Redirect Http:// To Http://www
Does anyone know how to redirect the URL of a host so that it always goes to the www subdomain? Is this done with RedirectMatch or is a rewrite rule?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Http:// And Http://www
I am having problem with my members sometimes accessing my forum i am getting this error message; Error message: Internet Explorer cannot display the webpage Most likely causes: You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address. What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. I contacted the support Team but they told me its working Fine , but for me and some members its not working all the time.
View Replies!
View Related
Www And Http
All of my 3 new websites are not generating www.. Even if I type [url] all are changing to [url]when page is open... I am asking because I am having irrelevant ads on adsense in all 3 sites thogh these sites are optimized well..
View Replies!
View Related
Using Htaccess To Redirect From Http To Https
if there is anyway to redirect my users to https no matter what page they are on using htaccess? I really don't fancey using full url extentions and changing them on every link on my site. I can get the homepage to redirect to https but not any other. If there is no way to do this does anyone know the shortest hyperlink to use the redirect?
View Replies!
View Related
Http Messed Up But Not Http
where when I view my website through http using Firefox, it never stops loading. If I use IE, then I get a "page can not be displayed" error. If I use https then everything works fine. I have noticed that if I delete lines from the files, I don't have this problem. If I try viewing images (so I know it can't be an html of php problem) some look fine (the very small files). But, larger files, around 168 kb, load halfway and the second half is distorted (green and purple chunks and other random colors and lines). If I view the image through https, the image is perfectly fine! If I put my site through w3.org's validator (just to see what it would report) it says "500 Line too long (limit is 4096)". My website used to work, so I know there isn't any code in the pages that would cause this to happen. Is there an Apache setting I check? Perhaps it is sending a really long header that I can not see? I am not really sure what to do. I have made my site to force https but it's slow and not signed.
View Replies!
View Related
Http-put Proxy / Http-connect Proxy
Anyone can inform how to fix "http-put proxy" or "http-connect proxy" ? My hosting provider said that my dedicated server is not secure because of that. I use CentOS 4.x and only Apache 2.0.52 # rpm -qa | grep htt httpd-2.0.52-28.ent.centos4 httpd-suexec-2.0.52-28.ent.centos4 I searched about the topic but got not much information.
View Replies!
View Related
Http Down ...
Im able to ping / SSH into my server however unable to access any websites? any idea what to do doing a top shows (no sign of http) 4726 root 16 0 2168 1088 828 S 0.3 0.0 0:02.76 top 1 root 15 0 2040 636 548 S 0.0 0.0 0:00.43 init 2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/0 6 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper 7 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kthread 10 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 11 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 136 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/0 139 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khubd 141 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod 205 root 25 0 0 0 0 S 0.0 0.0 0:00.00 pdflush 206 root 15 0 0 0 0 S 0.0 0.0 0:00.00 pdflush 207 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd0 208 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0 359 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 382 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0 383 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 ata_aux 386 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0 387 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1 388 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2 389 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3 398 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ksnapd 401 root 10 -5 0 0 0 S 0.0 0.0 0:00.10 kjournald 433 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kauditd 467 root 21 -4 2760 1176 396 S 0.0 0.0 0:00.52 udevd 887 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kedac
View Replies!
View Related
OPTIONS * HTTP/1.0
Am having a lot of this in my apache status in both, a dedicated server and a vps, i think is affecting our load, example of just some of the ones that appear in the apache status (whm) Code: 70-0 - 0/0/21 . 0.00 18726 0 0.0 0.00 0.17 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 71-0 - 0/0/33 . 0.00 18730 0 0.0 0.00 0.20 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 72-0 - 0/0/93 . 0.00 18731 0 0.0 0.00 0.83 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 73-0 - 0/0/17 . 0.00 18734 0 0.0 0.00 0.07 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 74-0 - 0/0/24 . 0.00 123794 0 0.0 0.00 0.13 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 75-0 - 0/0/30 . 0.08 123710 0 0.0 0.00 0.07 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 76-0 - 0/0/9 . 0.00 123783 0 0.0 0.00 0.03 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 77-0 - 0/0/10 . 0.01 123709 0 0.0 0.00 0.01 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 78-0 - 0/0/19 . 0.00 123748 232 0.0 0.00 0.17 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 79-0 - 0/0/129 . 0.00 123793 0 0.0 0.00 1.77 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 80-0 - 0/0/1 . 0.00 177694 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 81-0 - 0/0/1 . 0.00 177693 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 82-0 - 0/0/1 . 0.00 177692 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 83-0 - 0/0/3 . 0.07 177638 0 0.0 0.00 0.02 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 84-0 - 0/0/13 . 0.16 177609 0 0.0 0.00 0.03 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 85-0 - 0/0/1 . 0.00 177691 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 86-0 - 0/0/12 . 0.08 177616 0 0.0 0.00 0.01 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0 87-0 - 0/0/3 . 0.00 177647 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
View Replies!
