switched to ipower.com and not getting any help - really stuck as my customer wanted better spam filtering so I went to them on a recommendation and I do not know how to turn on and what is the best setting for spam filtering with their panel. Also using HORDE where I can set a filter using rules but it only works if I log on and hit apply filter so my customer still gets it in his in box -
View 2 Replies
I am running a small hosting operation and would like to know more about SPAM filtering and controlling. SpamAssasin is installed on my server but it does not do much. I was looking into different solution with a anti-spam device and would like to know which one is recommended the most: sonicwall, barracuda or symantec? (total email addresses is less than at thousand)
View 4 Replies View RelatedI indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
A few months before I updated to Plesk 12 I noticed a huge jump in uncaught spam - I hoped the update to Plesk 12 might solve this but no luck.
I have now changed the spam sensitivity on my account 1, the idea being I would then whitelist the domains I want to get through but literally nothing is getting marked as spam. Users on other domains on the same server are reporting the same.
I'm using the following blacklist database lists:
zen.spamhaus.org;dnsbl.dronebl.org;bl.spameatingmonkey.net;psbl.surriel.com;b.barracudacentral.org
I have Plesk SpamAssassin 3.3.2 installed and set as the Spam handler.
I am happily running Plesk 11.5; with just one small but annoying persistent problem:
I have Clients with large mailinglistes
- SpamAssassin
- Server-wide greylisting
- DNSBL
is running.
But apparently many of the lists mail addresses have been harvested over the years. And as there is no easy way to use SA in mailman, I am down to greylisting only for list addresses.
This results in insanely large amounts of SPAM (-> moderation requests) on the client's lists. Is this behavior improved in Plesk 12?
Or can probably SIEVE filters work here - are those available to mailman? (probably not as they work in Dovecot?)
Almost all mail adresses on my server is getting a spam mail from same mail marketing company everyday and i want to block them... Normally i just add the mail address to blacklist from "Spam Filter Settings" but this company is opening new addresses everyday and it is impossible to add all of them to blacklist so i need adding it as a regex to the blacklist...
The company i am talking about is opening mail addresses every day like below...
nrt150401@hotmail.com
nrt150402@gmail.com
nrt150403@yandex.com
nrt150404@mynet.com
As you can see all mail addresses begin with "nrt"+"6 digits of day"+"free mail provider", so right now i am using the regex below and it is already added to the blacklist but they are still able to send me... What can i do now?
I can only add 100 addresses to the global address spam white list. I need to add more!
View 1 Replies View RelatedI asked my current vps supplier about changing the certificate used to secure the plesk control panel as the default one causes certificate warnings. Their response was "dont worry about the warnings, the control panel is secure and trying to address the error can cause problems in plesk itself".
Is this correct?, I know the cp is still secure but customers arent going to think ssl certificate warnings are OK. I think their response was more of we cant help you so dont worry about it type response (a.k.a the brush off)
Is this an issue with plesk? vps is windows server 2k3
after the login page, a blank page appears and I can't access to the Plesk Control Panel :
in the file : /var/log/sw-cp-server/error_log
2014/07/09 14:45:04 [error] 7422#0: *3551 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 91.204.25.4, server: , request: "GET /admin/ HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "91.204.25.4:8443", referrer: "https://91.204.25.4:8443/"
I Have a WinServer 2008R2SP1 with plesk 11. I am able to access to PControl panel with https://localhost:8443 but not from outside the server (https://serverIP:8443)
The firewall if OK, allowing port 8443.
I have 12 domains in my control panel but i only see 5 domains in my control panel but all 12 domains are working they are up but only see 5 in control panel....
View 7 Replies View RelatedIve bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..
when im trying to enable spam filter for a particular email account i get this mysql error:
Error: SQLSTATE[23000]: Integrity constraint violation: 1062 Duplicate entry 'xxxx@domain.com' for key 3 (mail id i hid it for security reasons xxxx@domain.com)..
i searchd in the psa database but could not find any duplication...
Currently we host a site constructor tool with a dedicated panel and we would like to add email hosting using PPA services.
We have already installed the system and customized the PPA panel which will be accessed by our panel.
We would like to know if it is possible to use Single Sign-On (SSO) access on some manner (with PPA API or other module), so our customers don't need to enter with user and password again to administrate their e-mail accounts.
I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
I've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View Relatedafter upgrading to plesk 11 i get this error (Image attached)
so basicaly i cant do nothing..
Plesk Panel 12.0.18 , cant load pages in controlpanel (web host edition) it is making timeout all the time and also cannot send mail (roundcube).
What have parallels done to the a nice panel!
Domains are not showing up in control panel but they are working...
View 1 Replies View RelatedMy Plesk installation and websites are slow
OVH VPS
8G ram
100 G Harddisk
I added a new domain to an existing subscription. I added the domain website as a forward to a domain that has frame forwarding to another domain.
When I go into domains, I can see the domain, but when I open it in control panel, I cannot find the domain.
I need to completely remove it at this point, but can find nowhere to make this happen.
I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)
I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....
Plesk Panel for Windows 11.5
Windows 2012
MailEnable 7.5
- Is it possible to secure webmail with SSL through the Plesk Control Panel?
- Is it possible to secure webmail per domain with SSL through the Plesk Control Panel?
I'm Unable to Login to Control Panel, this issue started few days back, in that time i'm using Plask v11.5, When i try to log in browser try to log in and few minutes after it showing Error 500, Application error, I try to run reconfigurator.exe to verify & fix the Plesk installation, everything updated fine but issues still exist today i decided to upgrade to v12 and i upgrade to V12, everything installed fine and but still login issues there.
This time whey i try to login, i'm not getting any error message, but after some time i got mail from the server "alarm level changed. Server health parameter "Services > Plesk CPU usage" changed its status from "green" to "red"."
I would like to know how to change http://mydomainname.com:8880 to http://mydomainname.com/somethingelse?
View 4 Replies View RelatedI am unable to log into the Plesk Control Panel.
After logging in, it appears that a sign-out request is executed. No error messages are shown.
Plesk: 12_0_18
We need to add visitor tracking code to the Control panel so we know who's using it and we can prompt inline chat etc. for support, but where to start.
The code is a mixture of Div tags and Java script.
How we can add this as there is no common footer file to drop the code in to.
I have been a solid cPanel / WHM user for the past 2 years, we have now since downsized our hosting requirements and also wanted to cut our panel costs and so we moved to PLESK 12 Web Edition.The server is on a trial license and has been working fine with no problems for the past 2 weeks. Today all of a sudden none of the websites are accessible, although I can ping all IP's on server and login via SSH.I cannot access any websites or hosting control panel, I have disabled IP tables as this was the cause of a problem last time.
Why this happened was there an update at around 5AM this morning which could have caused this?I have restarted the server, I can successfully ping / resolve address from SSH.
I purchased a Host license.Major customers in China. There is a facebook link in the panel.But China does not allow access facebook. This leads to a very slow access speed! Can I remove this link? If so, how to remove?
View 1 Replies View RelatedI have server with the Plesk control panel on Linux server and want to install ffmpeg but not sure about the steps to install it. Any script or easy steps to install ffmpeg on my server.
View 1 Replies View Related
