i have decided to try out easyvps hosting service but firs i would like to know it's ping and speed around the world before taking it in serious consideration.
Here is the test file:
easyvpshost.com/100mb.bin
server outside of US has this ping bellow
Is this OK? or painful for users to reach it?[url]
I have just gotten a new server and the ping results were pretty fine. However, when it comes to the download speed its horrible. What could be the issue?
View 10 Replies View RelatedWe have a dedicated streaming server with Leaseweb in Netherlands that we use primarily to stream video content to North American clients. This server only utilize 75 to 80% of it's allowed bandwidth capacity. However, some clients have buffering issues with the live content.
When we talk to Leaseweb they have asked us to provide traceroute between server and client. Can some one please explain to me what below traceroute means in terms of streaming?
Hop(ms)(ms)(ms)IP AddressHost name
180385472.249.134.177-
291100618.9.232.73xe-5-3-0.edge3.dallas1.level3.net
318774.68.19.5ae-13-69.car3.dallas1.level3.net
47774.68.63.194-
5573726213.248.80.145atl-bb1-link.telia.net
655516880.91.252.213ash-bb1-link.telia.net
7123130147213.248.65.209ldn-bb2-pos6-0-0.telia.net
815517312980.91.253.208adm-bb2-link.telia.net
912812412880.91.253.213adm-b4-link.telia.net
10193212202213.248.90.154leaseweb-ic-131631-adm-b4.c.telia.net
11146146152XX.XX.XXX.XXXXXX.leaseweb.com
Trace complete
We usually ask clients to do a speedtest to Netherlands. Most of the time their speeds are ok. I am hoping some one with streaming experience can advice me so I can ask Leaseweb for help.
Is there a quick way to check out how fast you are from the web host your buying..
View 14 Replies View RelatedHow can I check the post speed using SSH
so I can know if the server is on 10mbps or 20 or 100mbps?
I have two servers one from hostmysite and other one is from 15minute server, I would like to know which one is faster, I have a dedicated server from 15minuteserver, but sometime I get slow speed I am not really sure which one is faster.
test two Ips and let me know.
76.12.21.39
216.118.117.165
How do you prefer to check your hosts speed - with the help of ping test or any other mothods? Say HqHost.net offers their clients an uploaddownload file to check their speed. Which methods do you use?
View 6 Replies View RelatedCan you conduct me to check the server speed by commands ( linux fedora )?
How to check connection speed of the server. i.e. 100 Mbps , 10 Mbps, etc.
I saw an message like this : " NIC Link is Up 10 Mbps Full Duplex", according to my knowledge, this is my server connection speed/ bandwidth is 10 Mbps, isn't it?
Can someone throw light, on how to check my Server's network speed?
I have uploaded a 200 MB dump and getting this result :
Quote:
# wget ******/dump.doc
HTTP request sent, awaiting response... 200 OK
Length: 231,816,431 [application/msword]
2% [> ]
4,984,776 1.15M/s ETA 03:22
1) How is this Dedicated Box, speed considered?
2) Any other way to test network speed?
I am planing to buy XLHOST dedicated server for my software project. Before buying this dedicated server I want to check it's standard server speed using following file. Please can anyone check download speed?[url]I will upload my file after getting satisfied with your test. Then I will post my dedicated server file link here to cross check download speed.
View 8 Replies View Related15ms ping vs 40ms ping vs 170ms ping
Which you think is still acceptable for a website?
Does it matter?
I did a few tests
Pinging lunarpages.com [74.50.4.210] with 32 bytes of data:
Average = 191ms
Pinging hostmonster.com [74.220.195.150] with 32 bytes of data:
Average = 191ms
Pinging godaddy.com [97.74.104.201] with 32 bytes of data:
Average = 175ms
Pinging rackspace.com [72.32.191.88] with 32 bytes of data:
Average = 150ms
Pinging siteground.com [209.85.102.36] with 32 bytes of data:
Average = 148ms
Pinging hostgator.com [74.54.219.185] with 32 bytes of data:
Average = 147ms
Pinging ipowerweb.com [66.96.130.200] with 32 bytes of data:
Average = 113ms
The pages load really fast @ ipowerweb
I am hosting some sites with innohosting and it seems they are loading slow. This could be because of my internet so im not sure.
My ping is below. What is considered good?
