I tryed install multiple-php version in my Plesk 12 on CentOS 6.5 using Plesk KB but it doesn't work very well so I installed php-panda and it works fine but I want uninstall the php 5.4.31 version that fail but leaving the no-atomic old version. How can I do that? I know that is installed in other directory.
View 1 RepliesI installed Nginx and PHP-FPM through the Plesk Autoinstaller.It works well with the default PHP version installed originally with the CentOS 6 system (5.3.3). I also installed manually following your KB [URL] .... additional versions of PHP. It works well, and I can use those additional versions through the Plesk UI.
Therefore, I was wondering how to use them with PHP-FPM? As when I activate a domain for Nginx with PHP process (PHP-FPM), it switches the PHP version to 5.3.3 and I can't change this parameter.
I am looking for a replacement to my existing ISPConfig 3.x installation and have heard a lot of good things about Plesk, so I decided to put up a test server with a trial version of Plesk 12.The server is running Centos 6.5 64-bit minimal install with all system updates applied before installing Plesk. After installing Plesk I used the commands from the attached text-file.After compiling PHP 5.5.20 with no errors displayed on screen I created a new subscription plan as a copy of the #default domain" plan and changed the name to "PHP 5.5 website" and in the Hosting Parameters I changed PHP to run still run as a FastCGI application but use my compiled PHP 5.5.20 instead of the OS vendors PHP 5.3.3.The configure options used are the same as I did use for my ISPConfig 3.x servers.I also tried the configure options shown here: [URL]... But the command ends with a "configure: WARNING: unrecopgnized options: --enable-fastcgi"
If I compile with the attached script I get a HTTP 500 error when visiting the selected website (which is a clean installation of Drupal 7.34) and in the error_log for my test site I get this:
"
[Sun Dec 28 18:51:48 2014] [warn] [client x.x.x.x] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sun Dec 28 18:51:48 2014] [error] [client x.x.x.x] Premature end of script headers: index.php
"
x.x.x.x is the internal IP of my router/firewall.I have also looked in the Plesk Administrator GuideIs there a known issue with Plesk 12 and CentOS 6.5 64-bit when wanting to use multiple versions of PHP, since both the version compiled using the KB article above and my own attached script worked fine on my ISPConfig 3.x servers.
I'm trying to add multiple PHP version (current version installed: 5.5.13), using the official documentation. I always get 500 Internal Server Error after switching to the new version, with the following error_log content:
Code:
[Sat Jun 07 00:49:35 2014] [warn] [client XXX.XXX.XXX.XXX] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sat Jun 07 00:49:35 2014] [error] [client XXX.XXX.XXX.XXX] Premature end of script headers: index.php
Here you can view phpinfo() obtained running php54-cgi index.php from the command line. Same script doesn't work as FastCGI.
I'm trying to add PHP 5.4.29. Here is how I compiled it:
Code:
./configure
--prefix=/usr/local/php54
--with-bz2
--with-config-file-path=/usr/local/php54/etc
--with-config-file-scan-dir=/usr/local/php54/etc/php.d
--with-curl
[code]....
Switching back to PHP 5.5.13 and the script works fine (a simple phpinfo() output).How can I try to understand/debug what's wrong with the installation?
Is it possible disable or uninstall 'WordPress Toolkit' for Plesk 12.x?
View 2 Replies View RelatedI deleted the Domain from Cloudflare but did not deactivate it before from Plesk. I add again the Domain and try to deactivate it but you can deactivate it.
(Error) CloudFlare can not delete domain.tld from this interface. your Plesk server is not the authoritative partner with CloudFlare for your domain.
What is the way to deactivate and uninstall Cloudflare?
when trying to uninstall this extension I get the following error: Executing /opt/psa/admin/plib/modules/panel-news/scripts/pre-uninstall.php failed.
View 3 Replies View RelatedI have two domains as virtual hosts on same IP address.
I am getting certificate error for the second domain when I try to check email (using MS Outlook). I can't permanently "accept" certificate, it complains again and again. Certuficate I created and self signed for imap.domain1.com, but the second email server is imap.domain2.com, so it complains.
How do I set separate email certificates for two domains? Is it possible at all?
I have installed a version of php (v5.4). My Web run correctly before and now not. My web is Joomla 2.5. I recived this error:Fatal error: Class 'JConfig' not found in /var/www/vhosts/*********/httpdocs/includes/framework.php on line 56.
View 1 Replies View RelatedAre that possible to have 2 version on my server?I upgrade from 5.3 to 5.4 yesterday but 2 site is down after upgrade of php.And i need 5.4 for 1 site and 5.3 for this other.
