Plesk 12.x / Linux :: Running On CentOS 7 Azure Cloud
Jan 19, 2015I would like to ask if its possible ( supported ) to run Parallers Plesk 12 Panel on centos 7 ( openlogic) in Microsoft Azure infrastructure.
View 3 Replies
ADVERTISEMENT
Plesk 12.x / Linux :: Brand New CentOS 6.5 Server Running 12.0.18 Crashing Randomly
Aug 19, 2014I have a brand new A8i server from 1&1 that has crashed twice today and could only be rebooted through the 1&1 control panel (not Plesk). Out of the blue the server is not accessible from the Plesk CP and is not responding to pings. I have looked through the logs and do not see anything that stands out (I am not very Linux savvy). Is there somewhere specific that I can look that would tell me why it is locking up/crashing? I have only had the server about 2 weeks and am only running email on it (no websites besides webmail and Plesk CP). It is possible that there is a hardware issue, but I cannot have 1&1 check it until after hours tonight.
Server is an 8 core Intel Atom 2.6GHz with 8GB RAM.
Plesk Automation :: PPA Install On Infrastructure Running Parallels Cloud Server - IPTables / Firewall
Apr 9, 2014I'm in the process of installing PPA on infrastructure running Parallels Cloud Server. Each container has 2 interfaces, one public facing and a private interface for inter-server communication.
No problems installing PPA 11.5 (specifying IP's on commandline) or adding service nodes however, the firewall rules the documentation speaks of are nowhere to be seen? i.e.:
Important: After the installation, PPA creates the special firewall chain PPA-SN-Rules-INPUT used for communication with service nodes. Do not change it, otherwise, you will not be able to add service nodes to PPA.Click to expand...
Has this been dropped from PPA 11.5 ? (I recall seeing the firewall settings in 11.1) There is also no sign of the ppa.firewall tool that is also mentioned.
The only rule I see inserted is for Postgres on the management node, and 2 for pleskd on all of the nodes (open to world!).
Can I Have Mix Windows And Linux VPSs On The Same Server Running CentOS
Feb 15, 2009if i can create 2 VPS with completely different OS such as CentOS5 and Windows 2003 Std.
The main server will be running CentOS with HyperVM.
Servers Failover With DNS Running On The Cloud
Apr 11, 2009im looking to add failover protection at my main server, in order that if it goes offline, all the traffic can be in a automatic way redirect to a failover / backup server.
For the failover server i was looking to buy a low-cost dedicated server located in other datacenter and have my dns be run at this failover server, but now i have been looking at Cloud Hosting, like Amazon or Mosso CloudServers and as it seems a very stable network, im thinking if it will be best to have setup/running my DNS at a Cloud Host...
So what do you think it would be best:
Option A:
1 main server
1 failover dedicated server
1 cloud (amazon/mosso) virtual server to run DNS
or
Option B:
1 main server
1 failover dedicated server (running the DNS)
Cloud Solutions For Running Web Application For International Users
Nov 6, 2009I know CDN is only for static files, but is there such cloud host service where users from Asia, Europe and USA will face no serious latency issues?
Is this going overboard, would using Amazon Cloud suffice?
or would purchasing dedicated servers in each region like USA, Europe, and Asia be better?
Plesk 12.x / Linux :: Cron Not Running
Dec 30, 2014I have just recently moved to Plesk web admin from cpanel. I have been trying to get the cron to run for the past 48 hours but no luck. Bellow is the code i have been trying to execute via cron but It does not run.
"/usr/bin/php /var/www/ vhosts/mydomain. com /httpdocs/billing/index.php cron"
Plesk 12.x / Linux :: Not Running On CLoudlinux?
