Plesk 12.x / Linux :: CentOS 6.6 - Postfix SASL Auth Fail

Jan 17, 2015

I've just setup CentOS 6.6 with Plesk at my Hoster OVH. Now when I want to connect to the smtp server I get following message:

Code:
SASL LOGIN authentication failed: encryption needed to use mechanism
SASL auth is enabled in the main.cf also submission. I connect to tls://smtp.example.com:587 with my email and password.

View 2 Replies


ADVERTISEMENT

Plesk 12.x / Linux :: Dovecot And Postfix - SASL Auth And TLS?

Sep 15, 2014

Ubuntu 14.04 with Plesk 12 (10 Domain License).Using this for mail only... multiple domains.Postfix and Dovecot installed. Trying to figure out how to do:

- SASL Auth (Dovecot)
- TLS
- want above two to be mandatory... no plain text auth and no unencrypted connections.

How do I achieve this with Plesk 12?I have found countless how-to's about doing this with Vanilla (non Plesk) installs with the same server software. However, Postfix main.cf and master.cf both appear to have specific Plesk modificatuons. Same thing for the related Dovecot conf files... also have Plesk specific modifications.

I see no way to enable the desired settings from the Plesk Panel. Can't achieve this within the Panel but also can't modify the conf files without potentially breaking some Plesk-specific functionality? My original hope in purchasing the Plesk license was to make administration of the mail server easier. Unfortunately, I'm struggling to do this now and may have already had this figured out had I not bothered with the Panel.

View 1 Replies View Related

Plesk 11.x / Linux :: Postfix Smtp SASL Authentication Failure

Jan 24, 2013

I have a new Plesk 11.0.9. #34 server with Centos 6.3 64bit.

I made a few changes in order to be PCI Compliant.

I created a domain and try to send email with no luck.

----------Maillog------------
Jan 24 16:01:28 server7 pop3d-ssl: Connection, ip=[::ffff:X.X.X.X]
Jan 24 16:01:34 server7 pop3d-ssl: IMAP connect from @ [::ffff:X.X.X.X]ERR: LOGIN FAILED, ip=[::ffff:X.X.X.X]
Jan 24 16:01:34 server7 pop3d-ssl: Unexpected SSL connection shutdown.
Jan 24 16:01:48 server7 pop3d-ssl: Connection, ip=[::ffff:X.X.X.X]

[Code] ....

As you can see from the logs, the pop/imap connection is successful. I login to webmail with the username/password successfully. I can't send from Outlook/thunderbird etc.

Tried to rebuild emails with /usr/local/psa/admin/sbin/mchk --with-spam but no luck.

View 15 Replies View Related

Plesk 12.x / Linux :: Sending Mailing List With Mailman Postfix - Centos 6.5

Sep 11, 2014

we are in this situation:

OS: CentOS 6.5 (Final)
Plesk version: 12.0.18 Update #16, last updated at Sept 11, 2014 04:07 AM
PHP: 5.4.32

we created a new mailing list test1@domain.tld and we tried to send a message, as administrator, to the list and to the temporary users subscribed.But Mailman dones't send anything ! And we receive this error:

Sep 11 15:20:00 2014 (30314) All recipients refused: {'admin-mailinglist@domain.tld': (554, '5.7.1 <admin-mailinglist@domain.tld>: Relay access denied')}, msgid: <mailman.0.1410441595.30312.test1@domain.tld>
Sep 11 15:20:00 2014 (30314) delivery to admin-mailinglist@domain.tld failed with code 554: 5.7.1 <admin-mailinglist@domain.tld>: Relay access denied
Sep 11 15:20:00 2014 (30314) SMTP session failure: 550, 5.7.1 Command rejected, msgid: <mailman.2.1410441595.30312.test1@domain.tld>

All other services on this server seems to be ok, normail email sending, receiving, http... all right... but mailman no.

View 3 Replies View Related

SASL Authentication For Mail Server (Sendmail/Postfix)

Mar 18, 2007

I recently moved to virtual dedicated hosting for my website, mainly because I wanted a better mail server to work with to manage a mailing list.

I have a few PHP software scripts for different things: managing affiliates and email marketing.

I want to send mail using both of those via SMTP on my new server. They both have a place to type in the host and username/password.

The problem I am noticing is SASL Authentication. They attempt to connect to the host without any trouble. However, the affiliate software fails SASL Authentication every time I try to send an email or test the email system.

