I designed my companies website but we've had a change in IT and php went down. The new guy (who is here to fix things) just sent me this and quite frankly I'm at a loss (i use a VPS, thus never having to deal with this stuff). But seeing how it's my own company I figured I'd try to help.
Here is the question:
Quote:
You are running IIS (windows server). The PHP should be something straight forward, but as we see it is not...
Previously, you had PHP ver PHP 5.2.6 dated may 2008. - it wasn't working correctly.
I updated it with the latest version php-5.2.9-1 dated march 2009. - and now the PHP is not functioning.
My questions, if you know was to figure which option of PHP cgi are you using.
IIS ISAPI module
IIS FastCGI
IIS CGI
Then, when installing the PHP, there are many extensions that are optional to install. Do you know or can you tell me, which extensions are needed by your app?
Honestly, the website just uses a few php includes to template it (and make my life easier). And that's what were trying to get working.
The company I work for unfortunately runs their site on a IIS server. I want to install some forum software, vBulletin or phpBB onto the server and run it on the same site. PHP of course needs to be installed to do this.
Boss is worried that putting PHP on same server as ASP might take down the site if something goes wrong. What are the odds of this happening if I follow directions and what steps should I take to install?
Where can i find a step-by-step guide on how to install ffmpeg-php on windows? I got totally lost while doing that. Below are the steps i'v taken so far:
- Dled Windows EXT from here: http://sourceforge.net/project/showf...roup_id=122353 (ffmpeg_new.rar) - Unzipped it. -Copied all php_ffmpeg_... dlls into php's ext dir -Copied avformat.dll and avcodec.dll to system32 folder -Activated ext (i am using WAMP5) -Restarted Apache -Ran phpinfo(); and didnt see the ext activated.
my current situation is that i'm currently renting out a server in a datacenter, and there is no realistic way I can get physical access. Call me cheap, but I really don't fancy shelling out $100 to get my techs to install it. I do have an idea though, and I just wanted to know how realistic it is / how I would go about performing it.
My server has a rescue shell (uses busybox) that I am able to re-install the OS from (all linux OSes), re-partition the HDD and do general troubleshooting things from. If I was to create a VMware machine on my local computer, install windows 2003 and use a hdd image cloner (from within the machine) to create an image of the HDD, how would I go about copying this image to the server's HDD? I don't know of any cross platform "HDD backer upper / recoverer thingies"
i have a dedicated box with centos.. i wold like to install VmWare workstation and a virtual windows image in vmware program, and then i wold like to make remote desktop on windows image from vmware..
I have a Windows Mobile 6 (Blackjack II) phone that I am connecting to my cpanel VPS via Pop3.
I have a number of pop3 accounts setup to check for email every 30 minutes. However, every couple days the phone stops downloading mail and if I do a manual send and receive I get a "The Server Certificate is not valid. Continue Anyway?" with a yes/no. If I click yes, the email downloads and then the automated emails will work for several days and then the process is repeated.
Does anyone know how to either disable this check on the phone (no luck finding that yet), or to install the certificate from the cpanel mail server to the phone?
Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
I am trying to install Spam assassin on Plesk 12.0.18 on windows server 2012 r2 . I am getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist
I have tried re-installing and installing spam assassin from command and as per the solution given in below KB: URL....But I an still not able to install in on the server. I have checked all directory paths are correctly located.
I decided to go with Cent OS after reading about it in the forums here, but I've had nothing but problems trying to install it. I first tried to do a net install but the installation took nearly an entire day because it would keep popping up messages about corrupt files when downloading the package files. Eventually it just gave up or rebooted because I came in in the morning to find it at a message saying "No OS installed". I then burned all 7 installation disks and tried that way, still got a few of the corrupt file messages (but far fewer than the previous time) and made it through the installation only to still have it say "no os installed" again after the reboot. I thought maybe it had something to do with the fact that I was not installing a boot loader (there is no other OS installed anyways) but when I tried to reinstall a third time, this time with the boot loader, it now says that the CD drive (USB) is already mounted on tty2 and I can't even start the installation? WTH!
