i just sign up for geekstorage.com i want to host my magento online store but since they dont provide one click install for magento i am abit lost i dont no how to install it? so if any of you know any easy way to install it in geekstorage.com
When I try to install Magento 22.214.171.124 I get the error message;Error: Installation of magento at http://mydomain.com/ failed. Non-zero exit status returned by script.Can't seem to get any more information into what might be causing this issue...
I have customers that want the git program to be able to pull/push their github repos. I've copied all of the files in the git rpm into the site's chroot but whenever they try to pull down their repo via ssl they get this message:
error: while accessing https://github.com/USERNAME/PROJECT.git/info/refs
fatal: HTTP request failed
We have gotten ssh to work with git but the ssl issue still isn't working.
I'm new to Plesk - I've inherited a web site for a local social club so have just been handed login and password. I believe I have version 11.0.9 and as I can see mention of an Apache webserver I'm guessing its linux.
So - I want to redesign and use Joomla so I can share the content updating with others.
I can't install Joomla as I have PHP 5.1 and need 5.3. I have no 'server' or any sort of option I can find (and I've looked everywhere!) to find a command line or somewhere I can run things.
When I try to allow SSH access the option says Forbidden and there is no option to change it.
I would like to install APCu (Alternative PHP Cache) & ZendOptimizer on plesk v12, I just wanted to know if there is any instructions for installing it correctly in a manner that will not cause issues with plesk updates.
According to: URL....I tried to install php 5.3...Before able to .configure php source, i must install several dependencies. I resolved most of them but installing libmcrypt-devel gives the following error:
i use Plesk on a vserver which was offering it in version 11.x, i upgraded to 12.0.18, then i installed Dovecote on the panel. Everything went fine. Mail server is working.BUT sieve does not allow me to login and create filters.I tried telnet against 4190, and it works:
Connected to mail.xxxxxxxx.xxx. Escape character is '^]'. "IMPLEMENTATION" "Dovecot Pigeonhole" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify" "NOTIFY" "mailto" "SASL" "PLAIN LOGIN DIGEST-MD5 CRAM-MD5" "STARTTLS" "VERSION" "1.0" OK "Dovecot ready."
But when i use my sieve plugin for thunderbird OR access plesk's webmailclient Roundcube opening the filter module, it doesnt work. On Thunderbird i see the loading animation, thats it. On Roundcube it says "Unable to connect to sieve server".
Looks like something is missing. I can definitely access 4190 on my server from anywhere. So no firewall issue. I didnt change anything on configs, since plesk is handling it.Roundcube log doesnt give me anything. I dont even see logs added (to syslog or mail.*) while i try to connect.
For some application-testing I installed PHP 5.5 and PHP 5.6 alongside the existing PHP 5.3 installation. To do that I used the web-interface of the Plesk-installer.
Installing the software went well, or at least didn't show any errors.
After installing I went back to the login-page to get back into the portal, but that didn't work.
I am using the right username and password and don't see any errors, I just keep getting the login-screen and no errors. Logging in through SSH is working as it should. Only access to Plesk on 8443 seems to be denied.
Server reboot didn't work, restarting Plesk-services didn't work...
How can I restore this so I can get back to work?
This Plesk-installation is on a CentOS 6 server on which I have full rights.
I have Plesk Panel 11.5.30 # 48 installed on my rented vServer, which is virtualized with Parallels Virtual Automation / Plesk Power Panel. I cannot upgrade to Plesk Panel 12.x because my contract just includes a license for 11.x.
Installing fail2ban 0.8.6-3wheezy3 trough Power Panel works, but installing its configurator "plesk-fail2ban-configurator 12.0.18-debian7.0.build1200140526.11" fails.
Operation with the Container "*.*.de" is finished with errors: Can not install packages: ' vzpkg install -q -p * plesk-fail2ban-configurator' exec failed - W: Failed to fetch http://autoinstall.plesk.com/debian/NGINX1.5/dists/wheezy/all/binary-amd64/Packages 404 Not Found W: Failed to fetch http://autoinstall.plesk.com/debian/NGINX1.5/dists/wheezy/all/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. Error: /usr/bin/apt-get failed, exitcode=100 Error: Can not update metadata for pp11.5-nginx. Skipped. E: Unable to locate package plesk-fail2ban-configurator Error: /usr/bin/apt-get failed, exitcode=100 . Click to expand...
I'm testing out the old version of CentOS which is CentOS 2.1 on Virtual PC and I'm running into some problems. After installation of CentOS, it asks me to reboot the system so then I reboot it. Then it prompts me for the login and password.
I type in "root" and my password. Then I'm stuck inside this command prompt that says:
Now, how exactly do I get into CentOS graphical user interface, or is this it?
I'm trying to install imagemagick on centos using yum... I did the yum update, then tried 'yum install ImageMagick', but that didn't work - "Nothing to do". I also tried the i386 RPM, which also did not work, I'm missing a bunch of dependencies, has anyone installed this on CentOS know of a specific rpm or another way to install? Ideally, without installing through source.
I followed a combination of this tutorial:[URL]and this tutorial [URL] (I had to use a combination since following each individually brought up errors along the way).
Anyhow, installing OpenVPN was a breeze but I think I am getting hung up on the configuration part. Basically after generating all of the certificate files and stuff, when i try to "service openvpn start" i just get the message "FAILED".
Where do I look to see what the reason for the failed start could be?
