We have many hundreds of domains on our Plesk 11.5 server (Linux) but many of them do not have SSL support enabled. Any script that would enable it for all domains and subdomains on our server, to save the tedious time of manually checking every domain?
View 2 RepliesIs it possible to enable NLS support in psa-proftpd package?
root@server :]> proftpd -V | grep NLS
- NLS support
Is it possbile for proftpd to support not English filenames ( for example russian, greek etc )?
I just have started to setup a web-environment using Plesk 12 on Ubuntu 14.04LTS.
I have the following problem:
I have setup a service-plan that enables Apache ASP. When I try to create a webhosting using this service-plan I run into a message saying that the service-plan tries to ENABLE ASPs, but the available setting is DISABLED (only option) and the webhosting will be setup with ASP DISABLED (and the webhosting will be out of sync with the service-plan).
Trying to figure out the reason for this behaviour I checked the site_isolation_settings.ini (in /usr/local/psa/admin/conf/). In this file asp is set to on (no comment sign on start of the line).
Then I looked for the custom view settings for the power user view (which I am currently not using - I use the service provider view): In the hosting parameters ASP is ticked.
After that I checked the installed (and installable) features of Plesk; especially the Web-Hosting-Features. Surprisingly I noticed there is no option to install Apache ASP support!!!
Remark: I installed Ubuntu 14.04LTS Server in minimal configuration (SSH-Server configuration) directly after that I started the Plesk installation...(might this be the reason?)
How can I make Apache ASP work?
FTP is a very old transfer technology with a lot of security problem.
Why don't enable directly SSH or SFTP on Plesk by default or by a simple way?
It's very difficult to enable it now
I'm loosing a lot of time to find how to enable it on plesk 12 and still not undestanding why do not work.
I've followed this: [URL] .... but my server still say's that it's using prefork
/usr/sbin/httpd -l | egrep "prefork|worker"
Code:
~]# /usr/sbin/httpd -l | egrep "prefork|worker"
prefork.c
httpd -V
[Code]....
It's possible to enable HHVM on debian host with plesk?
View 1 Replies View RelatedHow to can I verify if gzip is enable? And if not, how can I active/install mod deflate/gzip under plesk 12?
View 8 Replies View RelatedI have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedWhere I can find option for enable multiple log in for admin account?
View 6 Replies View RelatedHow to enable in Plesk 12 directory index ( view and/or listening and/or browsable )...
View 5 Replies View Relatedwant enable mssql_connect on php
plesk panel 11.0.9
centos
I want enable mssql_connect for php.
I need php imap extension for my server. How can I enable it?
View 3 Replies View RelatedI'm using on virtual machine the last version of PLESK 11.5.3 update #42 and UBUNTU 12.04.4 LTS provide by a main Italian ISP, the MySQL version is 5.5.35-0ubuntu0.12.04.2.I'm trying to enable the local-infile option in the /etc/mysql/my.cnf file:
[client]
local-infile = 1
[mysqld]
local-infile = 1
When I'm restarting mysql service (with command "service mysql restart") the PHP script works correctly and "SHOW GLOBAL VARIABLES" results "ON", but when server reboot or some hours by the restart the PHP script return to not work correctly and appear the standard messagge: "The used command is not allowed with this MySQL version".Maybe the problem is the start of mysql on boot? I haven't any errors in the mysql or system log!!
how to enable clean url (mod_rewrite) with Plesk and Website with Drupal 7 ?
View 1 Replies View RelatedI've tried to enable https on a domain /server: vpn, debian 6.0.10, plesk 12.0.18/ but all I receive is a 403 forbidden error. I can't find any other related option, what could be the problem?
View 4 Replies View RelatedIs it possible to control if nginx is active on a per domain basis? If so, how do we configure this. If not, how do we disable nginx completely?
View 3 Replies View RelatedI just have installed plesk panel and when i get to the "Firewall" tool, then clicked on "Enable Firewall Rules Management", proftpd has stopped working properly.URLs....I have preinstalled the server 2 times, and every time i try to edit the firewall rules, proftpd got broken.
View 10 Replies View RelatedI migrated many domains to a Plesk 12 with lot of email accounts. I need to find a way to mass enable antispam and DR.Web anti virus.
How can I enable to all accounts the antispam with certain parameters Ex. 5 Points and Mark **SPAM** _SCORE_ in the subject and also enable Dr.Web for incoming email.
I have a Plesk 12 server running under Debian 7. I have a website with only mail so I disable web hosting. The problem is that the client needs to use webmail but webmail does not work (maybe because web hosting is disabled)...