The server is a Dell PowerEdge R300 with two Intel Core 2 Duo 64-bit processors. I'm using the x86_64 ISOs from the Centos.org mirrors.
trying to install nameserver in cPanel and getting errors about missing dependacies.
when I try and do it manually by running: yum install bind it goes ok for a while then I get the following:
Error: Missing Dependency: e2fsprogs-libs = 1.39-10.el5 is needed by package e2f sprogs Error: Unable to satisfy dependencies Error: Package e2fsprogs needs libblkid.so.1, this is not available. Error: Package e2fsprogs needs e2fsprogs-libs = 1.39-10.el5, this is not availab le. Error: Package elinks needs libcom_err.so.2, this is not available. Error: Package cadaver needs libcom_err.so.2, this is not available. Error: Package util-linux needs libuuid.so.1, this is not available. Error: Package pkinit-nss needs libcom_err.so.2, this is not available. Error: Package openssl needs libcom_err.so.2, this is not available. Error: Package nss_ldap needs libcom_err.so.2, this is not available. Error: Package openssh-server needs libcom_err.so.2, this is not available. Error: Package fetchmail needs libcom_err.so.2, this is not available. Error: Package util-linux needs libblkid.so.1, this is not available. Error: Package cryptsetup-luks needs libuuid.so.1, this is not available. Error: Package pam_krb5 needs libcom_err.so.2, this is not available. Error: Package krb5-libs needs libcom_err.so.2, this is not available. Error: Package parted needs libuuid.so.1, this is not available. Error: Package openssh needs libcom_err.so.2, this is not available. Error: Package quota needs libcom_err.so.2, this is not available. Error: Package readahead needs libext2fs.so.2, this is not available. Error: Package krb5-workstation needs libcom_err.so.2, this is not available. Error: Package cyrus-sasl needs libcom_err.so.2, this is not available. Error: Package mutt needs libcom_err.so.2, this is not available. Error: Package e2fsprogs needs libe2p.so.2, this is not available. Error: Package e2fsprogs needs libext2fs.so.2, this is not available. Error: Package neon needs libcom_err.so.2, this is not available. Error: Package e2fsprogs needs libuuid.so.1, this is not available. Error: Package openssh-clients needs libcom_err.so.2, this is not available. Error: Package krb5-workstation needs libss.so.2, this is not available. Error: Package quota needs libext2fs.so.2, this is not available. Error: Package ipsec-tools needs libcom_err.so.2, this is not available. Error: Package e2fsprogs needs libss.so.2, this is not available. Error: Package gnupg needs libcom_err.so.2, this is not available. Error: Package curl needs libcom_err.so.2, this is not available. Error: Package readahead needs libuuid.so.1, this is not available. Error: Package e2fsprogs needs libcom_err.so.2, this is not available. Error: Package readahead needs libblkid.so.1, this is not available. Error: Package nfs-utils needs libcom_err.so.2, this is not available. Error: Package readahead needs libcom_err.so.2, this is not available.
installing svn on my Directadmin server. I'm trying to get it configured with apache, but I'm having some trouble.
When I run "yum install mod_dav_svn" it tells me there is nothing to do. I'm not sure why this is. I think it may have something to do with Apache 1 originally installed on the server. I upgraded to Apache 2.26 via the new custombuild script by DA.
I have to admit that I really don't even know what DAV (same as webdav?) is. This should be a straight forward install, but I think because of Directadmin it's much more complicated.
I know that I could pay someone to do this for me, but I don't learn anything that way. I'm a CS undergrad, so I really like learning.
I tried installing MRTG in my Linux Server by using help from -
[url]
What i have done till now is -
cd /usr/local/src gunzip -c mrtg-2.16.2.tar.gz | tar xvf - cd mrtg-2.16.2
./configure --prefix=/usr/local/mrtg-2
make
make install After this i am unable to understand what to do, and how to start MRTG graphs.
* the next last step says,
CONFIGURATION
The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory.
