SOA (Start Of Authority) Record States That Your Master Server ...
Feb 28, 2008
when I run DNS report for some of domain of my it give few errors on
1)
SOA MNAME Check Your SOA (Start of Authority) record states that your
master(primary) server is: Fail
2)
Invalid characters Checks if MX records use valid host names, without any invalid characters. FAIL
how to fix this using WHM.
View 1 Replies
ADVERTISEMENT
Oct 24, 2014
How to get plesk (12) to set the SOA record properly on existing domains?
Let me explain the issue first. We use PowerDNS supermaster mode as slave servers. The way this works is we configure PowerDNS so that it sees the plesk server as a so called supermaster.
When a so called supermaster notifies the slave servers on a zone update, if it doesn't exist it just adds the zone and pulls it in. This works very nice and without any scripting required (there's only the issue of removing them, I just have a script that deletes all domains that haven't been able to update in 2 weeks every day from the database).
The only issue here is that BIND does *NOT* ever notify the nameserver listed in the SOA. The nameserver listed in the SOA should be the master (and hence - thus plesk itself) and it being a master it should be where the changes occur and notifying it isn't necessary thus, which is why BIND doesn't do that.
Unfortunately plesk doesn't seem to grasp this concept. It will happily put any nameserver in the SOA record. Have adjusted the template and it seems to work ok for new domains now (not sure how reliably though), but it's a major pain for the existing ones. It's very hard to update them properly.
Reapplying template -> no change to master NS/SOA
Switching mode to slave and back to master -> no change to master NS/SOA
Resetting to default -> no change to master NS/SOA
The only way I've found so far is to delete the records manually, add them again and hope it doesn't change the order (yes it does this a lot, you'll have the correct order listed, click apply and the order just changes. Some times it adds them to the bottom of the list, some times to the top - not confusing at all).
Plesk really should be taught that if it's master, it should be the one in the SOA. Whilst my issue is larger due to the supermaster and slaves not creating the zone (and hence my slave not functioning), it is an issue in any setup because a slave listed as SOA will not be notified and doesn't pick up on the changes right away. Depending on the refresh times it might take quite some time for the slave to pick up the change then, which isn't desirable either as it will leave you with a slave that still returns incorrect records.
View 6 Replies
View Related
Jul 12, 2015
Our partition become full and drop the vps, after that we are unable to start postifx, actually postfix start but master not.
So if I run :
/etc/init.d/postfix restart
Shutting down postfix: [FAILED]
Starting postfix: [ OK ]
/etc/init.d/postfix status
master is stopped
I already try to reconfigure all
/usr/local/psa/admin/bin/mailmng-service --start-service --mail-component=all
Into ToolsSettings i change between qmail and come back again to postfix (reinstalling)...
View 3 Replies
View Related
Mar 30, 2008
i need at least 2gb RAM and 2.4 ghz CPU and minimum 80gb disk
what us based host should i use?
it also needs to take backu of my files. ie 10gb..
it is so many host that i am just confused.
i have a budget of around 100$ but i can go down on the specs...
i currently have plesk but i might change. what control panel should i use?
View 11 Replies
View Related
Dec 11, 2008
Any Dedicated Servers within $50 to $80 price range? and where IRC is allowed. US or EU, whichever.
View 4 Replies
View Related
Dec 21, 2007
Is someone using Cloudmark Authority for Spamassassin?
http://www.cloudmark.com/serviceprov.../spamassassin/
If yes, what are your comments and what do you pay for this service?
View 11 Replies
View Related
Oct 6, 2013
I have to create a structure in which there is a client, a server and an authentication authority.
The authentication authority verifies the identity of both the client and server before they can communicate, so that the client can access the content offered by the server. Everything must be made using HTTP with SSL (HTTPS).
For now I have installed xampp on my pc with ubuntu, I performed the initial configuration and was able to view a test page locally hosted by entering the URL of the virtual server "www.server.it" (added to the configuration of apache2).
