When I set up spamassassin to store spam in the spam folder of my mailbox, it doesn't add any X-Sapm headers nor tags the subject. All I found so far was an old thread where a plesk employee stated that it will be fixed in 'a' future version.
I am on 11.5.30 Update #47.
The Plesk panel indicates that the Spam folder can be retrieved using an email client. We are using Outlook 2013 and can not figure out a way to make this happen. We can see the Spam folder using Webmail, but the contents never shows up in Outlook...
View 1 Replies View RelatedI maintain a server with a few domains. The server runs Plesk and Mailman. There are about 50 mailing lists with number of subscribers ranging from a couple people to a few hundred people. All work fine.
There is an additional list with around 2500 subscribers. Messages sent to this list are being received with nearly 500 identical "Received-SPF: pass" lines. Besides seeming odd, it's particularly problematic as some domains are bouncing the emails because the header is too large.
This behavior started after I upgraded from Plesk 11.x to 12.x.
The SPF lines look like this:
Received-SPF: pass (SERVER-HOSTNAME-HERE: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=BOUNCE-LIST-ADDRESS-HERE; helo=SERVER-HOSTNAME-HERE;
Where SERVER-HOSTNAME-HERE is our hostname and BOUNCE-LIST-ADDRESS-HERE is the list's bounce address.
For what it's worth the server hostname and the domain of the list do not match.
This issue seems to be tied to the number of subscribers. We made a new list with a few subscribers and messages looked fine. We added the 2500 subscribers to the new list and then we saw the plentiful Received-SPF: pass entries.
I want to pass the X-SENDFILE header to apache through nginx.
Is this possible or do i have to disable the reverse proxy?
After I post my desired subdomain as mysubdomain.domain.com on /mysubdomain.domain.com/
I get "Error: phpinimng failed: Usage: phpinimng [options] [php_ini_file] phpinimng: error: no such option: --global-config" on main window.
Tried to search how to fix this error, i managed to find that there is also " missing or incorrect /usr/local/sb/include/init.php ". As for this error this doesn't work [URL] .... It's already correct permission 755.
The subdomain appears only in DNS records on my domain. But not in the main plesk panel window.
OS is Debian 7.6 and Plesk 11.5, mysql runs over sock
Maybe I could create manual configuration over ssh in /var/www/vhost/ dir ..?
My wordpress installation in plesk some times give me:
[Sun Apr 12 14:26:08 2015] [warn] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sun Apr 12 14:26:08 2015] [error] Premature end of script headers: index.php
How I can fix? it's very random ....
I just upgraded to 12.x from 11.5, and now the messages to the mailman lists on the server are being rejected for headers being over 32K.
I finally saw this when joining the list myself to see why so many recipient servers are rejecting the mail. I see many instances of these:
Received-Spf: pass (server.mydomain.net: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=thelist-bounces@clientdomain.com; helo=mail.mydomain.net;
and there's one towards the end with:
Domainkey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=clientdomain.com; b=RYN97cdOiqBdkm17GknWv0IMwOmsBHoK+eRaAjYey1vg6+jke2Z35Z1CFBIs/ZvrSslcc1X3kSzu/5SvHzuZVS1nB7zEPDBdr7jZ/Y3ViFccqDWNQbbFjpW9/7tVrFRssMv55gCMNnDwmgqK8WfU1vMkHwfdsuDnIkmB4OtAfqP9w=; h=Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:
[Code] ....
How do I stop getting all those Received-SPF: headers prepended to the mailman list? It tags on a header that's well over 32K for a message that is less than 1K.
I can't find email option in my plesk panel
I have installed mail servers in components, and i see mail settings under server tab but i just cant figure out how to enable mail for specific domain
If i go to webmail.pedjaapps.net i opens default home page, webmail subdomain points to my servers ip address in DNS, roundcube is also enabled in webmails....
Microsoft Windows Server 2008 R2 Service Pack 1
Panel version 11.0.9 Update #59, last updated at Oct 3, 2013 02:06 AM
MailEnable version 5
I see in the plesk documentation that the screen to enable SPAM filtering for an individual there is an option to "Move spam to the Spam folder". I don't see that option so I am wondering if it is only available on some versions of Plesk, or in combination with certain mail servers. How to make that option available?
I'm using on virtual machine the last version of PLESK 11.5.3 update #42 and UBUNTU 12.04.4 LTS provide by a main Italian ISP, the MySQL version is 5.5.35-0ubuntu0.12.04.2.I'm trying to enable the local-infile option in the /etc/mysql/my.cnf file:
[client]
local-infile = 1
[mysqld]
local-infile = 1
When I'm restarting mysql service (with command "service mysql restart") the PHP script works correctly and "SHOW GLOBAL VARIABLES" results "ON", but when server reboot or some hours by the restart the PHP script return to not work correctly and appear the standard messagge: "The used command is not allowed with this MySQL version".Maybe the problem is the start of mysql on boot? I haven't any errors in the mysql or system log!!
I have setup bind in centos 6.5 and then edited /etc/named.conf and added the lines
The extension produced but I am getting the following error when restarting the bind service
Error in named configuration:
/etc/named.conf:2: unknown option '...'
/etc/named.conf:14: unknown option '*'
/etc/named.conf:21: 'options' redefined near 'options'
The following code suggested by plesk slave dns manager extension
Code:
options {
...
allow-new-zones yes;
};
key "rndc-key-mainserver ip" {
[Code] .....
