I think it is possible, but just to be sure...
Default document root is:
var/www/vhosts/www.mysite.com/httpdocs/
Can I change it to:
var/www/vhosts/www.mysite.com/web/
A simple "yes" or "no" will do...
Document root default in Plesk
I bought a new plesk and created new domains. For some odd reason, all the domains are looking at the default document root.
/var/www/vhosts/default/htdocs/
Rather than going to the domains document root
/var/www/vhosts/domain.com/conf
I checked the /var/www/vhosts/domain.com/conf/httpd.include, the document root and all are fine.
I also tried creating vhost.conf and assigning the document root there.
/usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=domain.com -v
It is also not working...
There is a bug in the current Plesk version 12, which was encountered on many of our Plesk 12 server until now. I do have Plesk 12.0.18 Update #23 with CentOS 6.
When a customer changes for example the document root of a domain nginx does not recognize it and the administrator of the server do have to restart nginx manually.
This issue is serious because CSS, JS and images are not working on such a page where a customer changed the document root. Nginx is throwing 404 error until nginx is restarted manually.
Other customers do have the same issue: [URL] .....
I need to place a file in the root of my server. How should I do?
I tried:
SSH connection
wget ......
but the file is not in the right place
Where should I place it?
i am relatively new to Plesk, i ordered a vserver with Plesk a couple of months ago and spend a lot of time setting everything up and developing several new websites. I am used to developping new websites on a hidden adress (sth like domain.com/dev/ instead of the top level) and then switch the document root to point to the hidden directory when all is done. This practice has served me and my clients well for the last 10 years.
Using the Plesk features like built-in applications seemed like a good idea at the time but wanting to switch the new websites live i have now found out that Plesk won't let me do this since..It is impossible to change document root because there are web applications installed on this website.
I had read somewhere on the interweb that the v12 would let me do this so i just spent the better part of today updating to v12 .. but alas no luck, the limitation is still there. Is there a way to remove this limitation ?
Basic question: does it matter where I set the document root for apache on a Linux system? I've googled this but haven't found a good answer.
This is for a VPS server running the Ubuntu (Debian) server os that I'm configuring. I'd prefer to simply create a new directory off the root and set that as the document root in the apache config file. Would this present any kind of security issue?
If that's no good, what's the best choice -- stick to the default?
to change the default document on my Web server from index to news.php, is there a simple process for this please?
My server is Linux based and my control panel is cPanelX. I've had a look around the control panel but couldn't find anything to help me.
I installed a centos4.7 with ISPCONFIG2 control panel, but any account I create it points to the documentroot of apache.
I am running my server behind a router.
On the /etc/httpd/conf/vhosts/Vhosts_ispconfig.conf the document roots are :
Document Root /var/www/web11/web for xxx1.com
Document Root /var/www/web10/web for xxx2.net
but when i type ant site, it goes to : Document Root /var/www/
I am running a LAMP server, working to get everything configured and as secure as I can make it. I have been trying to decide weather to change the document root to a different directory, or if it would be better/worse or more/less secure to chown and chmod the current directory.
Any input would be helpful, I just don't want to overlook some small detail as this is my first time handling a server on my own.
I just made a fresh install of the following :
Apache 2.4 (x64)
PHP 5.5.5 Thread Safe (x64)
OS: Windows 8.1 (x64)
And I think everything is working. When openingen 127.0.0.1 I see the apache message that the server is running and when executing phpinfo() it displays the PHP info.
My problem is that I'm trying to change the document root.
I have change the following in the httpd.conf:
DocumentRoot "C:/Apache24/htdocs"
<Directory "C:/Apache24/htdocs">
The lines abowe have been change to:
DocumentRoot "D:/www"
<Directory "D:/www">
After this I did a reboot of the apache server using the CMD httpd -k restart. I even tried restarting using the apachemonitor and rebooted the whole server. But apache still loads the files from c:/Apache24/htdocs
I can't find any more entries with htdocs to change. What am I missing?
In httpd.conf I have
DocumentRoot "C:/Programme/Apache_Group/Tomcat-8.0.5/webapps/ROOT/"
2.4.9 is complaining about this having to be a directory. It is definiteley. I can browse it with explorer.
When I change this to "C:/Program Files/..." it works.
Why is that? In the stock Win32 server I downloaded from the apache site I did not have to make this change.
I've done some manual change of document root in httpd.conf for a user. I know that now, I don't need to to manual change since user can set there own folder!
Now, If I rebuild Apache, he will re-do all the configuration to the original one. Where can I find the settings for domain document root so I can change it and EasyApache will rebuild the httpd.conf correctly?
I don't want to remove the domain since I'll lost all email account!