64 bytes from 67.220.209.81: icmp_seq=0 ttl=39 time=87.104 ms
64 bytes from 67.220.209.81: icmp_seq=1 ttl=39 time=89.647 ms
64 bytes from 67.220.209.81: icmp_seq=2 ttl=39 time=110.035 ms
64 bytes from 67.220.209.81: icmp_seq=3 ttl=39 time=130.241 ms
64 bytes from 67.220.209.81: icmp_seq=4 ttl=39 time=139.109 ms
64 bytes from 67.220.209.81: icmp_seq=5 ttl=39 time=163.304 ms
64 bytes from 67.220.209.81: icmp_seq=6 ttl=39 time=96.559 ms
64 bytes from 67.220.209.81: icmp_seq=7 ttl=39 time=96.478 ms
64 bytes from 67.220.209.81: icmp_seq=8 ttl=39 time=103.415 ms
64 bytes from 67.220.209.81: icmp_seq=10 ttl=39 time=111.042 ms
64 bytes from 67.220.209.81: icmp_seq=11 ttl=39 time=118.234 ms
64 bytes from 67.220.209.81: icmp_seq=12 ttl=39 time=94.255 ms
64 bytes from 67.220.209.81: icmp_seq=13 ttl=39 time=86.390 ms
64 bytes from 67.220.209.81: icmp_seq=14 ttl=39 time=95.784 ms
64 bytes from 67.220.209.81: icmp_seq=15 ttl=39 time=89.193 ms
I have a lot of sites with big graphics that need to load fast.
# how can we turn this request on our firewall ?
C:Documents and SettingsOx>ping www.host.com
Pinging webhostingtalk.com [xx.xx.xx.x] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for xx.xx.xx.x :
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss ),
# and how to secure our server from SYN Flood DoS Attack Experiments?
Where can I check a host's uptime record?
What is the most credible source to verify a host's uptime record?
What difference in page load time does it make if I move away from GoDaddy hosting? Or doesn't it make much difference? If it does make a difference, what kind of percentage improvement are we talking about?
View 12 Replies View RelatedI got report from webceo that I have some issues. May someone help me fix this?
DNS Lookup: 0.22 sec
Connect time: 0.33 sec
Host ping: 0.10 sec
That mean too slow with the other sites!
Has anyone helped clients transition from one domain to another? Maybe dissolving a partnership or renaming their company... so a new domain name has been registered and a new website created.
2 Issues:
#1 Using .htaccess 301 redirect
We used the following command line in their old website's htaccess file
Redirect 301 / [url]
The goal was to get people try to visit any page of their old website (i.e. OldWebsite.com/contact.html) redirected to their new website (i.e. NewWebsite.com/contact.html). Isn't that supposed to change the address bar's URL, too? For some reason, I visit their old site and I seem to be redirected to their new website but the address bar still has their old domain name? Something is going on???
#2 Having their new company name for 2 years now. People can enter her new company name in Google, MSN or Yahoo. Her new company name appears in the search results but has the old domain name associated with it. We are trying to get rid of any reference to that old domain name? What's the easiest way to do this? So what people see in search engines is:
New Company
Short Meta Description
www.OldDomain.com
What steps did I miss in this transition?
What steps do I have to take on their old website/old web server to control it's appearance on search engines and make sure people get to the new website?
I am having some serious speed issues with my 1Gbit server at FDC. After opening a ticket, they've simply dismissed it as a server configuration problem. However I am convinced it isn't because certain ISP's (usually universities) get good speeds, usually 700kb/sec but the vast majority of my users get between 20-50 kb/sec and it's causing a lot of complaints.
Furthermore I have other servers with FDC which are 100mbit which perform better than my 1 Gbit one. There are no server bottlenecks (CPU/RAM/HDD), since I've closely monitored them (PRTG) and they aren't even heavily utilised. So the problem is with the network at some point.
Speed Test : [url]
where abouts you are downloading from, your ISP and net connection. Wget's from servers are also welcome as are traceroutes.
I would like to know how to check load via ssh and check files causing load?
I want the ssh codes for 2 different set of control panels, one with cpanel+whm and other with kloxo+hypervm
and I would also know how to check the files causing the load, such as some files could have been interrupted while processing, so they could be causing load some times, so I want to stop such processes if any are running on the vps on my friends accounts
My server DC technician change the cable to another switch in another rack. all in sudden, my server went 'offline'.
the weird thing is,
I can ping the server IP
When I plug my KVM,
I can ping google.com from my server
But when I lynx google.com, it keep saying
HTTP requests sent; waiting for response._
When I open my putty and SSH, it keep waiting.