View 1 Replies View RelatedI have been trying to enable server-wide compression using deflate.My server is running a fresh install of plesk panel 11 installed over a fresh centos 6 64. The configs and settings (aside from files I mention) have not been changed at all from default.
I have created a new file in /etc/httpf/conf.d/deflate.conf This file is being included when Apache is restarted, so that's definitely working and the html doc compresses. But not matter what I do (I have tried every combination Google would find) css and js files will not compress. At my previous workplace we also used a Plesk server and nobody could ever get compression working there either.
how to automatically enable nginx by default for all domains/subscriptions and or even just as a whole since we do not use apache at all.
View 18 Replies View RelatedI am not able to enable the recidive jail in Fail2Ban. I get the following error:
Code:
Unable to switch on the selected jails: f2bmng failed: WARNING 'ignoreregex' not defined in 'Definition'. Using default one: ''
ERROR No file(s) found for glob /var/log/fail2ban.log
ERROR Failed during configuration: Have not found any log file for recidive jail
ERROR:f2bmng:Command '['/usr/bin/fail2ban-client', 'reload', 'recidive']' returned non-zero exit status 255
ERROR:f2bmng:Failed to reload following jails due to errors in configuration: recidive
.
There is indeed no /var/log/fail2ban.log, but I doubt that manually creating it will correctly fix this problem.
The problem is also discussed @ [URL] ...., but in my case I have not switched on jails before switching on fail2ban. Also, the given resolution does not work.
I have an error that has arisen me for no apparent reason. This error does not allow me to enable or disable DNS domains. I searched for solutions but have not found anything.
The error message is: ERROR: Call to undefined method plesk__client__domain__dns__toggle::_postRequestRequired() (DNSToggleUIPointer.php:26)
And as I said DNS appears when activated or deactivated by the domain from Plesk panel
Version: 11.5.30 #48
Does Parallels support Plesk 12 being installed on a Linux VM that is provisioned on Microsoft Windows Server 2012 R2 Hyper-V?Is it fully supported?
View 2 Replies View RelatedI am having a lot of problem in implementing mod-rewrite in the Apache 2.0 server due to its configuration that it has the Virtual Directory Support "Disabled".
I got this information from the function phpinfo() which displays a lot of other configuration values along with that.
Now I am unable to enable this Virtual Directory Support in the server and for this my mod-rewrite through .htaccess is not working at all.Subhasis
I freshly installed Plesk 12.0 on Ubuntu 14.04. Everything works accept the MySQL database creation.
When I try to create one, i get this error :
error: the test connection to the database server has failed because of network problems: connection refused...
In my Plesk 12.0, I installed support por PHP 5.3, and 5.4. But when I go to configure my site, I only can select these versions if I put PHP like FastCGI:
But in "Apache Module" I only can select PHP 5.3.3:
My WebSite doesn't work with FastCGI, only with "Module Apache".
Why I cannot select 5.3.29 with "Module Apache".
I'm running plesk 12.0.18 on centOS 6.6 and I have some problems with ipv6 support for a domain. This is what I see in my apache logs for that domain:
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:44:55 +0200] "GET /hello.html HTTP/1.0" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:49:39 +0200] "GET /hello.html HTTP/1.0" 200 384 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
2001:8d8:90b:c900::2a:19d1 is the ipv6 from my server, and it appears there because of nginx working as reverse proxy.
As you can see, facebook can't get /hello.html (404 response), but I can get it from another server using curl (200 response). I tried disabling nginx and this is what I see now:
2a03:2880:2110:dff3:face:b00c:0:1 - - [29/Jun/2015:17:55:11 +0200] "GET /hello.html HTTP/1.1" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:8b3:6000::4e:c5a0 - - [29/Jun/2015:17:54:52 +0200] "GET /hello.html HTTP/1.1" 200 361 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
Still not able to get /hello.html. This is a problem for me because I can't share anything on facebook, since their bot can't find anything on my site.
I've already configured ipv6 for my domain.
We noticed that for now only Plesk 12 supports RHEL / CentOS 7. Is support for EL 7 planned for Plesk 11.5?
View 13 Replies View Relatedif I disable SSL on Plesk server some days/weeks later it is activated again.
To disable SSL I use the script from Parallels in this post: [URL]
After running this script to deactivate SSL I did some checks to verify if its deactivated and it definitely was deactivated.
I guess that SSL is activated again by the parallels updates or micro updates.