Plesk 11.5 Lunix
Centos 5.6
I am having problem sending email. Email from others came in but when sent from the server it does not arrived.
SMTP Server (Postfix) keep stopping...
I've a problem with a server with Postfix. Emails (smtp) are refused by an operator because there is too many mail sent in a few moment.
With Qmail, we make this config :
1) we create file concurrencyremote
# vi /var/qmail/control/concurrencyremote
with the value 3
2) we restart Qmail and it's ok
With Postfix, we make that :
1) we modify the file /etc/postfix/main.cf
default_destination_concurrency_limit = 3
2) In /etc/postfix/transport :
wanadoo.com slow ;
wanadoo.fr slow ;
orange.fr slow ;
orange.com slow ;
laposte.net slow ;
.wanadoo.com slow ;
.wanadoo.fr slow ;
.orange.fr slow ;
.orange.com slow ;
3) After :
#postmap /etc/postfix/transport
4) In /etc/postfix/master.cf :
slow unix - - n - 5 smtp -o syslog_name=postfix-slow -o smtp_destination_concurrency_limit=3 -o slow_destination_rate_delay=1
5) In /etc/postfix/main.cf :
slow_destination_recipient_limit = 20
slow_destination_concurrency_limit = 3
And we modify :
transport_maps = hash:/var/spool/postfix/plesk/transport, hash:/etc/postfix/transport
6) At the end :
# /etc/init.d/postfix reload
But it doesn't work. Operator "Orange" refused emails.
In maillog, we have :
dsn=4.3.0, status=deferred (mail transport unavailable)
The problem is, can not send mail via SMTP using popular scripts Opencart, SMF, Osclass. The problem was lapping Plesk 11.5 via 587 port. That was timeout connection or authorization error with the correct settings. Mail may be sent, sometimes not. No longer working than working. At the same time when working with e-mail clients(example, The Bat) work fine. In Plesk 12 same problem. Port 465 - e-mail clients(example, The Bat) work fine. But can not send mail via SMTP using popular scripts Opencart, SMF, Osclass. When using Cpanel with Exim - all work perfect. But the Plesk e-mail with Postfix - constant problems.
View 4 Replies View RelatedI have a new Plesk 11.0.9. #34 server with Centos 6.3 64bit.
I made a few changes in order to be PCI Compliant.
I created a domain and try to send email with no luck.
----------Maillog------------
Jan 24 16:01:28 server7 pop3d-ssl: Connection, ip=[::ffff:X.X.X.X]
Jan 24 16:01:34 server7 pop3d-ssl: IMAP connect from @ [::ffff:X.X.X.X]ERR: LOGIN FAILED, ip=[::ffff:X.X.X.X]
Jan 24 16:01:34 server7 pop3d-ssl: Unexpected SSL connection shutdown.
Jan 24 16:01:48 server7 pop3d-ssl: Connection, ip=[::ffff:X.X.X.X]
[Code] ....
As you can see from the logs, the pop/imap connection is successful. I login to webmail with the username/password successfully. I can't send from Outlook/thunderbird etc.
Tried to rebuild emails with /usr/local/psa/admin/sbin/mchk --with-spam but no luck.
After setting up a new server on Plesk12, I successfully ran some test mail outs using phpmailer using the SMTP server on this machine
However, there was an issue in creating new local mail accounts in plesk with an error message each time.
Investigating this issue led me to a solution that I should run mail_restore from the Plesk scripts
This cured the problem of setting up new local accounts but outgoing SMTP mail is always failing with 'relay access denied'.
My issue started ince a couple of months seemed to increase with update to Plesk 12.0 (though I can't guarantee it).I am using Centos 6.5, all updated. What happens is that postfix usage starts to increase without any apparent reason (during week-ends for example). Then postfix is not responding anymore.
Code:
top - 13:27:13 up 3 days, 18:44, 0 users, load average: 0.73, 0.33, 0.32
Tasks: 238 total, 2 running, 236 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.6%sy, 0.1%ni, 98.7%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 32917292k total, 8982212k used, 23935080k free, 1899416k buffers
Swap: 1046520k total, 0k used, 1046520k free, 4905884k cached
[code]....
