Plesk 12.x / Linux :: Replacing Default Certificate
Feb 24, 2015
I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.
I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?
I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?
View 3 Replies
ADVERTISEMENT
Sep 30, 2014
My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail
What I want:
I have an old sha1 certificate and I would change this for the whole server.
What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).
Then I set the new certificate as standard certificate and pressed the "secure pannel" button.
After that the panel uses the new certificate.
Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.
Reboot
But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.
View 2 Replies
View Related
Nov 20, 2014
My default certificate expired recently. I created a new certificate "default certificate 2".
I used this certificate for "Secure the Panel"
I went to "Tools and Settings" -> "IP addresses" and made this certificate the default for all the IPs. On the page "Tools and Settings" -> "SSL certificates", it says Used: 0 next to "default certificate".
But when I try to delete it, it tells me: "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
Is there anywhere I can check where this certificate is still used?
View 3 Replies
View Related
Jan 28, 2014
How to install a certificate for a brand ?
Let's say I have a brand B associate to a reseller R and a domain name domain.com.
When B sell a new subscription (with the associated webspace) it is available under sub.domain.com.
I would like to have a specific SSL certificate installed by default for every newly created webspaces by B under xxx.domain.co
View 7 Replies
View Related
Oct 11, 2014
I've have a problem with a server : we have create as usual certificate with Tools > SSL certificates.
When we want to put certificate with the domain, we don"t have the "Secure your sites" menu in the "websites and domains" sub category.
Why ? How can i activate the certificate with the domain ?
View 5 Replies
View Related
Oct 15, 2014
I have issue with qmail server. I want to update ssl certificate and for this i have replaced older servercert.pem with new servercert.pem file in /var / qmail/ control/. and restart service of qmail using qmailctl restart.But after updating this certificate my web browser still showing older certificate details.
View 1 Replies
View Related
Sep 26, 2014
I installed a new ssl certificate, changed it to be default and secure Plesk, switched the IP to use it. Now I wanted to remove the old one but it shows me that there is still one usage of this cert and I can't remove it. But how can I find what is using it?
View 5 Replies
View Related
Nov 3, 2014
I tried to remove the ssl certificate but although I have removed it from the IP I'm getting an error that it is still assigned to it. The solution in [URL] .... didn't work cause the Certificate field is grey out in my case.
View 1 Replies
View Related
Jul 25, 2015
I want to embed a SSL certificate for mailman permanently in the server.conf file.
For Roundcube I've found a manual: [URL] .... (in German), but not for Mailman.
View 5 Replies
View Related
Oct 27, 2014
I’ve read the documentations of (PBAS, Plesk, and Securing Websites).how to add SSL Certificate to our Webmail? In addition, I need to know, how to request CSR key and install SSL for our mail server in order for us to protect our emails and to use the SSL Protocol in mail softwares such as Outlook? I will explain the scenario in details:
1- We have (www.example.com) which is our "Plesk Server hostname" and a subscription in our "Plesk Server".
2- We have (pbas.example.com) which is our "PBAS Server hostname" and it's not a subscription in our "Plesk Server".
3- We have (account.example.com) which is a "Subscription" in our "Plesk Server".
Here are the DNS records of our domain and subdomains:
Host-Type-Data
-A-192.168.1.30
www-A-192.168.1.30
mail-A-192.168.1.30
pbas-A-192.168.1.31
account-A-192.168.1.32
-MX-example.com.
how to generate CSR key for each domain/subdomain and how to install the SSL for it? Our "Plesk" is 11.5 and installed on CentOS 6.4.
View 8 Replies
View Related
May 27, 2015
When using `plesk bin --update domain.example.com -certificate-name 'certificate'`, Plesk always returns `Unable to find certificate`, I have verified the certificate exists using `plesk bin certificate -l -admin` and the spelling of the certificate name is correct. I can use the WebUI to associate the certificate to the site and have verified it works, however I need to automate this task.
Also, the online documentation for the `plesk bin site` command does not mention the `-certificate-name` option, however it is listed when running `plesk bin site -h`.
