Nirvanix offers "Image manipulation such as image resizing, thumbnail generation, and rotating, video frame extraction, video conversion to Flash video". Is there any competitor? I guess building one on top of S3/EC2/SQS from Amazon would be a no brainer.
View 5 RepliesI would like to know if there's any way we could reduce "conversion times" for videos while converting them with "mencoder" and "x264 codec"?
Is it possible to cluster 2-3 or more servers (Quad core/8GB RAM) so that I can reduce the conversion timings effectively?
The original video sizes are around 500-700MB on an average and I'd like to convert them using mencoder in x264 codec @ 500Kbps bitrate and 2pass settings.
Ofcourse it'll take atleast 1-2hours to encode 1 such video at these settings on a 'single' such server, so is there a way to reduce the conversion times to around 10-15minutes/video by using "parallel encoding" with x264 codec?P.S: I know how to form a cluster, using beowulf/rocks, etc...what I need help with is 'using' the cluster with x264 codec
Prior to installing FFmpeg and its dependencies, I want to know about FFmpeg server-side conversion without the php script. Does it require those php scripts in the first place or I can just run an ssh command?
Also, does this FFmpeg have a configuration file in which you can set the quality of the converted .fla videos?
How about a lossless quality conversion and keeping the size proportion of the video the same?
Meaning, for example, from .avi to .fla without sacrificing/loosing the quality much or noticeably.
I have ffmpeg installed on a webserver. If I enter the command to begin a conversion process, or the command is sent through PHP via exec(), it keeps going until it finishes or runs into an error.
Is there a way to cancel a conversion process after it's been started either through the command line or via PHP exec()?
how to translate this into what would be needed in port speed to cover this server if converted to colo, in Mbps ? Is it 4.5?
--------------------------------------------------------------------------------
The statistics were last updated Wednesday, 14 February 2007 at 10:50,
at which time 'XXXXXXXXX' had been up for 362 days, 17:47:15.
Last 30 days usage (Metered 95%): 4670.57 kb/sec
Last 30 days usage (Metered 95%): 1477797.53 MBytes
Total Utilization ( Last 30 days ): [In 637187 MBytes] [Out 65140 MBytes]
Max Speed: 12.5 MBytes/s
---------------------------------------------------------------------------------
Also, is there a real need to be on a burstable connection, or are flat rates OK most of the time? Just looking for the advantages and disadvantages of it.
I want to do a "near-lossless" video conversion, if that is even possible, in keeping the proportion of the original video. Veoh seems a little bit better / at a higher quality than youtube, and I want to achieve higher quality than that. Literally speaking, I want the converted flv video's quality to be as close as the original video. What ffmpeg command exactly do I need to achieve this? I currently use ClipShare and is experimenting with Ostube for the php script. The default "high-quality" setting for both scripts are not that good of a quality either, with choppy images.
View 4 Replies View Relatedto create an .htaccess rewrite so that all urls in a given directory have their files rewritten so that the %20 spaces are converted to dashes. I'd also like to convert my upper case words to lower case, to stay consistent with other conventions we use in the url.
/directory/Example%20Link.aspx
to
/directory/example-link.aspx
A dynamic php+mySQL site was converted to a static html by mirroring (wget). The result was that each page became an html file named some-page.html
View 4 Replies View RelatedI am using the plesk 12 (Web Host Edition) with admin account. I need to configure file sharing in the plesk.
I referred this LINK
I filled up all required field in File Sharing Settings and Click "OK" button.
This error message,
(Error: Failed to perform IDN conversion from UTF-8 name '0') is shown.
This is a rare issue i have on a RHEL 5.2 + cPanel server.
Server time is:
Tue Nov 11 17:02:51 CST 2008
Squirrelmail time show:
Code:
Last Refresh:
Tue, 5:02 pm
So, that is correct too..
But email arrives with -4 hours time, example:
webmaster@xxx.com 1:03 pm testing email
I already rebooted httpd, exim, and imap server, and the server itself too.. and problem stills.
I got report from webceo that I have some issues. May someone help me fix this?
DNS Lookup: 0.22 sec
Connect time: 0.33 sec
Host ping: 0.10 sec
That mean too slow with the other sites!
I can't get access to a certain site. I always get the page with:
network time out - server at *** takes to long to respons. More people have noticed this and apparently it only happens to people with certain specific providers. And not all the time. Some times they DO get access eventy to they belong to the same ISP. So I guess an ISP isn't blocking access to it otherwise it would be permenantly/The site administrator insists that certain ISP's are blocking his site. He's hosting it on his own server. The domain belongs is registered at namecheap.com.
If an ISP is blocking this site (if that's possible?), that would lead to that 'network timeout' page wouldn't it?
What is the most likely reason for getting a timeout page anyway?
I have a dedicated server specs: AMD 3500+ 64 Bit CPU, 1 GB Ram, 160 GB Sata Drive. For 1 month, CPU load average reaches 40-50 value. This happens about 5-6 times in a day. When I stop httpd service for 30 seconds everything goes normal. I think this is not a DoS attack because it comes systematic, I dont believe no one makes this regularly except bots.