I am trying to run backups to an off site location, however, I have noticed that even if I try on the server side, it will only backup 2gb, which when I check the backup, the file structure is there, but there arent any files in the backups.
View 8 Replies View RelatedSomebody is sending spam from my postfix server.
How can I locate the domain causing the problem?
actually i want to know is this sending this email by my smtp server?
Feb 23 14:49:36 nsxxxxxx /var/qmail/bin/relaylock[9836]: /var/qmail/bin/relaylock: mail from 187.5.81.179:51251 (187-5-81-179.bsaco701.dsl.brasiltelecom.net.br)
Feb 23 14:49:37 nsxxxxxx qmail-queue-handlers[9838]: Handlers Filter before-queue for qmail started ...
Feb 23 14:49:37 nsxxxxxx qmail-queue-handlers[9838]: from=Frederick59c@brasiltelecom.net.br
Feb 23 14:49:37 nsxxxxxx qmail-queue-handlers[9838]: to=info@xxxxxxxxxx.be
Feb 23 14:49:37 nsxxxxxx qmail-queue-handlers[9838]: handlers_stderr: SKIP
[code]....
I have been trying to determine if I should use Postfix or Exim for our new SMTP gateway. My biggest obstacle is in trying to determine if Postfix can handle the processing as efficiently as Exim.
Basically we have hundreds of domains that will have email going through the gateway. I need to know if Postfix can be configured to perform different actions based on the recipient domain (i.e. block receipt of message or add a header and deliver). It looks like this functionality is handled by using a 3rd party tool like "amavisd".
The problem is that it looks like I have to wait for the DATA to be received before I can send the mail to the filtering tool rather than just waiting until the last RCPT command. It is also unclear as to whether the message will be denied during delivery with a 550 error being returned or whether the message is accepted and a postmaster message is sent. Obviously I would prefer the 550 error.
I would like each of my clients who have a dedicated IP address and an SSL certificate to be able to use their own domain name (and own certificate) when sending mail on ports 465 or 587. I have managed to change the default certificate used by Postfix to my own server's certificate, but I want users to use their OWN IP address and SSL certificate when sending, so this is not an option.
I have been able to update Dovecot to use a specific certificate for each IP address, but I can't seem to update Postfix. I was trying to follow these instructions but my postfix master.cf was quite different than the poster's file and I didn't succeed: [URL] ....
I know many people will simply say "it can't be done" or "just get the users to use the shared IP address", but I know there must be some workaround to make this work, even if it means manually updating the config file after every Plesk update. I'm even prepared (if possible) to have Plesk abandon management of Postfix and have me manage it manually, if that's even an option.
I can't send any mail from the server. I don't get any log information about errors. Postfix is installed on opensuse 13.1.
View 3 Replies View RelatedEach migration in the last years I'm running into this bug that Postfix wants to run on port 587 even though this is turned OFF in the Plesk Panel.
Sometimes it does this after some update.
Because another process is running on port 587 this means that postfix does not start and I have some downtime until I "repair" this.
"Repairing" means going into Plesk panel and turning ON SMTP-Auth.... Wait a moment for it to apply and then turning it OFF again....
This unwanted behaviour can be easily reproduced by having this option turned off in the Plesk panel and then running /usr/local/psa/admin/sbin/mchk --without-spam
This will end up in a non-running postfix if another process is already running on port 587.
This shouldn't be happening. Especially because I reported this behaviour years ago..
on a fresh debian 7 64bit openvz system we actually have a problem with the new plesk 12 feature of limiting outgoing mails.We migrated about 25 systems to plesk, this is the first that makes problems.If limiting outgoing mails is activated (i double-checked all possible checkboxes in plesk) a fresh mailbox gives us the following error while trying to send via smtp:
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: connect from unknown[XX.XX.XX.XX]
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: E9AF61C58851: client=unknown[XX.XX.XX.XX], sasl_method=PLAIN, sasl_username=XX@XXX.XX
Aug 15 13:09:32 2d4 greylisting filter[8651]: Starting greylisting filter...