View Related
Ping Is Down, Http Is Up
My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (all-nettools.com, dnsstuff.com, etc.) and host unreachable. I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.
View Replies!
View Related
Http To Https
Currently I have a URL that has HTTP. This has been given to the public. There is no doubt that they have added this URL to their favorites. In about 2 weeks, I will be applying an SSL certificate that would add an ‘S’ to the HTTP (e.g. https) My questions is: After applying this SSL certificate, which adds an “S”, will the link saved in my users’ favorites still work? Or do I have to add some HTML code that will redirect them?
View Replies!
View Related
Planet HTTP
Does Anyone Know Thier Nameservers? It Was Like Ns5.hyperdrive.net Please Help Me And Let Me Know, My Job Is On The Line I Called Them, Once They Found Out I Had A Problem They Hung Up!
View Replies!
View Related
Https Instead Http
I have installed SSL for the domain abc.com, for security reason I'd like make [url]is default for all access, that mean if the visitor type [url]on the browser, it will auto forward to[url]
View Replies!
View Related
Https And Http
I am maintaining a site that is totally on a secure folder. I have been asked to make only the things like the cart to be secure and to make the rest of the site non-secure. there is an https and an http folder on the server all of the site is now on the https folder. I thought all I needed to do is move the pages I wanted to be non-secure to the http folder and then use an absolute address when I needed to refer betweem them. I called my hosting people (the people who originally developer the site and made it all secure before handing to it me) and asked them about what all I need to do. they said its very complicated because I am dealing with 2 different root directories and didn't offer me much info on how to do it myself instead they just said if I can't figure it out they will do it for a price.
View Replies!
View Related
Http And Httpd...
I have a question related to apache. Last night, I noticed the system was using 100% CPU. So I did "top" and saw a process, with command "http" using it all up. I tried restarting apache a few times because I though that was it, it didn't stop. Then I realized apache is httpd. I killed the process and haven't seen it since (least 12 hours now). What is this? Has anyone ever had this? Does this process belong to apache or something else and I just don't know it? If so, any general ideas on why it was using 100% CPU? I can post my configuration files if needed. I also did an rkhunter scan. Everything came up as not infected or OK there, so... MD5 MD5 compared: 0 Incorrect MD5 checksums: 0 File scan Scanned files: 342 Possible infected files: 0 Application scan Scanning took 168 seconds This is CentOS 4.4, Pentium D, 1gb RAM box, guarded by Smoothwall.
View Replies!
View Related
Redirect Example.com To Www.example.com
I have multiple domains on my web server. One of my domains does not display its website when using example.com in the location bar. Eg. example.com redirects to site2.com but www.example.com displays properly. I tried adding to the htaccess file: Quote: Options +FollowSymlinks RewriteEngine on RewriteCond %{HTTP_HOST} !^www.example.com RewriteRule ^(.*)$ http://www.example.com/$1 [R=permanent,L] It doesn't work. The redirect does not occur.
View Replies!
View Related
WWW Redirect
i have a Centos VPS with webmin i have modified my .htaccess file to redirtect all users from WWW. to the root of the domain i also tried to block some ip addresses through my .htaccess file but it seems that whatever code i enter in my .htaccess file does not work. i think it is disabled somewhere as both the abvoe codes do not work how can i enable .htaccess file?
View Replies!
View Related
HTTP Requests With Crontab?
I set up a cron to run every minute & I'm running a PHP script by way of cron like wget http://example.com/some_script.php Now does each request of Cron is a seperate HTTP Request or what? Say my script takes more than 1 minute to execute completely but before its completed, its called again. So, will that effect the PHP script running because of previous HTTP Request or will it create a new HTTP Request & let the previous request finish its operation? Technically, it shouldn't block/affect the previous request, but I'm not sure!!
