When i try to call websrvmng.exe --reconfigure-vhost --vhost-name=domain.com (like here: [URL] .....),
I get this message: "Missing required parameter --vhost-config."
Version: Plesk 11.5.30 Update#5
I getting this error after I run the command: ~# /usr/local/psa/admin/bin/httpdmng --reconfigure-all
Code:
PHP Deprecated: Comments starting with '#' are deprecated in /opt/psa/admin/conf/php.ini on line 25 in Unknown on line 0
Error occured while sending feedback. HTTP code returned: 502
Error occured while sending feedback. HTTP code returned: 502
Execution failed.
Command: httpdmng
Arguments: Array
[Code] ....
3 sites on this server hosted with different subscriptions and conditions. So the host work yet but I getting a red banner on the Subscription menu.
About my system:
os: debian 7.8 64bit
plesk: 12.0.18 Update #47
Code:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
I recently upgraded from Plesk 11.5 to 12.0. I also just got an extra IPv4-address for my server (provider is Strato), unfortunately I have some problems with adding it to Plesk.
The IP should be assigned automatically through DHCP, but when I did a Reread IP in Plesk, nothing happened. I tried to manually add the IP, but then Plesk manually configured it and I lost the IPv4-connectivity (IPv6 kept working though).
Now when I want to remove the IP, I get the following error:
Is this a bug or a problem with my specific configuration?
It looks like a change was made to the firewall settings (I think this was done by .net microsoft patch).I have manually added mysql-nt to the firewall ruleset, and this has allowed MySql to talk to the application. (Wordpress websites are now working)I still get the same error when i try to log in to the control panel.
ERROR: PleskMainDBException
MySQL server has gone away
0: common_func.php3:637
reconnect()
1: common_func.php3:600
db_connect()
2: auth.php3:134
Is there a list of firewall rules that need to be in place to allow Plesk to work?
I have somewhere at 2000 domains.
I need to change path to vhost from W:host to D:vhost
I copied all files from W to D drive and created symbollinks. Now all files stored in D:vhost and symbollincs pointing to W:vhost.
If I will use reconfigurator, will it recopy existing files or just will skip them? Because I have millions files in my vhost dir
Also i thought about change drive letter in windows OS. It wil be enough to just stop IIS service and plesk services for switching disk letter?
Can i just some how say plesk that he should search all vhost files in D:vhost? With out process of copying files,becouse thay already exist there are.
I have accidentally deleted httpdocs folder. But after that I create It manually and upload my website. Now It is showing 'Authentication Required' whenever I want to open my site through browser.
View 1 Replies View RelatedLatest Update 12.0.18 Update 12 appears to have removed PHP 5.4 and PHP 5.5 from my dropdown under hosting settings.
The only PHP that is left is PHP 5.3
Yet, the updates and upgrades page still lists PHP 5.4 and PHP 5.5 as installed.
Also PHP is still working on the virtual websites that were previously enabled with either 5.4 or 5.5, but not able to change using the Plesk Panel.
Given that Parallels has broken the Panel in that latest automatic update I'd hope it can be resolved ASAP.
I can't even find any references in the KB about Plesk 12 on Windows regarding PHP versions
I can even give feedback about the broken patch as every feedback channel requires paid support.
I created a User Account with the Administrator Role for one of my colleagues & the User Role Properties indicate that access to all of the Plesk services has been granted.
However, when my colleague logs in, he's unable to see the Server tab (see attached screen shot).
Where do I configure the permissions so that he can see the Server tab?
I've encountered a curious problem. Fresh install of Plesk 11 on a Windows 2008 R2 Server. If I want to configure FTP-Accounts under "Domain&Mail" the option is missing entirely. The Server is running an FTP Server and I can connect via FTP to some parts with some users I have created in Plesk. I've scrounged the internet for information about what might be going on here but came up empty.
There is no option to configure FTP Accounts or anything FTP in Plesk. There is empty space where the link should be.