After I removed ... from the options now I get the following error :
/etc/named.conf:51: unknown key 'rndc-key'
I have a repository backup that I want to partially restore. I see the option "Selected Objects" but it cannot be selected. I'm wondering why that is not an option? I'm also wondering what "restore this backup despite the fact that it does not have a valid signature" means. I see a check box. Is Plesk telling me my backup doesn't have a valid signature? What is the meaning of a "signature"?
View 12 Replies View RelatedMy IP address has changed on my personal FTP backup Repository. I can't find the settings option to update it to the new IP address anywhere.
View 3 Replies View RelatedI want to migrate a Plesk 9 tot a Plesk 11.5 server. The new server runs CentOs 6.5, but everyone talks about a checkbox with Rsync option and I also see this at pictures at the internet. But in my Plesk panel this option is missing.
where my Rsync checkbox is?
I have formatted my server and tried to install PLESK 11.5 (I have my license every thing). But after I start to install with current AutoInstaller there is only PLESK 12 to be chosen.
How can I install my PLESK 11.5 BACK with Current AutoInstall? Is there anyway to have an option to install 11.5 in the Installation Selection?
I have an issue with running of the php-scripts. It runs via Cron (as it consumes a lot of memory), after aprox. 10 minutes after the start-time of the script the following error appears in the error-log file (path - /var/www/vhosts/system/subdomain.domain.tld/logs/error_log)
[Tue Feb 17 19:46:57.003326 2015] [fcgid:warn] [pid 28629] (104)Connection reset by peer: [client XX.XXX.XXX.XXX:48450] mod_fcgid: error reading data from FastCGI server
[Tue Feb 17 19:46:57.003368 2015] [core:error] [pid 28629] [client XX.XXX.XXX.XXX:48450] End of script output before headers: Name_of_the_script.php
For a very strange reason another PHP-script, that has the same code, but just runs less arrays, and therefore consumes less memory and can be run via browser - works perfectly from both browser and the cron. The php.ini for this domain set up correctly (see the attachment)...
I have a problem with Parallels Plesk 12 Web Host Edition. In the dashboard, Plesk tells me that Spamassassin service is not running and not installed.
How to setting up it ? Is there a component, a service to buy, or do i have to configure it through SSH ?
We are using Plesk 11.5 with postfix MTA. Spamassassin is working fine for incoming mails and leaves outbound mails unchecked - as it should.
Now there is one of my domains whose mails are relayed to another server (using postfix transport tab; mail support for this domain is disabled in plesk). For the moment, these mails arrive without beeing checked and marked by spamassassin. How could I change this? I have tried to register an additional mail-handler like
Code:
/usr/local/psa/admin/sbin/mail_handlers_control --add --priority=10 --executable=/usr/local/psa/handlers/hooks/spam --name=spam --enabled --queue=before-remote --mailname=relaydomain.de --type=recipient-domain --dont-preserve-on-restore --context=text
but this didn't have any effect so far.
If there is a direct way to enable spam-control for relay domains, Otherwise I could still access spamassassin via postfix' config-files, but how to use two different implementation of spamassassin at the same time.
The SpamAssassin bayes database has become ineffective on one of our servers and we want to wipe it and start fresh - how to do this on Plesk 11.5.30?
View 1 Replies View RelatedWhat steps can we take to improve SpamAssassin performance? I know this was talked about in older Plesk versions, but we may be able to do more now. What configurations can I do to stop more spam?
View 1 Replies View RelatedIt seems that SA is not using bayes on the incoming messages. How to get bayes to work?
I have trained with plenty of ham and spam. Where are the db files for global bayes located?
I am running Plesk 11.5.30 Update #44, Postfix 2.8.14 and Spamassassin 3.3.1 on a Red Hat Enterprise Linux Server 6.5 server. I am looking to update the rules within Spamassassin. I have had a bit of a look and see that a crontab has been created but its a bash script with a comment saying it has been disabled by psa-spamassassin package (/etc/cron.d/sa-update).
Code:
#!/bin/sh
# This task was disabled by psa-spamassassin package
exit 0
Is there a reason why it has been disabled by Plesk? If I update the rules, will it break something?
I have recently added into Postfix RBLs to reduce the amount of SPAM my customers is getting and this is my next step in a list of things that I would like to change.
I noticed that my spamassassin wasn't running on my server. so I restarted the service from the plesk panel but got the following message:
Error: Unable to make action: Unable to manage service by spammng: spamassassin: unrecognized service
ERROR:spammng:Unable to start SpamAssassin service
('--start', 'spamassassin')
So I SSH'ed into my machine and saw that spamassassin wasn't running.
The I reinstalled spamassassin from the "add and remove product components", but that didn't change anything. Still the same error.
Installing Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
Is it possible to add a ssl to a IP number despite of domain name?
I would like to know if i can buy a ssl and set a IP on website address...
I seem to be having a strange problem with Plesk 12, after adding about 23 domains, i cant seem to add any more domains.
While adding the domain, it just keeps syncing, and then when i click on the subscriptions i see the domain has been added, but i cannot customise it.
Error: IP addresses for mail service of domain xxxxxx.com are not set
View 3 Replies View Related