Possible To Access Linux Drive From Windows

Jun 8, 2007

I have two servers with SoftLayer. One with cPanel and the other with Windows. The cPanel server has two drives with the second drive being used for backup purpose of all sites on the cPanel server.

Is there a way of accessing this drive from my Windows server so that I can also make backup images of Windows server on this drive directly?

View 5 Replies


ADVERTISEMENT

Unable To Access NTFS Hard Drive On Windows

Jun 15, 2008

We have a server with a hdd issue. It is showing up as drive O but we can not access it. It seems like the NTFS is corrupt or something. Windows does recgonise there is a drive and labels it but thats about it..how can we recover this?

View 2 Replies View Related

Mount Windows Drive In Linux, Bad Performance

Mar 8, 2008

Since my linux server is out of disk space, I just use cifs to mount some drives from the windows server for people to download files (usually 100-200mb/file).

But I found the performance is not good. For example, I need to wait for a long time before the download process begin. Also, it seems the load average of the server becomes high too.

Is there any suggestion? Should I mount the windows drives through cifs? Or should I change to another server which allow me to add more local harddisks? How about if I mount drives in other linux machine, will the performance better?

View 1 Replies View Related

How To Access 2nd Drive On Server

Mar 21, 2007

I am in the process of moving my dedicated server from one location to another. I have requested second drive to be installed on server. How do I access in through SSH? I am using Linux, FC4.

Also, what is the command to compress all data in certain directory, so that I can simply wget the large compressed file from the new server?

View 6 Replies View Related

Is It Possible To Access A Servers Hard Drive....

Feb 4, 2008

is it possible for me to access my servers hard drive in the same way I would with any other drive on my computer? Kind of like with ssh but in a file directory instead of a command line.

View 2 Replies View Related

Plesk 11.x / Windows :: How To Limit Access To Few IP Address To Access Port 8443 On Firewall

Aug 28, 2012

How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone

View 6 Replies View Related

Install Windows On Server Without CD Or Floppy Drive

May 22, 2007

I know this isn't really hosting related, but WHT has always given the best answers to questions.

Right here goes...

I have a new 1U server, which I ordered with no CD drive, as I have a little USB external DVD/CD which I would normally load the OS on.

However I have LOST IT !!!!

So I have been crawling the net for ways to install Windows XP (im just using XP for a very short time for testing!) from either a USB stick or by taking the hard drive out of the server, and copying the CD content onto it from a working windows computer.

View 1 Replies View Related

Plesk 12.x / Windows :: Out Of Space - How To Use Second Spare Drive

Jun 17, 2015

My server is gradually running out of space as my websites expand. I have a spare second drive - is it possible to reconfigure plesk to use this second drive ? I see I can use the plesk config tool - but looking at the documentation it moves all your sites over to the new drive which I don't want to do ?

View 1 Replies View Related

Remotely Kill/erase Windows Hard Drive

Aug 20, 2008

Any tools, programs that will execute either with windows on (remote desktop) or install a boot script that will wipe off the hard-drive without going to the datacenter?

This is for windows server 2003.

View 1 Replies View Related

Plesk 12.x / Windows :: Unable To Move Files To Another Drive?

Oct 12, 2014

I just recently created a new server with windows 2012 R2 server and need to move the mail and backups to another drive.

I have tried to run the Plesk reconfigurator as an Administrator and it comes up with the following error message see attached screenshot

View 3 Replies View Related

Windows 2003 Hard Drive / Folders Protection Password?

Oct 5, 2008

Anyone know a good program to let me put passwords from opening the hard drives via My Computer or especific folders, shortcuts, programs etc?

Lets per say someone got a hold of my Administrator password to have those important confidential files not to be seen a program like this would help. I am also going to set up that the server is only accessed from 2 secure locations just in case.

View 5 Replies View Related

Linux Setting Up Second Drive

Jun 28, 2007

I'm a little familiar with Linux, but I need help setting up a second drive that is in the server I'm leasing from Layered Technologies. It's a self-managed server so they won't even TELL me how to do it.

I need to format the drive and mount it as /backup so I can setup WHM/Cpanel to use it for backups.

What commands do I need to type to format the drive with the right kind of partition and mount it as /backup?

View 2 Replies View Related

Linux Hard Drive Recovery

Aug 2, 2008

I have my backup disks here because my server got hacked and we didn't like how liquidweb made the things. So we ask them to ship us the disk. They ran photorec and they got lots of .gz files from it. All accounts I would say. But 50% of them the .tar.gz files came corrupt. And is lefting all the big accounts and until now I haven't seen any corrupted file that came with MySQL. And I think MySQL is most important to all clients.