View Replies!
View Related
Http Has A Uid 0 Account
I got this email recently just after doing a cpanel update (/script/upcp) Quote: IMPORTANT: Do not ignore this email. This message is to inform you that the account http has user id 0 (root privs). This could mean that your system was compromised (OwN3D). To be safe you should verify that your system has not been compromised. What should I do next? Was this because of the update, or should I reinstall the system?
View Replies!
View Related
Current Connections For HTTP
I want to know the right command by which one can see current connection to the HTTP server. I searched a while and got 2 different answers, wanted to know which is more accurate as there is lot of difference in results Code: -bash-3.2# ps aux|grep -i HTTP|wc -l 19 -bash-3.2# netstat -an|grep :80|wc -l 228
View Replies!
View Related
Recurring HTTP Exploit
I'm having a recurring issue where someone is getting a script into /tmp, taking down the webserver and setting up their stupid IRC bot on port 80. It's annoying because thus far I have not been able to track them down. As soon as it happens I'm combing through the logs trying to find out what PHP script (probably PHPBB or something like it from one of my customers) is letting them through but there is nothing in the logs. I've had this happen before but usually there's some trace in the logs like some ASCII encoded string. Right now I just have little to nothing to go on and it's quite annoying. I've combed all over the net but found next to nothing. RKHunter doesn't even know it exists.
View Replies!
View Related
FLV Playng Through HTTP
i have Apache 2. Before now, on the same server i had the same OS : CentoOS at the same version but an old version of DirectAdmin with Apache 1.3, unfortunately my sysadmin installed the last version with Apache 2, so now i ask you for help. I host videos in virtual directory : ( ex: video1.myweb.com ; video2.myweb.com ) Before Now : CentOS 4.5 Apache 1.3 JW FLV 3.14 1. the user click the play button 2. the player put on screen the first frame of video and start loading 3. the player when have loaded 3% start play the video 4. if the buffer become empty the player pause the reproduction and restart from the current time position when the buffer is full. Now CentOs 4.5 Apache 2 JW FLV 3.14 1. the user click the play button 2. the player doesn't start ( black screen ) --> probably in backgorund the download is started because: 3. the user click again the button --> and now the player start the reproduction of the video 4. if the player have not loaded all the video, the player stop with black screen 5. the user click on play and the player restart not from the current posizion but from the start of the video Clearly this depend on Apache bad configuration i think, but i have no idea how can i resolve, and on google i have not found any tutorial and documentation.
View Replies!
View Related
HTTP 500 Error
I recently transferred my domain names from MyDomain.com to GoDaddy.com and now whenever you click on a link to my site from the search results it produces an HTTP 500 Error. I am using HostGator and they said that it is "not what they assist with". I know it could be a number of things but they told me to check with my redirects and there is nothing in the .htaccess file.
View Replies!
View Related
Http Doesnt Respond
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said Good morning, Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh: / etc / init.d / httpd start Starting httpd: [OK] We see that the port is open 80: netstat-tanpu | grep 80 tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd From the outside, at this precise moment, we are able to establish a connection on port 80: Telnet ks357687.kimsufi.com 80 Trying 91.121.148.X ... Connected to ks357687.kimsufi.com. Escape character is'^]'. Get <! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN"> <html> <head> <title> 501 Method Not Implemented </ title> </ head> <body> <h1> Method Not Implemented </ h1> <p> get to / not supported. <br /> </ p> <hr> <address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address> </ body> </ html> Connection closed by foreign host. If I stop the Apache server: / etc / init.d / httpd stop Stopping httpd: [OK] More than 80 active port or connection possible from the outside: In this case the connection of the exterior evidemment is not possible: Telnet ks357687.kimsufi.com 80 Trying 91.121.148.X ... telnet: Unable to connect to remote host: Connection refused
View Replies!
View Related
HTTP Keapalive Timeout
I'm trying to solve an issue with certain customers timing out. In regards to the "http KeepAlive timeout" value.... When this timer expires, does the webserver have the tcp stack send a FIN? IF so, does it actually do it like at six or seven seconds? It's actually IBM IHS in this case.