When I try to ssh from another server, it keep waiting
$ ssh school@xxx.xxx.xxx.xx
[nothing happen]
$ ping xxx.xxx.xxx.xx
PING xxx.xxx.xxx.xx (xxx.xxx.xxx.xx) 56(84) bytes of data.
64 bytes from xxx.xxx.xxx.xx: icmp_seq=1 ttl=63 time=1.10 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=2 ttl=63 time=0.864 ms
64 bytes from xxx.xxx.xxx.xx: icmp_seq=3 ttl=63 time=0.854 ms
- I can ping my server from MS DOS
- I can ping my server from Iptools.com
- I can ping my server from another server
But..
- I cannot ssh into my server
- I cannot ssh into my server from another server
Inside my server..
- I can ping google.com, yahoo.com, other servers
- But I cannot lynx and open all websites
When I restart network, it shows [refer attachment] captured from my KVM
PING
Whats that?
after my server down, i ask for reboot then the server up again.
but i cant access SSH via my main ip, but i can access SSH via second ip. when i ping main ip, all is request time, but my second ip can ping.
ok main ip cannot use, so i use second ip the main problem come i cant do yum update kernel, will show this error
Quote:
Setting up Update Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update
when i try run socks5 proxy in my server, it running, but when i use it for my personal pc, the socks5 it not run....just show proxy is offline.
when i do wget some direct links
it always show, but never download
Quote:
[root@xxxx ~]# wget ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
--11:39:24-- ftp://ftp.is.co.za/mirror/centos/4.4...4E.12.i386.rpm
=> `squid-2.5.STABLE6-3.4E.12.i386.rpm'
Resolving ftp.is.co.za...
so i try to go check resolv.conf, but don have problem, my other 2 same server also dont have problem with this dns server.
I just moved from PowerVPS to EuroVPS, being located in Europe myself, and was of course hoping for much better ping times. Also EuroVPS advertise themselves with a 30ms ping to most of Europe.
Anyway after my VPS was installed I compared the pings:EuroVPS (85.17.48.162) average ping: 335ms
PowerVPS (69.65.106.19) average ping: 129ms
335ms is of course ridiculously high, and after writing them a support ticket they told me it's probably a latency problem with my ISP
Can you please post the ping you get for 85.17.48.162 (preferably people located in Europe)?
I have configured Nagios on my network 10+ Servers (Linux+Windows) now when i check through http://localhost/nagios everything is ok but only ping command is giving following message :-
Unknown
bin/ping -n -U -w 10 -c 5 x.x.x.x
CRITICAL - Could not interpret output from ping command
and mail me "server down " message
So what is the issue ?
I am able to run this command through command line
./check_ping -H {server} -w 100.0,20% -c 500,50% -p 5
PING OK - Packet loss = 0%
./check_ping -H x.x.x.x -w 300.0,80% -c 500.0,100% -p 5
PING OK - Packet loss = 0%
I'm running my own OpenVZ server with a few VPS's running on it and have a small network issue.
I can't ping any VE from the HN. All the other networking is working ok (strangely I can ping the HN from the VE) apart from this. It's a simple setup with one network card connected to the internet.
OpenVZ the latest stable version running on CentOS 5.2
I'm pretty sure it's not a firewall problem but is something to do with arp or routing and one of the settings in sysctl.conf
Has anyone else seen this?
i've only ever used pings to test if a host is up or down.
But what other information am i looking for in ping tests. For e.g., the time in ms the TTL etc etc?
How can i test pinging my server from different locations around the world?
i install one xen guest ( centos5)
i run yum update and result is :
-bash-3.1# yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories
Could not retrieve mirrorlist http://mirrorlist.centos.org/?releas...86&repo=extras error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot find a valid baseurl for repo: extras
i use of middle config :
/etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.0.255
IPADDR=192.168.0.13
IPV6ADDR=
IPV6PREFIX=
NETMASK=255.255.255.0
NETWORK=192.168.0.0
ONBOOT=yes /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=myhost.l3i.ca
GATEWAY=192.168.0.1 /etc/resolv.conf (DNS resolver)
nameserver 4.2.2.1
nameserver 4.2.2.2
My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (all-nettools.com, dnsstuff.com, etc.) and host unreachable.
I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.