion from UTF-8 name '0') is shown.
I would like to know if there's any way we could reduce "conversion times" for videos while converting them with "mencoder" and "x264 codec"?
Is it possible to cluster 2-3 or more servers (Quad core/8GB RAM) so that I can reduce the conversion timings effectively?
The original video sizes are around 500-700MB on an average and I'd like to convert them using mencoder in x264 codec @ 500Kbps bitrate and 2pass settings.
Ofcourse it'll take atleast 1-2hours to encode 1 such video at these settings on a 'single' such server, so is there a way to reduce the conversion times to around 10-15minutes/video by using "parallel encoding" with x264 codec?P.S: I know how to form a cluster, using beowulf/rocks, etc...what I need help with is 'using' the cluster with x264 codec
I have WHM 11.1.0 cPanel 11.2.1-C11635
FEDORA 4 i686 - WHM X v3.1.0
PHP Version 4.4.4
I'm not sure what my apache version is.
I want to try this:
http://www.webhostgear.com/232_print.html
It says it's for Apache 1.3x, PHP 4.3x
Will that work on my server? Will it be safe to try?
Currently my site is having a extreme surge in traffic (in and out). My webhost just sent me a warning, saying that my site is generating abusive traffic to the host's network.
Code:
Please be aware that abusive traffic is being generated from your IP, xx.xxx.xx.xxx, directed to our network as seen in the logs below. We have added a Nullroute for this IP on our network for a period up to 24-hours. Please take action to remove and prevent this abusive traffic from being generated. Repeated offenses will result in a permanent Nullroute of your entire network block.
2007-07-05 09:59:51 - sensor-ds04.tpa.sagonet.net - sshd[13496]: Did not receive identification string from ::ffff:xx.xxx.xx.xxx
2007-07-05 09:59:51 - unknown.sagonet.net - sshd: refused connect from ::ffff:xx.xxx.xx.xxx (::ffff:xx.xxx.xx.xxx)
2007-07-05 09:59:51 - spamassassin-lbb.tpa.sagonet.net - sshd[24910]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin-lba.tpa.sagonet.net - sshd[32041]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin-lbb.tpa.sagonet.net - sshd[24911]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin06.cust.sagonet.com - sshd[12792]: refused connect from ::ffff:xx.xxx.xx.xxx (::ffff:xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:52 - sensor-ar01.tpa.sagonet.net - sshd[12730]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
My VPS is using Plesk v8.01 as the control panel. I have purchased my own 3 IPs so I'm sure this is not the case of sharing the same IP with another account.
I've checked the cgi-bin directory but there is nothing there except the usual default file (test.cgi). And I never have the right to alter the cgi-bin directory (can't remove, can't add files).
The traffic surge costs me 10 GB (in) and 5 GB (out) bandwidth a day as opposed to the normal 100~200 MB a day. I haven't ask them the exact form of the abuse. So far, I think my IP has becoming the source of abusive traffic that burdens THEIR server.
I've checked the latest access.log and everything looks normal.
But when I checked using menu Virtuozzo/Traffic Statistics, I can see that the incoming and outgoing traffic are surging up unnaturally (this is the third day).
Hour/Incoming/Outgoing (in MB):
Code:
01 5.61 26.31
02 4.94 25.11
03 6.77 33.48
04 10.42 47.17
05 91.43 94.06
06 289.51 196.99
07 309.13 200.02
08 51.78 33.33
Has anyone had any good results using spamassasin? If so, how did you go about setting it up? I was hoping someone would share some real world settings that work.
View 10 Replies View RelatedCan you control SPAM on a server ? I've got this email account that all receives is SPAM, nothing else. I'd like to eliminate this so it doesn't get any more SPAM.
View 13 Replies View RelatedI have CSF on my server (configserver security and firewall) and it blocks the IP when my server gets attacked, but it always seems to be a little too late... Apache goes down, even though the IP is blocked. I end up running:
iptables -I INPUT -s xx.xx.xx.xx -j DROP
service httpd restart
And that tends to sort things out... but the thing is, sometimes they still manage to attack and even though csf sends me messages explaining how it is connecting, I can check the "deny IPs" and the ip shows as blocked...
What other software is there (eg. mod_evasive... but how can I install it...) that I can run without harming my server, causing problems with CSF or any problems for that matter and how can I install it?
I designed one of my web services so that 'nobody' has to put commands to cron. Unfortunately this thing stops to work from time to time because "someone" is putting 'nobody' back to cron.deny file.
How to stop that?
Apache keeps stopping. MULTIPLE times per day! There is no logic to when it dies. But about every 2 hours.
Load stays below .30 and there is free memory available.
This is on a VPS machine. None of the other VPS's are having an issue. Just this one.
Centos release 5.3 (Final)
Apache/2.2.3
Here is what is in the httpd.conf file. I realize the numbers are way too high, but just trying to get this issue to go away.