View Replies!
View Related
General HTTP Error
my "Google Webmaster Tools" the other day and came across this in web crawl errors: URL: [url] Detail: General HTTP error Problem Detected On: Sep 13, 2008 "Last updated Sep 16" Does this mean it detected the problem on sep 13 and it has tried to access the page since then and has been unable to? I've been able to access the page fine between the 13th and 16th? Anything i should be worried about? "Google last accessed my homepage on the 5th"...
View Replies!
View Related
Http+limit User
How can i set user limit to access web site , Ex:- if my site access 10000 users at a time and then if any more user access that site it will receive error or custom error page. and how to and where i can set this values...........
View Replies!
View Related
HTTP Request For HTML Only
Is there a way to construct an HTML request so that only HTML text is returned (without images or rich media)? I assume search engines do this - how? What I'm trying to do is write an Apache module that will retrieve only text from a web site. The idea is to provide a Lynx-like experience, using Apache as a proxy between my workstation and my ISP.
View Replies!
View Related
Server Being Attacked Via Http
my friend's server is being attacked, the http processes shoots up causing the server load to go above 200 in minutes of starting httpd which causes server to die. this is how the apache web server's access_log would log a normal http request; ------------------------------------------------------ "xx.xxx.xx.xx - - [01/Jun/2007:22:13:21] "GET /folder/name.gif HTTP/1.1" 200 877 [url]"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1)" ------------------------------------------------------ Today when the http load increased we saw hundreds of following requests; ------------------------------------------------------ "xx.xxx.xx.xx - - [01/Jun/2007:22:13:21] "GET /? HTTP/1.1" 200 16305 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" ------------------------------------------------------ You see the difference between a legitimate http access log entry and the above one is that the legitimate one shows the filename(GET /folder/name.gif) and domain name being requested whereas the second one shows ("GET /?") Above requests continously originate from 30 to 40 different ip addresses. Most of them russian ips, and many form US and canada to. When i do a grep "GET /?" in access log there are thousands of these which started just today. I cannot block each ips because i feel they have hundreds of IPs to initiate these requests from.
View Replies!
View Related
Proving A Concept.. HTTP
Would very much appreciate assistance here, I know just enough about Linux to be slightly dangerous and am coming at this issue from a business point of view not technical so excuse anything I say thats technically inept. On Sunday 5th August at 9am, I attempted to access our e-commerce site admin panel to check on sales. Nothing. 404.I tried the main site. Still nothing. I placed a call to Tech support and waited. Let's just ignore the customer service disaster that followed but it wasn't until 9.30pm that evening that I actually spoke to someone. They informed me that Apache had failed due to an oversized log file. I'm ok at this point, I understand what has happened. The technician moved the log file and then brought Apache back up and everything returned to normal. What I'm not sure about is that our 'provider' should provide a fully managed server with service monitoring. 5 point, including HTTP. They are now claiming that HTTP was not down for 12 hours and that their monitoring did not fail but that it was something else that caused me (or 3k customers who usually view my site on a Sunday) to be unable to view our pages. They can't tell me what it is but are adamant that HTTP was running. This is where I need help. a) Am I not correct in thinking that without Apache, there is no serving of web pages? b) That any monitoring system should have recognised this and alerted an engineer? c) How do I go about proving my point? I have root access.. I think.. I have a feeling its not full root. Are there any obvious steps, I would need very clear instructions if its to work, that I can take to prove whether I'm right or wrong? If not, is there anyone who comes highly recommended who can help me? Despite HTTP being down for over 12 hours and no pages being served, the 'provider' is being unhelpful.
View Replies!
View Related
What Else Would Be Blocking HTTP Requests
I have a guy who can't get to any of the 100 or so virtual hosts on my RHEL3 server. It's running the latest Apache RPM from RedHat. I also have mod_evasive and mod_security running. Here's what I know. The guy *CAN* connect via SSH and FTP. The guy *CAN* see the default web page when he hits the IP in his web browser (e.g. he types [url]into the address bar on IE). But when he uses any of the host names on the server he *CAN NOT* see anything. He gets timeout errors. His IP in NOT in ANY error logs, it's not in mod_evasive or mod_security, it's not in IPTABLES, it's not anywhere I can see. I must be missing something. Anyone have any ideas? What would be in front of Apache blocking his requests?
