I'm migrating some websites from old server with virtualmin, some websites have files with special characters as à ,ö,ç etc.. On the other server the files (images for example) are served well but on the new server with plesk 11.5 error 404 appears. (Nginx reverse proxy is activated)
View 1 RepliesI'm migrating some websites from old server with virtualmin, some websites have files with special characters as à ,ö,ç etc...
On the other server the files (images for example) are served well but on the new server with plesk 11.5 error 404 appears. (Nginx reverse proxy is activated)...
My Linux (CentOS) server with Plesk 12 is giving HTTP 414 errors ("URL too long") in response to URLs which are over 256 characters in length. They happen to include a GET variable in the query string which accounts for most of this length, and if I shorten it manually, it works. But I can't change the script to submit a shorter URL or send it by POST, because it comes from an external payment processing server which I don't control.
Adding the following lines to my /etc/httpd/conf/httpd.conf file and restarting Apache does not work:
LimitRequestLine 8190
LimitRequestFieldSize 8190
The URLs I'm trying to use are well short of 8190 bytes; they are around 800 characters long.
Is this something that Plesk affects / can control? Is there a way to see what the current maximum setting for URL length is, and to change it?
We have many intranet document what linked on our intranet site. We use "apache builed in" directory listing to handle documents on browser, and make accessable to users. Because this not so user friendly we try to use a template (h5ai-[URL] ....) for mod_autoindex.
Unfortunatelly if file or folder name contains special characters (like é,á,ű,ő,ú,ü,ö,ó) than get Access Forbidden - Error 403. If change the folder name, than its ok.
I use xampp. how to solve this.
I'm trying to migrate a server that has the version 10 to another server with version 11.
When I run the migration manager, I get the message "IP Address not found '.
Both teams have the same type of IP, exclusive.
I have faced with problem, when logged to plesk web panel:Internal error: The site with UUID "xxxxxxxxxx" was not found.
View 2 Replies View RelatedIn the webhosting offers section (vps hosting), both Knownhost and PowerVPS are running deals.
http://www.webhostingtalk.com/forumdisplay.php?f=104
The PowerVPS deal seem MUCH better in terms of cost, and memory, and bandwidth.
I've read through several posts here on the board about each company. From what I've read, Knownhost is GREAT! The stuff I've been reading about PowerVPS says that things have not been that great in the recent past for them.
I'm writing now only to get opinions and comments about the deals they're offering right now and which you think would be a better choice.
Trying to access any APS installed in Plesk i obtain this error: Internal error: Package with UID 'fb00f4ad-620a-4052-96b7-398bd99d9d6d' not found.The error panel.log:
[19-Dec-2014 13:17:19 Europe/Berlin] Exception: Package with UID 'fb00f4ad-620a-4052-96b7-398bd99d9d6d' not found.
file: /usr/share/aps_php/aps_php.php
line: 12519
[code]....
This post change the error, but i think that is not the correct way: [URL] ..... Any way to reinstall/regenerate APS database and anything related with it?
I have reboot the system and I have follow messing when i will open the plesk panel:
ERROR: Class 'vz' not found (Manager.php:142)
What can I do?
When I make /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
Then I become follow messing from log /var/log/plesk/install/plesk_12.0.18_repair.log, see the attachment.
After upgrading Plesk today the panel is reachable however the content area displays the message "File not found." for all pages.
View 6 Replies View RelatedI am getting Package with UID '9f03febe-57f4-4233-ace8-23f5ce964198' not found error.
I have applied this => [URL] ...
But problem is not solved this time I am getting same error but different UID number.
We are facing a strange issue in a Plesk Windows server. One of the domain's subscription and the domain itself is not found in Plesk server. We also queried the related tables in Plesk db, but there is no entry of the domain or the user. But the domain is present in IIS. So is the user and the directories along with the correct permissions. How can we resolve the issue and get the domain added in Plesk so that the customer can manage it from Plesk panel?
View 2 Replies View RelatedWe are in the middle of a huge migration from Expand to PPA using the migrations tool provided by Parallels. But since a few days, we constantly receive the message
Code: No handlers could be found for logger "parallels"
Not sure what the problem is but I can't preview a new website using Quick Site Preview. I have configured Tools and Settings > Website Preview Settings > Quick Preview on a domain name in Plesk by selecting the server domain name, yet despite this when I go to a new domain I setup today and click preview I get a browser windows that says "Server Not Found".
View 2 Replies View RelatedAs I read, when Plesk and WHMCS are in the same server, you may have 502 bad gateway errors when creating an account through WHMCS..Page not Found/Timeout/502 Bad Gateway error creating accounts with Plesk 10+..By default Plesk 10 and above performs a forced restart of apache when an account is created or suspended which causes WHMCS to lose connection to the server, and if your WHMCS is on the same server, you will also lose connection to WHMCS at the same time.