Aug 15 13:09:32 2d4 /usr/lib/plesk-9.0/psa-pc-remote[8611]: handlers_stderr: SKIP
[code]....
After deactivating the feature all mail is sent without any problems. We use postfix + dovecot.
There are several big domains that frequently defer accepting mail from us causing long delays or rejections. Google, AOL, and Yahoo are examples. I'm considering trying the suggestions found in this online posting regarding rate limiting the sending of messages to those domains. In the below URL, please see the section titled "Different policies for different domains"...URL....
Would these changes be safe to make on a CentOS 6.4 server running Plesk 11.0.9 with Postfix 2.8.4? Would any special modifications for Plesk be necessary?
At this moment, all mail (no matter what domain) goes out straight to its destination. We want to send the mail trough a antispam firewall before it enters the internet.
What setting to change?
Reset postfix configuration in plesk 12? I have some misconfiguration on smtp banner and hostname so I prefer to reset all.
View 6 Replies View RelatedI am unable to switch from qmail to postfix via the control panel. It opens a new window that just hangs and never loads. While waiting for it to load, I see these 2 processes running..
root 25108 0.1 0.0 133972 20604 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser
root 25109 0.0 0.0 104952 3032 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser
But after waiting 20 minutes, the browser never loaded and the two proceses remain. So I killed both processes and removed /tmp/psa-installer.lock and started again. The same thing happened.
Is there a way to fix this? If not, is there an easy way to switch MTAs from the command line?
I just upgraded my Plesk 11.5 on Plesk version: 12.0.18 Update #9 , and after the upgrade the Postfix stop working. And forwarding, receiving is not working at all and I am getting message bellow.
OS: CentOS 6.5 (Final)
Plesk version: 12.0.18 Update #9
This is the mail system at host nsXXXXX.ovh.net.You can delete your own text from the attached returned message. mail system
<xyz@gmail.com>: Command rejected
Final-Recipient: rfc822; xyz@gmail.com
Action: failed
Status: 5.7.1
Diagnostic-Code: X-Postfix; Command rejected
after reinstalling the mta / postfix / smtp (because I couldn't send mails) my plesk is crashed.
I wanted to log in as admin but it doesn't accept my PW. Now with root and then it wants me to accept the license.
Now I copy all my /var/www/vhosts/ maybe when I do the setup steps in plesk it will overwrite all my website content... I hope not all plesk settings are away.
Why I pay every month money for a license? The trouble and work I have with Plesk..
I've been trying to set up Postfix to send email for the past few days. I've managed to get it to ask for a username and password, in order to try and send mail to an external domain
I can receive email fine on the server, but I can't send email out
Here is my main.cf file
Code:
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
unknown_local_recipient_reject_code = 550
mynetworks = 127.0.0.0/8 192.168.3.0/24
smtpd_recipient_restrictions = permit_mynetworks permit_inet_interfaces permit_sasl_authenticated reject_unauth_destination
mynetworks_style = class
smtpd_sasl_auth_enable = yes
allow_untrusted_routing = yes
relay_domains =
smtpd_client_restrictions = permit_mynetworks permit_inet_interfaces
smtpd_sasl_application_name = smtpd
smtpd_sasl_local_domain = $mydomain
smtp_sasl_mechanism_filter = !plain, static:rest
broken_sasl_auth_clients = yes
smtp_sasl_mechanism_filter = login
myorigin = literatifoundation.org
mydomain = literatifoundation.org
myhostname = literatifoundation.org
mydestination = $myhostname, localhost.$mydomain, $mydomain
When I try to login to send the email, it doesn't accept the password.
My server is Plesk 12 with Postfix and Courier IMAP i am also using Thunderbird as mail client...
My question is when i create a folder from my mail client or webmail they just appear as sub folders of my inbox which is not what i want, i want root level folders not to be under inbox... When i searched for this i found [URL] ....
Is this still the case? Is there anything i can do to have root level folders?
I have a hard problem with my VPS. I have postfix as mail server on plesk 12 under ubuntu 12.
I dont know why the outgoing mails of all my domains in my servers are getting spam in servers like gmail, yahoo, hotmail...
I'm using mxtoolbox to fix errors and warnings and finally fixed all of them, but my mails are still outgoing to spam.
In mxtoolbox actually I have no mail server errors / warning, u can see it with, for example, this one of my domains: [URL] ....
Headers:
This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community.
[Code] ....
Our partition become full and drop the vps, after that we are unable to start postifx, actually postfix start but master not.
So if I run :
/etc/init.d/postfix restart
Shutting down postfix: [FAILED]
Starting postfix: [ OK ]
/etc/init.d/postfix status
master is stopped
I already try to reconfigure all
/usr/local/psa/admin/bin/mailmng-service --start-service --mail-component=all
Into ToolsSettings i change between qmail and come back again to postfix (reinstalling)...
I have a brandnew server with CENTOS 6.5 Final with Plesk 12.
For some reason unknown i'm not able to configure Postfix as smtp server and accept plain text autentication. It only accept TLS autentication both on port 25 or 587. If i install Qmail everything works without any problem.
There my configuration files.
(Main.cf)
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
[Code].....
Mail isn't leaving the queue, it's returning this error
Feb 12 23:12:01 XXXX postfix-local[64360]: System error .qmail: Permission denied
Feb 12 23:12:01 XXXX postfix-local[64360]: Wrong permissions for .qmail
All the files within /var/qmail/ are set to the user and group "popuser", and have the nessacery rwx permissions for the user/group.
The OS is CentOS.
I want to put custom values in /etc/postfix/main.cf, but I'm afraid plesk would overwrite them during upgrade. How can I safely add custom values to main.cf and preserve them duing plesk updates?
View 1 Replies View RelatedMy environment: Parallels Plesk v12.0.18_build1200140606.15 os_Debian 7.0 64bits - postfix
In documentation about Server-wide-mail settings
In Plesk for Linux with the Postfix mail server, you can change the IP address used for sending mail. Also, if your server sends mail from domain IP addresses, you can specify which name will be used as a host name in SMTP greetings.
Choose from the three options:
◦Send from domain IP addresses. By default, mail from each domain is sent using the domain's IP address. The host name used in SMTP greeting is defined by the configuration of the mail server.
◦Send from domain IP addresses and use domain names in SMTP greeting. If selected, Plesk changes the mail server configuration so that the SMTP greeting will contain the name of the domain from which an email message is sent.
This option prevent the sender's IP address from being put into public black lists, such as the Spamhaus or OpenBL lists. This might happen if the mail server host name is used in SMTP greeting for the messages sent from domain IP addresses. Some recipient servers consider such messages as spam.
We recommend that you use this option if you host less than 100 domains. In case of a large number of domains, using this option significantly increases the load on the server.
◦Send from the specified IP address. You might want to use certain IPv4 and IPv6 addresses for all outgoing mail.
Sending all mail from the specified address might be useful, for example, if the IP address of the mail server was put into public black lists, such as the Spamhaus or OpenBL lists. If you select None, outgoing mail will not be sent.Click to expand...
Is it possible to get Plesk working with different bounce message templates? I'd like to make messages in my Polish language to make people know what the bounce problem is. How can I make plesk not to overwrite the main.cf and bounce directive ?
View 2 Replies View RelatedUbuntu 14.04 with Plesk 12 (10 Domain License).Using this for mail only... multiple domains.Postfix and Dovecot installed. Trying to figure out how to do:
- SASL Auth (Dovecot)
- TLS
- want above two to be mandatory... no plain text auth and no unencrypted connections.
How do I achieve this with Plesk 12?I have found countless how-to's about doing this with Vanilla (non Plesk) installs with the same server software. However, Postfix main.cf and master.cf both appear to have specific Plesk modificatuons. Same thing for the related Dovecot conf files... also have Plesk specific modifications.
I see no way to enable the desired settings from the Plesk Panel. Can't achieve this within the Panel but also can't modify the conf files without potentially breaking some Plesk-specific functionality? My original hope in purchasing the Plesk license was to make administration of the mail server easier. Unfortunately, I'm struggling to do this now and may have already had this figured out had I not bothered with the Panel.