When I am trying to configure my e-mail in outlook 2010 / Thunderbird, the incoming Server don't respond (IMAP/POP3) but for the outgoing, it works perfectly. Webmail is full functional.
I have this on Outlook : [URL] ....
How can I do to send email without the security warning?
I want the clients sending mails no longer have a security warning.
I tried with SSL port 465
I tried with port 587 TLS> Mail settings for the entire server> Enable Send Message
I am running CentOS Linux 7.0.1406 (Core) with Plesk Version 12.0.18 Update #19.
Customers who use Outlook or Mozilla Thunderbird cannot send Emails through IMAP (Courier) because their mailclients say "Cannot write to sent Folder" even when there is a "Sent" Folder in the IMAP Structure existing. It is also subscribed by the Client.
Outlook Users have to go to: file - account settings > account settungs > Change > more Settings > advanced > root Folder path and enter the word inbox
Mozilla Users have to enter "INBOX." under advanced IMAP Settings in Thunderbird.
So my question is: Why is that ? And cant i Change something as admin on the Server side so all customers dont have to Panic and set an inbox Folder path in their mailclients ?
For customers it has to work without Client-side configuration...
Incoming mail on several devices with various operating systems gives me no trouble at all. However I can not find the right settings for outgoing mail for Thunderbird 24.0.
For incoming mail I noticed I had to submit mail.<name>.be and port 143, no authentication and non-encrypted password. And it works.
For outgoing mail server I've tried a lot of options:
mail.<name>.be, all ports tested, all authentication options, and with both encrypted or non-encrypted passwords, in every combination of these settings.
smtp.<name>.be , all ports tested, all authentication options, and with both encrypted or non-encrypted passwords, in every combination of these settings.
<name>.be, all ports tested, all authentication options, and with both encrypted or non-encrypted passwords, in every combination of these settings.
Can anyone suggest a good PGP plugin for Outlook and for Thuderbird? So far I founf cgeep which is behaving properly so far.
View 0 Replies View RelatedI have a virtual dedicated server hosted with "Domains Priced Right" I have several domains hosted on the server with emails for each. I used to be able to view my emails in Outlook however recently I've been getting the error (0x80042108) 'Outlook cannot connect to incoming (POP3) email server'
I've switched to thunderbird and still have the same problem. "Could not connect to the server mail.blahblah.com; the connection was refused."
I have about 10 domains and I can't see the emails for any of them.
I know the emails are there I can see them when I use webmail. I know thunderbird works because it can get email from gmail and my ISP. It just won't connect to the server and download them.
Things worked in the past so I'm perplexed. I'm running Windows Vista and maybe a new update has caused a problem. It may be a firewall issue but I've had a look at that. Also I did do a clean up of some old drivers. I think it might be a dodgey email file.
I want to reinstall Windows Xp soon, as I got a virus and after cleaning the computer doesn't work as smooth as before. I gives some strange erros and sometimes it justs hangs up... I want to backup Outlook Express emails and settings before reinstall, and restore afterwards.
View 1 Replies View RelatedOn my plesk server, i have several emails account. These email addresses should receive only emails send by a specific server. But for now, they can receive any email, including spam.
So, i would like to block all emails that are not coming from the allowed server.
How can i do this in plesk ? As i am not a very good server admin, can you tell me exactly what i need to do in plesk?
Since the update I have a problem with my Firewall. I need to set "Allow all incoming connections" under "Server => Firewall" in order to connect over FTP with TLS (explicit). This was working before the update without allowing all incoming connections. How to fix this in the Plesk panel?
View 2 Replies View RelatedI have a client with a dedicated server running. Spec below.
The problem I am having is with incoming email. When I set up a new email account it can take about 10 attempts to log on to the incoming mail server. Once it has connected it will be ok for a short while then I will get a connection error and no emails will come through.
This is happening across all platforms, PC / MAC / iPhone and iPad.
I am a web designer with limited knowledge of the setting up of the server and was looking to set up email server within plesk.
General
CPUGenuineIntel, Intel(R)Core(TM) i5-2400 CPU @ 3.10GHz
VersionParallels Plesk Panel v11.0.9_build110120608.16 os_Ubuntu 12.04
OSUbuntu 12.04.4 LTS
Key numberPLSK.02873817.0002
System Uptime: 60 day(s) 10:03
Hostname
IP address
OSUbuntu 12.04.4 LTS
Panel version11.0.9 Update #62
Today I try to fit all FW rules to my need. After i blocked the traffic "allow other incoming traffic" in the Plesk FW i dont get folders listed via FTP. The FTP client connect to my server, but listing content times out. After allow other traffic the content get listed. The rule "Allow FTP connections" ist in all enabled all the time.