Maybe its a system service or a cronjob but it stops when I turn off httpd service?
How can I be sure about what's making this regularly load?
I also did set up a script which mail me when load average of system goes crazy and restart httpd service. But instant restart is not working to stop load increase.
The server is going down from time to time, every 12 days or so the site hosted there is no longer accesible, everything starts with the site slowing don and down and then is not longer reachable, what we do is to request a power cycle, and with this we start all over again till next power cycle, so on so on, of course, here are my server details and more info on this:
- MySQL - 5.1.41-3ubuntu12.10
- Apache - 2.2.14-5ubuntu8.4
- PHP - 5.3.2-1ubuntu4.9
- operating system: Ubuntu Server 10.04 LTS
After some time emailing the support guys to barely check about what's going on, we received an email with a few things:
1.- found a few errors that likely would cause issues with Apache. The first error is:
[Mon Feb 04 05:03:10 2013] [error] mod_fcgid: fcgid process manager died, restarting the server and the next error is:
[Mon Feb 04 14:32:34 2013] [error] server reached MaxClients setting, consider raising the MaxClients setting ...
Both these errors seem to indicate that you have a process that is running out of control on your server. We were unable to determine what script on your site is running caused your connections to be maxed out however it does appear that before these errors were generated there was a WordPress plugin referenced in your access logs...
2.- Additionally during our review we did find that your error log for mercadodedinerousa.com is 45 GB's which is excessively large and can cause problems when Apache is trying to write a such a large file.
3.- The majority of the errors being logged are:
[Wed Feb 06 12:12:31 2013] [error] [client 200.76.90.5] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/vhosts/mercadodedinerousa.com/httpdocs/index.pl, referer: [URL]
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies View RelatedGot following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6
file: /usr/local/psa/admin/plib/PhDomain.php
line: 1404
code: 0
trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
[code]....
We are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1
but these values are not available in the dropdownlist. attached are the screenshots.
Clean install on openSUSE 13.1
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5
Message Unable to find service node for web service on domain with id=5
File PhDomain.php
Line 1402
Type PleskDBException
Go To Previous Page
Can anyone recommend the best cost-effective solution for serving up video files to websites on other servers?
Basically looking for a central storage location to hold video files (flv, swf) that will be hotlinked from websites on other servers.
I'm currently using about 200GB bandwidth monthly, and need to increase that to about 500GB without violating any TOS or getting cut-off/suspended.
Not sure if the best option will be a hosting account, file storage site, etc.
get Video hosting website or company Like you tube.
That youtube is banned in my country.
how I would be able to set up streaming video on a server for live video as well as archived videos? We've got a client who is requesting streaming events live, bandwidth on our end shouldn't be an issue however I'm wondering where I would start? I've done streaming audio before but I have never done streaming video.
View 2 Replies View RelatedWhat is the best CMS for streaming videos (kinda like youtube) that will allow me to upload bulk amount of videos to the server, instead of uploading them one by one.
View 1 Replies View Relatedi know this probably isnt the right forum, however i think it is probably the closest to the right forum... so anyway...
I have a swf video player, when i load a page in explorer with the swf embeded into it.. the video begins to stream fine.. however if i try and change the explorer page the page wont change untill the entire video has been streamed.. anyone have any ideas as to why this is?... is this something wrong with
a. my explorer settup?...
b. my server setup?... or
c. my swf?...
I have a site which has a short FLV video of about 4 mins. My current host is a bit slow and so the playback is staggered.
I was wondering if anyone can recommend a fast but affordable host for FLV files.
We are going to launch Video Tours service for real-estate companies.
The video files will be stored on the server and shown by request.
What kind of server should we use for this task?
Are there any specific requirements to the server and the network?
any DVR / IP Cams, etc setup like the Geovision setup.
what you are running hardware/software wise.
Does anyone own any video sharing websites? if so what hosting companies do you use. I cant afford a dedi yet as i want to grow but want to start out with VPS or shared
View 1 Replies View Relatedif it would be possible to video cast a video game match via remote desktop? I am trying to do some research to see if it would at all be possible. I've never really messed with it but from what I understand you need two pc's connected together. One setup as the "game" machine which follows around the players and watches the match. The second "capture" machine does just that, caputes all the video/audio that is coming from the game machine and uploads it to a streaming server where users can watch through WMP or whatever.
The biggest problem I see with this is if a person tries to video cast from their home connection the upstream would likely be crap. If the person where able to connect to a remote desktop and run the game on a huge backbone the upstream would be great. I don't know if this would work or not because of the delay between the actual client and the colo boxes.
I'm wondering if anyone can come up with any way to stream live video off my computer to my server. Then allow all my viewers to watch using my server rather than my own bandwidth.
A script / software combo would be sweet.
server is currently running centos i am willing to change it though.