View 5 Replies View Related

Data Lost , But Still Have Old Home Drive , How To Copy To New Drive

Jan 26, 2007

1- i did Os Reload with new Hard drive for "home"
2- data "backups" drive lost

3- replaced the old home drive as "/old drive"

4- " /old drive " is now the secondry drive in my server and it has the all sites usres and evry thing

5- what i need , to trasfer, copy this sites from " /old drive " to "home"

but data center said

The /olddrive/home directory contains the contents that were previously in the /home directory. You can copy files from this directory to any other directory on your server.

The command to copy files in the UNIX environment is the "cp" command.

The user directories in /olddrive/home directory contain the web page files for the users. However, simply copying the contents over will not recreate the users or domain entries in DNS/httpd. If you wish these back you will need to recreate them manually or restore them from backups.

View 14 Replies View Related

Linux Server: Mapping Ftp Account As A Drive

Apr 9, 2007

any idea if this is possible? basically what i'd like to do is make a "virtual folder" in my linux box that is actually a connection to an ftp account on another server.

so for e.g. if i say cd /myftp it'll show the contents of that directory as though it was a standard folder, however it is actually connecting to some other machine via ftp?

View 2 Replies View Related

Mounting Drive Between Win-Linux (ntfs & Ext3)

Jul 25, 2007

I wanted to mount a Usb portable drive of some data I have inside my Linux server and make them read on my Windows xp.

The drive has been formatted as ext3 and it just won't show in "my computer" inside Windows unless I reformat it again as ntfs.

The same turns around if if I format as ntfs, and i can't mount it under linux with the message "mount: unknown file system type 'ntfs'"

View 4 Replies View Related

Plesk 11.x / Linux :: How To Backup To A Mounted Drive

Jul 4, 2014

My hosting company is offering to sell me backup space which will be mounted as a network location. e.g. /usr/local/backup

My question is how would I use this since Plesk seems to be configured either to use an FTP location or to use the server repository. Would I have to change the location of the server repository to this network location? This doesn't seem ideal.

Plesk 11.5 on CentOs 6.4

View 1 Replies View Related

Drive Corrupt, Recovery From 2nd Drive Mount

Feb 16, 2007

Primary drive (centos/cpanel) is corrupt

The server is displaying these errors when I tried to do an FSCK:
Bad inode IO
ext3-fs error (device(8,3)) IO Failure

I am having a new primary installed and old primary set as 2nd drive. I need to recover the cpanel domain accounts from this 2nd drive after I mount it with the method below:

mkdir /backup
mount /dev/sdb1 /backup

However, how do I actually recover these accounts in an automated process via whm? I've done this before with the same matter (corrupt primary drive, mount as 2nd, etc) but cannot exactly remember the proper steps.

View 14 Replies View Related

How To Copy My Current Drive Contents To A New Drive

Dec 28, 2007

I just purchased a brand new 10K 150GB drive. How can I take an exact copy of my current drive and transfer everything over to the new drive? I think I need to create a snapshop, or mirror it somehow.

What software will do this? I was told trueimage, but its very pricy, is there anything else?

View 8 Replies View Related

Plesk 12.x / Linux :: Setup Multi-server Hard Drive But On One Account

Oct 21, 2014

Not sure if I labeled that correctly, but I am looking to setup a multi-server where I offer a cloud ssd hosting plan, and sata hosting plan. The current setup has ssd hosting, but id like to add another ip address, as well as its hard drive to host other websites on that specific server, which is sata based.

For example, I add a domain to my plesk 12 admin account and choose the added Ip address (the sata based one), where it points to that server to access the files for that specific website.

At the moment, cloudflare handles all of my dns settings.. but I am totally lost on how this needs to be setup and if I am required to purchase another plesk license. I am trying to avoid purchasing another plesk license and having to setup a whole new plesk installation just to do this.. This is a vps by the way, not a dedicated server...

View 4 Replies View Related

Drive Corrupt - Should I Ask For New Drive Or Reimage

Jul 9, 2007

I have a dedicated box and I started getting Input/output errors today.

I tried:
# fsck
fsck 1.40-WIP (14-Nov-2006)
e2fsck 1.40-WIP (14-Nov-2006)
/dev/hda2: recovering journal
fsck.ext3: unable to set superblock flags on /dev/hda2

then I tried:
# fsck -a -t ext3 /dev/hda2
fsck 1.40-WIP (14-Nov-2006)
/dev/hda2: recovering journal
fsck.ext3: unable to set superblock flags on /dev/hda2

My data is backed up, so was going to ask for a reimage, but is this an indication of bad hardware? Should I ask for a replacement drive? Is there anything else I should try on my own before going to the host?