I've transferred at Joomla! site to my server with Plesk 11.09. I want to see if its all working allright before i change DNS to point to the new server.
I put in [URL] .... as preview link, but that only shows the Plesk default UI. When i add 'index.php' to the end I do get the site, but without formatting
[URL] ....
How I can get my formatting to work?
After upgrading my vps (running CentOS 5.10) to Plesk Panel 12 all the websites hosted we're showing the Plesk default page. So I ran the httpdmng to reconfigure all the sites and I got this error back:
~]# /usr/local/psa/admin/bin/httpdmng --reconfigure-all
Execution failed.
Command: httpdmng
Arguments: Array
(
[0] => --reconfigure-domains
[1] => domain1.tld,domain2.tld,domain3.tld
)
Details: Empty error message from utility.
I already restarted all the services, rebooted the server and followed this kb article: [URL]
Unfortunately no success.
After upgrading from 9.5 to 11.5.30 update #47 (CentOS 5.8 (Final) 32bit) i'm getting error when trying to add an email box:
Internal error: SQLSTATE[HY093]: Invalid parameter number: no parameters were bound MessageSQLSTATE[HY093]: Invalid parameter number: no parameters were bound
File Pdo.php
Line234
TypeZend_Db_Statement_Exception
mysql request "select objectId from Configurations where status='error';" gives nothing.
We're trying to migrate a Webspace from a 11.5 to a 12.0.18 Plesk host using the Migration Manager. The Webspace contains 4 domains. The main domain of the webspace gets migrated fine, however, all of the "child" domains fail with the following error:
Execution of /usr/local/psa/admin/plib/api-cli/domain.php --create webspace-domain.ch -webspace-name child-domain.ch -do-not-apply-skeleton -notify false -guid 733c0e02-4b75-4f73-8421-03b23051d65d -creation-date 2013-06-06 -skip-plan -ignore-nonexistent-options failed with return code 1.
Stderr is
Wrong syntax for command's '-webspace-name' parameter. 'webspace-domain.ch' does not match the pattern '/^[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1}(.[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1})+$/iu'.
Ive been searching around recently for a webhost to setup my online development area. The following are my requirements, so if you could point me in the right direction i would be extremly grateful!
Windows Hosting (durr! at least 2 gig space/50 gig bw).
ASP.NET 2.0 & AJAX 1.0 (3.5 would be even better, but i can wait until it comes out of BETA).
SQL 2000/2005 (I will need upto 10 databases, but none of these stupid 100mb database limits. I would prefer if space as taken out of my web space.
ISAPI_REWRITE module (i like to make pretty urls!).
I would prefer UK based servers, but i'll make do with US.
We have strange problem with our plesk 11.0.9 Update #62.
Have only 10 domains hosted and all except 1 is working fine.... This particular domain doesn't run PHP scripts at all and when we try to browse a php script from browser, the file starts downloading. I have tried to compare the php settings from other working vhosts but and found no change at all... tried with
/usr/local/psa/admin/bin/httpdmng --reconfigure-domain domainname-tld
/usr/local/psa/admin/bin/httpdmng --reconfigure-al
Also tried to create the vhost but no gain...
Also I tried to change the PHP setting from control panel so that the php file would be generated , but every time I reset the value, it reverts back and no value is preserved.
I have to move a lot of customers from old home-grown server setup to a plesk panel powered server.I want to use the CLI to do this and wondered if there was a tutorial showing how to setup the customer and add the subscription/hosting plan for that customer?
I looked over the docs and tested them, but the service plan never shows that hosting is added.
# ./customer --create JDoe -name "John Doe" -passwd sample -country US -notify false
# ./subscription --create example.com -owner admin -service-plan "Default Domain" -ip 192.168.1.100 -login JDoe -passwd "user pass"
I get the email saying that the do moan was setup, but the domain does not show that hosting is affiliated with it.
edited /usr/local/psa/admin/conf/templates/custom/domain/nginxDomainVirtualHost.php and add this include hhvm.conf; and work but it's possible to edit this setting only for one vhosts? I must enable only for one vhost because i have some php script not work with hhvm
View 3 Replies View RelatedI have domainA and domainB. domainA hosting files, for security ALL browser access should denied.. EXCEPT domainB make in php call with readfile() to a file on domainA. This should allowed.
domainB => readfile(http://domainA/myfile) => allowed ... all other access should denied.