Email marketing software connects when I manually send a campaign. However, users are supposed to immediately receive a confirmation mail upon opting in. In this case, it shows up as an attempt in the mail log, but it fails SASL Authentication. I don't know if it's a problem with the software or not, since it attempts to connect but fails, yet connects successfully in other cases.

My question is this: Is there another way around this? I've contacted my host to double check on the appropriate username/password to pass authentication. I will also be contacting the software developers after I receive an answer.

But if nothing comes of it, is there any way around it? Is there a place where I can have it automatically authenticate if the email is coming from a certain user, or if the attempt is being made from the same server (everything sits on the same server, I use localhost in the software to connect to the mail server). Since I am the only person who has access to the server and uses it, it seems safe to automatically authenticate if the request is being asked by the server itself...

I'm just looking for other alternatives if the software does indeed have a problem and I cannot figure it out.

Keep in mind I am very new to all this server and root access. Just a few days ago I was on a shared hosting plan, so I didn't have any access to anything. With that in mind, I know very little about mail servers, although I've been learning more over the past few days. I only stumbled upon the mail logs on my server recently by browsing files in the control panel (I'm not familiar with SSH, although I do have access to it)

View 0 Replies View Related

Plesk 12.x / Linux :: Unable To Get Fail2Ban SASL Filter To Work

Dec 3, 2014

I'm getting the following attempts every few minutes, I'd to put a stop to it with Fail2Ban but so far I've been unsuccessful. I get no IP bans in the Fail2Ban panel in Plesk 12.

Dec 3 23:24:14 XXX postfix/smtpd[2535]: warning: ca215.calcit.fastwebserver.de[146.0.42.84]: SASL LOGIN authentication failed: authentication failure

/etc/fail2ban/filter.d/sasl.conf
# Fail2Ban filter for postfix authentication failures
#
[INCLUDES]

[Code]....

View 5 Replies View Related

Plesk 12.x / Linux :: Postfix CPU Usage Increases Then Postfix Doesn't Answer

Jul 2, 2014

My issue started ince a couple of months seemed to increase with update to Plesk 12.0 (though I can't guarantee it).I am using Centos 6.5, all updated. What happens is that postfix usage starts to increase without any apparent reason (during week-ends for example). Then postfix is not responding anymore.

Code:
top - 13:27:13 up 3 days, 18:44, 0 users, load average: 0.73, 0.33, 0.32
Tasks: 238 total, 2 running, 236 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.6%sy, 0.1%ni, 98.7%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 32917292k total, 8982212k used, 23935080k free, 1899416k buffers
Swap: 1046520k total, 0k used, 1046520k free, 4905884k cached

[code]....

View 1 Replies View Related

Postfix SMTP Auth (Relay) Problem

Apr 2, 2009

I've been trying to set up Postfix to send email for the past few days. I've managed to get it to ask for a username and password, in order to try and send mail to an external domain

I can receive email fine on the server, but I can't send email out

Here is my main.cf file

Code:
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
unknown_local_recipient_reject_code = 550
mynetworks = 127.0.0.0/8 192.168.3.0/24
smtpd_recipient_restrictions = permit_mynetworks permit_inet_interfaces permit_sasl_authenticated reject_unauth_destination
mynetworks_style = class
smtpd_sasl_auth_enable = yes
allow_untrusted_routing = yes
relay_domains =
smtpd_client_restrictions = permit_mynetworks permit_inet_interfaces
smtpd_sasl_application_name = smtpd
smtpd_sasl_local_domain = $mydomain
smtp_sasl_mechanism_filter = !plain, static:rest
broken_sasl_auth_clients = yes
smtp_sasl_mechanism_filter = login
myorigin = literatifoundation.org
mydomain = literatifoundation.org
myhostname = literatifoundation.org
mydestination = $myhostname, localhost.$mydomain, $mydomain

When I try to login to send the email, it doesn't accept the password.

View 0 Replies View Related

Plesk 12.x / Linux :: Dovecot Cannot Auth In AWS AMI

Jun 28, 2015

This is a fresh installation in AWS using AMI for Plesk 12.