View 6 Replies View Related

Plesk 12.x / Windows :: Access Is Denied

Feb 15, 2015

in last two day we have problem with plesk on windows server 2008 r2 plesk version is 12.we have Access is denied error in some part of plesk like: can not add email address.can not edit email address..can not active on suspend domain..i Conant support team and they are solve problem but after on day. problem came back.in attachment i attach error log file and screenshot on errors.

View 3 Replies View Related

Plesk 11.x / Windows :: Unable To Access Webmail

Dec 23, 2013

I have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.

However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."

I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.

What must I do to enable webmail?

View 14 Replies View Related

Plesk 12.x / Windows :: Cannot Access Email / Webmail

Sep 20, 2014

i recently purchased a VPS Server from OVH, So far all is good with it, I have 4 domains parked off in a local South African Server that using DNS Records are pointing to the VPS Servers. The website etc is all displayed 100% so no issues there.My problem comes with email, Generally I use GMAIL to access all my emails using their POP3 and SMTP Feature by just putting in the details like how outlook is. Unfortunately it keeps on saying connection timed out and at times says another error to do with denying access.

So then I try accessing my email using the webmail interface, Im using mailenable and mailenable webmail, I cannot access the webmail through the panel neither can I access it using the link webmail.domain.com or webmail.domain.com/mewebmail/ as it gives the following error:

Service Unavailable: HTTP Error 503. The service is unavailable.

My setup for my emails is as follows: I have 4 domains (for example sake lets call it domain1, domain2, domain3, domain 4) now domain2,3 and 4 3 individual email addresses with no mailboxes as I set it up on plesk so that all email from there gets forwarded to main Domain calling it domain1. like info@domain1.com.In this way I do not have to open so many and all email found on one place. However I would like to make sure I can still send using the domain2 email address which logic tells me I should just need username password and the smtp settings.

But unfortunately even that when I want to set up on gmail or even outlook is giving me the same issues as mentioned above.!I googled and I looked through the forums about IIS application pool and restarting mailenable servers I did all of that but still the same error and issues, the domains have been propagated properly I waited 72hours just incase!

View 1 Replies View Related

Plesk 11.x / Windows :: Unable To Access Domain

Feb 11, 2014

I had used Panel version 11.5.30. I unable to access Hosting Services / Domains !

You can see this picture show about this case !

I don't know why this Panel error ???

View 2 Replies View Related

Cannot Access Windows 2003 Server From Network After Reboot

Jul 24, 2007

We are facing this weird problem from the past few days. Whenever we reboot the Windows 2003 Service, the server becomes inaccessible from the network or the internet after reboot. It is only after we run the sharedaccess.reg file available from http://windowsxp.mvps.org/reg/sharedaccess.reg and reboot the server, we can access the server remotely. But the same thing happens after rebooting the server again. We are also not able to start the Windows Firewall service. We get an error while trying to start the Windows Firewall Service. The screenshot of the error message is attached with this post.

View 3 Replies View Related

Plesk 11.x / Windows :: Control Panel Access IIS 7.0 WIN Web Server 2K

Jun 29, 2012

after upgrading to plesk 11 i get this error (Image attached)

so basicaly i cant do nothing..

View 3 Replies View Related

Plesk 12.x / Windows :: Receive Error Access Denied

Mar 16, 2015

A few day ago when i access Windows plesk i receive error Access Denied. [URL]..... Even i made these steps i still receiving Access Denied when i access. I tried use PLesk REconfigurator, put psaadm permissons on all C:, update plesk, windows and still having this issue.

View 3 Replies View Related

Plesk 12.x / Windows :: Setup FTP Access - Connecting To Server?

Sep 28, 2014

I setup FTP access on Plesk, then when i try connect to the server it seems to be trying to access through a old installation on FileZilla Beta server manager, that was obviously installed on the server a while back. I can only think it is not using which ever FTP manager Plesk uses.

View 2 Replies View Related

Plesk 12.x / Windows :: Operation Failed - Access Is Denied

Apr 6, 2015

Login Plesk 12 In Error :

Operation failed
The operation you were performing failed. You can retry the operation with or without changing its parameters. You may also want to report this problem to our support.

Error show :
Access is denied.
---------------------- Debug Info -------------------------------
Windows 2012 and Mssql 2012 .

View 4 Replies View Related

Plesk 12.x / Windows :: Getting Error When Try To Access To Domains In Specific Client

Dec 14, 2014

I migrate to 12.0.18 Actualización #28, última actualización Dic 11, 2014 02:12 PM.

When I try to Access to the domains in a specific client I´m geting this error:

Internal error: D:Plesk wes.escarmerieradomenech.com is out of webspace
MessageD:Plesk wes.escarmerieradomenech.com is out of webspace
File Webspace.php
Line401
TypePleskFatalException

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved