SSL Cert Doesn't Work On IE
Apr 20, 2007
I ordered a RapidSSL (also called QuickSSL) cert from RapdiSSL.com (GeoTrust) to test out an email service. It works on firefox, but not in any version of IE I have on my two computers at home, a PC and a laptop running 6.0sp2 and 7.0 respectively.
When I raised a trouble ticket, Geotrust responded with a ppt attachment that clearly shows the cert working for the domain in IE. I have no reason to doubt them, but I replied with a ppt of my own showing the cert not working and am waiting for their reply.
Is it possible for a cert not to work on a specific browser like this? When I asked my email service provider, they said the following:
Quote:
Hello,
This indicates a problem with the SSL certificate that was installed. Possibly, an intermediate certificate issued by your certificate authority is need to be installed in addition to the one you gave us to enable Internet Explorer to fully trust your certificate and show the secure site.
Note for example that the only difference between going to
[url]and [url] is the certificate in use ... the same server and software with the same settings is used in both cases. I recommend going back to Geotrust and ask if there is a Geotrust Intermediate certificate that should be installed in addition to your issued certificate."
The domain is CNAMED to their server so that the app looks as if it is being run off my domain. I don't think there is anything non-standard about this because LuxSci is a topnotch provider and this is how they enable their clients to run private label services.
View 2 Replies
ADVERTISEMENT
Mar 11, 2007
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
View 2 Replies
View Related
May 9, 2007
I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
View 0 Replies
View Related
Dec 30, 2007
im using centos and a perl script doesnt seem to work on my system.
it gives an error on this line.
use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");
BEGIN failed--compilation aborted at line 8.
is it a problem with my perl or is it an error with the script?
View 6 Replies
View Related
Oct 30, 2008
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
View 0 Replies
View Related
Nov 14, 2007
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245
Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
View 1 Replies
View Related
Sep 13, 2007
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
Please help me out with this as soon as possible.
View 3 Replies
View Related
Mar 28, 2009
As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.
Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.
View 14 Replies
View Related
Jan 28, 2009
so for over 3 weeks now pc-core.net had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.
they told me to email cshelpdesk.com to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.
is there anything i can do? im basically just being ignored and they dont even have a number to them.
View 12 Replies
View Related
Mar 23, 2009
my forum is VB and its doesnt sent any email for users!
i check the options and everything looks fine ..
my vps had csf firewall installed ..
the csf.conf is
# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).
# Allow incoming TCP ports
TCP_IN = "53,1116,80"
# Allow outgoing TCP ports
TCP_OUT = "53,80,3306,1116"
# Allow incoming UDP ports
UDP_IN = "1116,53"
# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "53,1116"
# Allow incoming PING
ICMP_IN = "0"
# Set the per IP address incoming ICMP packet rate
# To disable rate limiting set to "0"
ICMP_IN_RATE = "1/s"
# Allow outgoing PING
ICMP_OUT = "1"
# Set the per IP address outgoing ICMP packet rate
# To disable rate limiting set to "0"
ICMP_OUT_RATE = "1/s"
and the version of csf is
[root@www csf]# /usr/sbin/csf -v
csf: v4.56 (generic)
[root@www csf]#
am useing centOS5 and ssh port 1116
am not useing any of control panel or ftp ...
the email i configured it with google.com/a services ..
View 12 Replies
View Related
Jun 17, 2008
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]
We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd
tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
Connected to ks357687.kimsufi.com.
Escape character is'^]'.
Get
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<hr>
<address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop
Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused
View 9 Replies
View Related
Jun 15, 2007
I am using Windows 2003 Enterprise Edition SP1 and i have recently set the computer up to 4GB RAM. I notice a problem occur error :
When I start the computer, Bios detected all 4GB Ram. However, i have checked Total physical memory in General (My Computer-> Properties) doesnot detect all 4GB Ram. it only detect 3GB Ram.
I have checked that this OS support up to 32GB . Why it doesn't detect all 4GB ?
What happen to it?
Mainboard : Intel chipset 915GL
I did following the instruction in internet (exactly is Microsoft) is /PAE in boot.ini file. But, it doesnt work.
View 8 Replies
View Related
Sep 26, 2007
Yesterday we registerd and created 2 domains in our server.
Everything is ok, files uploaded, dns zones created, httpd virtual host created...
The problem is that trying to browse the site trough http://www.site.com redirects me to [url] my main server IP address, this page shows a cPanel Welcome message.
But, using [url], the site is loaded ok, withouth any problems.
