Installing Email Certificate On Windows Mobile 6
May 16, 2008
I have a Windows Mobile 6 (Blackjack II) phone that I am connecting to my cpanel VPS via Pop3.
I have a number of pop3 accounts setup to check for email every 30 minutes. However, every couple days the phone stops downloading mail and if I do a manual send and receive I get a "The Server Certificate is not valid. Continue Anyway?" with a yes/no. If I click yes, the email downloads and then the automated emails will work for several days and then the process is repeated.
Does anyone know how to either disable this check on the phone (no luck finding that yet), or to install the certificate from the cpanel mail server to the phone?
View 0 Replies
ADVERTISEMENT
Mar 17, 2008
ive ordered and have an SSL certificate from godaddy.com
after following their instructions on installing it, I still get a certificate error when accessing my SSL site.
what have I done wrong and how can I install it correctly?
View 4 Replies
View Related
Oct 24, 2009
I usually go mobile and I would need putty in my wm 6.1
is there some sort of "putty" or any other ssh tool where i can run ssh commands?
View 11 Replies
View Related
Nov 3, 2007
I have experimented with the Startcom free SSL certificates but would now like to install a low cost certificate on an Outlook Web Access server that Windows Mobile 5 devices will trust without having to load stuff onto each device.
View 12 Replies
View Related
May 15, 2014
After installing a RapidSSL certificate in a subdomain, https redirects automatically to http,
Plesk 11.5 with debian and last version openssl
Why https redirect to http when I setup the certificate?
View 1 Replies
View Related
Feb 11, 2014
I received an error message "Error: Failed to remove mobile site: Can't delete a site that's not active " when try to remove a mobile website in Plesk control panel and if i try to edit site content i received another error message "Can't access a site that's not active" from [URL] ....
These notification messages are originating from UNITY Mobile platform. The reason is actually hinted in the messages themselves - both the site and the editor account have been already disabled and there are no handlers anymore to modify their status further, so the messages are correct from UNITY Mobile platform's standpoint.
It appears that Plesk control panel has somehow retained in its configuration information about the site availability and is giving the plesk control panel the option to configure the mobile site despite the fact that UNITY Mobile platform is returning "deleted" status back to Plesk. Plesk should be given an option to create a new site instead now.
I would like to know how to manage Plesk in this situation.
View 6 Replies
View Related
Jan 20, 2015
I'm running Parallels Plesk 12 on Debian GNU/Linux 7.6...I have a valid certificate for my mail server : mail.mydomain.tld but I don't find the place in Plesk 12 to put it.
View 2 Replies
View Related
Jul 3, 2014
Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?
Can I install on the plesk server a self-signed SSL cert and avoid the issues?
Can I buy & install a single certificate for that one domain and resolve the issue but not affect others.
Do I need to buy a SAN certificate for the whole server?
BTW I'm running CentOS 6.5 and Plesk 12.
View 3 Replies
View Related
Apr 16, 2007
We have a few users that use SSL email and we decided to purchase a cheap single-root SSL cert over at namecheap for the host name so that it would end the "self-signed cert" whining.
We got the cert installed and it works great for WHM/cPanel and also works for SSL over IMAP and POP3, but the very first email anyone sends (SMTP) per day gives this warning (Outlook Express):
The server you are connected to is using a security certificate that could not be verified.
A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
It seems obvious that the cert used by the SMTP system is not the new one we installed.
We used WHM's SSL/TLS -> Change Server Certificates link to install the cert.
We then made sure that:
/usr/share/ssl/certs/host.domain.com.crt
/usr/share/ssl/private/host.domain.com.key
/etc/exim.crt
/etc/exim.key
...all contained the current cert or key as appropriate.
Just for grins, we even made sure:
/usr/local/cpanel/etc/cpanel.pem
...had the correct pair.
We restarted all the mail services and even restarted the whole server. (I know...Windows reaction...bad tech.)
Does anyone know of a stealth location where the SSL cert for SMTP should be updated?
WHM 10.8.0 cPanel 10.9.0-R139
CentOS 3.8 i686 - WHM X v3.1.0
View 9 Replies
View Related
Jul 9, 2014
I have little problem with Certificate SSL
Have Plesk 12 in Centos...all working fine...but I have assigned dedicated IP for one domain, have request certificate (as admin) for this domain, purchase certificate in Comodo and installed...this certificate working fine and SSL Checker is good...problem is in domain how have assigned this certificate in menu SSL not appear...
I have only Default Certificate (certificate Plesk self signed) and Not Selected...but name for real certificate CA not appear...in Admin IP Address have all ok...IP for this domain and certificate (name of certificate installed) and website.... With this problem is normal? How configure SSL for email?
View 19 Replies
View Related
Sep 11, 2012
I've installed a replacement for the SSL certificate that we use for shared SSL and Plesk access.
