I am running a small hosting operation and would like to know more about SPAM filtering and controlling. SpamAssasin is installed on my server but it does not do much. I was looking into different solution with a anti-spam device and would like to know which one is recommended the most: sonicwall, barracuda or symantec? (total email addresses is less than at thousand)
View 4 Repliesswitched to ipower.com and not getting any help - really stuck as my customer wanted better spam filtering so I went to them on a recommendation and I do not know how to turn on and what is the best setting for spam filtering with their panel. Also using HORDE where I can set a filter using rules but it only works if I log on and hit apply filter so my customer still gets it in his in box -
View 2 Replies View RelatedAs a web host or ISP what do you think is best to do? do spam/virus filtering, or don't touch mail and let the user do what they want with it? (no chance of false positives, or lost mail, this way)
I work for an ISP and we have a barracuda and we get tons of calls from customers regarding lost mail and such as when you're filtering such a large varitey of mail its very hard to have a "perfect" filter. Mail that a car dealership gets and what a hospital get is totally different, for example.
Also in terms of web hosting the filtering will put a reasonable load on the server during peak spamming hours.
So just curious, as a ISP/webhost customer do you think your host should do filter or do you rather manage that yourself?
We have identified that messages from your IP are being filtered based on the recommendations of the Symantec Brightmail filter as well as our internal Smart Screen Filters. The filter was initiated by Hotmail at (5/20/2009 12:00:00 AM) PST due to a large volume of emails that were sent prior to this time.
We will be happy to work directly with Symantec on your behalf to investigate and possibly resolve this problem. In order to move forward, we will need examples of the messages that were caught by the Brightmail filters.
How much CPU & RAM load does your spam filter put on your VPS? It seems logical that the more mailboxes hosted, the more VPS resources the spam filter will consume - especially if any of the email addresses are targeted by spammers (or the user is careless and gives out their email address everywhere - as many do).
It's become so much with some of our subscribers that we have had to offer a hardware spam filter, to keep the load off the VPS. It's been great in that the VPS's protected by it have seen a dramatic performance increase....but are these subscribers unique in some way?
And so here is my question...how much CPU is everyone's spam assassin/spam filter using and how many mailboxes do you host on your VPS? very curious...
Anyone else have problems with Yahoo Spam filters being overzealous? I recently setup a new domain and a few email accounts. After sending a few test messages to my Yahoo email, each one of them was flagged as spam. I changed the text to a more regular email, with no controversial words and still the same result. I notice that Yahoo regularly traps some newsletters I subscribe to in my spam filter, but rarely, if ever legitimate emails. I checked with my web host who informed me they are not on any spam blacklists and that I would have to contact Yahoo. Yahoo's help is quite a maze (designed to make you lose interest and move on), so before I continue hunting for how to contact Y!, I thought I would come here to see if this is a common problem (with a common fix).
View 1 Replies View RelatedI'm wondering if theres anything I can install on the server that will either filter or track outgoing spam. I don't want to limit the number of emails sent per hour or anything, I just want to be able to maybe search through some flagged emails or something. Or if they send the exact same email more than x times it can disable their account... I'm not sure
View 1 Replies View RelatedI just found out all my mails sent to Gmail are marked as spam. However, if I check my IP address in independant grass-root spam databases, my IP address isn't blacklisted. I checked 7 of them. Do you know how to solve this problem
View 6 Replies View Relatedi was wondering if there is any other free anti-spam filter other than Spam Assassin that can be used on a VPS account?
View 13 Replies View RelatedA few months before I updated to Plesk 12 I noticed a huge jump in uncaught spam - I hoped the update to Plesk 12 might solve this but no luck.
I have now changed the spam sensitivity on my account 1, the idea being I would then whitelist the domains I want to get through but literally nothing is getting marked as spam. Users on other domains on the same server are reporting the same.
I'm using the following blacklist database lists:
zen.spamhaus.org;dnsbl.dronebl.org;bl.spameatingmonkey.net;psbl.surriel.com;b.barracudacentral.org
I have Plesk SpamAssassin 3.3.2 installed and set as the Spam handler.
I am happily running Plesk 11.5; with just one small but annoying persistent problem:
I have Clients with large mailinglistes
- SpamAssassin
- Server-wide greylisting
- DNSBL
is running.
But apparently many of the lists mail addresses have been harvested over the years. And as there is no easy way to use SA in mailman, I am down to greylisting only for list addresses.
This results in insanely large amounts of SPAM (-> moderation requests) on the client's lists. Is this behavior improved in Plesk 12?
Or can probably SIEVE filters work here - are those available to mailman? (probably not as they work in Dovecot?)