DNS zone shows:
Code:
; cPanel 11.11.0-BETA_16977
; Zone file for site.com
$TTL 14400
@ 86400 IN SOA mydns1.wolo.com. admin.hostingserver.com. (
2007092601 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds
site.com. 86400 IN NS mydns1.wolo.com.
site.com. 86400 IN NS mydns2.wolo.com.
site.com. IN A IP_ADDRESS
localhost.site.com. IN A 127.0.0.1
site.com. IN MX 0 site.com.
mail IN CNAME site.com.
www IN A IP_ADDRESS
ftp IN A IP_ADDRESS
Apache virtual host code
Code:
<VirtualHost IP_ADDRESS>
ServerAlias www.site.com
ServerAdmin webmaster@site.com
DocumentRoot /home/siteuser/public_html
ServerName site.com
<IfModule mod_suphp.c>
suPHP_UserGroup siteuser siteuser
</IfModule>
<IfModule mod_php4.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
<IfModule mod_php5.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
User siteuser
Group siteuser
BytesLog /usr/local/apache/domlogs/site.com-bytes_log
CustomLog /usr/local/apache/domlogs/site.com combined
Options -ExecCGI -Includes
</VirtualHost>
View 14 Replies
View Related
Jun 26, 2007
The email of my client doesnt receive certain emails from certain accounts, including my yahoo.com.ph account. After several tries I received this error instead.
After trying to send mail unsuccedfully several times, this is the error I am getting.
Hi. This is the qmail-send program at yahoo.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
:
Sorry, I couldn't find any host by that name. (#4.1.2)
I'm not going to try again; this message has been in the queue too
long.
--- Below this line is a copy of the message.
Quote:
Originally Posted by copy of email
Return-Path:
Received: (qmail 90296 invoked by uid 60001); 25 Jun 2007 04:05:27
-0000
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
h=X-YMail-OSG:Receivedate:Fromubject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID;
b=GYMZ4utbLEJMc+EXHdW5Ng5ZJeCArXAubpEaUtZzZz77STh9HAGNhrFDjgfqNJ5BdE/
SAlCQ78wseeWPTqUFlalE246OSls0L2tnadTvmxHAQiALfIJ/efHw980subD/VVk6c3NZXGKaKn3vQwJ57bHW5a6qsWjazjl6BXp5Q20=;
X-YMail-OSG:
1iaqBZkVM1mfqTKSQPqhJwf61.zXtBuozzwn.p275yXXF_KgFA8taeSyThc.P1xawEKTuVIB
Vgxk18AHBp_TxSZD753CsOSTbU56JD1OgWwBl8GCwZNxI6YhJHPfyg--
Received: from [203.177.91.252] by web32604.mail.mud.yahoo.com via
HTTP; Sun, 24 Jun 2007 21:05:26 PDT
Date: Sun, 24 Jun 2007 21:05:26 -0700 (PDT)
From: *********
Subject: test
To: sales@*********.com
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="0-357102911-1182744326=:89673"
Content-Transfer-Encoding: 8bit
Message-ID: <979097.89673.qm@web32604.mail.mud.yahoo.com>
--0-357102911-1182744326=:89673
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
test
View 4 Replies
View Related
Mar 11, 2007
Have been given a task where I am not familiar at all..
Task I have been given is to 1. implement mod_ssl in apache 2.2.4
2. create ssl cert for mail server
3. create ssl cert for Terminal Server
Now the problem is am unsure when I create these crt files and keys should I enable a pass phrase or not?? Am using openssl and the documentation states if it is a server certificate then maybe better not to have a passphrase..
Initially I thought I dont want the user when they check there mail to have to authenticate their mail account and also the passphrase for the cert and same for the TS users but am unsure of the meaning and usage of the passphrase.
View 0 Replies
View Related
Jan 15, 2007
for my online service. Do i spend the money for the special ssl cert that makes the ie7 bar green or a normal ssl cert?
Been thinking about getting an account on resellerclub for $200 and selling a cert to myself. Their other stuff might be helpful too. sounds like a plan?
View 1 Replies
View Related
Jul 12, 2008
Have anybody got their SSL from ipsCA, certs.ipsca.com ?
The ssl seem to be fully validated for only $38, and both firefox and IE recognized it.
Their partner program look nice,but i did not hear anything after contacting their email. Is there anyone here is their partner?
View 8 Replies
View Related
Oct 20, 2007
I'm interesting to start with use of SSL cert.
First use is for any customer that have protected area and would have more security of data sent.
Have you any suggest for start, any link to help/faq and rapid how to?
View 14 Replies
View Related
May 11, 2007
user of shared SSL and trying to use my hosts shared SSL cert to process the form opened from a menu link. The form opens OK using href=[url] on the test page, but when I submit the form using the action=[url] I get a IE cannot display this webpage error.
The host says:
The way you are using our shared SSL is correct. Still there is lot of scripts in the /home/blah-blah/public_html/staging, calling the link [url], which in turn gives error. This means that the scripts do not work on our shared SSL. It seems you need a separate SSL installed for your domain for the scripts to work properly.
Should it matter how many scripts (I assume he means php scripts) there are in the /staging area?
Is there another way to securely send this form to the server for processing? Do I need a cert for this domain to make this work? I've seen threads on this topic in other forums but the discussion level was between experienced developers, not a beginner like me. I would appreciate a do this not that kind of answer if possible.
View 4 Replies
View Related
Mar 29, 2007
Where can I buy cheap wildcard ssl certificates?