Dec 12, 2014I have installed plesk on cloudlinux
But I can not see an login prompt when i try to connect with https://myserverip:8443
netstat -tulpen gives me the Output
EN 0 183156 69422/httpd
tcp 0 0 :::8443 :::* LIST
Plesk 12.x / Linux :: Can Have WAF ModSecurity And Firewall Running Together
May 26, 2015I currently have the Web Application Firewall (ModSecurity) installed but would like a visual interface to block IP's, subnets etc.. Can I install the Plesk firewall as well without any conflict with the Web Application Firewall?
View 3 Replies View RelatedPlesk 12.x / Linux :: PHP Scripts Not Running Even As Root
May 14, 2015I tried to setup a cronjob to run a php script. Something simple like this:
php /var/www/vhosts/onlinehome-server.info/mydomain.co.uk/script.php
didn't worked. So I used the terminal as root and I noticed that php is not running script not even as root.
not even commands like php -v works. I don't get any error back.
Plesk version 12.0
Plesk 12.x / Linux :: Can't Turn Off Running Task
Jun 19, 2015an email notification for this is coming through every day. It says ended successfully so no errors...
Running task: C:Pleskadmininweb_statistics_executor.exe
Started: Fri Jun 19 01:49:01 2015
Ended successfully: Fri Jun 19 01:49:09 2015
If i go to Server -> Scheduled Tasks and look for it, it cannot be found anywhere. Also scheduled tasks only shows system users, not 'Plesk Administrator' as the kb articles refer to.
Plesk 12.x / Linux :: Installing Mcrypt On Linux Centos 5.5 PHP 5.3.3
Jun 20, 2014I am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.
Here are my details:
Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12
I have tried installing all sorts of different repos and it just isn't working.
When I try to install using # yum install php-mcrypt I get the following:
Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator
[Code].....
Plesk 12.x / Linux :: PhpMyAdmin Running On Nginx But It Is Not Installed
Jan 3, 2015i've uninstalled nginx and php-fm from plesk panel.but phpmyadmin info still showing it is running on nginx 1.6 and while uploading sql file i'm getting 503 gateway error.
View 3 Replies View RelatedPlesk 12.x / Linux :: After Update To 12.0.18 Scheduled Task Not Running?
Sep 21, 2014I recently updated from 11.5 to 12. After the update, my simple "Websites & Domains->Scheduled Tasks" is no longer executing.
I verified that the task is still present in Plesk and enabled.
The simple task launches one of my PHP web pages to perform an action:
(set to once a day: Min=30, H=7, DM=*, M=*, DW=*)
wget --quiet --delete-after "http://www.MYWEBSITE.com/some/path/index.php?someparam=somevalue"
This cron job had been working fine for more than a year but stopped working after the update.
Plesk 11.x / Linux :: Change Default Settings For Running PHP
Nov 10, 2014Is there a way to set the php-handle for all domais as "fastcgi".
At the moment when i create a domain, it will be run as "apache".
I like to change it to "fastcgi". I know there is way, to change it in the databases, but i forget where was it...
Plesk 11.x / Linux :: Running Auto Update Of Panel
Jun 7, 2014my plesk control panel 11.5.30 has problems running the auto update of the panel. During the upgrade, the server reboots even after an error message appears that shows the following message: Can't parse /root/parallels/products.inf3: Error reading end tag.
View 4 Replies View RelatedPlesk 12.x / Linux :: Autoinstaller Finished And Xinetd Is Not Running
Nov 20, 2014This happens in around 30% of the cases when I run CLI autoinstaller to update/install/remove packages.
Code:
Patches were installed successfully.
The changes were applied successfully.
Synchronizing the Debian APT package index files...
# pgrep -lf xinetd || service xinetd start
Starting internet superserver: xinetd.
# pgrep -lf xinetd || service xinetd start
849 /usr/sbin/xinetd -pidfile /var/run/xinetd.pid -stayalive
As you can see, after the autoinstaller finishes, xinetd is not running and has to be started again.
Plesk 11.x / Linux :: Pmmcli-daemon Running Constantly?
May 23, 2014For some reason pmmcli-daemon has started to run constantly at 90-100% CPU even when it's not backing up.