How do I get rid of the old one and get Plesk to use the new one for shared SSL and Plesk access?
When I try to delete it I get the message "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
I've found a lot of old suggestions about removing it from the IP, but they don't seem to apply to Plesk 11 for Windows.
When I go to Home -> Tools & Settings -> IP Addresses -> [IP Address] , it shows the domain being used but there's no way to remove it.
View 5 Replies
View Related
Feb 6, 2014
How to enable self add ssl certificate for end users as on linux hosting?
View 4 Replies
View Related
Dec 9, 2014
I want to secure the webmail access (webmail.mydomain.com) with an SSL certificate. In this case, a self signed certificate should be enough because the users using the webmail will trust it.
Latest Plesk 12 and Windows Server 2012 R2, MailEnable WebMail as shipped with Plesk. Horde Webmail.
How would I set this up? I found no setting to enable SSL for the webmail subdomain. And I can not add it as subdomain and assign the self-signed certificate on it (Plesk panel does not allow webmail.mydomain.com as subdomain as it is already in use).
I found these links but they did not really answer my question as the information is mostly outdated (Windows 200):
[URL]
View 18 Replies
View Related
Feb 1, 2013
I want to enable SSL in one of my domains. I've checked old topics about how to do this, but I can't get it done.
I want to use a self-signed certificate. I'm gonna use the SSL to receive and send data from/to an Android device, not to access it using a web browser.
I created my own certificate in SSL certificates (I used the self-signed option instead of Request). I didn't add anything else after that, I didn't add Certificate or anything else.
Once it's been created, I enable SSL on the domain I want. I just enabled the checkbox, there's no combobox to select a certain certificate, but I changed the default certificate on SSL certificates. I thought that was enough, but it wasn't working so I went to IP Addresses, I clicked in my dedicated IP (shared) and selected my new certificate in there, but it's still not working.
EDIT:
I've just seen that Apache Tomcat might not be installed, I'm not sure if that has anything to do with it. If I go to Server->Service Management I can find Apache Tomcat 5.4.4 in the Java tab (it's the only Apache entrance), but it says it's not active since it hasn't been installed or it's not correctly configurated. If I go to Applications->Installed applications Apache Tomcat is not there.
View 1 Replies
View Related
Mar 13, 2013
PRODUCT, VERSION, VERSION OF MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Windows Web Server 2008 SP2 + Plesk 11.0 x86
PROBLEM DESCRIPTION
I've created an self-signing SSL-Certificate an set it up to my server-ip. Then, I got kicked from the server and now, on every site hosted on the server, even the Plesk Panel(https://xxxxxx:8443 is not reacheable. Server-Timeout.
One of the pages is this one: [URL] ....
STEPS TO REPRODUCE
Created self-signing Certificate, only filled in my full Name, Country and Domain.
Got kicked from the server, and now I have no possibility to access my server.
ACTUAL RESULT
Nothing.
Got File Access with a recovery system, but this isn't really working.
EXPECTED RESULT
A working Plesk Panel would be nice.
View 2 Replies
View Related
Oct 22, 2014
Ive bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..
View 1 Replies
View Related
Oct 20, 2014
I added a new SSL certificate in `Plesk -> Tools & Settings -> SSL Certificates` and now want to link an existing domain to it.
However, on domain SSL Certificates page, the only option displayed is to create a new certificate. I can't select one of the existing ones.
Am I missing something? How can I link already added SSL to a domain?
View 10 Replies
View Related
Nov 4, 2006
Where can i find a step-by-step guide on how to install ffmpeg-php on windows?
I got totally lost while doing that. Below are the steps i'v taken so far:
- Dled Windows EXT from here: http://sourceforge.net/project/showf...roup_id=122353 (ffmpeg_new.rar)
- Unzipped it.
-Copied all php_ffmpeg_... dlls into php's ext dir
-Copied avformat.dll and avcodec.dll to system32 folder
-Activated ext (i am using WAMP5)
-Restarted Apache
-Ran phpinfo(); and didnt see the ext activated.
View 0 Replies
View Related
Jan 21, 2009
How do I install Windows on VMWare ESX? A guide would be nice.
View 3 Replies
View Related
Apr 6, 2009
I designed my companies website but we've had a change in IT and php went down. The new guy (who is here to fix things) just sent me this and quite frankly I'm at a loss (i use a VPS, thus never having to deal with this stuff). But seeing how it's my own company I figured I'd try to help.
Here is the question:
Quote:
You are running IIS (windows server). The PHP should be something straight forward, but as we see it is not...
Previously, you had PHP ver PHP 5.2.6 dated may 2008. - it wasn't working correctly.
I updated it with the latest version php-5.2.9-1 dated march 2009. - and now the PHP is not functioning.
