an email notification for this is coming through every day. It says ended successfully so no errors...
Running task: C:Pleskadmininweb_statistics_executor.exe Started: Fri Jun 19 01:49:01 2015 Ended successfully: Fri Jun 19 01:49:09 2015
If i go to Server -> Scheduled Tasks and look for it, it cannot be found anywhere. Also scheduled tasks only shows system users, not 'Plesk Administrator' as the kb articles refer to.
Simple... new Plesk 12 includes this fancy feature to tell me which Wordpress plugins and themes need updating (because I obviously can't do this myself). But maybe I don't want to update some plugins (because they've been customized and changed)... how do I....
STOP Plesk 12 from sending me Wordpress update notification emails EVERY DAY!???? The auto-update is off... and EVERY day is sends me (and all of those clients) an ugly email about their Wordpress installations. How do I turn this OFF?
I created a New Client Default Domain by copying plesk's original Default Domain.This template is for clients we move from older versions of plesk up to servers with plesk 12.x. Under resources for that "Service Plan Name"
I have Sites published with Presence Builder set to 0 and.Allow customer to create trial Presence Builder websites. Not checked.When I log in as the client I still see Presence Builder with edit Website.I also confirmed the correct plan was picked for that subscription by picking the new "New Client Default Domain" and under add-on plans I picked "remove"
But when I log in as the "client" to see what they would see I see Presence Builder and Edit Website available.How do I get rid of that selection?I can see a client clicking on it and basically over writing their current website.
I have the latest centos 7 and plesk 12 installed on a dedicated server and i wish to add a new IP to use on a specific website. However, when I am trying to add the IP in plesk i am getting the following error:
Code: Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '85.214.93.196' netmask '255.255.255.255' up exited with non-zero status 127
I have read somewhere on the forum that installing iptables can fix this but cents 7 is using the new firewald and i am wondering if in the future such a change will not affect the well being of the overall server.
Is there any solution to this problem or will there be a fix from Plesk in the near future ?
Currently i'm running a server with 12 customers on it. They all have their own domainnames and subscriptions. One of them wants to secure his site with SSL and also his mail traffic. Currently he is using the mail.hisdomain.com server for receiving/sending e-mail. I want to install a certificate so that domain is secured. How can i accomplish this?
When i look on the server there is only 1 PEM file for the whole server. If i'm going to install his KEY and CRT in that file than all my clients will use that certifcate right? Can i make it so that only his domain uses thoses certifcates? Plesk is configured to use Postfix with Courier.
I'm trying to use spamfilter to block mail from specific address, adding this e-mail to spamfilter in mail account settings, but it doesn't work. In logs I see:
spamc[13430]: skipped message, greater than max message size (256000 bytes).
A domain on my Plesk does not receive incoming emails from a specific external domain. Other domains on the same server are receiving correctly emails from the same external domain. DNS are configurated by the same way (external of Plesk). Can't see a bounce anywhere. External sender does not receive a bounce too...
So: - I've deleted the domain in Plesk and re-created it (just in case...). - I've added the external sender in spam whitelist (I've tried in user conf and in server wide conf) - When I send mail to a different address in the same server, I can see the mail in syslog and maillog (send or bounced) - When I send from this external f***** domain to my domain, I can't see anything in syslog and maillog
I'm using Plesk 11.5.50 CentOS 6.5 64bit with Qmail. I have installed a SSL certificate on mail server "mail.company.tld" and is running successfully with smtp/pop3/imap4 daemon. Every user agent uses "mail.company.tld" for smtp/pop3/imap4. The qmail name is "mail.company.tld" (file me). The server has about 300 domains and 1000 accounts.
Now we want to add a new SSL certificate, called "mail.newcompany.tld", and use it only for certain domains. I would like to know if is possible to use the new SSL "mail.newcompany.tld" for a specific mail domain without using the old SSL "mail.company.tld" that isn't expired yet. From Plesk Panel I haven't found a section for using the SSL for a specific mail domain.
I have setup Nginx to serve static pages. I cache some pages and therefor they are static and should be served by Nginx. Now, how can i check if a specific page actual was served by Nginx and not Apache?
I am experiencing a weird issue after a Plesk upgrade (from 11 to 12, installed on Ubuntu 12.04).
FTP/SFTP is not working for all users in one specific domain. When using the latest Filezilla client, I receive the following error when I try to connect in SFTP with the main user of this domain
Error: Received unexpected end-of-file from SFTP server Error: Could not connect to serverClick to expand...