When installed with Dovecot I got this error when trying to login to mail:

Jun 28 12:23:44 server1 dovecot: imap-login: Disconnected (auth failed, 1 attempts in 2 secs): user=<someuser@xxxxx.com>, method=DIGEST-MD5, rip=127.0.0.1, lip=127.0.0.1, secured, session=<mfryjpUZdgB/AAAB>

If I switch to Courier works perfect:

Jun 28 12:35:53 server1 courier-imapd: Connection, ip=[::ffff:127.0.0.1]
Jun 28 12:35:53 server1 courier-imapd: LOGIN, user=someuser@xxxxx.com, ip=[::ffff:127.0.0.1], port=[35677], protocol=IMAP
Jun 28 12:35:53 server1 courier-imapd: LOGOUT, user=someuser@xxxxx.com, ip=[::ffff:127.0.0.1], headers=0, body=0, rcvd=52, sent=156, time=0

In normal servers or under Virtuozzo (formerly Parallels Cloud Server) Dovecot works without problem.

View 1 Replies View Related

Plesk 12.x / Linux :: FTPs With TLS / SSL - AUTH Not Understood

Mar 22, 2015

I just migrated from a CentOS 5 server with Plesk 11.5 to a new server with CentOS 6.6 Plesk 12.

All customers, resellers, domains, subscriptions and even FTP users have been migrated fine (great tool btw).

There's only one thing what I cannot get to work on the new server: FTPs (TLS/SSL), this always results in "AUTH not understood".

The security and FTP settings are exactly the same as the old server (where FTPs worked fine), so I guess something is missing on the server.

What can I do to have a proper working FTPs with TLS/SSL?

View 2 Replies View Related

Plesk 12.x / Linux :: Adding New Domain Name Fail?

Nov 23, 2014

Error: IP addresses for mail service of domain xxxxxx.com are not set

View 3 Replies View Related

Plesk 12.x / Linux :: After Every Autoupdate Mail And Ftp Fail

Dec 29, 2014

after every autoupdate mail and ftp fail. Only an psa stopall / start can solve this.

Using DEB7 Plesk 12.0.x

View 19 Replies View Related

Plesk 12.x / Linux :: Scheduled Tasks Always Fail?

Feb 17, 2015

Whenever a user in my Cloudlinux powered Plesk Panel 12 tries to use the scheduled tasks, this is the error that is emailed to them...

excel: couldn't exec `/usr/local/psa/bin/chrootsh'
excel: No such file or directory

Does not matter what the task is, same error every time.

Even something as simple as wget [URL] .....

View 10 Replies View Related

Plesk 12.x / Linux :: APSC Driver Fail During Install

Aug 18, 2014

I am trying to install plesk 12.0.18 via plesk-installer script after full purge of previously installed same version of Plesk.

Error appears:

Code:
cp: cannot stat `/lib64/libnss_*.so.2': No such file or directory
ln: failed to create hard link `/var/www/vhosts/chroot/etc/resolv.conf' => `/etc/resolv.conf': Invalid cross-device link
done
===> Cumulative APS controller upgrade (final stage) has been started.

ERROR while trying to find MySQL mysql platform driver for APSC Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again What is APSC driver and how should I fix it?

View 3 Replies View Related

CentOS Yum Fail

Apr 12, 2009

cpanel tech staff say my server

---------------

in a broken state halfway upgraded from centos 4 to centos 5. You'll need to either complete the update to centos 5 or revert to centos 4. Easyapache and some other cPanel functions require that yum be working, but "yum update" on your server currently fails due to the mix of centos 4 and 5 rpm's you have installed

---------------

i want to ask how can i fix the issue?

because i run "yum update",it fail.

View 4 Replies View Related

Plesk 12.x / Linux :: Bind SSL To IP In Postfix

Dec 6, 2014

I would like each of my clients who have a dedicated IP address and an SSL certificate to be able to use their own domain name (and own certificate) when sending mail on ports 465 or 587. I have managed to change the default certificate used by Postfix to my own server's certificate, but I want users to use their OWN IP address and SSL certificate when sending, so this is not an option.

I have been able to update Dovecot to use a specific certificate for each IP address, but I can't seem to update Postfix. I was trying to follow these instructions but my postfix master.cf was quite different than the poster's file and I didn't succeed: [URL] ....

I know many people will simply say "it can't be done" or "just get the users to use the shared IP address", but I know there must be some workaround to make this work, even if it means manually updating the config file after every Plesk update. I'm even prepared (if possible) to have Plesk abandon management of Postfix and have me manage it manually, if that's even an option.