View Replies!
View Related
RPC Over Http For Email
I have always been interested in trying new things...but this one is a bit odd. I know Microsoft likes to do things different..but it's not always clear *why*. I now have a trial exchange account on one of my domains..because I was curious about the claims of redundancy, archiving and fault tolerance. This happened because I am 100% sure I "lost" a few emails recently. Nevertheless...I did I was told. Just to put this in perspective..this setup is so complex they have you download a installer to do it for you. Seriously...it uses proxies and only the fates know what else. It works, though. My question is this: Do I really need all this extra stuff? It is amazing the options you have to get mail from the servers: POP3, IMAP and webside I expected..but they have several fancy phones listed..and..(gasp) Mac access as well through entourage. They even have access through a cell phone's browser (nifty) Still..are there any advantages for all the rpc over http stuff? Or could I revert to a simpler (faster) setup without sacrificing the promise of better reliability? >>>I forgot to mention another little perk that comes with this.. even with the free trial..free outlook. I used to have outlook..and I did use many of it's features. It's great to have it back!
View Replies!
View Related
Apache HTTP Flooding
Someone seems to be flooding our HTTP server somehow. We use the latest version of Apache on Windows. Is there any Windows modules that can filter the total amount of IP connections, or something built into Windows that could filter this?
View Replies!
View Related
Redirect Domain To Www
The thing is that we have a dedicated server at our company hosting several domains, and right now you can access them both with the www prefix or without it, but there is no redirection in case you access without it, and this has negative impact with SEO related stuff. I have the rewrite apache module enabled (I tested with a script I found on the net), and I also tried a test configuring a single domain including some code about redirection. Right now I'm getting a nice "500 Internal Server Error" This is the code in .htaccess Code: Option +FollowSymlinks RewriteEngine On RewriteCond %{http_host} ^mydomain.com [NC] RewriteRule ^(.*)$ [url] (mydomain.com is, obviously, a replacement for the real domain in both cases)
View Replies!
View Related
Best Http Software For Image Server
I need to find out what would be the best software to run an image website for one of my clients, there is only one domain so I've considered using LiteSpeed Standard (Free)... What server do you think would be the best? All I need is PHP support for the image viewer software. Apache Lighttpd LiteSpeed nginx
View Replies!
View Related
Http / Php 500 Errors
On a cpanel / centos box: We are facing with a strange issue about URLs. At any web site in our reseller account in php pages when we add http:// or http%3A%2F%2F to the URL as a query string server returns Internal Server Error 500. For example when I try to access such page /index.php?q=http%3A%2F%2F[url] or /index.php?q=[url]I get this error. Is there any misconfiguration about PHP or Apache at server or what can we do to solve this problem? Server uses PHP 5.2.9 / apache 2.2
View Replies!
View Related
Strange Http Query Attack
I have a problem since yesterday in one of my servers, Im receiving between 200 and 300 hits by second from different IPs to a non existent path in a site, the hits are going to different cracks, films and download query's, this site is a directory and its not a warez or p2p site. The site is onemilliondirectory.com, and I have suspended it because it was using a lot of resources of the first server, now its being redirected to other location, I have placed some traffic trackers to determine the referer or any other usefull info about the visitors, but the referer is always empty and I think that they are fake users because the statcounter tracker do not recognize the visits. For example, some of the hits are: Code: GET /suspended.page/?v=ABC%204%20KIDS%20Workshop%201.0.zip HTTP GET /suspended.page/?v=DecryptSQL%202.8.zip HTTP/1.1 GET /suspended.page/?v=[0]%20Msn%20Live%20Messenger%20Mobile.zip GET /inactive.html?v=Able%20Photo%20Slide%20Show%202.2.5.5.zip GET /suspended.page/?v=English%20Grammar%20Worksheet%201.4.zip GET /inactive.html?v=Karaoke%205%2030.zip HTTP/1.1 GET /suspended.page/?v=Nero%208%208.3.2.1.zip HTTP/1.1 Detail of one of the visits from the cpanel latest visitors tool: Code: Host: 82.246.88.241 /inactive.html?a=Knowing.2009.TS.FRENCH.XVID-PaGlop.****.[emule-island.com].avi Http Code: 200 Date: Apr 07 16:39:54 Http Version: HTTP/1.1 Size in Bytes: 262 Referer: - Agent: Internet Explorer
View Replies!
