Plesk 8.1 - No Stats Archives With AwStats And Weablizer
Mar 11, 2007
I do have a managed VPS at SolarVPS, it's set up with CentOS 4.2 p6, Plesk 8.1 and AwStats 6.6 and Webalizer.
Webalizer and AwStats are working, but there's a problem with accessing the monthly archives. When looking at AwStats or Webalizer I can only access the current month, NO previous months, NO archives, which makes statistics pretty useless.
I've already asked support at SolarVPS, but they said it's 3rd party software and they don't support it
I guess I'm not the only one having problems to access the web stats. Does anybody know how to fix this problem?
View 2 Replies
ADVERTISEMENT
May 23, 2008
I look after a number of sites and monitor their stats. We use both webalizer and AWSTATS so we can have a comparison. Up until recently the stats for both of them where relatively the same, webalizer usually showing higher numbers as it doesn't filter bots but the progression of increase and decrease in stats was proportional. However, over the last few months a curious trend is appearing, the stats in AWSTATS are decreasing every month whereas the stats in Webalizer are increasing, the gap between them now is huge.
View 0 Replies
View Related
Mar 21, 2007
I don't like having to come here for help, but I'm stumped on this one and my server tech isn't really helping - perhaps I'm overlooking the obvious. I have an addon domain on which stats are not updating. As of the 11th of this month, the site had over 1.2k uniques and right around that time we did a server move (on the 10th so it may have started then).
It is only for this one addon domain that things aren't working. It registers 0 new anything since then with the exception of yesterday when my tech says he repeatedly refreshed the page and it registered a grand total of 2 uniques. Back to 0 again so far today. I know the site is getting traffic.
Secondly, Webalizer shows very minor traffic in its categories with numbers that remain in the low single digits.
View 2 Replies
View Related
Nov 6, 2009
I'm running Plesk 9.2.2 & using the supplied AWStats install. Where will I find the configuration that dictates when AWStats will be updated? It's currently updating at 3.36am daily, & I'd like to set it to hourly. Can't find anything in the root or psaadm crontabs & not sure where else to look.
View 5 Replies
View Related
Mar 26, 2014
how to enable AWStats for the domains on my server. In our old Panel (v9.5), I could go Domains > DOMAIN.TLD > Web Hosting Settings, and on that page there was an option to choose between Webalizer/AWStats/None. In version 11.5, I don't see that option.
When I look on the actual Windows server, I do see an AWStats directory along with a Webalizer directory in "C:Program Files (x86)ParallelsPleskAdditional", so I think it's installed...? AWStats comes along as part of the Plesk Panel license, right?
I can see the Webalizer stats when I browse to [URL] ...., but I'd much rather see AWStats.
View 2 Replies
View Related
Oct 8, 2014
Using Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:
/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.
View 2 Replies
View Related
Jan 6, 2015
I accidently added a new domain to another domains webspace instead of a separate one. I removed the domain and readded it correctly.Ever since then the nightly web_statistics_executor.exe gives me the error
The system cannot find the path specified. (Error code 3) at Open file 'D:Inetpubvhostsdomain.co.uk. pleskstatisticsdomain2.co. ukwebstatCopy AWStats.lock'....
View 1 Replies
View Related
Nov 5, 2014
I have an issue with Plesk and Awstats not building the html pages for website statistics. Problem is server-wide i.e. it effects all domains.
I've tried to manually run the /usr/local/psa/admin/sbin/statistics with every possible options but all that happens is that awstats calculates new stats to the vhosts /var/www/vhosts/system/domain.tld/statistics/webstat/awstatsMMYYYY.domain.tld-http.txt file.
Nothing is put into the /var/www/vhosts/system/domain.tld/statistics/webstat/YYYY-MM folder which should contain the static html pages.
Example listings:
Code:
# ll /var/www/vhosts/system/<domain.tld>/statistics/webstat
total 80
drwxr-xr-x 4 root root 4096 Nov 5 10:58 ./
dr-xr-x--- 6 root psaserv 4096 Oct 23 12:36 ../
drwxr-xr-x 2 root root 4096 Oct 23 13:12 2014-10/
[Code] ....
I was able to create the static pages by running Awstats directly:
Code:
# /usr/share/awstats/tools/awstats_buildstaticpages.pl -awstatsprog=/usr/lib/cgi-bin/awstats.pl -configdir=/usr/local/psa/etc/awstats -config=<domain.tld>-http -dir=/var/www/vhosts/system/<domain.tld>/statistics/webstat/current
So things I have already checked:
- Awstat paths in /etc/psa/psa.conf are correct
- Domain configs are ok as awstat can create the stats data and awstats_buildstaticpages.pl can can create the pages just fine
- File permissions are ok
I just cannot figure what the problem is. /usr/local/psa/admin/sbin/statistics doesn't give any errors but on the other hand it doesn't have a debug option either which might be useful.
OS: Ubuntu 14.04.1 LTS
Plesk version: 12.0.18 Update #22
View 4 Replies
View Related
Nov 13, 2014
I followed the following KB to allow country to be identified via GeoIP in AWStats: [URL] .... It works well on one of my domain, but I had to disable first the stats through PLESK Admin, then to reactivate it, so it would regenerate the conf file in /usr/local/psa/etc/awstats/* for a particulair domain. I then followed this KB to re-calculate all stats with country identification: [URL] .... It works as well.
But now: How can I regenerate all the conf file in /usr/local/psa/etc/awstats/* ? Is there any magic command?
View 1 Replies
View Related
Dec 18, 2014
Currently i am using webalizer... How can i switch to aw stats by importing the current data...
View 1 Replies
View Related
May 4, 2015
I have installed an SSL certificate on my website since last saturday the 1st of May, and forced redirection to https URLs via .htaccess.
Since then, I cannot see any statistics in AWStats. All values stops after the implementation of the certificate. How can I continue to have statistics for my secured web site ?
View 3 Replies
View Related
May 16, 2013
I have noticed that resellers traffic stats (looks like email) are not being updated and just show 0.
On the server that is for resellers I see there is a file in /usr/local/psa/var/log containing a file mail_traffic_pendings.dat with sender and recipient domain traffic. I presume this has to be processed to go into the database, but obviously it is not. How to debug this issue so that email stats get updated for clients.
View 2 Replies
View Related
Aug 19, 2014
When i try to check my stats, i got this error : Not Found
The requested document was not found on this server.
URL : domaine.nld/plesk-stat/webstat/
I tried a lot of commands, to repair too..
# /usr/local/psa/admin/sbin/statistics --calculate-all
WARNING during statistics_collector execution: : Executing logs preparation...
But nothing... Always the same error.
View 1 Replies
View Related
Mar 14, 2014
I had an hosting account with a copany, recently I migrated to VPS managed by plesk 11.5..I was able to get the awstats database file from the old host, and i have copied them in the /var/www/vhosts/mydomain.com/statistics/webstats/ folder, together with the other database files genereted by the new VPS hosting
Only problem is that plesk only rebuilds everyday the static page for the current month, and I see no way to ask him to build the pages for this past months. Also would be good if he would rebuild the header to have updated the dropdown menu from which to choose the month to dispay..Is it possible to rebuild manually these static pages?
View 5 Replies
View Related
May 16, 2007
Code:
root@srv01 [~]# free -m
total used free shared buffers cached
Mem: 10134 9598 535 0 249 7238
-/+ buffers/cache: 2109 8024
Swap: 4094 1 4093
root@srv01 [~]# Free
-bash: Free: command not found
root@srv01 [~]# free
total used free shared buffers cached
Mem: 10377476 9823916 553560 0 255984 7412716
-/+ buffers/cache: 2155216 8222260
Swap: 4192956 1032 4191924
View 5 Replies
View Related
Feb 17, 2007
Below are some results from various stats programs from one day's activity on our site. webaliser and awstats give sort of similar results (although still 6400 pageloads difference), but these results differ so much from what google (analytics) says.
can anyone think of an explanation for this? does google have a different definition of a visit compared to webaliser and awstats? for these latter two is visits = hits?
Webaliser 4000 visits, 17600 page views. Aw stats says 3800 visits, 24000 page views. google says 637, 1500 page views. adsense says 3,600 page views.
View 0 Replies
View Related
May 5, 2009
which kind of operation have performed by this COMMAND
because its always there on my server when i am monitoring server through top command .Is it generating logs? if yes then which kind of logs?
View 4 Replies
View Related
Jan 21, 2007
how to install awstats on my server so that it is viewable in web/ftp stats in cpanel by all account on my server. Its been a while since installing it on a server so ive forgot the commands.
View 10 Replies
View Related
Mar 27, 2007
does anyone have a tutorial how to setup awstats on a windows webserver?