View 2 Replies View RelatedI've tried a few times to update php on my server from version 5.3 to the latest 5.5 however it keeps conflicting with apache2 that's installed and I ended up having to re-install everything as I accidentally deleted Plesk attempting to fix it.
Ideally I'd rather just run nginx with php-fpm without apache but it's not as straightforward anymore with plesk and how to go about updating PHP?
I've got a clean install of Parallels Plesk v12.0.18_build1200140606.15 running on Ubuntu 12.04.2 LTS.
how can i show in putty during ssh session the version of wordpress used for a specific domain ?
View 4 Replies View RelatedI'm still using Plesk 11.5.30 and MySql 5.5.39. That was discribed here how to update. But i need to have a MySql 5.6.5 (minimum) for some software (This version is over 2 years old). I'm using CentOs 6.5. and PHP 5.4.33
how to do this, whitout breaking plesk 11.5.30??
I have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....
When I click upgrade now at the plesk panel I get following error:
Parallels Panel pre-upgrade check... WARNING: The proftpd FTP service will fail to start in case the support for IPv6 is disabled on the server. Please check [URL] .... for details.
Is it safe to proceed? I guess it shall be automatically?
I'm new to Plesk - I've inherited a web site for a local social club so have just been handed login and password. I believe I have version 11.0.9 and as I can see mention of an Apache webserver I'm guessing its linux.
So - I want to redesign and use Joomla so I can share the content updating with others.
I can't install Joomla as I have PHP 5.1 and need 5.3. I have no 'server' or any sort of option I can find (and I've looked everywhere!) to find a command line or somewhere I can run things.
When I try to allow SSH access the option says Forbidden and there is no option to change it.
Using Plesk 12.0.18 and CentOS 6.6, I installed PHP 5.6 through the Plesk Updates menu. After that, the new version was not automatically selectable inside Plesk Panel. I added it using php_handler.However, when selecting PHP 5.6 for a website, I only get a 500 server error.
Trying to troubleshoot, I ran "/opt/plesk/php/5.6/bin/php-cgi -v", which also resulted in an error:Fatal Error Unable to allocate shared memory segment of 67108864 bytes: mmap: Cannot allocate memory (12)The same kind of error is logged in the error_log for the website I switched to 5.6.
The error also occurs when calling "php-cgi -v" directly in the command line.The same error occured when I tried the same thing with PHP 5.5.
i notice in the release notes for 11.0.9 update #63 that the 'internal php version is updated to 5.3.29'.i have been using php 5.4 for some time now (installed outside of plesk since php 5.4 it's over 3 yrs old now and php current versions are 5.7 now...).
IF i would install this update #63, is it going to DOWNgrade my php in use on the server for all of my sites? then i'll have to re-upgrade after installing #63. and if yes, when i install #64, #65, etc... do i have to do that from now on? how this automated update works under the covers so i can get the security updates without downgrading my php version in the future unintentionally.
I have received notices from several customers with this error and I checked myself. When trying to connect to a ftp hosted on my server with Plesk gives an error expired certificate, a certificate of Parallels. The solution I've found is to configure access without TLS but says it is unsafe and customers are not satisfied.
View 1 Replies View RelatedAfter the micro update, the database copy function started to hung even just for copying database with 4 tables with less than 10 rows of recrods. Although I followed the link below to remove the hung database copy and remove the unfinished database copied. URL....However, no successful database was copied at all even after the timeout was adjusted.
View 1 Replies View RelatedI'm using latest plesk with ubuntu 12.04, apache and nginx, gzip is enabled and working fine, except for JS and CSS files wich have version parameters in the URI, for example :
[URL] ....
here is my conf in /etc/nginx/conf.d/gzip.conf :
Code:
gzip on;
gzip_disable "MSIE [1-6].(?!.*SV1)";
gzip_proxied any;
gzip_types text/plain text/css application/javascript application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon image/bmp image/svg+xml;
gzip_vary on;
Gzip is working fine for every other ressources loaded
I know i can strip these ?ver= using PHP, but if nginx could just enqueue them properly as they are...
We are trying to use the new Wordpress toolkit, but when we try to install an instance it says this:
Contact your service provider for assistance. Upgrade the system PHP CLI to version 5.3.0 or later, or set the correct path to the PHP CLI in the clipath option of the php_handler utility for a custom PHP handler.
Screenshot:
Now that would not be a problem if the requirements were not met, but there are installed PHP versions that are higher than 5.3 and the website is configured to us these versions...
# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
2 5.5.14 5.5.14 5.5 fastcgi /usr/local/php5514-cgi/bin/php-cgi /usr/local/php5514-cgi/bin/php /usr/local/php5514-cgi/etc/php.ini true
3 5.3.29 5.3.29 5.3 fastcgi /usr/local/php5329-cgi/bin/php-cgi /usr/local/php5329-cgi/bin/php /usr/local/php5329-cgi/etc/php.ini true
cgi 5.2.17 5.2.17 5 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.2.17 5.2.17 5 fastcgi /usr/bin/php-cgi /etc/php.ini false
module 5.2.17 5.2.17 5 module /usr/bin/php-cgi /etc/php.ini false
The website is using this version, and the PHP CLI is defined in the php_handler tool
I must be missing something obvious.
I have experimented a strange behaviour on plesk linux 12.0.18 Update #33
Basically:
1. I have recompiled Apache with more file descriptors
2. Several days later watchdog did not work properly. Support requested me to remove and install wd
3. I ran the autoinstaller. All my compiled version where replaced.
Watchdog is ok now, but I have to recompile Apache.
I have been searching on forum and kb but could not find any reoccurance.
Question : Is there a way to avoid this ?
Compilation performed based on article [URL]
after having executed /usr/local/psa/admin/bin/autoinstaller --debug
[root@ns7 scripts]# rpm -qa --last | grep "Sat 21 Feb 2015"
psa-watchdog-12.0.18-cos6.build1200140707.14.x86_64 Sat 21 Feb 2015 01:12:58 PM CET
php-tidy-5.3.3-40.el6_6.x86_64 Sat 21 Feb 2015 01:10:07 PM CET
[Code]....
"What anti-virus do you use on your postfix email server powered by Plesk?".Is there an anti-virus program that can be installed on Plesk version 12.0.18 as an extension or component? I need it primarily for protection of incoming email from malware.I've seen in Add or Remove Components in the Mail hosting features that I have installed Kaspersky antivirus, but I didn't seen anywhere that it actually can be configured from within Plesk. It also, as far as I can see, doesn't do anything. what is Kaspersky antivirus used for in Plesk and how can I configure it?
View 2 Replies View RelatedHere my msg. i get while trying to update via the Panel:
Code:
Unable to obtain the latest version of Parallels Installer: The required version '3.15.15' was not found on the server. This could happen because of configuration error at the download site. Failed to download the package
[URL] ....
The requested URL returned error: 404
Running Debian 7
PV: 11.5.30 Update #11
What steps do I need to take to uninstall Parallel Plesk 11 for Windows. Then Reinstall Parallel Plesk 11 for Windows. Because my "File Manager" got corrupted, my download link timesout and I need this fixed.
View 5 Replies View RelatedI have a list of bad Ips and would like to add it into iptables, but I don't went to enter one-by-one or by command line, I would like to insert into list file of iptables editing a file or something like that, where and how I can procedure to do this?
View 5 Replies View RelatedI have plesk running on virtual machine on SSD drive but some web pages required large storage therefore I added second spinning hdd and mounted it into the file system.
How this could be used within plesk? I was trying symlink but that was not supported by FTP and apache.
I am running Plesk 12.0.18 on Centos 6.4
I have noticed that the CPU on my VPS maxes out. This occurs when there are many concurrent visitors to any of the 7 domains. 6 of the domains run Wordpress and 1 runs php-bb forum. When I run top during high cpu I see multiple "php-cgi":
32664 xxxx 30 10 211m 38m 8228 S 21.0 0.9 0:03.70 php-cgi
32675 xxxx 30 10 209m 38m 7992 S 25.8 0.9 0:02.08 php-cgi
30809 apache 30 10 422m 98m 2492 S 8.8 2.2 0:18.07 httpd
Looking at the process
PID TTY STAT TIME COMMAND
32664 ? SN 0:01 /usr/bin/php-cgi -c /var/www/vhosts/system/websitex.com/etc/php.ini
The net result is CPU hits 100% and visitors are greeted with Service Unavailable ...
Output from /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
cgi 5.3.3 5.3.3 5.3 cgi /usr/bin/php-cgi /etc/php.ini false
fastcgi 5.3.3 5.3.3 5.3 fastcgi /usr/bin/php-cgi /etc/php.ini false
module 5.3.3 5.3.3 5.3 module /usr/bin/php-cgi /etc/php.ini false
On a plesk11 server (migrated from plesk9) I see multiple locations for the logfiles:
/var/www/vhosts/<DOMAIN>/logs
/var/www/vhosts/system/<DOMAIN>/logs
They don't seem to be (hard)linked. Why store logfiles on 2 different locations? Is there a way to make this more efficient?