View Related
How Can I Http Access A Server Without A Domain
I've setup a dedicated server that is currently running with a domain bound to it. However this time I want to setup a centos 5.1 + latest apache 2 + bind 9 server that can only be connected to by IP address and doesn't have a domain name. So what do I need to modify in the below files to do so: First of all will I even need bind at all? I already have it setup and (mis-)configured but I guess if I don't need it I can just take if off of autostart and stop the process "named". Named.conf options { pid-file "/var/named/chroot/var/run/named/named.pid"; directory "/var/named/chroot/var/named"; query-source address * port 53; allow-query { any; }; allow-transfer { }; recursion no; notify no; version "unknown"; }; logging { category default { null; }; }; zone "server.domain.com" { type master; file "server.domain.com.db"; }; I don't even want the zone have domain.com in its name but that's just there so I could show you how I'd include server.domain.com.db. server.domain.com.db $TTL 14400 @ IN SOA ns1.domain.com. root.server.domain.com. ( 2007052503 14400 3600 1209600 86400 ) server.domain.com. 14400 IN NS ns1.domain.com. server.domain.com. 14400 IN NS ns2.domain.com. localhost 14400 IN A 127.0.0.1 www 14400 IN A 78.129.174.164 I'm not sure what to do about those references to domain.com here, they shouldn't be needed but without them I don't know what to put here. ^^ Obviously I can't use those nameservers... resolv.conf nameserver 127.0.0.1 nameserver 78.129.143.155 nameserver 87.117.198.200 nameserver 87.117.196.200 The only thing missing from this file is "search domain.com" at the top, is that needed even though I won't really have any domains used by this server? /etc/hosts: # Do not remove the following line, or various programs # that require network functionality will fail ....
View Replies!
View Related
HTTP IP Showing Random Account
My server is centos 5 with cPanel. When I go to [url](xx.xx.xx.xx being an IP on my server) it shows a random web hosting account that is on that IP? How do I stop this and put one page there or the "great success, cPanel and apache are working on your server" page there?
View Replies!
View Related
Invalid URI In Request GET . HTTP/1.0
In my logs: [Tue Jul 22 01:01:35 2008] [error] [client x.x.x.x] Invalid URI in request GET . HTTP/1.0 (yes, that is it for this entry/line) This showed up in logwatch as: Requests with error response codes 400 Bad Request .: 4 Time(s) ...what was this guy trying to do? The offending IP was banned in APF last night, if his IP is still showing up in my logs, is he using aproxy? After adding his ip to: /etc/apf/deny_hosts.rules I ran: apf -r
View Replies!
View Related
Setting Up A HTTP Tunnel On My VPS
I'm currently at Uni and can't play any online games, or access various online services, due to the restrictive network (apparently "open ports" are evil ) I'm looking at setting up a HTTP tunnel (SSH is blocked) which can allow me to: 1) Get any connections from one of my games routed (over HTTP) to: 2) my VPS, which then forwards this traffic onto the game's servers My VPS runs on Linux (CentOS 5), my current computer runs off Windows Vista. I know there are services out there that can provide this for a low monthly fee, but I'd be happier to maintain this myself.
View Replies!
View Related
Convert Socks To HTTP Proxy
I am trying to figure out how to do a setup to convert socks to http. I have an application which only supports http proxy. I am using putty to perform ssh tunneling but I guess I can only use that as a socks connection.
View Replies!
View Related
HTTP 502 Proxy Error
Someone tried to access their webmail from a remote location and got a page not found error. It did have the following error like this at the bottom though: "HTTP 502 Proxy Error - The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204) Internet Security and Acceleration Server" This is a cpanel server with Centos. I did not find any info via cpanel's forums about the 502 error.
View Replies!
View Related
Enable Http Headers In Plesk
I have a problem with my site where users log in (vbulletin) and yet the script doesn't log them in. After some research i found out this happens due to http headers. I own a dedicated server which has plesk as the control panel, i do not know where to go and find the option to enable Http Headers.
View Replies!
View Related
|
TRACKER