View 1 Replies View Related

Plesk 12.x / Linux :: Postfix No Mail

Aug 20, 2014

I can't send any mail from the server. I don't get any log information about errors. Postfix is installed on opensuse 13.1.

View 3 Replies View Related

Plesk 12.x / Linux :: Fail To Connect MySQL / Database / WebAdmin - File Not Found

Mar 30, 2015

I cant connect to the Database WebAdmin. If I click the icon, i got an "File not found." in the opening tab. Back in Plesk I get the following:

ERROR: PlexkFatalException
Server id is undefined?

I even cant connect via ssh to the mysql part of my server. But the server is running and both of my two wordpress pages run smoothly. I know this page: [URL] .... – but as I sad, cant enter die mysql.

It seems something is wrong with the permissions. I'm on the point where I just want to reset everything database related. But how?

View 2 Replies View Related

Plesk 12.x / Linux :: Postfix Wants To Run On Port 587 Even Though This Is Turned OFF

Feb 25, 2015

Each migration in the last years I'm running into this bug that Postfix wants to run on port 587 even though this is turned OFF in the Plesk Panel.

Sometimes it does this after some update.

Because another process is running on port 587 this means that postfix does not start and I have some downtime until I "repair" this.

"Repairing" means going into Plesk panel and turning ON SMTP-Auth.... Wait a moment for it to apply and then turning it OFF again....

This unwanted behaviour can be easily reproduced by having this option turned off in the Plesk panel and then running /usr/local/psa/admin/sbin/mchk --without-spam

This will end up in a non-running postfix if another process is already running on port 587.

This shouldn't be happening. Especially because I reported this behaviour years ago..

View 5 Replies View Related

Plesk 12.x / Linux :: Limit-out - Postfix / Dovecot

Aug 15, 2014

on a fresh debian 7 64bit openvz system we actually have a problem with the new plesk 12 feature of limiting outgoing mails.We migrated about 25 systems to plesk, this is the first that makes problems.If limiting outgoing mails is activated (i double-checked all possible checkboxes in plesk) a fresh mailbox gives us the following error while trying to send via smtp:

Aug 15 13:09:32 2d4 postfix/smtpd[8645]: connect from unknown[XX.XX.XX.XX]
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: E9AF61C58851: client=unknown[XX.XX.XX.XX], sasl_method=PLAIN, sasl_username=XX@XXX.XX
Aug 15 13:09:32 2d4 greylisting filter[8651]: Starting greylisting filter...
Aug 15 13:09:32 2d4 /usr/lib/plesk-9.0/psa-pc-remote[8611]: handlers_stderr: SKIP

[code]....

After deactivating the feature all mail is sent without any problems. We use postfix + dovecot.

View 2 Replies View Related

Plesk 11.x / Linux :: Postfix Rate Limiting

Oct 13, 2014

There are several big domains that frequently defer accepting mail from us causing long delays or rejections. Google, AOL, and Yahoo are examples. I'm considering trying the suggestions found in this online posting regarding rate limiting the sending of messages to those domains. In the below URL, please see the section titled "Different policies for different domains"...URL....

Would these changes be safe to make on a CentOS 6.4 server running Plesk 11.0.9 with Postfix 2.8.4? Would any special modifications for Plesk be necessary?

View 3 Replies View Related

Plesk 11.x / Linux :: Set Global (Smarthost) For Postfix

Jun 17, 2014

At this moment, all mail (no matter what domain) goes out straight to its destination. We want to send the mail trough a antispam firewall before it enters the internet.

What setting to change?

View 1 Replies View Related

Plesk 12.x / Linux :: Reset Postfix Configuration?

Apr 23, 2015

Reset postfix configuration in plesk 12? I have some misconfiguration on smtp banner and hostname so I prefer to reset all.

View 6 Replies View Related

Plesk 12.x / Linux :: Can't Switch From Qmail To Postfix

Jul 21, 2015

I am unable to switch from qmail to postfix via the control panel. It opens a new window that just hangs and never loads. While waiting for it to load, I see these 2 processes running..

root 25108 0.1 0.0 133972 20604 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser
root 25109 0.0 0.0 104952 3032 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser

But after waiting 20 minutes, the browser never loaded and the two proceses remain. So I killed both processes and removed /tmp/psa-installer.lock and started again. The same thing happened.

Is there a way to fix this? If not, is there an easy way to switch MTAs from the command line?