The documentation missing the information is found here: [URL] ....
View 2 Replies
View Related
Jan 20, 2015
I'm running Parallels Plesk 12 on Debian GNU/Linux 7.6...I have a valid certificate for my mail server : mail.mydomain.tld but I don't find the place in Plesk 12 to put it.
View 2 Replies
View Related
Feb 13, 2015
I installed a new certificate, made it default, assigned it to the shared ip address and made the plesk panel use it.
The problem is we have 200 virtual hosts using the old certificate. Is there a way to reconfigure all those domains easily.
View 13 Replies
View Related
Mar 4, 2015
I've got an issue with the intermediate certificate, I need to provide additional to my certificate. As usual, I created a cert bundle with certs in following order:
- key data (BEGIN RSA PRIVATE KEY)
- crt data (BEGIN CERTIFICATE
- intermediate data (BEGIN CERTIFICATE)
And uploaded it successful to Plesk 12 certificate management. In Chrome, it's working. In Firefox not (as the intermediate cert is not provided by Plesk 12, and Firefox requires it).
How to inject the intermediate certificate for Plesk 12?
View 2 Replies
View Related
Nov 3, 2014
I am developing new module and installed SSL certificate using following API call.
Request call:
<packet>
<certificate>
<install>
[Code]....
But when i checked this domain by open in browser. the certificate is not installed. After lots of R&D i found that there are option of select SSL in hosting setting screen. The default selected SSL is "default certificate".
I have changed this option to "not selected".
After this changes i have installed certificate again and it is working fine. So is it bug in plesk or it is default behavior Plesk Panel?
View 4 Replies
View Related
Jul 23, 2013
I have a scheduled backup set on my panel, to backup all server configuration and content, and is set to run every week. I also set to keep only 1 backup on repository, but this config doesn't seem to work! My hard drive is getting full all the time, and when I check that its because theres a lot of old backups stored that are not getting removed!
My question is: the backup script removes the old files only at the end or it does it while backing up? If the action of removal happens only at the end of the script, i think it would explain why it isn't working: my hard drive gets full before, and the script drops an error, and never get to the end of it and it doesn't remove the old backups.
My Version: Parallels Plesk Panel v11.0.9_build20120609.17 os_Windows 2008
View 2 Replies
View Related
Jul 7, 2014
I created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.
But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com
How do I update to the new certificate for webmail?
EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.
View 1 Replies
View Related
May 30, 2014
I bought yesterday a SSL certificate from Comodo (PositiveSsl).
I have three files to install : the certificate itself, the Root certificate and the intermediate certificate.
Where can I add the intermediate certificate file ? Currently, a SSL report shows that the chains is broken (which is actually right).
View 1 Replies
View Related
Jul 3, 2014
Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?
Can I install on the plesk server a self-signed SSL cert and avoid the issues?
Can I buy & install a single certificate for that one domain and resolve the issue but not affect others.
Do I need to buy a SAN certificate for the whole server?
BTW I'm running CentOS 6.5 and Plesk 12.
View 3 Replies
View Related
Jan 21, 2014
My current configuration is: Ubtuntu Server 10.04, Plesk 11.5 and Roundcube 0.9.5 (installed via Plesk as the default webmail application) on Apache.
I played around with an SSL checker (https://www.ssllabs.com/ssltest/) to test my certificates and I found out that Roundcube delivered a broken certificate chain. It didn't deliver the intermediate certificate correctly. I searched through the configuration file of roundcube (/etc/apache2/plesk.conf.d/roundcube.conf) and discovered that there was only an entry for SSLCertificateFile.
To fix this I added the intermediate certificate via SSLCACertificateFile to the configuration file:
Code:
SSLCertificateFile "/opt/psa/var/certificates/cert-1sCtWB"
SSLCACertificateFile "/opt/psa/var/certificates/cert-FGLFqQ"
The only problem is that this configuration file is generated automatically:
Code:
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
View 13 Replies
View Related
Aug 26, 2014
Any domain using a SSL certificate is switched to the default certificate after each Plesk update?This is starting to get annoying and we are disabling automatic updates due to this error...