No error message emails are generated.
I can stop it, but then I find it running after it has completed the domain backups.
Plesk 12.x / Linux :: MySQL Process Running Unlimited With High CPU?
Mar 23, 2015I have a single mysql process that never stops and running with 10-200% CPU load: URL....
I restart mysql => process coming back
I restart server => process coming back
I kill process => process coming back
I have run:
# mysqladmin -uadmin -p`cat /etc/psa/.psa.shadow` -i 1 processlist
but there was noting that runs >10min.
Code:
> SHOW FULL PROCESSLIST;
+------+-------+-----------+------+---------+------+-------+-----------------------+
| Id | User | Host | db | Command | Time | State | Info |
+------+-------+-----------+------+---------+------+-------+-----------------------+
| 328 | admin | localhost | psa | Sleep | 56 | | NULL |
| 8110 | admin | localhost | NULL | Query | 0 | init | SHOW FULL PROCESSLIST |
+------+-------+-----------+------+---------+------+-------+-----------------------+
2 rows in set (0.00 sec)
I have strace the PID
Code:
# timeout 1m strace -f -c -p 5873
Process 5873 attached with 30 threads - interrupt to quit
Process 10499 attached (waiting for parent)
Process 10499 resumed (parent 5873 ready)
Process 10502 attached (waiting for parent)
Process 10502 resumed (parent 5873 ready)
Process 10503 attached (waiting for parent)
[code]....
I found with google a hint for high cpu URL....I have deinstalled "health monitor" module, but that was not the reason.I use plesk 12.0.18 Update #38 with CentOS 6.6 (Final).
Plesk 12.x / Linux :: Server Running Out Of Memory By Sort Command
Mar 26, 2015Why servers are being run out of memory by the 'sort' command even when the logs are small? Here's what is currently on a site:
-rw-r--r-- 2 root root 22392143 Mar 26 11:40 access_log
-rw-r--r-- 2 root root 68018869 Mar 26 10:50 access_log.processed.1
-rw-r--r-- 3 root root 67671664 Mar 26 09:50 access_log.processed.2
-rw-r--r-- 1 root root 69908 Mar 26 10:50 access_log.stat
[Code] .....
Plesk 12.x / Linux :: Php-cgi High Cpu Load Website Running Slow
Dec 10, 2014Today, without any change on the server side my single running website on my server started running low. After checking the running processes I realised I have these 8 processes running with high cpu load something that didn't had before.
4245 user 20 0 283m 103m 10m R 85.1 0.3 6:44.88 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4243 user 20 0 241m 68m 8736 R 83.8 0.2 6:33.45 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4259 user 20 0 254m 82m 8720 R 83.5 0.3 6:11.00 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4244 user 20 0 282m 103m 10m R 82.1 0.3 6:46.49 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4247 user 20 0 248m 76m 8712 R 78.8 0.2 6:50.31 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4264 user 20 0 258m 85m 8712 R 72.9 0.3 6:49.83 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
apache error log doesn't show any warnings, errors.
Plesk 11.x / Linux :: Running Script From Event (Hosting Settings Created)
Jun 10, 2014I'm trying to run a simple bash script when a new account is created, because I need to move some files automatically. So what I did:
I have created a simple bash script for testing if Plesk run it, called move_some_files.sh under /var/www
Code:
#!/bin/bash
echo "${NEW_SYSTEM_USER} ${NEW_DOMAIN_NAME}" >> move_some_files.log
I created this file as root and did chmod +x.
I created a new 'Hosting settings created' event running as root and with the highest priority with this command: /var/www/move_some_files.sh
I created a new customer with to test it
But, is not running the script! If I try some command directly on the event like 'touch /var/www/new_file' it's created, so the event is running, but not my script.
Plesk 12.x / Linux :: Email Domains Disappearing After Running Mchk Command
Apr 21, 2015We found an issue after running plesk mchk command to restore all the mail server settings with SpamAssiassin settings enabled for all email accounts on the Plesk Server.
