Can you conduct me to check the server speed by commands ( linux fedora )?
How to check connection speed of the server. i.e. 100 Mbps , 10 Mbps, etc.
I saw an message like this : " NIC Link is Up 10 Mbps Full Duplex", according to my knowledge, this is my server connection speed/ bandwidth is 10 Mbps, isn't it?
I have two servers one from hostmysite and other one is from 15minute server, I would like to know which one is faster, I have a dedicated server from 15minuteserver, but sometime I get slow speed I am not really sure which one is faster.
test two Ips and let me know.
76.12.21.39
216.118.117.165
Can someone throw light, on how to check my Server's network speed?
I have uploaded a 200 MB dump and getting this result :
Quote:
# wget ******/dump.doc
HTTP request sent, awaiting response... 200 OK
Length: 231,816,431 [application/msword]
2% [> ]
4,984,776 1.15M/s ETA 03:22
1) How is this Dedicated Box, speed considered?
2) Any other way to test network speed?
I am planing to buy XLHOST dedicated server for my software project. Before buying this dedicated server I want to check it's standard server speed using following file. Please can anyone check download speed?[url]I will upload my file after getting satisfied with your test. Then I will post my dedicated server file link here to cross check download speed.
View 8 Replies View RelatedI have a dedicated server, but i dont know how i can measure the bandwidth at specific time, the problem that i feal that my bandwidth is below what i requested...
what i mean with Bandwidth is not trfic, it is the connection speed at a moment
(i.e. 50Mbps)
I need a backup server
main tasks
- Download/Upload files from/to my other servers very fast.
- 1 GBps Port
- Storage no more 250 GB .
- 600 GB Traffic
- access the server from the IP no domain
- Cheaper always better : )
What offers / recommendation do you have for me?
Is there a quick way to check out how fast you are from the web host your buying..
View 14 Replies View RelatedHow can I check the post speed using SSH
so I can know if the server is on 10mbps or 20 or 100mbps?
How do you prefer to check your hosts speed - with the help of ping test or any other mothods? Say HqHost.net offers their clients an uploaddownload file to check their speed. Which methods do you use?
View 6 Replies View Relatedi have decided to try out easyvps hosting service but firs i would like to know it's ping and speed around the world before taking it in serious consideration.
Here is the test file:
easyvpshost.com/100mb.bin
I have been working on this site only 1 hour so it is not finished. I just seem to be having really slow connection issues and want to verify this as my computer probably only has 1gb space left from the 300gb space I used so this could be causing the problem.
I recently swithced to HostGator.com Shared. I may need to go back to LunarPages.
Please visit the site below....
Home
Also, if you are encountering layout errors please let me know what internet browser and version you are using.
As you can tell from the name it will be a new site, community and help forum dealing with ecommerce and small business!
I have a client in the US who uses FTP server based in The Planet datacenter. He complains that since several days he experiences a way low connection speed (just 5 kbytes/s), while the speed to other FTP servers is at average 75 kbytes/s. So th eproblem seems to be with this particular server.
However, I tried the speed from Ukraine (where I'm based in). It is at the level of 100 kbytes/s.
I have apf installed on my server and it looks likely be inreachable,
and i try to reboot the server,
after rebooting, i can not connect from my pc to it any more,
i go to console and test,the server can ping and traceroute the out servers,
i think the newwork is online and the afp black the coming connection.
i try to run "apf -f" to stop the apf,
and my friend can connect the server laster.
i think it may be because the apf black the out-coming connection,
now,i need to check why the apf black others and try to fix it and restart the aps,
can anyone teach me how can i do now?
my server os is centos
I want to make a PHP script to check the status of Internet Connection outside the LAN.
I was thinking of Google Ping, cause google's ping are fast and their robust network is never offline.
I am using their RVPS-3 plan (30$/mo, 1024 MB RAM, 40 GB drive, 500GB BW) and I am pretty unhappy about the connection and response speeds of their servers - especially during traffic peaks in the US. The server is sometimes so slow that I have to wait 5-10 seconds for a simple HTML page to load. :/
However the hardware itself works fine and for the money is IMO a very good deal. Also tech support is fine, I've had 3 requests so far and all were solved almost immediately (<20 mins). Although during the setup stage they changed the OS WITHOUT letting me know due to installation of an admin panel. They quickly changed it back when I asked them, but it's pretty strange anyway.