Almost all mail adresses on my server is getting a spam mail from same mail marketing company everyday and i want to block them... Normally i just add the mail address to blacklist from "Spam Filter Settings" but this company is opening new addresses everyday and it is impossible to add all of them to blacklist so i need adding it as a regex to the blacklist...
The company i am talking about is opening mail addresses every day like below...
nrt150401@hotmail.com
nrt150402@gmail.com
nrt150403@yandex.com
nrt150404@mynet.com
As you can see all mail addresses begin with "nrt"+"6 digits of day"+"free mail provider", so right now i am using the regex below and it is already added to the blacklist but they are still able to send me... What can i do now?
I can only add 100 addresses to the global address spam white list. I need to add more!
View 1 Replies View Relatedwhen im trying to enable spam filter for a particular email account i get this mysql error:
Error: SQLSTATE[23000]: Integrity constraint violation: 1062 Duplicate entry 'xxxx@domain.com' for key 3 (mail id i hid it for security reasons xxxx@domain.com)..
i searchd in the psa database but could not find any duplication...
I have a (dedicated) server out of control. It is managed by a 3rd party company who has never been able to get the spam and server load under control. Loads average over 5! and there is no activity in top other than sendmail and mailscanner (with Ensim).
I turned off mailscanner and sendmail while I typed this and server load went to .08.
I'm going to switch (dedicated) servers to a new provider (for reasons above plus a few others) which will include managed service from the server provider as well.
There are only a few programs that need to run on this server. VBulletin is the main concern.
I want to lock down all mail access. I want vbulletin to be able to send outgoing email as part of its administration and as part of its member notifications.
I don't want ANYONE OUTSIDE THE SERVER to be able to send mail through this server.
One idea I have had is to use DNS to assign all MX records of every domain on the machine to the free gmail service.
I have one domain on this machine (and important domain) that gets thousands and thousands of spam. I assigned its' MX records to NO-IP.com who filters and forwards email to me. That has worked - but server load never budged.
Microsoft Windows Server 2008 R2 Service Pack 1
Panel version 11.0.9 Update #59, last updated at Oct 3, 2013 02:06 AM
MailEnable version 5
I see in the plesk documentation that the screen to enable SPAM filtering for an individual there is an option to "Move spam to the Spam folder". I don't see that option so I am wondering if it is only available on some versions of Plesk, or in combination with certain mail servers. How to make that option available?
I would like to know how to filter more than one NIC with APF firewall... at the moment, it only let you filter Eth0, how do I add Eth1 in it as well?
View 7 Replies View RelatedI am getting a VPS and the only mail filter option available with this company is SpamAssassin.
Is Spam Assassin's version 3.2.x sufficient to block majority of Spam/Junk emails?
I sent the below email, it keeps getting caught in the filter
Quote:
Maria,
Here are the username and password for this site.
www.consumerreports.com [url]
user:
pass:
Maybe you can find some more info about the cars you like.
Thanks,
Matthew
Sitebuilder Specialist
[800.729.xxxx ext xxx] or [xxx.625.8546]
email malberty@domain.com
www.anotherdomain.com
Support Contact for any Stewart Related Website:
[url]<[url]
The exim logs show this:
2007-03-04 21:02:53 1HO3TR-0003tu-Ek <= matthew@localdomain.com H=(localhost) [127.0.0.1]:43496 I=[127.0.0.1]:25 P=esmtpa A=fixed_login:matthew@localdomain.com S=1527 id=9bb87bf2893bf84500323930692044ef@localhost T="test" from <matthew@localdomain.com> for matthew@localdomain.com
2007-03-04 21:02:53 cwd=/var/spool/exim 3 args: /usr/sbin/exim -Mc 1HO3TR-0003tu-Ek
2007-03-04 21:02:53 1HO3TR-0003tu-Ek => discarded (system filter)
2007-03-04 21:02:53 1HO3TR-0003tu-Ek Completed QT=0s
2007-03-04 21:02:53 SMTP connection from (localhost) [127.0.0.1]:43496 I=[127.0.0.1]:25 lost
I cannot figure out why the filters is picking this up, nor which WORD is causing this. How would I trace this?