On my VPS I currently have:
/home/admin/public_html/ as my website root.
However, I plan on running multiple website (not linked whatsoever) on the server. I have LXAdmin and HyperVM. Is it possible to get additional files, such as:
/home/site2/public_html/
then etc..
/home/site3/public_html/
Is this possible? Because, would each need its own IP for the DNS?
When i try to check my stats, i got this error : Not Found
The requested document was not found on this server.
URL : domaine.nld/plesk-stat/webstat/
I tried a lot of commands, to repair too..
# /usr/local/psa/admin/sbin/statistics --calculate-all
WARNING during statistics_collector execution: : Executing logs preparation...
But nothing... Always the same error.
Impossible to find a way to show, by default, all domains and websites...
When I log on the Plesk Admin, I come first on a list of websites and domains, but they are not «all» listed. I have to go to the full bottom of the page to click on «Show all».
I didn't find a preference or anything else to change that, and I don't understand why all domains are not listed.
I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.
I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?
I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?
I recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.
So it should be..
myserver.com (not SNI default for IP)
eas.myserver.com (SNI)
autodiscover.myserver.com (SNI)
But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.
I checked in
Plesk -> Tools & Settings -> IP Addresses
and that was set correctly, so I tried to change it and back again, then...
/opt/psa/admin/bin/httpdmng --reconfigure-all
Neither worked.
I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)
When typing my ip it used to go to Plesk landing page.
Then through the option: server > tools > IP Addresses, I changed the "Default site" to my main domain, however, it just points to the main page, and not changes the url to the domain (keeps the ip in title, and not show the domain url).
How to make it forwarded to the domain (show it in the address bar), and not just to the index page?
My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail
What I want:
I have an old sha1 certificate and I would change this for the whole server.
What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).
Then I set the new certificate as standard certificate and pressed the "secure pannel" button.
After that the panel uses the new certificate.
Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.
Reboot
But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.
Did 12.0.18 comes with default maria DB instead of mysql ??
View 2 Replies View RelatedAre some days that in the root of my server there is a folder without a name. I think it is fail2ban to create this folder? Only I have access to the server.
View 11 Replies View RelatedWhen a customer use the wordpress auto installation tool, all work ok.
But, when the customer try to install wordpress manually (Uploading by FTP), it returns different permissions errors.
Example: "wp-config.php" cant write .
I compared the permissions of both vhosts (WP-Auto-install and WP-Manually-Install), and have totally different permissions.
WP-Auto-installed : /httpdocs = 770
WP-Manually : /httpdocs = 750
How I can set permissions to 770 by default when create a vhost? to avoid the customer having to do it manually.
I have suddenly lost all of the websites on the plesk panel server 12.0.18. One of the domains was being used to spam and so I started blocking stuff and removing some of the offending files and folders and the spamming stopped.
However it got to a point where I needed to restart the server and although it was working before the restart, once I did restart it it stopped working. All domains are loading nothing and the access_log looks like nginx or FastCGI is trying to redirect the page somewhere. The bootstrapper repair log file states:
"Details: PHP Warning: include_once(Template/Writer/Webserver/Apache.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/Loader.php, Line: 97"
I have found through the KB the way to do it server wide but I was wondering if there was still a way to reset default domain permissions per domain.
/usr/local/psa/bin/repair --restore-vhosts-permissions - to restore all domain permissions.
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
Is it possible to know how can I setup the DKIM default for each domains without manually activate it each time?
View 6 Replies View Relatedi'm running 12.0.18#34 on PCS dedicated server. i recently discovered that some of the default jails on fail2ban that is shipped with Plesk 12 were not working correctly. Let me explain what i mean. For instance, the plesk-panel jail. The logs were parsed correctly, the command was successfully appended in iptables list, the fail2ban log was updated. Still, the intruder was not blocked. I kept reading "already banned" on the fail2ban.log but actually there was no blocking.
After some checks, i found out that fail2ban default configuration states SSH as default blocking port.
that means, the block was working but only for ssh hits. thus the plesk-panel admin page hits were passing through.
since i added port=http,https on jail.local > plesk-panel and did it a restart on fail2ban service, only then did it start to actually block incoming hits.
I think this should be verified by programmers group and maybe include a fix in some future minor update.
My server currently installed plesk 12 , I need to change wordpress default language ( default English )
Which aps table to edit language.
My default certificate expired recently. I created a new certificate "default certificate 2".
I used this certificate for "Secure the Panel"
I went to "Tools and Settings" -> "IP addresses" and made this certificate the default for all the IPs. On the page "Tools and Settings" -> "SSL certificates", it says Used: 0 next to "default certificate".
But when I try to delete it, it tells me: "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
Is there anywhere I can check where this certificate is still used?