View 3 Replies View RelatedWe have many clients with same issue, when they try to connect into outlook they get a msg like this (print).
None of all them has the same issue, but a few of them.
When i restart all email services things works, but 30" later come back again...
We are using Plesk 11.5 servers with CentOS 6 and Courier-IMAP 4.12. Customers are experiencing several problems when using their IMAP mailbox in Outlook 2013:
Sending mail over SSL (port 465) will fail if SSL certificate does not match the mail.domain.tld setting. Resolution is provided by [URL] ....
IMAP folders (including INBOX) are not listed. Resolution is provided by [URL] ....
Sent items are not stored (nor online, nor offline). TechNet says that SENT and DELETED folders are no longer configurable by design. The only way to get sent items in a folder is by setting up a custom rule and using Visual Basic (!) to mark the messages as read.
I wonder if there is any chance to change the domain that is being shown as the incoming/outgoing mail server to users of the Plesk Panel, when clicking on the "Info"-Icon near an e-mail-account in the mail list (see screenshot).
We only have a SSL certificate for one domain and want our customers to use this domain in their mail client settings, so that the client trusts the domain.
When I deny all other traffic for the "System policy for incoming traffic" to secure the server by only allowing the explicit ports I've requested to open, my server stops operating correctly.
It appears when I set the "System policy for incoming traffic" to deny, it appears to be disrupting various functions such as web traffic over ports 80/443, FTP, SSH, they either work extremely slow or don't work at all.
I brought this up with my Plesk license provider and they stated that the Plesk firewall doesn't add any tracking for ephemeral ports, therefore if you set the policy to drop for incoming/outgoing, it's not going to allow proper TCP communication since the return socket can't be opened. Also that the firewall is an explicit deny system rather than explicit allow based system.
Am I doing something wrong? All I want to do is to block all ports other than the ones I've set to allow. Is this how it is supposed to work?
When i try to login from outllook pop3 is ok but smtp is error.
When i check mail log file:
Code:
Nov 4 16:28:07 server1 courier-pop3d: Connection, ip=[::ffff:176.43.150.48]
Nov 4 16:28:07 server1 courier-pop3d: LOGIN, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885]
Nov 4 16:28:07 server1 courier-pop3d: LOGOUT, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885], top=0, retr=0, rcvd=12, sent=39, time=0
[Code] ....
I try to past pci compliance,but now this is not importand. If there have some repair postfix command? Default configuration? Or how can i send emain from outlook.
I have just install on a new server plesk 12.0.18 Update #7 on centos 6.5 final.Added new hosting for the domain on a dedicated IP. All works fine (website, incoming mails etc) apart from outgoing mails.Both webmail (roundcube) and other mail software (outlook 2010, 2013 , android phone etc) outgoing mail i can't get to work.
I have attached screen from webmail with SMTP error (250) : Authentication failed..With Outlook it will allow me to set up account, test account setting... it say all all complete if i don't set secure connection (SSL)/requires authentication. But when you try sending mails you get the error: Your message did not reach some or all of the intended recipients.
Subject:test
Sent:16/07/2014 15:13
The following recipient(s) cannot be reached:
'x@xxx.com' on 16/07/2014 15:13
Server error: '554 5.7.1 <x@xxx.com>: Relay access denied'
When you set the outgoing requires authentication/ advance SSL you get:Send test e-mail message: None of the authentication methods supported by this client are supported by your server.I have tried changing to some outgoing ports to no avail.
situation:
- compiled and installed php 5.5 and 5.6
- both versions work fine and are registered in plesk
- base configuration for php is set for each version in a custom.ini
issue:
- plesk php-settings are not applied: not matter what I change in Plesk php-settings, the values from my custom.ini file are used
What did I do wrong? How do I re-enable plesk php-settings?
Addendum: The php-settings apply esspecially to post_max_size and execution_time
I am trying to change the default php settings under domain (upload_max_filesize & post_max_size) but nothing happens. I am running PHP 5.5 in FastCGI. I also changed it to Centos default PHP (5.4.16) but nothing happens again. It only works when PHP runs as Apache module. The problem is on FastCGI Application.