IP-Pair1 is supposed to host admin and customer access. = Plesk-admin-interface (lighhttpd?) on 80/443 instead of 8443 (ssh on 22, ftp ...)
IP-Pair2 is supposed to host visitor access. = Plesk webspaces (nginx/apache) on 80/443
So I want to stop nginx from grabbing ports 80/443 of IP-Pair1 and listen to IP-Pair2 addresses only. Then I want to set plesk-admin interface to listen to 80/443 on IP-Pair1 only.
In plesk I have set the ssh rule to allow from source, deny others and added my IP. However, if I connect my PC to my work VPN, I can still login via ssh, even when I am on a different IP as the allowed IP
I built the system on Centos 6.5 with plesk 12 with a range of ips. I then (after the fact) copied the IPs of the old server to the new and moved all the domains to their IP's. This way today we flipped the routes and all should work.
The problem is that the domains only work when putting :7080 behind them. It seems like the httpd is only listening on the old IP and not the new ones. How to make plesk/httpd listen with the new IP's on port 80"
httpd.conf
#Listen 12.34.56.78:80 Listen 7080
I added all the other IP's and tried changing ports under Listen but that does not work either. So changing the listening port does not work.
I have a plesk12 webhost linux. We are having an issue about horde webmail. Weird because one of the email user cannot open email coming from specific email address and this is the message:
Error Message: Error when communicating with the server and There has been no contact with the server for several minutes. The server may be temporarily unavailabe or network problems may be interrupting your session. You will not see any updates until the connection is restored.
Now upon checking to the error logs of httpd, I found the ff: [Tue Jul 14 16:53:09 2015] [warn] [client 202.X.X.X] mod_fcgid: stderr: PHP Fatal error: Class 'Math_BigInteger' not found in /usr/share/psa-pear/pear/php/Horde/Mapi.php on line 172, referer:http://webmail.domainsample.com/imp/dynamic.php?page=mailbox
When I create Mailbox for customer, spamassassin have status (default):
HTML: Status false The score that a message must receive to qualify as spam What to do with spam mail move Add the following text to the true beginning of subject of each message recognized as spam Modify spam mail subject text ***SPAM***
Black list ================================ Server-wide black list:
User's black list:
White list ================================ Server-wide white list:
User's white list:
But i want it:
HTML:
Status false The score that a message must 7 receive to qualify as spam What to do with spam mail text Add the following text to the true beginning of subject of each message recognized as spam Modify spam mail subject text ***SPAM***
Black list ================================ Server-wide black list:
User's black list:
White list ================================ Server-wide white list:
User's white list:
Not Move, it only text at "What to do with spam mail text"
I've got a e-mail notification problem since i upgraded from Plesk 11.5 to Plesk 12: One specific Application Update for customer X is being sent to all my customers.
Last week we did have a problem with a busted customer portal. ( not customer X, plus still on Plesk 11.5 ) I fixed this by using this procedure: [URL] ..... Restored two records and problem solved.
As a temporary resolution we disabled Application Updates for our customers, but I do want that my customers receive Application Updates, but just the one where they are the recipient.
I've paid for a site to do some harding of my new server and I'm not up to speed with it all yet.[url]
They say they've completed it but I can not find any config files for mod_dosevasive in my httpd.conf file. Is there a way I can check to see what packages or software or tools are installed on the server?
Now what I want to do is restore 11 files from the backup. What I certainly don't want to do is restore the entire domain as I don't want to loose any changes since the last backup.
As it seems impossible to extract files from the archives.
I migrate to 12.0.18 Actualización #28, última actualización Dic 11, 2014 02:12 PM.
When I try to Access to the domains in a specific client I´m geting this error:
Internal error: D:Plesk wes.escarmerieradomenech.com is out of webspace MessageD:Plesk wes.escarmerieradomenech.com is out of webspace File Webspace.php Line401 TypePleskFatalException
The 'Additional Administrator Accounts' feature enables a Plesk login to be created for each administrator, so they don't have to share a login, which is good practice.
However, Plesk sends notification emails (e.g. Notification of problem domains) to all the administrators. How can we control who is sent notification emails? In our case, we only want them to go the main admin account.
In the 'Additional Administrator Accounts' form, the 'email' field requires a value. We could set this to a dummy value, but this would probably generate non-delivery emails.