In order to resolve this please refer to the following knowledgebase article for instructions on configuring Plesk to perform a graceful restart instead: URL..
But when I activate nginx in Plesk the 502 bad Gateway problem comes back.Is there an option to activate Nginx graceful restart in Plesk?
I use plesk 11.5 on windows 2008r2 x64
Have error then login https://ipxxxx:8443
ERROR: Class 'CommonPanel_Update_Autoinstaller' not found (UpdateController.php:69)
Running Plesk 12.0.18 on Windows 2012
I create a new domain then use Plesk Applications tab to install Wordpress. It shows the message:
Code:
Error: Unable to install the app because its installation requirements are not met. Contact your hosting provider to resolve this problem.
Requirements
PHP extension
The 'mysql' extension was not found.
However, php is installed and phpinfo shows that the mysql extension is installed. I try different versions of php, cgi/fastcgi but ll fail with the same error. I install Wordpress via FTP and it works fine.
There are knowledge-base articles relating to this error but they are for Linux and the solutions don't work in this case:
[URL] ...
[URL] ...
Maybe the Wordpress database has to be created before using Plesk to install Wordpress? If so, what should the database name be? How does Plesk know what the name of the database is that it should use? Why doesn't Plesk just create a database to use?
I have install Plesk 11.5.3 on my Windows Server 2008 r2. I want to try Mailenable on the PleskServer, so i installed the feature, but know when I am calling the webmailer with http:webmail.domainname.de works fine, but when I try https://webmail.domainname.de i become a Not found: HTTP Error 404. The requested resource is not found
Whats wrong? On my linux Server its work fine...
I'm having a problem that I've never run across before, and was wondering if anyone might have any ideas as to what may be causing this.
Basically, on 3 of 5 new servers on a brand new private rack from The Planet, we're having what we've narrowed down to be a problem with PHP or Apache. Loading any sort of PHP page with a larger output (even such as a simple 'phpinfo' call) results in, depending on the computer or browser in use:
- The page loading for a split second then reverting to a DNS Server Not Found page (observed in IE)
- The page loading, but filling the source code with vast amounts of extra blank spaces, making a simple phpinfo call download 5+mb of HTML (observed in both IE and Firefox)
- The page loading part way, then hanging (observed in Firefox)
- Occasionally the page will reload over and over again all by itself until it ultimately goes to a DNS error page (observed in IE)
Pages not including PHP, including very long .HTML and .SHTML pages, load just fine.
Here's a link to a page calling a simple phpinfo string, and nothing else (as this is my first post, I can't link directly to URLs, sorry):
im still getting the following error
Code:
root@main [/tmp/apf-9.7-1]# ./install.sh
Installing APF 9.7-1: eth0: error fetching interface information: Device not found
Completed.
Installation Details:
Install path: /etc/apf/
Config path: /etc/apf/conf.apf
Executable path: /usr/local/sbin/apf
Other Details:
eth0: error fetching interface information: Device not found
cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory
Imported options from 9.7-1 to 9.7-1.
Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig
my host has said
Code:
edit the apf.conf file to venet0:0 instead of eth0
which ive done and im still getting the error, Ive pasted my current conf.apf config below
Code:
#!/bin/sh
#
# APF 9.7 [apf@r-fx.org]
# Copyright (C) 1999-2007, R-fx Networks <proj@r-fx.org>
# Copyright (C) 2007, Ryan MacDonald <ryan@r-fx.org>
# This program may be freely redistributed under the terms of the GNU GPL
#
# NOTE: This file should be edited with word/line wrapping off,
# if your using pico/nano please start it with the -w switch
# (e.g: pico -w filename)
# NOTE: All options in this file are integer values unless otherwise
# indicated. This means value of 0 = disabled and 1 = enabled.
##
# [Main]
##
# !!! Do not leave set to (1) !!!
# When set to enabled; 5 minute cronjob is set to stop the firewall. Set
# this off (0) when firewall is determined to be operating as desired.
DEVEL_MODE="1"
# The installation path of APF; this can be changed but it is not recommended.
INSTALL_PATH="/etc/apf"
# Untrusted Network interface(s); all traffic on defined interface will be
# subject to all firewall rules. This should be your internet exposed
# interfaces. Only one interface is accepted for each value.
IFACE_IN="venet0"
IFACE_OUT="venet0"