Code:
<IfModule prefork.c>
StartServers 100
MinSpareServers 100
MaxSpareServers 100
ServerLimit 512
MaxClients 512
MaxRequestsPerChild 4000
</IfModule>
<IfModule worker.c>
StartServers 100
MaxClients 500
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 100
</IfModule>
Here is what is in the /var/log/httpd/error_log file before it dies:
Code:
[Wed Jul 01 18:06:32 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 98 idle, and 108 total children
[Wed Jul 01 18:08:17 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 74 idle, and 76 total children
[Wed Jul 01 18:08:18 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 16 children, there are 63 idle, and 63 total children
[Wed Jul 01 18:08:19 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 79 idle, and 79 total children
[Wed Jul 01 18:11:36 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 93 idle, and 108 total children
Is there a script or program which I can use to start my game servers remotely? I am giving my friend a free game server, but the problem is that he wants the power to start/stop the server because he wants to update the binaries. I am not looking for a game server control panel, but more like a small script or program that has the power to start/stop the server. The game server I am hosting for him is Team Fortress 2. Also, it has to be free since I am not going to make any profit of this.
Game - Team Fortress 2
OS - Windows 2003 Server
Web hosting - WAMP
I will move my vbulletin site from one server to another server.
my web data is more than 10G including mysql data, I know I may stop the vbulletin at first and move data. but I am expecting a minimal forum-stop time or no forum-stop time.
My concern is, if I don't stop the vbulletin at first, after I dump sql data out and retore them to the new server, it would be more than 3-4 hours, there must be some new data come in during that period. how may I keep the vbulletin running and move all data to new server?
We're currently testing Postini after checking with Message Labs, etc and it seemed that Postini was the most highly recommended out of all of them. We shall see, as there does seem to be ALOT that get past their filters with spam level filtering set at their most sensative level.
However, what could I do for accounts with Hosting Firms. We have a couple on Pair, and while they use SA, their filters doesn't seem to be really effective at all. Users can come in over the weekend, and have 5 valid emails out of 200 junk......
BTW, has anyone used any of the spam appliances out there lately.
We tested them about 1.5 years back and none were really effective
I am trying to run backups to an off site location, however, I have noticed that even if I try on the server side, it will only backup 2gb, which when I check the backup, the file structure is there, but there arent any files in the backups.
View 8 Replies View RelatedI saw some spams and I try to remove them on my cPanel server from WHM > Mail Queue
Message 1MFr0q-0001cK-TV is locked
Message 1MGJLb-0001UL-4y is locked
Message 1MGIqC-00036q-7v is locked
Message 1MGIvk-00044Q-5r is locked
Message 1MGJpk-0003fU-5K is locked
Message 1MGJK9-00015D-US is locked
Message 1MGJhL-00006a-Mh is locked
Message 1MGHK4-0004e6-60 is locked
Message 1MFrD4-0002Up-OX is locked
I can't seem to remove them. What's the way to kill them at once?
We have a VPS Server from one of the most reputable VPS Provider. We have 384 Guaranteed RAM and 1GB Burst. We have Dual Core AMD Opteron(tm) Processor 265 - 1795.503 MHz with 1024 KB cached allocated to our VPS.
It is only hosting 2 average forums (10-15 concurrent users in total) and 30 small websites, low traffic websites.
The problem we are having is, almost 3 times a week, the cPanel, named and apache services keeps stopping. I am monitoring our server when this is happen and prior to the event its only using about 300MB RAM and low CPU..
What could be causing this problem? Do I need to upgrade our RAM?
PRODUCT, Plesk for Windows VERSION 11.5 latest update VERSION OF MICROUPDATE 11.5.30 Actualizar #39, OPERATING SYSTEM Windows 2008 Server Suddently with no apparent reason, MYSQL stops and Ihave to go to the panel and restart it.
Every Morning I have to restart MySQL thru the control panel in remote console of windows..Works all day long, and then stops at night..Should work as always did, for several months I did not even reboot the server, no I have to reboot the server to see if that fixes the problem. Latest windows update, latest Plesk for windows update, but I have the feeling that with the latest microupdate something has broken,
Plesk 11.5 Lunix
Centos 5.6
I am having problem sending email. Email from others came in but when sent from the server it does not arrived.
SMTP Server (Postfix) keep stopping...
I had is running it on my php4.. I upgraded to php5 using easyapache but now its not working.. Its has the ffmpeg.So in the extenuion folder and php.ini has the extension folder and the extension defined.. Any solution
View 5 Replies View RelatedI've been trying to download FFMPEG via SVN for several hours now but I am getting are just timeouts. Can you please try it on your side: ....
View 3 Replies View Relatedi am coverting am mp3 and want to set the author tag in it..
View 4 Replies View Related