After the micro update, the database copy function started to hung even just for copying database with 4 tables with less than 10 rows of recrods. Although I followed the link below to remove the hung database copy and remove the unfinished database copied. URL....However, no successful database was copied at all even after the timeout was adjusted.
View 1 RepliesJust updated to V12 and noticed you can't copy a database from one domain to another as easy as before. So doing any testing is much harder. Is this correct or am I missing something...
View 5 Replies View RelatedIn previous thread we made few manual transfer of our domains.
We also made some automated migration of few domains/sites using Web Host Manager's Copy an account from another server feature.
All the files and other settings were properly transferred from old server to new server, but only the mysql database is not visible on new server. I am unsure if the same got copied to new server.
I have vps server with win server 2008 and Plesk 11.5.30. when i am trying to copy Mssql Database trough the panel i have an error: " Unable to copy database ". In the %plesk_dir%adminlogs under the php-error.log i have this error:
"[05-Feb-2014 13:31:43 Europe/Helsinki] ERR (3) [panel]: Database cloning failed.
[05-Feb-2014 13:31:43 Europe/Helsinki] ERR (3) [panel]: Task failed: id=163, pid=9700, type=db-clone, error=Unable to clone database."
Is it possible to update the MySQL version on the db nodes from 5.1 to 5.5 or is it supported?
View 3 Replies View RelatedI have installed a version of php (v5.4). My Web run correctly before and now not. My web is Joomla 2.5. I recived this error:Fatal error: Class 'JConfig' not found in /var/www/vhosts/*********/httpdocs/includes/framework.php on line 56.
View 1 Replies View RelatedAre that possible to have 2 version on my server?I upgrade from 5.3 to 5.4 yesterday but 2 site is down after upgrade of php.And i need 5.4 for 1 site and 5.3 for this other.
View 2 Replies View RelatedI've tried a few times to update php on my server from version 5.3 to the latest 5.5 however it keeps conflicting with apache2 that's installed and I ended up having to re-install everything as I accidentally deleted Plesk attempting to fix it.
Ideally I'd rather just run nginx with php-fpm without apache but it's not as straightforward anymore with plesk and how to go about updating PHP?
I've got a clean install of Parallels Plesk v12.0.18_build1200140606.15 running on Ubuntu 12.04.2 LTS.
When I update servers via CLI autoinstaller, I always (afair) get this mysqldump error message:
Code:
Stopping psa... * Stopping Plesk engine pool manager sw-engine-fpm
...done.
done
-- Warning: Skipping the data of table mysql.event. Specify the --events option explicitly.
mysqldump: Got error: 1049: Unknown database 'atmail' when selecting the database
===> Cumulative APS controller database (apsc) upgrade has been started.
===> Cumulative upgrade of APS controller database has been completed.
===> Cumulative Plesk database upgrade (revertable stage) has been started.
===> Preparing Plesk database upgrade (revertable stage).
===> Cumulative upgrade of Plesk database (revertable stage) has been completed.
Reading package lists...
There is no database "atmail" on any of our Plesk servers. Simple solution should be to first check if the DB exists before performing actions on it.As a bonus, perhaps it would be possible to suppress the warning about mysql.event.
I've got a problem to migrate A user from one server to another.
I tried to use the migration manager, but if I start the migration manager the migration will be started but after 2 seconds it has finished and no migration has be doen.
or should I moove the data manually?
Plesk 12.x
CentOS 6.5
Any method for copying the Firewall (extension) rules from one server to another.
I tryed install multiple-php version in my Plesk 12 on CentOS 6.5 using Plesk KB but it doesn't work very well so I installed php-panda and it works fine but I want uninstall the php 5.4.31 version that fail but leaving the no-atomic old version. How can I do that? I know that is installed in other directory.
View 1 Replies View Relatedhow can i show in putty during ssh session the version of wordpress used for a specific domain ?
View 4 Replies View RelatedI'm still using Plesk 11.5.30 and MySql 5.5.39. That was discribed here how to update. But i need to have a MySql 5.6.5 (minimum) for some software (This version is over 2 years old). I'm using CentOs 6.5. and PHP 5.4.33
how to do this, whitout breaking plesk 11.5.30??