View 2 Replies
View Related
Sep 24, 2014
I just upgraded from Plesk 11.x to 12.0.18 and was eager to try the new sieve functions. I used the normal Plesk Updates/Upgrades tool to change the imap server from Courier to Dovecot. However, Dovecot will not start. It gives an error about /etc/dovecot/private/ssl-cert-and-key.pem missing.
View 2 Replies
View Related
Dec 16, 2014
I have a new Plesk 12 installation. I have configured a domain (example.com) with hosting that also requires wildcard subdomains.
To achieve this I had to create a vhost.conf file with...
ServerAlias *.example.com
This works and I can go to http://anything.example.com with no issue.
I purchased a wildcard SSL certificate for *.example.com and successfully installed it.
If I go to https://example.com it works perfectly and shows the correct certificate, however if I go to https://anything.example.com it tells me the connection is untrusted, when I view the certificate, it shows the Parallels Plesk self certified certificate and not my purchased certificate.
I created a vhost_ssl.conf with
ServerAlias *.example.com
ServerAlias *.example.com:443 #tried with and without this line
If I add an exception in the browser, then I am taken to the correct place, albeit with the incorrect certificate.
Of course I have executed httpdmng --reconfigure-domain example.com and also tried a full reboot.
In summary:
http://example.com - works
http://anything.example.com - works
https://example.com works with my certificate
https://anything.example.com has Parallels certificate but routes to correct page
View 5 Replies
View Related
May 15, 2014
After installing a RapidSSL certificate in a subdomain, https redirects automatically to http,
Plesk 11.5 with debian and last version openssl
Why https redirect to http when I setup the certificate?
View 1 Replies
View Related
Jul 9, 2014
I have little problem with Certificate SSL
Have Plesk 12 in Centos...all working fine...but I have assigned dedicated IP for one domain, have request certificate (as admin) for this domain, purchase certificate in Comodo and installed...this certificate working fine and SSL Checker is good...problem is in domain how have assigned this certificate in menu SSL not appear...
I have only Default Certificate (certificate Plesk self signed) and Not Selected...but name for real certificate CA not appear...in Admin IP Address have all ok...IP for this domain and certificate (name of certificate installed) and website.... With this problem is normal? How configure SSL for email?
View 19 Replies
View Related
Jan 12, 2015
Impossible to find a way to show, by default, all domains and websites...
When I log on the Plesk Admin, I come first on a list of websites and domains, but they are not «all» listed. I have to go to the full bottom of the page to click on «Show all».
I didn't find a preference or anything else to change that, and I don't understand why all domains are not listed.
View 3 Replies
View Related
Dec 5, 2014
I recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.
So it should be..
myserver.com (not SNI default for IP)
eas.myserver.com (SNI)
autodiscover.myserver.com (SNI)
But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.
I checked in
Plesk -> Tools & Settings -> IP Addresses
and that was set correctly, so I tried to change it and back again, then...
/opt/psa/admin/bin/httpdmng --reconfigure-all
Neither worked.
I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)
View 1 Replies
View Related
Jan 31, 2015
When typing my ip it used to go to Plesk landing page.
Then through the option: server > tools > IP Addresses, I changed the "Default site" to my main domain, however, it just points to the main page, and not changes the url to the domain (keeps the ip in title, and not show the domain url).
How to make it forwarded to the domain (show it in the address bar), and not just to the index page?
View 1 Replies
View Related
Sep 5, 2014
I think it is possible, but just to be sure...
Default document root is:
var/www/vhosts/www.mysite.com/httpdocs/
Can I change it to:
var/www/vhosts/www.mysite.com/web/
A simple "yes" or "no" will do...
View 3 Replies
View Related
Jul 13, 2015
Did 12.0.18 comes with default maria DB instead of mysql ??
View 2 Replies
View Related
May 23, 2015
When i add the private key and certificate via plesk panel, i get the following error:
ERR [panel] Unable to set the certificate: Unable to put certificate file: Unable to arrange cert file: file_put_contents failed:
View 1 Replies
View Related