I decided to go with Cent OS after reading about it in the forums here, but I've had nothing but problems trying to install it. I first tried to do a net install but the installation took nearly an entire day because it would keep popping up messages about corrupt files when downloading the package files. Eventually it just gave up or rebooted because I came in in the morning to find it at a message saying "No OS installed". I then burned all 7 installation disks and tried that way, still got a few of the corrupt file messages (but far fewer than the previous time) and made it through the installation only to still have it say "no os installed" again after the reboot. I thought maybe it had something to do with the fact that I was not installing a boot loader (there is no other OS installed anyways) but when I tried to reinstall a third time, this time with the boot loader, it now says that the CD drive (USB) is already mounted on tty2 and I can't even start the installation? WTH!
The server is a Dell PowerEdge R300 with two Intel Core 2 Duo 64-bit processors. I'm using the x86_64 ISOs from the Centos.org mirrors.
I've got a 'virgin' machine from Nocster running CentOS 5, including a SATA drive (shows up as "SCSI").
It looks like it'll be a straight-forward install [url], but I wondered if anyone has had this exact combination before and if there are any problems I should expect? Given that it's a dedicated machine I don't have physical access to, I'm slightly paranoid about screwing up.
how to install CentOS by not using the installer. This guide should be great when installing over networks, don't have a graphical console available (for installing over serial), when you're not content with the installer's job, installing CentOS from another distro, or plainly want to learn more about how CentOS works.
Requirements: * Have a host OS that has the "rpm" package manager available. Some distributions have it in their repositories (even if the package manager for the distro itself is not rpm), and knoppix (a linux live/rescue CD) has it aboard too. You can use the first CentOS ISO CD too (use linux rescue at boot), and it has all the necessairy packages aboard * Access to the CentOS base repository. It's on the first CentOS ISO CD * Use your BRAIN. This guide is ment to be interpreted, not copy/pasted
Code: # First, setup your disks to your liking. You can use whatever you want here, # RAID, LVM, etc... Remember your disk configuration because you'll need it # to configure grub, menu.lst and fstab. Using RAID, LVM, or others will require # more configuration than this guide covers. To keep it simple I'm using a # single disk. An example:
$ fdisk /dev/sda $ mount /dev/sda3 /target $ mkdir /target/boot $ mount /dev/sda1 /target/boot
# Depending on the host OS you're using, you may need to initialize the rpm db # on the host OS $ rpm --initdb
# Use the following command to install the packages. I'll be addressing this # command as $rpm.
$ rpm --root /target -i
# Use your shell's tab completion to complete the package filenames. I # deliberatly left out the versions so these instructions apply to a wide range # of versions
# Let's install some basics $rpm setup basesystem filesystem
# Install bash first, this is needed for post-install scripts $rpm bash glibc glibc-common termcap libgcc tzdata mktemp libtermcap
# Install some dependencies (this is mainly to keep the next command smaller) $rpm grep pcre libstdc++ info ncurses zlib gawk sed ethtool
# If this command gives an error, you can safely ignore this because it's not # of importance. What is important is that grub-install copied the right files # to /boot/grub that we need for booting. $ /sbin/grub-install /dev/sda
# Manually install grub if the previous step failed. - means type it in the grub # shell $ grub $- root (hd0,0) $- setup (hd0)
# Optional packages # You may want to install passwd so you can set passwords ;-) $rpm passwd libuser openldap cyrus-sasl-lib
# These are used to set the keyboard language (loadkeys) $rpm kbd usermode
# ** Right now you should have a bootable system! Here are some tips to help you # through your 1st boot ***
# Most of the system configuration happens in /etc/sysconfig. See
for full documentation.
Some quick post-install tips: * Configure your keyboard in /etc/sysconfig/keyboard using the KEYTABLE variable
* Configure networking Take a look at /etc/sysconfig/network-scripts. See ifcfg-lo for an example.
# This recreates the RPM database. If the host OS you used has a different # version of db, rpm will complain with # rpmdb: unable to lock mutex: Invalid argument $ rpmdb --rebuilddb
Code: [root@server ~]# sh ./hypervm-install-master.sh --virtualization-type=openvz Here is the output it's returning to me (From log file)
Code: Installing packages which lxlighttpd zip unzip lxphp lxzend curl mysql mysql-server mysqlclient10... Setting up Install Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package lxphp.i386 0:5.2.1-90 set to be updated ---> Package lxzend.i386 0:3.3-lxa set to be updated ---> Package lxlighttpd.i386 0:1.4.13-1 set to be updated --> Running transaction check --> Processing Dependency: libmysqlclient.so.14(libmysqlclient_14) for package: lxphp --> Processing Dependency: libmysqlclient.so.14 for package: lxphp --> Finished Dependency Resolution Up2date Gave Error... Trying Again...
Just to make things clear, i am not new at setting up VPS nodes, i have set up all of my servers with the HyperVM/OpenVZ setup and they work perfectly, but im having a problem with a new server.
Just received my new server, installed HyperVM-Slave, rebooted but the OpenVZ kernel was not installed for some reason, so i manually installed the OpenVZ Kernel using the RPM as yum seemed to install the wrong kernel.
I then installed the kernel using RPM and got this error at the end of installation:
grubby: unable to open /dev/hda: No such file or directory grubby: unable to open /boot/boot.b: No such file or directory grubby fatal error: unable to find a suitable template
I have never encountered this error with any of my other servers before...
Also after installation everything seems to be correct. /etc/grub.conf has the new OpenVZ kernel displayed, and default is set to 0, so upon startup it should be booting the correct kernel, but the thing is, when i reboot the machine the default kernel is loaded even though the grub.conf is configured to load the OpenVZ Kernel.
Im thinking that this may be due to the error i got when installing the kernel.