I installed Nginx and PHP-FPM through the Plesk Autoinstaller.It works well with the default PHP version installed originally with the CentOS 6 system (5.3.3). I also installed manually following your KB [URL] .... additional versions of PHP. It works well, and I can use those additional versions through the Plesk UI.
Therefore, I was wondering how to use them with PHP-FPM? As when I activate a domain for Nginx with PHP process (PHP-FPM), it switches the PHP version to 5.3.3 and I can't change this parameter.
I have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....
When I click upgrade now at the plesk panel I get following error:
Parallels Panel pre-upgrade check... WARNING: The proftpd FTP service will fail to start in case the support for IPv6 is disabled on the server. Please check [URL] .... for details.
Is it safe to proceed? I guess it shall be automatically?
I'm new to Plesk - I've inherited a web site for a local social club so have just been handed login and password. I believe I have version 11.0.9 and as I can see mention of an Apache webserver I'm guessing its linux.
So - I want to redesign and use Joomla so I can share the content updating with others.
I can't install Joomla as I have PHP 5.1 and need 5.3. I have no 'server' or any sort of option I can find (and I've looked everywhere!) to find a command line or somewhere I can run things.
When I try to allow SSH access the option says Forbidden and there is no option to change it.
I am looking for a replacement to my existing ISPConfig 3.x installation and have heard a lot of good things about Plesk, so I decided to put up a test server with a trial version of Plesk 12.The server is running Centos 6.5 64-bit minimal install with all system updates applied before installing Plesk. After installing Plesk I used the commands from the attached text-file.After compiling PHP 5.5.20 with no errors displayed on screen I created a new subscription plan as a copy of the #default domain" plan and changed the name to "PHP 5.5 website" and in the Hosting Parameters I changed PHP to run still run as a FastCGI application but use my compiled PHP 5.5.20 instead of the OS vendors PHP 5.3.3.The configure options used are the same as I did use for my ISPConfig 3.x servers.I also tried the configure options shown here: [URL]... But the command ends with a "configure: WARNING: unrecopgnized options: --enable-fastcgi"
If I compile with the attached script I get a HTTP 500 error when visiting the selected website (which is a clean installation of Drupal 7.34) and in the error_log for my test site I get this:
"
[Sun Dec 28 18:51:48 2014] [warn] [client x.x.x.x] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sun Dec 28 18:51:48 2014] [error] [client x.x.x.x] Premature end of script headers: index.php
"
x.x.x.x is the internal IP of my router/firewall.I have also looked in the Plesk Administrator GuideIs there a known issue with Plesk 12 and CentOS 6.5 64-bit when wanting to use multiple versions of PHP, since both the version compiled using the KB article above and my own attached script worked fine on my ISPConfig 3.x servers.
Using Plesk 12.0.18 and CentOS 6.6, I installed PHP 5.6 through the Plesk Updates menu. After that, the new version was not automatically selectable inside Plesk Panel. I added it using php_handler.However, when selecting PHP 5.6 for a website, I only get a 500 server error.
Trying to troubleshoot, I ran "/opt/plesk/php/5.6/bin/php-cgi -v", which also resulted in an error:Fatal Error Unable to allocate shared memory segment of 67108864 bytes: mmap: Cannot allocate memory (12)The same kind of error is logged in the error_log for the website I switched to 5.6.
The error also occurs when calling "php-cgi -v" directly in the command line.The same error occured when I tried the same thing with PHP 5.5.
i notice in the release notes for 11.0.9 update #63 that the 'internal php version is updated to 5.3.29'.i have been using php 5.4 for some time now (installed outside of plesk since php 5.4 it's over 3 yrs old now and php current versions are 5.7 now...).
IF i would install this update #63, is it going to DOWNgrade my php in use on the server for all of my sites? then i'll have to re-upgrade after installing #63. and if yes, when i install #64, #65, etc... do i have to do that from now on? how this automated update works under the covers so i can get the security updates without downgrading my php version in the future unintentionally.
I have received notices from several customers with this error and I checked myself. When trying to connect to a ftp hosted on my server with Plesk gives an error expired certificate, a certificate of Parallels. The solution I've found is to configure access without TLS but says it is unsafe and customers are not satisfied.
View 1 Replies View RelatedUnder plesk 12.0.18, I would like to create thousand email address with redirect and send copy to. Its a long work to do.
