Error APF :: Error Fetching Interface Information: Device Not Found

im still getting the following error

Code:
root@main [/tmp/apf-9.7-1]# ./install.sh
Installing APF 9.7-1: eth0: error fetching interface information: Device not found
Completed.

Installation Details:
Install path: /etc/apf/
Config path: /etc/apf/conf.apf
Executable path: /usr/local/sbin/apf

Other Details:
eth0: error fetching interface information: Device not found
cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory
Imported options from 9.7-1 to 9.7-1.
Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig
my host has said
Code:
edit the apf.conf file to venet0:0 instead of eth0
which ive done and im still getting the error, Ive pasted my current conf.apf config below

Code:
#!/bin/sh
#
# APF 9.7 [apf@r-fx.org]
# Copyright (C) 1999-2007, R-fx Networks <proj@r-fx.org>
# Copyright (C) 2007, Ryan MacDonald <ryan@r-fx.org>
# This program may be freely redistributed under the terms of the GNU GPL
#
# NOTE: This file should be edited with word/line wrapping off,
# if your using pico/nano please start it with the -w switch
# (e.g: pico -w filename)
# NOTE: All options in this file are integer values unless otherwise
# indicated. This means value of 0 = disabled and 1 = enabled.

##
# [Main]
##
# !!! Do not leave set to (1) !!!
# When set to enabled; 5 minute cronjob is set to stop the firewall. Set
# this off (0) when firewall is determined to be operating as desired.
DEVEL_MODE="1"

# The installation path of APF; this can be changed but it is not recommended.
INSTALL_PATH="/etc/apf"

# Untrusted Network interface(s); all traffic on defined interface will be
# subject to all firewall rules. This should be your internet exposed
# interfaces. Only one interface is accepted for each value.
IFACE_IN="venet0"
IFACE_OUT="venet0"

# Trusted Network interface(s); all traffic on defined interface(s) will by-pass
# ALL firewall rules, format is white space or comma separated list.
IFACE_TRUSTED=""

# This option will allow for all status events to be displayed in real time on
# the console as you use the firewall. Typically, APF used to operate silent
# with all logging piped to $LOG_APF. The use of this option will not disable
# the standard log file displayed by apf --status but rather compliment it.
SET_VERBOSE="1"

# The fast load feature makes use of the iptables-save/restore facilities to do
# a snapshot save of the current firewall rules on an APF stop then when APF is
# instructed to start again it will restore the snapshot. This feature allows
# APF to load hundreds of rules back into the firewall without the need to
# regenerate every firewall entry.
# Note: a) if system uptime is below 5 minutes, the snapshot is expired
# b) if snapshot age exceeds 12 hours, the snapshot is expired
# c) if conf or a .rule has changed since last load, snapshot is expired
# d) if it is your first run of APF since install, snapshot is generated
# - an expired snapshot means APF will do a full start rule-by-rule
SET_FASTLOAD="0"