After running the mchk command, we found many warning messages in the psa maillog as following "authpsa : No such user [Email account] in mail authorization database".
We checked the mysql database for records on the Email Account that the error is referring to but found that the Domain Email Database was deleted (email address, password, email data). Is this something normal that the plesk mchk command does? Plesk 12.0.18 Update #37
Plesk 11.x / Linux :: PHP Support 11.5.30 - Cannot Change Or Choose Running As Apache Module Or CGI Application
Jul 17, 2015Hosting Settings
There is no php support - so i can´t change or choose running as apache module or cgi application (s. screenshot)...
OS Ubuntu 12.04.5 LTS
Panel version 11.5.30 Update #50, last updated at July 17, 2015 03:46 AM
Plesk 11.x / Linux :: Setting Up SSL On CentOS With SNI
Jan 31, 2015I've searched the web to set up ssl on 1 domain of 2 installed op 1 ip address. It seems easy: setup virtual hosts, turn ssl on and point to your certificates.
I'm completely lost. I setup the certificate from geotrust in plesk panel 11.5 as described in the manual but that didn't work, apparently because i have 2 domains and 1 ip.
So i started looking to adapt my vhost settings to use sni. First problem: i can't find the setting of the virtual host.
Secondly where can i find the path to the .key and .crt files.
How i can install a ssl certificate on one of the two domains sharing 1 ip.
Plesk 12.x / Linux :: How To Upgrade To PHP 5.4 On CentOS 6
Feb 8, 2015How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies View RelatedPlesk 12.x / Linux :: How To Install MagicSpam On Centos 7 X64
Aug 22, 2014We purchased license for MagicSpam and now couldn't find anywhere installation for Centos 7...How to install?
View 2 Replies View RelatedPlesk 12.x / Linux :: Migrating From Debian To CentOS?
Jan 29, 2015I am attempting to migrate from a debian os server with the latest plesk 12 to Centos (rather cloudlinux) and would like to know if there are any options that should not be checked during the process?
I recently tried to do the normal procedure, which is to transfer all objects, etc. And for some reason the percentage went from 1-50% to then back to zero.. but when clicking to check the current status, its still working
Status: in progress
Current operation deploying domain.com
current operation progress: empty bar
Different sites are transferring, but I am not sure if the migration will effect the system because the difference in OS folder structure and file location.
Plesk 12.x / Linux :: Can Install Imagemagick On Centos 6.5
Dec 10, 2014Can i install imagemagick on centos 6.5 with this commands?
ImageMagick:
[root@server ~]# yum install ImageMagick
[root@server ~]# yum install ImageMagick-devel
PHP-imagick:
[root@server ~]# yum install gcc (Please note: if it is already installed, then it will be updated if required)
[root@server ~]# yum install make automake
[root@server ~]# yum install php-pear
[root@server ~]# yum install php-devel
[root@server ~]# pecl install imagick
Now you will have to add the imagick extension in your PHP condifuration file:[root@server ~]# cd /etc/php.d/[root@server ~]# nano -w imagick.ini
Then you put following line in that file:extension = “imagick.so”..And save it with <CTRL> <O>After finishing this, you will have to restart Apache as follows: [root@server ~]# service httpd restart
Plesk 12.x / Linux :: CentOS 7 - Add New IP To Use On Specific Website
Jan 2, 2015I have the latest centos 7 and plesk 12 installed on a dedicated server and i wish to add a new IP to use on a specific website. However, when I am trying to add the IP in plesk i am getting the following error:
Code:
Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '85.214.93.196' netmask '255.255.255.255' up exited with non-zero status 127
I have read somewhere on the forum that installing iptables can fix this but cents 7 is using the new firewald and i am wondering if in the future such a change will not affect the well being of the overall server.
Is there any solution to this problem or will there be a fix from Plesk in the near future ?