My questions, if you know was to figure which option of PHP cgi are you using.
IIS ISAPI module
IIS FastCGI
IIS CGI
Then, when installing the PHP, there are many extensions that are optional to install. Do you know or can you tell me, which extensions are needed by your app?
Honestly, the website just uses a few php includes to template it (and make my life easier). And that's what were trying to get working.
View 2 Replies
View Related
Aug 20, 2008
my current situation is that i'm currently renting out a server in a datacenter, and there is no realistic way I can get physical access. Call me cheap, but I really don't fancy shelling out $100 to get my techs to install it. I do have an idea though, and I just wanted to know how realistic it is / how I would go about performing it.
My server has a rescue shell (uses busybox) that I am able to re-install the OS from (all linux OSes), re-partition the HDD and do general troubleshooting things from. If I was to create a VMware machine on my local computer, install windows 2003 and use a hdd image cloner (from within the machine) to create an image of the HDD, how would I go about copying this image to the server's HDD? I don't know of any cross platform "HDD backer upper / recoverer thingies"
View 6 Replies
View Related
Apr 25, 2007
Has anybody faced problem in installing Windows 2003 SP2 over SP1? I want to know what problem can be faced before I start with the SP2 installation.
View 9 Replies
View Related
Jan 12, 2009
i have a dedicated box with centos.. i wold like to install VmWare workstation and a virtual windows image in vmware program, and then i wold like to make remote desktop on windows image from vmware..
View 2 Replies
View Related
Jul 6, 2007
The company I work for unfortunately runs their site on a IIS server. I want to install some forum software, vBulletin or phpBB onto the server and run it on the same site. PHP of course needs to be installed to do this.
Boss is worried that putting PHP on same server as ASP might take down the site if something goes wrong. What are the odds of this happening if I follow directions and what steps should I take to install?
View 4 Replies
View Related
Jul 1, 2014
Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
View 1 Replies
View Related
Oct 12, 2014
I am trying to install Spam assassin on Plesk 12.0.18 on windows server 2012 r2 . I am getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist
I have tried re-installing and installing spam assassin from command and as per the solution given in below KB: URL....But I an still not able to install in on the server. I have checked all directory paths are correctly located.
View 4 Replies
View Related
Sep 24, 2014
Plesk 12.0.18 updated recently. After resolution of any problems caused by migration, I'm on the last (I think).
By accessing the domain panel and try to install Wordpress on the applications tab, I encounter the error below:
Error: The Following error has occurred During The download of application: HTTP Error (0)
[URL] ....
This error is repeated for the installation of any application, such as Joomla and Drupal.
View 2 Replies
View Related
Feb 10, 2009
I have SSL enabled site on IIS.I want to access it from my PocketPC(Win mobile).But when I try access it, I have been prompted to install a certificate.
Unlike when I try to any HTTPS site (Banking sites) I have never been prompted to install any certificate.
Why am I being prompted with security message with "Yes,No,View certificate" options on it every time I try to access my own server(desktop) via my WIN mobile using active sync.
Unlike When I try to access banking site(https) I was never ever prompted a mesage like above.
How to have same functionality for my application also?
View 2 Replies
View Related
Dec 8, 2008
to launch a web/mobile app that requires the users to choose a hosting plan with their account. I was hoping to allow them to choose from 1GB / 5GB and 10GB plans.
I'm curious to know the best place to host such a service, and how it's possible to sell the space so cheap. For example [url]- They seem quite inexpensive for the storage you get.
Would[url]pricing be the best option or is there anywhere better?
View 5 Replies
View Related
Apr 21, 2007
i have read somewhere you can logon to your server via ssh on your mobile phone. Anyone know what software is needed and how to do this? I'm off on holiday at some point and i could do with an emergency backup plan! I use a Sony ericcson p900 (oldschool i know!)
My 2nd question is:
What enables/disdabled php to access files outside of root? On my current vps, i can't include files like using ../ or full paths to files/folders outside of the public web folder.
View 1 Replies
View Related
Jun 8, 2009
can i configure .htaccess to direct browsers to a different css file based upon their browser type?
That's the short question. The longer question is: how do I set up my .htaccess file to call a different css file based on mobile browsers?
All I want to do create a 2nd version of a css file so that my site's content, when viewed on a mobile browser, calls /mobi/style.css instead of /style.css.
I have the rewritecond statement for all the mobile browsers, and in fact I presently direct all mobile browser traffic to a designated static webpage, which you can see at tastyplacement . com which directs to tastyplacement . com/mobi.
But if I could simply call a different css file, I could have the pages load as they normally would but with a different css file and thus an entirely different look for the website (narrower columns, no header navigation, ie., a stripped down version of the site with the main text intact).
Can it be done?
View 4 Replies
View Related