View 1 Replies
View Related
Sep 18, 2006
I want to know more about dns servers (master2slave), is there any tutorials how can I do that? I have 10 servers now, do I need to buy 2 more only for DNS?
View 6 Replies
View Related
Nov 26, 2014
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
View 4 Replies
View Related
Nov 15, 2008
Somebody told me that you can get better web hosting deals in the US as compared to the UK?
I guess with the weak pound this now is not the case!
View 7 Replies
View Related
Aug 29, 2008
i am having a problem getting a dedicated server running for Unreal Tournament GOTY. everytime i create a dedicated server i get this error in the console:
Log: AInternetLink Resolve failed: Can't find host master.mplayer.com (WSANO_DATA)
ScriptLog: UdpServerUplink: Failed to resolve master server address, aborting.
im running through a router.
View 4 Replies
View Related
Feb 11, 2007
I've been using FreeBSD for a while now, but I still feel like a novice when looking at top because I don't understand or know what all of the STATES mean. I know that many of them represent different kernal states and certain programs have their own unique STATES, but what do the usuals mean? man top only has 2-3 listed with very vague descriptions.
Does anyone here understand many of them? If so it would be greatly appreciated if you could write up a few of the basic ones.
select
nanslp
kserel
RUN
pause
lockf
kqread
sbwait
pipered
Those are the ones I currently see in top. I know there are probably thosands of others, but those are the ones I usally look at.
View 4 Replies
View Related
Nov 7, 2008
which is the United States hosts the largest number of companies
According to market share,which is the United States hosts the largest number of companies?
View 11 Replies
View Related
Feb 4, 2008
I have a questions for you other Canadians out there co-locating machines in the United States. How do you deal with shipping back servers to you that need repaired? I had to ship a server back to me via UPS recently and to my surprise it arrives to me with a $150 COD charge on it. I ended up talking to UPS and it ended up being $50 for brokerage fee's. But I'm wondering if there is any secret some of you are using to get the machines back without crazy border fee's? This is the first instance I've had to ship something back as the provider would not diagnose the machine on site or even help with shipping I had to go through UPS and then had to rely on the provider marking the right reason for shipping which they did not do.
View 11 Replies
View Related
Jun 24, 2008
I am pretty tired of the constant interference and harassment from competitors that is almost encouraged by rediculous US laws.
I would love to find reliable hosting and a honest registrar outside of the United States/Canada/EU.
My needs are somewhat simple - I have my own server at the Planet right now but a reliable (not oversold) VPS would suit me just fine.
Price is not a huge issue providing the fees are justified by the services received.
View 5 Replies
View Related
Jan 25, 2008
Which file do I need to open on a Unix server to add a PTR record? Sorry, I'm clueless about DNS but I think if I could find the file, I can add the PTR record by piecing together what I've found through searching the Internet.
View 4 Replies
View Related
Oct 27, 2009
I have been trying to run my emails accounts from my dedicated server, or just put the emails back to the go daddy secure server net. But I can get this right. Can someone help me? I am using the simple control panel. I went to use a dedicated server because this will give some freedom, but I just realize I may not be ready for this servers yet.
View 0 Replies
View Related
Apr 13, 2008
I am currently having a few technical difficulties with configuring my PLESK server to accept an A Record from another domain. Perhaps I have been going about this all wrong but I will explain what I am trying to do and how I have currently been trying to get it to work. Hopefully you might have a suggestion for me to try.
We currently run an On-Demand web design platform. This CMS can be completely rebranded for our Partners who can then sell this facility to their clients. There is only one installation of the code base but we need to give our partners a their own web address to access the cms.
For example:
cms.altstudio.com.au
cms.pcgraphicart.com.au
cms.pcgraphicart.com.au has been set up as a domain alias. The reason this is working is because the primary domain pcgraphicart.com.au is also hosted on this server.
So I thought if the partner has their domain delegated elsewhere then I could simply get them to create an A record for their chosen subdomain and point it to our IP address, then I could configure the domain alias again for their particular A record and hey presto. Unfortunately not so easy.