View 4 Replies
View Related
May 22, 2007
I had to reinstall a Verisign cert last week. After cleaning out a mess of old certs, keys and csr's I finally got the thing to install properly.
However, I get a "Website Certified by an Unknown Authority Error in Firefox".
Everything including the intermediate crt is installed correctly as far as I can tell and I get no error in any version of IE.
Here from the httpd.comf file:
Code:
<IfDefine SSL>
<VirtualHost IPADDRESS:443>
DocumentRoot /home/myuser/public_html
ServerName www.mysite.com
UserDir public_html
User myuser
Group mygroup
ScriptAlias /cgi-bin/ /home/myuser/public_html/cgi-bin/
SSLEnable
SSLCertificateFile /usr/share/ssl/certs/www.mysite.com.crt
SSLCertificateKeyFile /usr/share/ssl/private/www.mysite.com.key
SSLCACertificateFile /usr/share/ssl/certs/www.mysite.com.cabundle
SSLLogFile /usr/local/apache/domlogs/www.mysite.com-ssl_data_log
CustomLog /usr/local/apache/domlogs/www.mysite.com-ssl_log combined
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
</VirtualHost>
</IfDefine>
The key matches the cert, and the cabundle is directly from Verisign.
Has anyone had a similar problem with getting a Verisign or other intermediate cert to work properly? I've reissued the thing twice and so far nothing has changed. It's like the intermediate cert isn't being sent even though it is installed.
When viewing the cert in firefox the Certificate Hierarchy only shows my domain. In internet explorer is shows Verisign Class 3 Public Primary CA -> Verisign Class 3 Secure Server CA -> My domain.
View 1 Replies
View Related
Jun 27, 2008
to upload some flash videos over to our web host.
All the videos have been uploaded to << link removed >> and in there you will seea flash_video directory, in there should be a html file where you can double click and watch the flash video.
Now go ahead and try it, click on the HTML file and click CONTINUE and try clicking on MODULE 1.. You will see a video play to the left but on the right are bunch of POWERPOINT slides that will appear as the guy continues to speak. THAT DOESNT SHOW..
Our website is hosted by xo.com
Dont know much about the plan since its my 2nd day at the job..
But here is the weird part,
i have uploaded the samething - same exact way to another web host and it plays fine, the PPTs show up fine..
What do you guys think it is?
Before someone asks about uploading methods, i tried filezilla, coreftp and cuteFTP using both ASCII and binary methods. Samething..
View 10 Replies
View Related
Nov 4, 2007
If I get an SSL certificate from one SSL provider and then decide to go with another provider for the same subdomain, do I have to get the first one revoked or simply replace the old with the new?
View 5 Replies
View Related
Sep 2, 2007
As many Reseller Hosts offer shared certificates as a feature, and many resellers have small-business clients who make good use of this, is anyone else finding it a major problem where visitors using IE7 get an error message for pages using the shared certifcates?
Quote:
There is a problem with this website's security certificate.
The security certificate presented by this website was not issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue to this website....
As a layperson visitor seeing that, I would not even think of using the link they offer to "continue" anyway. It scares customers off. I asked my Host about it and he said that it is beause all the shared SSL's are self-signed certifcates, so they do incur that error.
How are others dealing with it? No other option but to advise the client to get their own certificate?
Are there resellers that do NOT have this problem with their shared certs?
View 11 Replies
View Related
Sep 23, 2014
So after the palaver yesterday, I managed to remove everything to a degree enough to reinstall Plesk. I'm still having quite a few issues but at least the websites are up and running again.
One of the more important ones is SSL certificates. Apparently they still exist somewhere, but they're not showing up in Plesk.
I tried doing /usr/local/psa/bin/certificate -l -domain <domain>, however that returns:
PHP Notice: Undefined index: CSR; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
Error occured while sending feedback. HTTP code returned: 502
PHP Notice: Undefined index: Priv; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
[Code] .....
View 1 Replies
View Related
Jan 16, 2015
how/where can i change this ? DB, File ? Or impossible ?
Or have i create my own one and then to import it ?
View 4 Replies
View Related
Jun 9, 2015
I have a valid cert installed for a particular domain on my plesk server. I would like to take that cert info and export it to a valid PKCS12.
I was looking for the actual cert or pem files on the server but couldn't find them. Should i just copy all of the cert information to text files and create a pkcs12 via command line?
View 1 Replies
View Related
Dec 15, 2014
Currently i'm running a server with 12 customers on it. They all have their own domainnames and subscriptions. One of them wants to secure his site with SSL and also his mail traffic. Currently he is using the mail.hisdomain.com server for receiving/sending e-mail. I want to install a certificate so that domain is secured. How can i accomplish this?
When i look on the server there is only 1 PEM file for the whole server. If i'm going to install his KEY and CRT in that file than all my clients will use that certifcate right? Can i make it so that only his domain uses thoses certifcates? Plesk is configured to use Postfix with Courier.
View 1 Replies
View Related