So I set in vhost of domainA this:
<DirectoryMatch "^/var/www/vhosts/domainA/httpdocs/folder/">
Order deny,allow
Deny from all
Allow from 127
Allow from server-ipv4
Allow from server-ipv6/128
Allow from ::1/128
</DirectoryMatch>Click to expand...
When a customer use the wordpress auto installation tool, all work ok.
But, when the customer try to install wordpress manually (Uploading by FTP), it returns different permissions errors.
Example: "wp-config.php" cant write .
I compared the permissions of both vhosts (WP-Auto-install and WP-Manually-Install), and have totally different permissions.
WP-Auto-installed : /httpdocs = 770
WP-Manually : /httpdocs = 750
How I can set permissions to 770 by default when create a vhost? to avoid the customer having to do it manually.
My /var/www/vhosts/system directory was accidentally deleted. The actual vhost directories are unharmed, e.g. /var/www/vhosts/example.com. Is there a non-destructive script I can run to re-initialize the system directory? I am on Plesk 11.5.30.
View 2 Replies View RelatedI'm calling bits of code using the following under Windows Server 2008
Code:
<!--#include virtual="/mycode.html"-->
It's working in every instance EXCEPT for one file.
The contents of mycode.html is part of a Javscript...
Code:
<script language="JavaScript1.1"><!--
// my various functions below...
function myfunction1(){
etc.;
etc.;
}
The problem is that when the page outputs, the only thing that comes out of this particular SSI call is just this...
Code:
<script language="JavaScript1.1">
Everything else after it is totally blank.
I've implemented a workaround but would like to know if this problem is due to something not set up properly in Windows Server, by design, or something else.
This previously worked fine in various Apache environments though.
I have a new DS with Plesk 12. I needed to change the default /var/www/vhosts location to a different physical drive, with more capacity.The larger disk is mounted as /disk1, so I created a folder here called vhosts, moved everything from the existing /var/www/vhosts directory, then I mounted /disk1/vhosts as /var/www/vhosts. See my fstab output below.
I then edited /etc/psa/psa.conf to update the VHOSTS location as per [URL] ...., and restarted Apache, MySQL and reconfigured domains.I thought all was OK, and that Plesk would just see /var/www/vhosts as normal, but I proceeded to migrate domains from another server to this box, and found that whilst some sites were working OK, many were not.
I was finding that existing config directives that used <Directory> were being ignored or seemed to disappear.All sites with .htaccess files stopped workingWe would get Apache / PHP errors saying that files could not be accessed as they were not in the allowed path for the domain. Plesk seems to be logging, reporting, and handling files as if they were in /disk1/vhosts, not the usual location. I have got sites working by adding /var/www/vhosts/ domain and /disk1/vhosts/domain to the PHP Settings page as allowed paths.
I have checked in the httpd.conf for each domain, and they all list the site document root as /disk1/vhosts/domain, not /var/www/vhosts/domain.It's as if Plesk is ignoring the change in /etc/psa/psa.conf.
All I want is for Plesk to think that /var/www/vhosts is the document root for all domains, and not do anything with /disk1/vhosts. I have many sites with hard coded links to included files in /var/www/vhosts/domain, and I dont want to have to rewrite them all to use /disk1/vhosts.
I have had to stick HTTP configuration directives on nearly every site, and add these entries to the allowed paths box, which obviously I should not have to do. Can any Plesk / Linux gurus tell me what I need to do to fix my problem, get sites working in /var/www/vhosts, and have Plesk allow .htaccess files to work without me having to add "AllowOverride All" to every domains??