# Trusted Network interface(s); all traffic on defined interface(s) will by-pass
# ALL firewall rules, format is white space or comma separated list.
IFACE_TRUSTED=""
# This option will allow for all status events to be displayed in real time on
# the console as you use the firewall. Typically, APF used to operate silent
# with all logging piped to $LOG_APF. The use of this option will not disable
# the standard log file displayed by apf --status but rather compliment it.
SET_VERBOSE="1"
# The fast load feature makes use of the iptables-save/restore facilities to do
# a snapshot save of the current firewall rules on an APF stop then when APF is
# instructed to start again it will restore the snapshot. This feature allows
# APF to load hundreds of rules back into the firewall without the need to
# regenerate every firewall entry.
# Note: a) if system uptime is below 5 minutes, the snapshot is expired
# b) if snapshot age exceeds 12 hours, the snapshot is expired
# c) if conf or a .rule has changed since last load, snapshot is expired
# d) if it is your first run of APF since install, snapshot is generated
# - an expired snapshot means APF will do a full start rule-by-rule
SET_FASTLOAD="0"
I have a problem with my server. I am trying to make a subdomain, and it isn't working. I create it like how in all tutorials says here( click here ) . I completed all fields, but when i try to open the subdomain in a browser page, it's telling me, page not found / page doesn't exist. I have a dedicated server on window server 2008 for my website with a dedicated IP.
View 5 Replies View RelatedI'm trying to use nginx php-fpm on my forum, and to set friendly url's, I am told to add this to nginx config:
Code:
location / {
try_files $uri $uri/ /index.php?$uri&$args;
index index.php index.html;
[Code] ....
I try adding this using the Additional Nginx Directives, and get this error:
Code:
Invalid nginx configuration: nginx: [emerg] duplicate location "/" in /var/www/vhosts/system/domain.com/conf/vhost_nginx.conf:1 nginx: configuration file /etc/nginx/nginx.conf test failed
I think if my domain was in a folder, this wouldn't be a problem. I really don't want to change that, though.
Im facing problem from last 48 hours when i try to access my site
www.yourdomain.com/forum
then it showing me error Page not found
Not Found
The requested URL /forum was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
and when i checked this forum folder through shell and cpanel then its there and when i try to access it through
[url]
then its working fine does any of you know whats the problem was plz help me my site was already closed from 48 hours God Bless you
I have a problem trying to mount a network share.
Here is the full story: I have setup a WDS server running DHCP, DNS, WINS and WDS services on it.
After I succesfully boot the network image I try to mount a network share located on this server running "net use * IPofServer"
At this monent I reiceve System Error 67 has occured. The network name cannot be found.
I've tried "net use * NameOfServer" but still no luck. (net use z: or net use * don't matter in this case).
I though that since it could not resolve the name, I've installed a WINS server on the server but this client that I boot still cannot do the job.
Also not to forget the server is an Win 2k3 SP2 Active Directory one.
If I traceroute the server IP from the client it resolves the server name.
nslookup doesn't work since the network booted image is WinPE 2.0 which is Vista.
I've looked closely on internet for a way to solve this but all the solutions that I've found failed to work though.
Over the last two weeks several individuals in different parts of the USA have noted extra characters in some web pages when on the att network.
The same server is sending out the same sites fine, when viewed on all other internet providers we have tested. We have also tested multiple browsers. Interestingly, if you use the secure layer - https, the site is fine, no extra characters.
Can any settings or anything on the server hosting software, etc, precipitate or stop this?
Read more at [URL]...
I receive the error just on one domain, when i saw this error i check server and server has a RAM, CPU ok.
Site use ASP + ISAPREWRITE is this causing this problem?
How can i fix this?
I am trying out Plesk 11 for windows, so far I like it and will most likely buy it. I am having a problem with a new domain, however. I just created the domain, and I installed wordpress on it using Plesk's application page. If I go to [URL] .... it will not load, however if I go to [URL] .... it loads just fine. I even edited the directory to make sure that IIS looks for index.php first, but this didn't fix it. What am I missing?
View 3 Replies View RelatedI have a fresh install of 11.5 on Windows Server 2008r2. I have setup a domain from a 9.5 backup. Everything _looks_ okay, php settings look fine, but php pages give the following with detailed error reporting:
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Note that this happens whether I select php 5.2 or 5.4
I am running plesk 11 on windows 2008 vmware esxi 5 vps,
When I try access mssql.domain i have the following error:
Line 1: <object id="ConnectionString" class="ASPEnterpriseManager.ConnectionString" runat="Server" scope="Session" />
PHP pages on my server are not responding. Following message appears in Logs:
Unknown(): Unable to load dynamic library 'c:program filesswsoftpleskadditionalphpextensionsphp_curl.dll' The specific module could not be found.
Plesk 7.5.6 Control Panel
PHP 4.3 is installed on server.
It was working perfect till last night. How can I fix this, any advice?
The php_curl.dll is available in above location and have correct permissions.