This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you.
^^ this is what i am not able to understand.
When i ran the script, (below mention) it gave many errors, how to resolve them ?
[root@c bin]# ./cfgmaker --global 'WorkDir: /home/httpd/mrtg' --global 'Options[_]: bits,growright' output /home/mrtg/cfg/mrtg.cfg eth0 Error: can't resolve "output" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@output::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@output: as no info could be retrieved
Error: can't resolve "/home/mrtg/cfg/mrtg.cfg" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@/home/mrtg/cfg/mrtg.cfg::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@/home/mrtg/cfg/mrtg.cfg: as no info could be retrieved
Error: can't resolve "eth0" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@eth0::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@eth0: as no info could be retrieved
# Created by # ./cfgmaker --global "WorkDir: /home/httpd/mrtg" --global "Options[_]: bits,growright" output /home/mrtg/cfg/mrtg.cfg eth0
### Global Config Options
# for UNIX # WorkDir: /home/http/mrtg
# or for NT # WorkDir: c:mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits
EnableIPv6: no WorkDir: /home/httpd/mrtg Options[_]: bits,growright
Wondered if anyone has managed to install SSL on fasthosts dedicated server?. I have bought an SSL certificate from goDaddy, but it just won't install. Fasthosts support is OK until you tell them that you're dedicated then they just say they can't help technical questions on that, but an engineer can help @ £60 per ½ hour. goDaddy tech support keep sending me the same instructions, and I've now tried 3 times & just not recognised
I would like to install the Mod_evasive for Apache 2.0 on RHEL 4 Server(Cpanel Installed). I downloaded the Mod_evasive source and extracted and used the following command.
# cd mod_evasive # /usr/sbin/apxs -cia mod_evasive20.c
configure: error: Cannot find MySQL header files under /usr/local/webserver/mysql. Note that the MySQL client library is not bundled anymore!
Because mysql installed on another physical server. so how may I fix the problem? can I configure php without "---with-mysql" and "--with-mysqli" parameters? I need my php could access remote mysql server.
I'm using PhantomJS on windows and accessing the files through command line. Now I want to install it on the server I'm working on local host so I want it to be installed on Apache, so that I may integrate Phantom with my html and PHP to be used within a web page. I'm using Windows 8.1 and Apache Server for localhost.
Can I actually do that? How to use it in web services now? How i will use it if I have to make my web online? should I have t ask my hosting provider to place this thing on server for me?
I'm using phantomJS to develop a web service which takes a url as input and returns an image file of the screen shot of the website.
I have had my websites hosted with 1and1.fr for nearly 3 years now and have never had the slightest issue with them. I used to host a static average traffic website plus a punBB forum and some low traffic joomla based websites (nothing that needs much power as you can see).
A week ago, I bought a website (wordpress blog) and the guy included two proxies in the sale. I installed the two proxies and had a lot of trouble installing the wordpress blog so I moved it to another host where it now works all right. However, I am still getting 500 Internal Server Errors on my initial host (I thought it was caused by the wordpress blog) on all my websites hosted at 1and1 and it happens almost every other page!
I have many questions:
- are the proxies the cause?
- how can I know my websites have been moved to another server?
- do you think a VPS can solve the problem, or do I need a dedicated server?
- what is the best solution for hosting proxies?
I have sent a ticket to them yesterday and I am still waiting!
With Windows 2003 server, there are comprehensive lists of what you need to do to secure the server before use. For Windows 2008, I wonder is there such a list? Or is it true as what I heard from Microsoft that it is already secured out of the box?
Anyone has any resources on the hardening or preparation of 2008 for server hosting uses?
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription 2) Look in virtual directories and navigate to error documents 3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
I have been searching everywhere trying to find a tutorial but It is not going anywhere. Basically I need to create 2 nameservers for Godaddy and pretty much so when i type http://mysite.com it goes to my site. I can access everything from http://myip and everything works. Now is there a step by step on how to actually do it in the DNS Manager? I need help like what IP address do I use is it the router ip? The external IP?