View 1 Replies
View Related
Feb 6, 2007
ive just setup and installed Awstats on my server, its working great but i have one question id like to find a solution to.
i run a 'mobile' community site thats accessible on mobile phones, but for some reason awstats seems to think the browser called UP.browser (which alot of phones use) is a bot and therefore is not displaying it in the main results. does anyone know how to change this.
View 3 Replies
View Related
Apr 4, 2006
does anybody know if there is a possibility to circumvent godaddy´s pathetic stats they offer on shared accounts?
-I am not quite sure what tells you the unique visitors (always a good one to know )
-It doesn´t tell you what robots crawl your site. It just says: robots 28 (great!)
-The graphs are all reversed. Meaning that the now date is always on the very left hand corner of the x-axis towards the 0 intersection. This is pretty pathetic as it goes against anything human brains are accustomed to.
I´ve got to stop venting now. I would appreciate if somebody knows where I can find the unique visitors (hosts served maybe?) and how I can install a better stats program on Linux shared hosting at go daddy.
View 3 Replies
View Related
May 28, 2008
I have a hosting pack with them, its not bad, didnt had any downtime yet, but...
Disk Space1.30 TB
In Use849.04 GB(63.56 %)
Free Space 486.75 GB
CPU Load: 38%
Memory Used: 3.78 Gb of 3.96 Gb
View 14 Replies
View Related
Jan 2, 2008
When I go through my AWStats under "Links from an external page (other web sites except search engines)" I see several domains that have linked to me. When I visit these sites they are generally porn and drug sites that do not contain a link. Some of the sites redirect you to other sites. When you look up these domain names they are all from Russia.
These sites account for mulitple hits as high as +14.5%. These sites do not represent the content on my sites.
My questions are.
How do I stop this? I have found banning IP addresses does nothing.
How are they doing this?
Can this lead to your site being blacklisted?
View 11 Replies
View Related
Jun 18, 2007
Anything good out there that you recommend that does not need a lot of set up?
View 7 Replies
View Related
Mar 31, 2007
I'm aware of AwStats for Win and SmarterStats, but I'd like to know of any other, if available?
View 11 Replies
View Related
Jul 11, 2007
root@server [/scripts]# ./runweblogs username
Log checker loaded ok..
==> WARNING: The configured processor count does not match the
==> actual processor count (4)! Running log analysis programs
==> on this system may cause excessive load! You should set "extracpus"
==> to "0" in /var/cpanel/cpanel.config if this is not ok.
==> cPanel Log Daemon version 22.2
==> Shared RRDTOOL support enabled
==> Starting cpbandwd (bandwidth monitoring for IMAP/POP)
cpbandwd is already running.
Processing eldred...
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
Stats are not updating for this account. I ran this twice, keeps getting stuck at this line forever..
Run Logs domain: domain.com BW Limit: 262144000000 Domains: [save.domain.com save.info store.domain.com]
View 11 Replies
View Related
May 12, 2009
I've always used Awstats on my LAMP servers, because it's server side and gives easy to read and powerful web statistics.
I wonder is there any similar easy to install and powerful server side web statistics software for IIS 7?
View 3 Replies
View Related
Jun 4, 2009
I have tried to manually setup awstats on a website in Windows 2008 with IIS 7. The problem here is that I have to create two conf files for each website, one named awstats.sitename.conf and the other awstats.www.sitename.conf. If I don't do so, then awstats does not work on either www.sitename.com or sitename.com. I cannot update the stats or view it from the browser. I have a few Hosting controller servers in which awstats is used and I compared the conf file with them and there is no difference. I wonder what could be the issue.
View 1 Replies
View Related
May 2, 2008
I have been more than 1 year with DownTownHost, and although overall they are quite OK, yet I need to point out some serious flaws which no one ever mentions. This is just an honest complaint.
Namely - downtime.
There is downtime on DownTownHost which in my case lasts a few days each month. I have not been analyzing my stats closely, but when I do, I notice there is a monthly downtime...
The reason - I don't know.
The last time, I can see from AW stats that for about 48 hours there was downtime resulting in site became inaccessible, and there were ZERO visitors for 24 hours at least.
It seems towards the end of the month, there will be downtime...of some kind. Around 27/28/29 of the month. Visitor levels will show a drop for a few days during this period.
Or if not the end of the month, then in the middle of the month....
But last month was bad....1 whole day my blog was not available. Zero visitors recorded.
I just want to know if anyone experienced this also or not.
My server is server 20.
DTH is OK in most things....but downtime is something I really don't tolerate....
Maybe there is an explanation for this, but if these continue, I will look for another host.
View 14 Replies
View Related