My server: Centos 7, Plesk 12 Check the screenshot for installed components.
so my website is working perfectly fine for a few months now, and im looking to use Roundcube instead of Google Apps.What are the DNS settings i need to change to for my domain registrar?Currently i have the following records, and it can only send email, and not receive.
A Records @ IP Address
A Records webmail IP Address
I cannot find the DNS Setting in Websites&Domain TheWebsite/Show More
I tried changing:
Tools&Settings
Plesk
Custom View setting (DNS template settings checked)
Also:
Tools&Settings
Plesk Appearance
Interface Management
-Power user View
(with & without) Use Custom View-Service Provider View
(with & without) Open hosting operations in Server Administration Panel
However when I go to
Websites&Domain TheWebsite/Show More, the DNS settings are still missing.
Is there any other setting I can try to show the dns settings?
Centos 6.6
Plesk 12.0.18 Update #30
Ubuntu 12.04
Upgraded Plesk from 11.5 to 12.0.18 from panel.
I have installed PHP 5.3.29 (make from sources)
All smooth, added handler:
Code:
/usr/local/psa/bin/php_handler --add -displayname 5.3.29 -path /usr/local/php5329/bin/php-cgi -phpini /usr/local/php5329/etc/php.ini -type fastcgi -id php5329
App work ok after change to new php with hosting settings(change php handler Fast Cgi)
But php info shows that: Loaded Configuration File is /etc/php5/cgi/php.ini
This is not good as I checked should be for certain vhost cutsom php ini which is generated by PHP settings.
For example I changed in Plesk memory_limit to 333MB applied changes panel show successully, but still there is 128MB default value in phpinfo().
Am I missing sth ? Is there additional task needed expect adding handler? Or is there a known bug?
ps. after change handler back to 5.3.10, (default installation) there also custom PHP settings file seems not to be processed.
I did not tested earlier maybe upgrade Plesk to v12 broked sth? What should I check?
I have tried to delete (and let psa recreate) php.ini from vhost/system/mydomain.com/ but also did not worked...
I want to know what settings to make in the Dns of my Server so always to show the www. in the browser, before the domain name.
For example, in the url to be www.mydomain.com and not mydomain.com
I manage 1 server with 5 domains. I use the panel as power user (unique user)
I want to assign a new IP to a domain. In the hosting setting there is no IP to choose and in the IP tab if I click on the IP there is no domains to choose becouse all the domains are assigned to the primary IP...
I'd like to set IP in the hosting setting of the domain...
I'm trying to view my sites using the "Quick Preview on a domain name in Plesk" setting. I notice that it modifies that domain's DNS records to include the IP with dashes, however when I attempt to preview any of the sites hosted, I get "server not found" from my browser. The URL is the correct syntax, but cannot seem to access the site.
I've tried turning DNS off and on for each hosted site, but this doesn't seem to make any difference.
where do I find the setting to change dns records in plesk 11.5 ver ? I do not see it, it is missing in settings of domain under tab: "Websites and Domain"
View 1 Replies View RelatedI want to change SOA Settings from defaults to these: When I press OK button shows that is saved but when I test with [URL] .... and [URL] .... shows that settings still is defaults.How to change these settings??
View 1 Replies View RelatedI recently reinstalled my Plesk Panel 12.0.18 after several failures, which I wasn't able to repair (not even bootstrapper.sh would work). All of my websites weren't accessible, the connection between websites and the Database server didn't work and the Plesk backend was unavailable, too. I used the autoinstaller via command line to make a new Plesk installation.
Now I have a clean panel, the websites are available again, the MySQL database works again, but I don't have all my settings and websites in the Plesk backend anymore.
My question is: How can I get the old settings/configurations, which are still on the server, back in to Plesk?
Some sites reach maximum children
so I need to change
pm.max_children = 5
for all new domains on a server
How can this be done?
I know i can change it manually on each new domain, is there some kind of template to modify?
I am having a problem setting mails on Thunderbird.i did exactly as you said in the documentation but still receive an error for sending an email (incoming email is good).i used full email address as username.domainname.tld as Incoming/Outgoing server address.
port 25 and 143 but still seem that i can't send emails.via web-mail i can , but via Thunderbird on my local PC i can't.I have a dedicated windows server with plesk 11.0.9