Is there a solution to create all these email via an import csv, xls or else ?
I'm using latest plesk with ubuntu 12.04, apache and nginx, gzip is enabled and working fine, except for JS and CSS files wich have version parameters in the URI, for example :
[URL] ....
here is my conf in /etc/nginx/conf.d/gzip.conf :
Code:
gzip on;
gzip_disable "MSIE [1-6].(?!.*SV1)";
gzip_proxied any;
gzip_types text/plain text/css application/javascript application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon image/bmp image/svg+xml;
gzip_vary on;
Gzip is working fine for every other ressources loaded
I know i can strip these ?ver= using PHP, but if nginx could just enqueue them properly as they are...
We are trying to use the new Wordpress toolkit, but when we try to install an instance it says this:
Contact your service provider for assistance. Upgrade the system PHP CLI to version 5.3.0 or later, or set the correct path to the PHP CLI in the clipath option of the php_handler utility for a custom PHP handler.
Screenshot:
Now that would not be a problem if the requirements were not met, but there are installed PHP versions that are higher than 5.3 and the website is configured to us these versions...
# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
2 5.5.14 5.5.14 5.5 fastcgi /usr/local/php5514-cgi/bin/php-cgi /usr/local/php5514-cgi/bin/php /usr/local/php5514-cgi/etc/php.ini true
3 5.3.29 5.3.29 5.3 fastcgi /usr/local/php5329-cgi/bin/php-cgi /usr/local/php5329-cgi/bin/php /usr/local/php5329-cgi/etc/php.ini true
cgi 5.2.17 5.2.17 5 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.2.17 5.2.17 5 fastcgi /usr/bin/php-cgi /etc/php.ini false
module 5.2.17 5.2.17 5 module /usr/bin/php-cgi /etc/php.ini false
The website is using this version, and the PHP CLI is defined in the php_handler tool
I must be missing something obvious.
I have experimented a strange behaviour on plesk linux 12.0.18 Update #33
Basically:
1. I have recompiled Apache with more file descriptors
2. Several days later watchdog did not work properly. Support requested me to remove and install wd
3. I ran the autoinstaller. All my compiled version where replaced.
Watchdog is ok now, but I have to recompile Apache.
I have been searching on forum and kb but could not find any reoccurance.
Question : Is there a way to avoid this ?
Compilation performed based on article [URL]
after having executed /usr/local/psa/admin/bin/autoinstaller --debug
[root@ns7 scripts]# rpm -qa --last | grep "Sat 21 Feb 2015"
psa-watchdog-12.0.18-cos6.build1200140707.14.x86_64 Sat 21 Feb 2015 01:12:58 PM CET
php-tidy-5.3.3-40.el6_6.x86_64 Sat 21 Feb 2015 01:10:07 PM CET
[Code]....
During downloading the files for the upgrade, it is hanging at downloading the following file:
plesk.msi
When I look at the C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386 I see that the file is .tmp and cannot be deleted.
I do not know how to stop the upgrade, delete the .tmp file and download the files again.
Ok, new to Plesk, trying to move from ispconfig. So I have Plesk 12 running on Centos 6 64bit in a VPS. I figured out how to upgrade PHP and now I have installed my first website. The website is joomla based but I am getting the below error when installing components:
Warning
Copy failed.
JInstaller: :Install: Failed to copy file /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/tmp/install_55081e65af5fe/pkg_kunena.xml to /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/administrator/manifests/packages/pkg_kunena.xml
Package Install: Could not copy setup file.
This suggest to me a permissions issue - but what to do with it. I have checked all of the relevant Joomla folder permissions and they are all showing as writeable, so it looks like something outside of that?
I don't want to have to stick with ispconfig much longer ...
"What anti-virus do you use on your postfix email server powered by Plesk?".Is there an anti-virus program that can be installed on Plesk version 12.0.18 as an extension or component? I need it primarily for protection of incoming email from malware.I've seen in Add or Remove Components in the Mail hosting features that I have installed Kaspersky antivirus, but I didn't seen anywhere that it actually can be configured from within Plesk. It also, as far as I can see, doesn't do anything. what is Kaspersky antivirus used for in Plesk and how can I configure it?
View 2 Replies View Related