# /etc/fstab
# Created by anaconda on Tue Oct 14 05:22:57 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
[code]....
You can edit the nginx directives for the desired vhost at the webserver config. However, it seems like that you can only add basic directives, but not something like that:
Code:
http {
# memcached servers
upstream memcached-servers {
server 127.0.0.1:11211;
}
[Code] ....
How can I do that?
Want to activate webDAV in a specific domain with a v_host conf file, but do not have a /conf directory in the domain path. How can I manage the this?
View 2 Replies View RelatedMy server: win server 2003 sp2 using HostingController 7 with php 5 and mysql5
P4 3.06, 2gb ram
Please help me how to reconfigure php with xml support
how to optimize my server (run php5 and mysql5)
I uninstall webmail horde and fail2bn.. When I tried to reinstall have this error:
The Yum utility failed to install the required packages.
My Centos server running Plesk12 is running scheduled backups every sunday 3AM.
The backup is configured so that it's created as a multivolume backup with a volume size of 2047MB.
The backup is placed on my Personal FTP repo (another plesk12 server mounted with big storage).
The backup content is configured to backup server config and content (all).
The problem I have is when the backup is running I can see that it creates the volumes and stores it locally. After it send all the volumes the the external FTP repo it will delete the local (tmp) data. See my attached screenshot for storage health during backup.
Is this behaviour normal? This way we can never run a backup to an external FTP repo when our server passed 50% storage. Is it not normal to:
- Create a volume
- Send it to FTP repo
- Delete volume locally
- Repeat until done
I am trying to upgrade my Plesk 11.5.30 install to 12.x but I keep getting an error:
Exception: Failed to solve dependencies:
php-devel-5.4.29-35.el6.art.x86_64 requires php-cli(x86-64) = 5.4.29-35.el6.art
Error: The Yum utility failed to install the required packages.
Attention! Your software might be inoperable.
Please, contact product technical support.
I have run the boostrapper repair but the error remains.
i have a vps with 384mb ram,20Gb space and two sites hosted but everthing is down. on Qos alerts i have many yellow and black zone.
For the traffic statistics i see just a little gb a day and 1300-1500 visitors daily.
The support staff answer my ticket that the server work with a high tcp connections to my vps and this cause the down stats of all my website.
more details:
Code:
uid resource held maxheld barrier limit failcnt
7041: kmemsize 6851969 6887410 20761600 23068672 0
lockedpages 0 0 256 256 0
privvmpages 118485 119083 235929 262144 0
shmpages 6654 6654 65536 65536 0
dummy 0 0 0 0 0
numproc 86 87 200 200 682
physpages 41110 41692 0 2147483647 0
vmguarpages 0 0 98304 2147483647 0
oomguarpages 41110 41692 98304 2147483647 0
numtcpsock 30 32 500 500 0
numflock 8 8 11340 12600 0
numpty 2 2 64 64 0
numsiginfo 0 1 256 256 0
tcpsndbuf 393036 399744 3154974 5258291 1009
tcprcvbuf 380616 405756 3154974 5258291 28300
othersockbuf 21916 158504 3271557 8388608 0
dgramrcvbuf 0 700 1572864 1572864 0
numothersock 21 26 500 500 0
dcachesize 668198 677622 8304721 9227468 0
numfile 2650 2677 8192 8192 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 14 14 500 500 0[
How can i increase the numproc,tcprcvbuf and all parameters that give fails.
After my HDD crashed, I replaced it and installed Plesk 12.0.18 but not some options are missing from the panel.I'm missing this functionality: Send from domain IP addresses and use domain names in SMTP greeting
Also now after the restoration of the backups in /var/www/vhosts/<DOMAIIN_NAME>/logs/There are no logs, but they are present in /var/www/ vhosts/ system/<DOMAIIN_NAME>/logs/Before they were symlinked to the first directory.all my domains with a dedicated IP are being sent from my main IP, and they are being marked as spam because of SPF.