Apache Keeps Stopping. MULTIPLE Times Per Day!
Jul 1, 2009
Apache keeps stopping. MULTIPLE times per day! There is no logic to when it dies. But about every 2 hours.
Load stays below .30 and there is free memory available.
This is on a VPS machine. None of the other VPS's are having an issue. Just this one.
Centos release 5.3 (Final)
Apache/2.2.3
Here is what is in the httpd.conf file. I realize the numbers are way too high, but just trying to get this issue to go away.
Code:
<IfModule prefork.c>
StartServers 100
MinSpareServers 100
MaxSpareServers 100
ServerLimit 512
MaxClients 512
MaxRequestsPerChild 4000
</IfModule>
<IfModule worker.c>
StartServers 100
MaxClients 500
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 100
</IfModule>
Here is what is in the /var/log/httpd/error_log file before it dies:
Code:
[Wed Jul 01 18:06:32 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 98 idle, and 108 total children
[Wed Jul 01 18:08:17 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 74 idle, and 76 total children
[Wed Jul 01 18:08:18 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 16 children, there are 63 idle, and 63 total children
[Wed Jul 01 18:08:19 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 79 idle, and 79 total children
[Wed Jul 01 18:11:36 2009] [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 8 children, there are 93 idle, and 108 total children
View 5 Replies
ADVERTISEMENT
Apr 21, 2015
when I had multiple (at least 5) vhosts set to Apache when it just hanged, this was fixed adding:
Code:
Acceptfilter http none
Acceptfilter https none
To my httpd.conf, but now it's not hanging, it just times out, I get no error, nothing in the error.log file, it just times out.
After doing a refresh, it comes back like nothing happened.
View 13 Replies
View Related
Dec 12, 2008
How can I restart a SUSE server multiple times?
how to use Cron to restart the server every 5 minutes and then log the number of times this was done and output it to a file?
View 0 Replies
View Related
Nov 9, 2012
Depending on where u are at on my site (documents pages, training, main root, etc.) will depend on which type of background, footer, header and the like you'll get. Now I was thinking. Is there a way to have multiple error messages for more then one page depending on where you are at on a site? Right now it's intranet site and a modded snitz forum. What is the code and were does it go and in which apache conf file(s) does it go in?
View 1 Replies
View Related
Nov 13, 2008
Apache service auto restart many times ( every minute ).
View 10 Replies
View Related
Oct 21, 2007
New VPS, CentOS 4.5, Apache 2.0.52, Plesk 8.2.
Every request is getting processed 3 times. In other words, if I point my browser to the URL of an image hosted on this server, it generates 3 lines in the access log each time I refresh the page.
If I point it to a script which logs something to a file, it logs it 3 times, showing it's run all 3 times.
I haven't touched the httpd.conf or any other configuration. Any idea what could cause this?
View 4 Replies
View Related
Jul 8, 2007
Can i run multiple sites on apache? and if so how do i do it.
View 3 Replies
View Related
Jul 16, 2015
Our servers has been updated recently and my site is not working properly. It was working before the server change. When I click on the links, it doesn't update correctly, instead it gets the last cached data. I have to refresh each link for it to update which shouldn't be the case. I'm a front-end and have no access to servers. Could this be server-related?
View 1 Replies
View Related
May 2, 2013
I wanted to configure 2 clusters on Apache 2.4. Here are my sample configurations
Cluster 1 config:
----------------
<VirtualHost *:80>
ServerName mywebsite1.com
<IfModule mod_proxy_balancer.c>
<Proxy balancer://sgcluster>
BalancerMember http://IPaddress1:80/ loadfactor=1
BalancerMember http://IPaddress2:80/ loadfactor=2
ProxySet lbmethod=byrequests
[Code] ....
I've included both configuration file in httpd.conf. I'm getting the errors, when I tried to start up the apache.
[Thu May 02 11:01:34.243583 2013] [slotmem_shm:debug] [pid 9240606:tid 1] mod_slotmem_shm.c(448): AH02301: attach looking for /opt/apache2/logs/slo
tmem-shm-mod_heartmonitor.shm
[Thu May 02 11:01:34.243667 2013] [lbmethod_heartbeat:notice] [pid 9240606:tid 1] AH02282: No slotmem from mod_heartmonitor
[Code] .....