my antivirus.exim file
Code:
# Exim filter
## Version: 0.17
#$Id: system_filter.exim,v 1.11 2001/09/19 11:27:56 nigel Exp $
## Exim system filter to refuse potentially harmful payloads in
## mail messages
## (c) 2000-2001 Nigel Metheringham <nigel@exim.org>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
## -A copy of the GNU General Public License is distributed with exim itself
## -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
## If you haven't worked with exim filters before, read
## the install notes at the end of this file.
## The install notes are not a replacement for the exim documentation
## -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
## -----------------------------------------------------------------------
# Only run any of this stuff on the first pass through the
# filter - this is an optomisation for messages that get
# queued and have several delivery attempts
#
# we express this in reverse so we can just bail out
# on inappropriate messages
#
if not first_delivery
then
finish
endif
## -----------------------------------------------------------------------
# Check for MS buffer overruns as per BUGTRAQ.
# [url]
# This could happen in error messages, hence its placing
# here...
# We substract the first n characters of the date header
# and test if its the same as the date header... which
# is a lousy way of checking if the date is longer than
# n chars long
if ${length_80:$header_date:} is not $header_date:
then
fail text "This message has been rejected because it has
an overlength date field which can be used
to subvert Microsoft mail programs
The following URL has further information
[url]
seen finish
endif
## -----------------------------------------------------------------------
# These messages are now being sent with a <> envelope sender, but
# blocking all error messages that pattern match prevents
# bounces getting back.... so we fudge it somewhat and check for known
# header signatures. Other bounces are allowed through.
if $header_from: contains "@sexyfun.net"
then
fail text "This message has been rejected since it has
the signature of a known virus in the header."
seen finish
endif
if error_message and $header_from: contains "Mailer-Daemon@"
then
# looks like a real error message - just ignore it
finish
endif
## -----------------------------------------------------------------------
# Look for single part MIME messages with suspicious name extensions
# Check Content-Type header using quoted filename [content_type_quoted_fn_match]
if $header_content-type: matches "(?:file)?name=("[^"]+\.(?:ad[ep]|ba[st]|chm|cmd|com|cpl|crt|eml|exe|hlp|hta|in[fs]|isp|jse?|lnk|md[be]|ms[cipt]|pcd|pif|reg|scr|sct|shs|url|vb[se]|ws[fhc])")"
then
fail text "This message has been rejected because it has
potentially executable content $1
This form of attachment has been used by
recent viruses or other malware.
If you meant to send this file then please
package it up as a zip file and resend it."
seen finish
endif
# same again using unquoted filename [content_type_unquoted_fn_match]
if $header_content-type: matches "(?:file)?name=(\S+\.(?:ad[ep]|ba[st]|chm|cmd|com|cpl|crt|eml|exe|hlp|hta|in[fs]|isp|jse?|lnk|md[be]|ms[cipt]|pcd|pif|reg|scr|sct|shs|url|vb[se]|ws[fhc]))"
then
fail text "This message has been rejected because it has
potentially executable content $1
This form of attachment has been used by
recent viruses or other malware.
If you meant to send this file then please
package it up as a zip file and resend it."
seen finish
endif
## -----------------------------------------------------------------------
# Attempt to catch embedded VBS attachments
# in emails. These were used as the basis for
# the ILOVEYOU virus and its variants - many many varients
# Quoted filename - [body_quoted_fn_match]
if $message_body matches "(?:Content-(?:Type:(?>\s*)[\w-]+/[\w-]+|Disposition:(?>\s*)attachment);(?>\s*)(?:file)?name=|begin(?>\s+)[0-7]{3,4}(?>\s+))("[^"]+\.(?:ad[ep]|ba[st]|chm|cmd|com|cpl|crt|eml|exe|hlp|hta|in[fs]|isp|jse?|lnk|md[be]|ms[cipt]|pcd|pif|reg|scr|sct|shs|url|vb[se]|ws[fhc])")[\s;]"
then
fail text "This message has been rejected because it has
a potentially executable attachment $1
This form of attachment has been used by
recent viruses or other malware.
If you meant to send this file then please
package it up as a zip file and resend it."
seen finish
endif
# same again using unquoted filename [body_unquoted_fn_match]
if $message_body matches "(?:Content-(?:Type:(?>\s*)[\w-]+/[\w-]+|Disposition:(?>\s*)attachment);(?>\s*)(?:file)?name=|begin(?>\s+)[0-7]{3,4}(?>\s+))(\S+\.(?:ad[ep]|ba[st]|chm|cmd|com|cpl|crt|eml|exe|hlp|hta|in[fs]|isp|jse?|lnk|md[be]|ms[cipt]|pcd|pif|reg|scr|sct|shs|url|vb[se]|ws[fhc]))[\s;]"
then
fail text "This message has been rejected because it has
a potentially executable attachment $1
This form of attachment has been used by
recent viruses or other malware.