It really is a pity that the connection speed is so bad, because other than that I couldn't say a bad word about them. Now I have to consider moving somewhere else...
i want to know how much connection/session numbers to my server,
are there any method to get it?
a faster internet connection in our office here in San Diego, because we are going to run a few servers out of the office.
Currently we have DSL, but the upload speed inst cutting it, our current plan is:
Download: 1.5mbps
Upload: 512kbps
1 Dynamic IP
We are looking for something with the following:
Download: 1.5mbps or greater
Upload: 1.5mbps or greater
1 Static IP Address
Can anybody recommend any solutions in particular? Is t1 the only solution? We want to keep costs inline, and under $150 a month.
I have ftp server (pure-ftp). with firewall.
i allowed 20 and 21 port in "CSF" firewall
now when i or our client connect to the server connection done.
and the they fire dir or ls command they will receive error
"425 Could not open data connection to port 2535: Connection timed out"
what is the problem.i have already allowed passive port 2500:3500 then why i received this types of error
I am the server in my house and speed of communication server 2 MB per second Is this good speed Browsing
View 5 Replies View RelatedI have one client who cannot see my server and all domains on it. I;ve checked if his IP is block or not and I didn't see his IP on the apf deny host file. How to you check IP if it can see my server? I just want to make sure before calling the ISP.
View 3 Replies View RelatedWhat is the best way to test the speed of a server?
CPU/processing wise, and not bandwidth wise?
I've two shared hosting accounts, one is hostgator and other is godaddy.
I've uploaded a file (.flv) on hostgator and same file on godaddy.
here a link to both
Hostgator flv
Goddady flv
Now i am use a Download manager " free download manager" to download files
The hostgator file downloads at 17-35kb/s
The godaddy file downloads at 200kb/s
I am using 2Mbps dsl.
Also my hostgator cpanel loads slow. and other files are downloads at very low max 40kb/s.
What are the issues. I've contacted hostgator support and they say that every thing is ok on their end.
I have to stream videos on hostgator but the speed is too slow. and it buffers alot.
What would be best method to test quality of server?For example,how site loads,do they load at all,speed of loading,etc.
What bothers me some of my site which i host on my servers start to lose traffic a lot lately.It could be beacuse of summer slowdown,but i simply cant belive in that.
Maybe server have a downtime or server have bad hardware router which doesnt accept all traffic.In shortly i belive something is wrong.So please tell me how do i do deep scan/check of all my servers.
[url]
This has happend before when server hit 4 mb/s i saw straight line on mrtg for 20 min.
I email the support but they said they do not cap anyone.
Anyway to check my server really isnt capped?
server is on 100 mbps port. Bandwidth not shared.
I want to know how the speed compares between a single X3320 against a server with duel E5310 in it?
I have been told they should be about the same, or is the newer single x3320 faster?
the speed of FTP access to the server is acceptable, if I surf the website on the server by ip address, the speed is also acceptable however, if I surf the website on the server by domain, the speed is really slow.
View 7 Replies View Relatedway to test the speed of your web host? If the answer is ping, what is a good response time to look for?
View 7 Replies View RelatedThere use to be a thread on here but because of the wht hack, it didn't get saved...so now I can't go back to it.
It was a command in ssh that printed out a number of connections. Like 12,000 or something.
What is the best way to check the HDD on new Dedicated server?
I would like to see if there is a bad sectors, etc.
fsck? or ? what is the full command that would do the job the best.
OS is Centos.
How can check server for dos/ddos/syn attack?
Because my server load is high, perfromance is low, but i dont have any high process.
I'm not sure where to ask this but probably this section is the closest. I'm sorry if I use the wrong section.
Anyway I was wondering about checking using a reverse ip address tool which is available for free on the internet.
It seems that anyone can just check other domains which share the same IP address on a server.
However, I have a question.
Is it possible for anyone to check other domains which have different and unique IP addresses (for each domain) BUT all reside on a same server?
(meaning the person who is searching this only checks using one IP address/domain name to find out other domain names that reside on the SAME server)
Is there a 'free tool' out there that is capable of checking this?