Here are two of the examples of what is happening
cms.newlight.com.au - their root domain is delegated elsewhere, but they have created an A-record for that subdomain and pointed it to 202.60.87.185. Now it reaches my server as I see a PLESK error page at that address.
At this stage I don't really know what to try to get PLESK to register that entry. I have created a domain alias for cms.newlight.com.au on the cms.altstudio.com.au account but it didn't pick things up.
Another example is cms.abconsulting.com.au
View 2 Replies
View Related
Nov 29, 2007
we have 2 server
on the first server we have setting 2 account
myaccont.com
and
my1.myaccount.com
are 2 difference account
Now, on the second server, we must config account
my2.myaccount.com
--
On the second server we have config my2.myaccount.com as account On the first server we have modify dns of domain myaccount.com with
my2.myaccount.com 14400 IN A xx.xx.xxx.xx
where xx is ip of second server
--
Seems work but there is any problem
For example ping to www.my2.myaccount.com give error, ping to my2.myaccount.com is ok..
Why?
View 5 Replies
View Related
Jul 30, 2009
i want to ask any any setting or script can help medo the purpose?
i hope i can set a cron to trace server load every five minutes,
and help me record the load number on a log file,
by the way,
i can trace the past load of my server when i need the data.
View 2 Replies
View Related
Nov 13, 2008
I run an online music archive site . Djs can upload their mixes to share and we also archive radio shows for people to listen back to.
Basically I was wondering if it would be possible to build a secondary server that could do this for me.
The secondary server could have multiple cast rippers running and could record internet radio shows, then once finished recording transfer it could send them over to my primary server to add to the website for people to download.
View 7 Replies
View Related
Nov 12, 2008
I was using dedicated server from ev1servers.net.
They are excellent. One of the feature .. unless I forgot was the ability to add our domain record to their DNS server by ourselves.
I think it was controlcommand, or commandcenter, or was it controlcentre , I forget.
This feature is very fascinating as I can make my site up and running within second.
[I know where to register domain with real time activation, and I have reseller account with WHM]
So everytime I have an idea of making a website. All of this cycle can be done within seconds , and my site is up and running. [register domain, create account in WHM, and populate the DNS record]
Anybody know any dedicated server provider which offering this kinda feature this day?
View 6 Replies
View Related
Jun 6, 2008
I have a dedicated server that is running apache and exim. While they're running from the same IP, I want the domain names to be www.mydomain.com for http and mail.mydomain.com for SMTP.
What I've done so far is set up A records for *.mydomain.com and mail.mydomain.com to point to the same IP address.
My MX record points to mail.mydomain.com.
My exim primary_hostname is configured as mail.mydomain.com.
Now I'm trying to get the PTR record set correctly so that outbound email doesnt get trapped by spam filters. So in this case should my PTR record point my IP to mail.mydomain.com and not mydomain.com or does it not matter?
Is it strange that an RDNS lookup to the primary IP would return my mail server like that?
View 2 Replies
View Related
Jul 10, 2008
somehow plesk is not listing a domain record I added recently, that I have to remove. so, I can't select it and delete it through the interface.
is there a way to remove a dns record manually, perhaps from the command line?
View 3 Replies
View Related
Apr 24, 2013
I have one domain who's not create dns in MS DNS server, i try create manuall but after this the record is missing, but on plesk showing, How to fix this ?
View 2 Replies
View Related
Oct 30, 2008
The MS DNS server in one of my Windows 2003 server does not start. When I try to start the server, I get the error Not enough storage available to complete this operation. I have enough of space and memory available in the server and all the other services are working fine. What could be the issue and what is the solution for this?
View 3 Replies
View Related
Jul 10, 2008
Scenario: I have a website, www.site.com, hosted on an ensim 4 box. The MX records for that zone point to google apps for mail services. Some of the alerting tools my client use are too stupid and don't support SSL or TLS, so they don't work with the pop/smtp services google apps uses.
Can I setup this ensim box to utilize it's smtp server to send mail as user@site.com even though the mail is hosted by google apps?
I guess it's kinda like e-mail spoofing.
View 2 Replies
View Related