If you meant to send this file then please
package it up as a zip file and resend it."
seen finish
endif
## -----------------------------------------------------------------------
#### Version history
#
# 0.01 5 May 2000
#Initial release
# 0.02 8 May 2000
#Widened list of content-types accepted, added WSF extension
# 0.03 8 May 2000
#Embedded the install notes in for those that don't do manuals
# 0.04 9 May 2000
#Check global content-type header. Efficiency mods to REs
# 0.05 9 May 2000
#More minor efficiency mods, doc changes
# 0.06 20 June 2000
#Added extension handling - thx to Douglas Gray Stephens & Jeff Carnahan
# 0.07 19 July 2000
#Latest MS Outhouse bug catching
# 0.08 19 July 2000
#Changed trigger length to 80 chars, fixed some spelling
# 0.09 29 September 2000
#More extensions... its getting so we should just allow 2 or 3 through
# 0.10 18 January 2001
#Removed exclusion for error messages - this is a little nasty
#since it has other side effects, hence we do still exclude
#on unix like error messages
# 0.11 20 March, 2001
#Added CMD extension, tidied docs slightly, added RCS tag
#** Missed changing version number at top of file :-(
# 0.12 10 May, 2001
#Added HTA extension
# 0.13 22 May, 2001
#Reformatted regexps and code to build them so that they are
#shorter than the limits on pre exim 3.20 filters. This will
#make them significantly less efficient, but I am getting so
#many queries about this that requiring 3.2x appears unsupportable.
# 0.14 15 August,2001
#Added .lnk extension - most requested item :-)
#Reformatted everything so its now built from a set of short
#library files, cutting down on manual duplication.
#Changed w in filename detection to . - dodges locale problems
#Explicit application of GPL after queries on license status
# 0.15 17 August, 2001
#Changed the . in filename detect to S (stops it going mad)
# 0.16 19 September, 2001
#Pile of new extensions including the eml in current use
# 0.17 19 September, 2001
#Syntax fix
#
#### Install Notes
I want to filter any files uploaded and i have put this line at php.ini
suhosin.upload.verification_script = /my path
But my problem till now i can not make this script. (Disable upload php files)
I have A/B power from my colo provider, each fed from separate xxxKVA UPSes. I have dual-cord servers powered from these two circuits.
Now I'm adding an EMC SAN, which comes with its own little APC UPS. EMC says the SAN's A-side power should come from my A-side circuit, and the SAN's B-side power should come from the included little APC UPS, which should be plugged into my B-side circuit.
Unfortnately, the little UPS puts out lots of garbage line noise on the upstream side. I know this because I plugged it in at home, and it was turning my X10 light fixtures on and off when the battery would hit a charging cycle. This is not the kind of dirty power I'd like to be feeding to the servers.
Does anyone have a suggestion for cleaning up the harmonic distortion that these UPSes send back upstream? Maybe a Tripp Lite IBAR12/20ULTRA? Or a Tripp Lite IS-1000 Full Isolation Transformer?
Alternatively, if there is a way to tell the EMC SAN to enable write caching without the APC UPS, that might work, too.
I am on a DirectAdmin server, with root access. Exim mail server.
Is there any way to filter outgoing messages? Let's say if IP of client is listed in blacklist, they can not send out emails
I have the same problem as many other users who try to send to Hotmail.... my e-mails are being put into the junk filter.
Could you please help me with this as I am going mad trying to figure out how to fix this? I am running a VPS which has 4 IP's and whenever I send an e-mail from the domain it moves into the junk filter. E-mails are received correctly by other e-mail providers (Yahoo, etc.), only Hotmail has the issue.
When I do a DNS Report, the only error I get besides the mail server having a single point of failure, is "Mail server host name in greeting". I have had the VPS provider add a RDNS entry, etc.
I have spoken with the support team at the VPS Host and they have tried everything they could and can't understand why there is an issue. I also contacted Hotmail and they redirected me to a Junk Filter troubleshooting page [url]
I don't know why this is being filtered as Junk and what I can do to fix it. Could you please help as I would be most grateful.
Is someone able to PM me with help as I would prefer not to post the network/website details on the forum please?
After obtaining a new allocation from ARIN, how long do you typically wait before your upstreams update their filters to allow the new announcement? Which providers are most proactive? Least?
View 8 Replies View Relatedi try to make a email filter using cpanel options but dont work this its the code
Code:
if first_delivery
and ( ("$header_from:" contains "id@dominio.com")
or ("$header_from:" contains "id1@dominio.com")
or ("$header_from:" contains "id2@dominio.com")
)
then
unseen deliver "id3@dominio.com"
endif
and Also
Code:
if
$header_from: contains "id@dominio.com"
then
deliver "id3@dominio.com"
endif
the main idea its all outgoing mail from id@dominio.com must be
send a copy (bcc) to id3@dominio.com
I want to filter some keywords showing on the website.
For example,some adult keywords or some force keywords,I want apache change it to * or close the webpage.
I use cPanel/WHM but I find no place to do the setting.