View 4 Replies View Related

Plesk 11.x / Linux :: Postfix Smtp Delay

Jun 17, 2014

I've a problem with a server with Postfix. Emails (smtp) are refused by an operator because there is too many mail sent in a few moment.

With Qmail, we make this config :

1) we create file concurrencyremote
# vi /var/qmail/control/concurrencyremote
with the value 3

2) we restart Qmail and it's ok

With Postfix, we make that :

1) we modify the file /etc/postfix/main.cf
default_destination_concurrency_limit = 3

2) In /etc/postfix/transport :
wanadoo.com slow ;
wanadoo.fr slow ;
orange.fr slow ;
orange.com slow ;
laposte.net slow ;
.wanadoo.com slow ;
.wanadoo.fr slow ;
.orange.fr slow ;
.orange.com slow ;

3) After :
#postmap /etc/postfix/transport

4) In /etc/postfix/master.cf :
slow unix - - n - 5 smtp -o syslog_name=postfix-slow -o smtp_destination_concurrency_limit=3 -o slow_destination_rate_delay=1

5) In /etc/postfix/main.cf :
slow_destination_recipient_limit = 20
slow_destination_concurrency_limit = 3

And we modify :
transport_maps = hash:/var/spool/postfix/plesk/transport, hash:/etc/postfix/transport

6) At the end :
# /etc/init.d/postfix reload

But it doesn't work. Operator "Orange" refused emails.

In maillog, we have :
dsn=4.3.0, status=deferred (mail transport unavailable)

View 3 Replies View Related

Plesk 12.x / Linux :: Postfix - Command Rejected

Jul 25, 2014

I just upgraded my Plesk 11.5 on Plesk version: 12.0.18 Update #9 , and after the upgrade the Postfix stop working. And forwarding, receiving is not working at all and I am getting message bellow.

OS: CentOS 6.5 (Final)
Plesk version: 12.0.18 Update #9

This is the mail system at host nsXXXXX.ovh.net.You can delete your own text from the attached returned message. mail system

<xyz@gmail.com>: Command rejected

Final-Recipient: rfc822; xyz@gmail.com
Action: failed
Status: 5.7.1
Diagnostic-Code: X-Postfix; Command rejected

View 2 Replies View Related

Plesk 12.x / Linux :: After Reinstalling MTA / Postfix Crashed?

Jul 19, 2014

after reinstalling the mta / postfix / smtp (because I couldn't send mails) my plesk is crashed.

I wanted to log in as admin but it doesn't accept my PW. Now with root and then it wants me to accept the license.

Now I copy all my /var/www/vhosts/ maybe when I do the setup steps in plesk it will overwrite all my website content... I hope not all plesk settings are away.

Why I pay every month money for a license? The trouble and work I have with Plesk..

View 4 Replies View Related

Plesk 12.x / Linux :: Postfix - IMAP Folders Under Inbox

May 3, 2015

My server is Plesk 12 with Postfix and Courier IMAP i am also using Thunderbird as mail client...

My question is when i create a folder from my mail client or webmail they just appear as sub folders of my inbox which is not what i want, i want root level folders not to be under inbox... When i searched for this i found [URL] ....

Is this still the case? Is there anything i can do to have root level folders?

View 2 Replies View Related

Plesk 12.x / Linux :: Postfix - Outgoing Emails Getting Spam

Oct 21, 2014

I have a hard problem with my VPS. I have postfix as mail server on plesk 12 under ubuntu 12.

I dont know why the outgoing mails of all my domains in my servers are getting spam in servers like gmail, yahoo, hotmail...

I'm using mxtoolbox to fix errors and warnings and finally fixed all of them, but my mails are still outgoing to spam.

In mxtoolbox actually I have no mail server errors / warning, u can see it with, for example, this one of my domains: [URL] ....

Headers:

This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community.

[Code] ....

View 1 Replies View Related

Plesk 12.x / Linux :: Master Is Stopped Postfix - Don't Start

Jul 12, 2015

Our partition become full and drop the vps, after that we are unable to start postifx, actually postfix start but master not.

So if I run :

/etc/init.d/postfix restart
Shutting down postfix: [FAILED]
Starting postfix: [ OK ]
/etc/init.d/postfix status
master is stopped

I already try to reconfigure all
/usr/local/psa/admin/bin/mailmng-service --start-service --mail-component=all

Into ToolsSettings i change between qmail and come back again to postfix (reinstalling)...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved