We have a server with a hdd issue. It is showing up as drive O but we can not access it. It seems like the NTFS is corrupt or something. Windows does recgonise there is a drive and labels it but thats about it..how can we recover this?
View 2 Repliesis it possible for me to access my servers hard drive in the same way I would with any other drive on my computer? Kind of like with ssh but in a file directory instead of a command line.
View 2 Replies View RelatedI wanted to mount a Usb portable drive of some data I have inside my Linux server and make them read on my Windows xp.
The drive has been formatted as ext3 and it just won't show in "my computer" inside Windows unless I reformat it again as ntfs.
The same turns around if if I format as ntfs, and i can't mount it under linux with the message "mount: unknown file system type 'ntfs'"
Any tools, programs that will execute either with windows on (remote desktop) or install a boot script that will wipe off the hard-drive without going to the datacenter?
This is for windows server 2003.
Anyone know a good program to let me put passwords from opening the hard drives via My Computer or especific folders, shortcuts, programs etc?
Lets per say someone got a hold of my Administrator password to have those important confidential files not to be seen a program like this would help. I am also going to set up that the server is only accessed from 2 secure locations just in case.
I just recently created a new server with windows 2012 R2 server and need to move the mail and backups to another drive.
I have tried to run the Plesk reconfigurator as an Administrator and it comes up with the following error message see attached screenshot
I have two servers with SoftLayer. One with cPanel and the other with Windows. The cPanel server has two drives with the second drive being used for backup purpose of all sites on the cPanel server.
Is there a way of accessing this drive from my Windows server so that I can also make backup images of Windows server on this drive directly?
I have enabled mail for himivest.com and can access my eMail via Opera Mail as a download.
However, I cannot access webmail. Typing "[uRL] ...." into the address bar of my browser (Chrome) results in the message "No input file specified."
I believe this is a PHP setup error. I have tried disabling / enabling PHP support for himivest (in accordance with [URL] .... ) but this had no effect.
What must I do to enable webmail?
I had used Panel version 11.5.30. I unable to access Hosting Services / Domains !
You can see this picture show about this case !
I don't know why this Panel error ???
We have Panel Plesk 11.5.30 in Windows 2008 R2. when you go to File Sharing in all the Subscriptions, appears this error: Internal error: Unable to access File Sharing repository with the system user name "admin": wrong username or password
This happen since we do the update to the new version 11.5.30 ...
how they sell those usb hard drives that connect to the computer that can hold like 100 gb's.....
well if i hook up one of those external hard drives to my server can i use it as webspace for users?
Now iam useing 320Gig SATA harddrive as my primary hard drive,i dont use 2rd harddrive,iam haveing pure download site,in TOP command 4.5%wa is this bit high? or can i add 2rd harddisk and move some data to there to reduce wa,but my load of the server is fine or any way to reduce wa?
View 1 Replies View RelatedI am running a Fedora box with cPanel...
The hard drive has a capacity of 36 gigs and there's currently 18 GIGs of data on it.
When I do "df -h", it indicates that / has 85% of it's capacity in use. When I run "df -hi" it shows that / has 58% of it's inodes in use.
Is there anything I can do to increase /'s capacity? Can I free up some inodes? All that / contains are folders.
I just received:
[cPanel smartcheck] Possible Hard Drive Failure Soon
ATA Error Count: 1512 (device log contains only the most recent five errors)
Error 1512 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1511 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1510 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1509 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1508 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
----END /dev/sda--
What do you advice me to do? ask the DC to change the Hard Drive or wait till damaged?
I already have a weekly external Backup.
Hard drive arrangement
I have a terminal server with a bunch of applications on it, among which is a database driven app. There have been complaints that access to the db is sluggish. right now the server is on just one 7.2k drive.
I am guessing its a hard drive bottleneck because memory and cpu usage seems okay. I have a few ideas. Please tell me which of these you would recommend.
1. Upgrade entire server to raid 10 system.
2. Upgrade the entire server to a 5-disk RAID 5 system.
3. Create two raid 1 setups. One for the OS and regular apps, the second one to host the DB.
4. Create a raid 1 setup for the OS and regular apps, and a RAID 5 setup for the DB.
Ideally I would like to see improved read/write speeds on both regular files/apps and on the database. The RAID 10 system was what I was leaning towards at first because the stripping increases throughput, but then I realized I may see better performance by keeping the regular files and the DB on independent setups so that OS and file read/writes won't affect the DB read/writes.
I have never had a hard drive fail on me, i dont think the I/O on my servers would ever warrant it but im looking to ask people that have had a hard drive die one them the following:
1. Were you ever cautious before your hard drive failure or did you lose data and if you did lose data, did it make you buck up your ideas (i.e do you now have a solid backup plan or do you still play maverick)
2. If you have had a hard drive failure, has it made you, do you think, overly-cautious?
3. Has a hard-drive failure ever swayed you towards the more expensive raptor drives? and if so, why?
No data at the 2nd hard drive.
I can only see the drive letter [E:].
When double click the drive, it says do you want to format.
how do i back up a hard drive on a windows server 2003...
and is there a way i can make one hard drive back up to another one every somewhat minutes or whatever?
I just purchased a 500GB ATA hard drive (meant to get SATA but must have misordered, but I don't think it makes that much difference) to replace a 80GB SATA hard drive on a Windows Server 2003 server. There are two partitions on the 80GB drive, and rather than add the new HD as a third partition, I would like to clone the data on the 80GB drive to the 500GB drive, then increase the partition sizes and remove the 80GB completely. Is there a specific method or software I can use to accomplish this?
View 4 Replies View Relatedthe max HDD allowed iin servers is 8 HDDs only ( depend the type of proceesor ) and it be impossible to make each user in a seperated HDD
but i have a good idea :
mounting a virtual HDDs or something like NAS / SAN / eVault / iSCSI ... etc on the home dir of user ( example : /home/user )
on my dedi i have currently 160 gb HD.. i was thinking of adding another 80gb on it..
the support says they will attach the HD and nothing else..
So can anyone tell me how to make that HD usable along with my cuurent one so that i can save data on that HD too along with the current one
I am getting this error on my mail from cpanel
S.M.A.R.T Errors on /dev/sda
From Command: /usr/sbin/smartctl -q errorsonly -H -l selftest -l error /dev/sda
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Unknown_Attribute 0x0022 050 039 045 Old_age Always In_the_past 890961970
----END /dev/sda--
Is it a big issue.. whats the solution for it?
I am going to mount my new hard drive to /home/user/public_html but I have a question before I do so. If I upload stuff to /home/user/public_html will it go to my new hard drive that I just mounted there or will it still go in the old hard drive?
The reason why I want to mount it there is because my other hard drive ran out of space, and I would like to continue this user account's space without having to move this user.
to clone a scsi 73 GB into a 126 GB scsi hard drive do you know a software that can doit at OS level (windows 2003)
View 3 Replies View RelatedFrom your experiences, which manufacturer has been the most reliable for you? What kind of life expectancy can I expect from a new hard drive in a server environment? Also, what kind of quality/life can I expect from refurbished drives?
Thanks in advance.
By the way, I'm specifically looking at 10,000RPM SCSI drives. Both U-160 and U-320.
I'm currently hosted on a VPS server with Galaxy Solutions, but just last night I was informed of a hard drive failure.
This morning they said the DC couldn't recover the data, and now they are trying to recover the data themselves. Right now I'm assuming that if the DC can't recover it, then there isn't much of a chance of it being recovered at all.
I've put in countless hours and dedicated so much of my time to my sites, something which certainly cannot be compensated for. I would like to exhaust any possible way to recover the data.
Can anyone recommend what I should do in a situation like this? Would it be advisable to consult a data recovery specialist? It would be great if you could also recommend one.
The cost doesn't matter. I'm extremely frustrated, annoyed, and confused because of all this. Just like that, all my work is gone.
I did have backups, but they were on the same server.
what others are using in their servers when it comes to hard drive preferred manufacturer.
We use to only use Seagate but in some recent servers switched to Western Digital Caviar Black Drives (1TB) and experienced 1 failure after 30 days. Not that this makes us think that these are bad drives as we have also had failures with Seagate as well but would really like to know if there any difference in the reliability between manufactures?
if typically you were to add an additional (third) hard drive (SATA) to a server, would it add any additional string on the CPU?
Assume that there is no extra disk usage - meaning that static image and html files off disk two are simply moved to disk 3.
I have my backup disks here because my server got hacked and we didn't like how liquidweb made the things. So we ask them to ship us the disk. They ran photorec and they got lots of .gz files from it. All accounts I would say. But 50% of them the .tar.gz files came corrupt. And is lefting all the big accounts and until now I haven't seen any corrupted file that came with MySQL. And I think MySQL is most important to all clients.
View 5 Replies View RelatedI would really like to know which hard drive brand you have had the best success with in regards to server hard drive reliability. Is it Seagate or Western Digital? Or is it one of the other brands? Please vote. This poll is specifically regarding SATA2 hard drive experiences in servers. Please do not factor in SCSI hard drives.
View 14 Replies View RelatedThis week I reached the pinnacle of all time greatest screw ups I've ever done with a web server in five years. During a routine upgrade, my server crashed and basically burned to the point that the technicians at Burst/Nocster felt it would be in my best interest to clear the server out and do a fresh restore.
Fortunately, I had the majorty of files and designs I've done on a safe backup. Unfortunately, the mysql database I had was not so fresh and recent. In there lies my big problem on an issue I really have not seen much information about.
We all know of the mysqldump command that can be used to backup databases and save a .sql file on the server. Its quick, easy, and relatively painless. The problem I have run into is
mysqldump --opt -u nqforum_braduser -p nqforum_nodqdb > /home/nqcom/backup.sql
This would be the command I'd use on my normal mysql dump. However, all of my files and past server information has been installed as a slave hard drive temporarily until I can gather everything I need. Therefore, the command above won't work because it is looking for this mysql database & user that does not exist on the new server. I currently have the slave hard drive path stored at
/mnt/olddrive/
So for example, to get to the website that would have that particular database
/mnt/olddrive/home/nqforum/
So my question for those who know anything about slave hard drives and mysql, how can I get a simple current backup of this database saved to a location, then of course once it is saved as a .sql file somewhere, I can simply run a mysql restore command in SSH to bring it back.