View 2 Replies
View Related
Jan 23, 2014
How do I add multiple web pages to my server?
View 6 Replies
View Related
Mar 7, 2014
I very much like the "readme.txt" that Apache appends to the directory listings. That is, when a browser GETs a directory, the text in that file is put underneath the list of files therein.
View 1 Replies
View Related
May 13, 2007
I have WHM 11.1.0 cPanel 11.2.1-C11635
FEDORA 4 i686 - WHM X v3.1.0
PHP Version 4.4.4
I'm not sure what my apache version is.
I want to try this:
http://www.webhostgear.com/232_print.html
It says it's for Apache 1.3x, PHP 4.3x
Will that work on my server? Will it be safe to try?
View 8 Replies
View Related
Jul 6, 2007
Currently my site is having a extreme surge in traffic (in and out). My webhost just sent me a warning, saying that my site is generating abusive traffic to the host's network.
Code:
Please be aware that abusive traffic is being generated from your IP, xx.xxx.xx.xxx, directed to our network as seen in the logs below. We have added a Nullroute for this IP on our network for a period up to 24-hours. Please take action to remove and prevent this abusive traffic from being generated. Repeated offenses will result in a permanent Nullroute of your entire network block.
2007-07-05 09:59:51 - sensor-ds04.tpa.sagonet.net - sshd[13496]: Did not receive identification string from ::ffff:xx.xxx.xx.xxx
2007-07-05 09:59:51 - unknown.sagonet.net - sshd: refused connect from ::ffff:xx.xxx.xx.xxx (::ffff:xx.xxx.xx.xxx)
2007-07-05 09:59:51 - spamassassin-lbb.tpa.sagonet.net - sshd[24910]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin-lba.tpa.sagonet.net - sshd[32041]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin-lbb.tpa.sagonet.net - sshd[24911]: Did not receive identification string from xx.xxx.xx.xxx
2007-07-05 09:59:51 - spamassassin06.cust.sagonet.com - sshd[12792]: refused connect from ::ffff:xx.xxx.xx.xxx (::ffff:xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:49 - sensor-ds06.tpa.sagonet.net - kernel: Jul 5 09:59:49 sensor-ds06 sshd[99600]: refused connect from xx.xxx.xx.xxx (xx.xxx.xx.xxx)
2007-07-05 09:59:52 - sensor-ar01.tpa.sagonet.net - sshd[12730]: warning: /etc/hosts.allow, line 1: host name/address mismatch: xx.xxx.xx.xxx != thtdomains.com
My VPS is using Plesk v8.01 as the control panel. I have purchased my own 3 IPs so I'm sure this is not the case of sharing the same IP with another account.
I've checked the cgi-bin directory but there is nothing there except the usual default file (test.cgi). And I never have the right to alter the cgi-bin directory (can't remove, can't add files).
The traffic surge costs me 10 GB (in) and 5 GB (out) bandwidth a day as opposed to the normal 100~200 MB a day. I haven't ask them the exact form of the abuse. So far, I think my IP has becoming the source of abusive traffic that burdens THEIR server.
I've checked the latest access.log and everything looks normal.
But when I checked using menu Virtuozzo/Traffic Statistics, I can see that the incoming and outgoing traffic are surging up unnaturally (this is the third day).
Hour/Incoming/Outgoing (in MB):
Code:
01 5.61 26.31
02 4.94 25.11
03 6.77 33.48
04 10.42 47.17
05 91.43 94.06
06 289.51 196.99
07 309.13 200.02
08 51.78 33.33
View 2 Replies
View Related
Apr 2, 2015
I am completely new to apache and I had the load balancer set up for a single domain that was working perfectly fine, but when it came to multiple domains i couldn't, for the life of me, figure out what to do.
There is example.com sub.example.com and otherexample.com
I had a single node set up for this but I want to experiment with the balancer. I have scratched Google and I only found broken info which couldn't explain much to me. Here are my domains
<VirtualHost *:80>
DocumentRoot "/var/www/domain.com"
ServerName domain.com
</VirtualHost>
[Code] ....
Any example configuration of the default file.
View 1 Replies
View Related
Jun 16, 2014
I inherited an Apache HTTP instance from a colleague. That's why I'm not deep into that stuff. My current scenario is the following: We are running several backend instances which are published to the internet via Apache HTTP Server which is configured as Reverse Proxy (RP). In the past there was only one port and one protocol to handle by the Apache HTTP (RP).
Now I have the following need. There has to be published a Web Service from one instance using two Ports with two protocols (HTTP and HTTPs). I'm not sure how to solve that need.
A solution I tried already was to change and add the variable DEF_BACKEND_PORT to DEF_BACKEND_PORT_1 and DEF_BACKEND_PORT_2 but it didn't worked.
View 2 Replies
View Related
Jun 25, 2015
I must say that I tried a lot of possibilities but my knowledgment in Apache WS is not too much advanced.
Apache Web Server version: 2.2.22
OS: Centos 6 64 bits
Tomcat version: 7.0.57
What I need to achieve is the following:
I have some plain websites defined this way:
<VirtualHost *:80>
ServerAdmin example1@example1.com
DocumentRoot "/opt/sites/example1/"
ServerName example1.com
ErrorLog logs/example1-error_log
CustomLog logs/example1-access_log common
RedirectMatch permanent ^/(.*) http://www.example1.com/$1
[Code] ....
View 5 Replies
View Related
Jun 5, 2014
I have my Apache 2.4.9 for Windows with multiple Virtual Hosts, the main one is configure like this:
Code:
NameVirtualHost vhost1.domain.org:80
<VirtualHost vhost1.domain.org:80>
ServerName vhost1.domain.org
DocumentRoot "C:/Apache24/htdocs"
ServerAdmin techsupport@domain.org
# ErrorLog "logs/vhost1.domain.org-error.log"
# CustomLog "logs/vhost1.domain.org-access.log" common
</VirtualHost>
The rest like this:
Code:
NameVirtualHost vhost2.domain.org:80
<VirtualHost vhost2.domain.org:80>
ServerName vhost2.domain.org
DocumentRoot "C:/Apache24/htdocs/vhost2"
ServerAdmin techsupport@domain.org
# ErrorLog "logs/vhost2.domain.org-error.log"
# CustomLog "logs/vhost2.domain.org-access.log" common
</VirtualHost>
There is no *:80 anywhere and still when I go to any vhost it always load the main one.
What else do I need to check?
View 19 Replies
View Related
Oct 21, 2012
I'm kinda new to apache and I have the following situation.
I have a vps, on which I have set the following:
WordPress Site A, has it's own VirtualHost and domain
WordPress Site B, has it's own VirtualHost and domain
Canvas LMS (not connected to a domain).
Canvas LMS can add multiple accounts, which may (or may not) be accessed individually using a URL that looks as follows:
{canvas_root}/accounts/{account_id}/
For example : http://....../accounts/4/
I need to add a link to each of WP sites, which points to each site's account on Canvas, such that it appears as .../learning/ folder
For example:
Code:
http://WPSiteA/learning/
http://WPSiteB/learning/
which actually represents
Code:
http://WPSiteA/accounts/4/
http://WPSiteB/accounts/5/
Which in turn represents
Code:
http://{my_vps_ip}/accounts/4/
http://{my_vps_ip}/accounts/5/
respectively
Noticing the following:
I do not want the users to see the /account/4/ , just /learning/
I also want to prevent accessing
Canvas LMS is located beyond the website's DocumentRoot
I want this to work with both HTTP and HTTPS
View 3 Replies
View Related
Jan 15, 2008
Has anyone had any good results using spamassasin? If so, how did you go about setting it up? I was hoping someone would share some real world settings that work.
View 10 Replies
View Related
Nov 5, 2009
Can you control SPAM on a server ? I've got this email account that all receives is SPAM, nothing else. I'd like to eliminate this so it doesn't get any more SPAM.
View 13 Replies
View Related
Sep 4, 2008
I have ffmpeg installed on a webserver. If I enter the command to begin a conversion process, or the command is sent through PHP via exec(), it keeps going until it finishes or runs into an error.
Is there a way to cancel a conversion process after it's been started either through the command line or via PHP exec()?
View 4 Replies
View Related
Nov 7, 2008
I have CSF on my server (configserver security and firewall) and it blocks the IP when my server gets attacked, but it always seems to be a little too late... Apache goes down, even though the IP is blocked. I end up running:
iptables -I INPUT -s xx.xx.xx.xx -j DROP
service httpd restart
And that tends to sort things out... but the thing is, sometimes they still manage to attack and even though csf sends me messages explaining how it is connecting, I can check the "deny IPs" and the ip shows as blocked...
What other software is there (eg. mod_evasive... but how can I install it...) that I can run without harming my server, causing problems with CSF or any problems for that matter and how can I install it?
View 11 Replies
View Related
May 15, 2007
Are there particular version of mysql or apache that are best suited when you want to utilize a multi-core/multi-cpu system? For example, we are currently using apache 1.3 and am not sure if it has the inherent ability to use multiple cpus to its benefit.
Or would the fact that it spawns child processes take advantage as the processes will be spawned on the different CPUs?
View 6 Replies
View Related
Nov 5, 2014
I need to configure multiple Apache Web Servers on redhat server. I have copied and extracted Apache 2.2 into redhat server and extracted but not able to install because I don't understand setting prefix. Please let me explain about prefix configuration and how to set it. At the same time I would like to know is it possible to setup 4 Apache Web Servers on same machine if possible then how to. Can we set up different versions of Apache HTTP Servers?
View 17 Replies
View Related
May 24, 2013
I'm trying to get multiple GUN groups to have access to certain directories.
Access to transport, delete
When you go to access transport or delete you get prompted for user name and password when entered you get in. However when I add GUNtest10 in the required ldap group. It doesnt accept your user name and password.
######ACL Directives######
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
<Directory /bills/>
AuthType Basic
AuthBasicProvider ldap
AuthName "1Login with your Windows ID and password"
[Code]....
View 1 Replies
View Related
May 28, 2013
I have apache installed on a box with 2 nics. I've seen how to force the listener to an IP, but the issue is that this box uses DHCP. Is it possible to lock the listener to a network/subnet or to a specific NIC?
View 2 Replies
View Related
Jun 12, 2007
I designed one of my web services so that 'nobody' has to put commands to cron. Unfortunately this thing stops to work from time to time because "someone" is putting 'nobody' back to cron.deny file.
How to stop that?
View 9 Replies
View Related
Nov 7, 2008
Is there a script or program which I can use to start my game servers remotely? I am giving my friend a free game server, but the problem is that he wants the power to start/stop the server because he wants to update the binaries. I am not looking for a game server control panel, but more like a small script or program that has the power to start/stop the server. The game server I am hosting for him is Team Fortress 2. Also, it has to be free since I am not going to make any profit of this.
Game - Team Fortress 2
OS - Windows 2003 Server
Web hosting - WAMP
View 2 Replies
View Related
Jul 9, 2007
I will move my vbulletin site from one server to another server.
my web data is more than 10G including mysql data, I know I may stop the vbulletin at first and move data. but I am expecting a minimal forum-stop time or no forum-stop time.
My concern is, if I don't stop the vbulletin at first, after I dump sql data out and retore them to the new server, it would be more than 3-4 hours, there must be some new data come in during that period. how may I keep the vbulletin running and move all data to new server?
View 0 Replies
View Related
May 27, 2007
We're currently testing Postini after checking with Message Labs, etc and it seemed that Postini was the most highly recommended out of all of them. We shall see, as there does seem to be ALOT that get past their filters with spam level filtering set at their most sensative level.
However, what could I do for accounts with Hosting Firms. We have a couple on Pair, and while they use SA, their filters doesn't seem to be really effective at all. Users can come in over the weekend, and have 5 valid emails out of 200 junk......
BTW, has anyone used any of the spam appliances out there lately.
We tested them about 1.5 years back and none were really effective
View 14 Replies
View Related
Jul 15, 2015
I am trying to run backups to an off site location, however, I have noticed that even if I try on the server side, it will only backup 2gb, which when I check the backup, the file structure is there, but there arent any files in the backups.
View 8 Replies
View Related
