i saw very often in the active sessions site following line:
Username Empty IP empty Date Nov 30, -0001 12:00 AM Idle time 00:45:39
What is that and how can is stop this or get it fixed ?
i hosted one server socket application in my dedicated server which is recving the data from different units(vehicle tracking system) through port no 4444.in dedicated machine i am keeping one active session always...that means my socket application exe is opened always in an active session ie sectionA.This session is not logged off insted i used to close the rdp for keeping this session active.Based on settings if userA accessing SessionA then userB cannot able to reach the active sessionA at the same time instead new sessionB will open for userB.
now my question is
if userB also opened socket application in SessionB with same portno ,then which soket application will recive data from the units...whther the applictaion from sessionA or from SessionB?
I have a problem with my Parallels Plesk Panel (v 11.5.30) in CentOS 6.4.
When I try to send an email by RoundCube to an other email address with the same domain (that is hosted in my server) i get this error:
Error SMTP (550): ... "xxxxxx@mydomain.com" (5.1.1 <xxxxxx@mydomain.com>: Recipient address rejected: User unknown in virtual mailbox table)
I'm using Plesk 12.0.18 on a virtual container powered by Parallels Virtuozzo Containers, and I cannot get the FTP (personal repository) working.In my settings, I've unchecked Passive mode (as the VPS is configured with the Virtuozzo firewall) yet Plesk still seems to test the connection with passive mode, which I know will fail. However active FTP on the command-line works fine.
My settings:
Host: ftp.hidrive.strato.com
Directory: /users/xxx/plesk_backups
FTP username: xxx
Password: xxx
Passive mode: UNCHECKED
FTPS: UNCHECKED
Saving the repository fails with (after a hang): Transport error: unable to list directory: Curl error: Couldn't connect to server
If the "directory" doesn't exist on the FTP server it fails immediately, so the connection is working, and it seems to be on the "dir/ls" command that it fails - which is a symptom it's using Passive mode.
According to the Panel log file, Plesk issues the below command:
[21-Oct-2014 02:53:55 America/Chicago] PleskUtilException: '/usr/local/psa/admin/bin/pmm-ras' '--check-repository' '--dump-storage=ftp://xxx@ftp.hidrive.strato.com/users/xxx/plesk_backups' '--use-ftp-passive-mode' failed with code 125.
Note the "--use-ftp-passive-mode" even though "passive mode" is UNCHECKED in the UI.
From a terminal:
# ftp ftp.hidrive.strato.com
Connected to ftp.hidrive.strato.com (85.214.3.73).
220 Another visitor. Stay a while...
Name (ftp.hidrive.strato.com:root): xxx
331 FTP login okay, send password.
Password:
230 User logged in, proceed.
[code].....
ERROR: Zend_Db_Adapter_Exception: SQLSTATE[HY000] [1049] Unknown database 'psa' (Abstract.php:144)
View 3 Replies View RelatedI have setup bind in centos 6.5 and then edited /etc/named.conf and added the lines
The extension produced but I am getting the following error when restarting the bind service
Error in named configuration:
/etc/named.conf:2: unknown option '...'
/etc/named.conf:14: unknown option '*'
/etc/named.conf:21: 'options' redefined near 'options'
The following code suggested by plesk slave dns manager extension
Code:
options {
...
allow-new-zones yes;
};
key "rndc-key-mainserver ip" {
[Code] .....
After I removed ... from the options now I get the following error :
/etc/named.conf:51: unknown key 'rndc-key'
I just upgraded from 11.0.9 and i got the following error
ERROR: Zend_Db_Statement_Exception
Eine Ebene höher
SQLSTATE[42S22]: Column not found: 1054 Unknown column 'ipAddress' in 'where clause'
A Google Search shows that under Windows there is dbupgrade.exe
Is there such a tool under Linux too??
After successful upgrade PHP, and not successful with ioncube i get:
Failed loading /usr/lib/php/modules/ioncube_loader_lin_5.4.so: /usr/lib/php/modules/ioncube_loader_lin_5.4.so: cannot open shared object file: No such file or directory
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP 5.4.32 (cli) (built: Aug 21 2014 07:33:35)
Copyright (c) 1997-2014 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies
with the ionCube PHP Loader v4.6.1, Copyright (c) 2002-2014, by ionCube Ltd., andClick to expand...
One of my clients has 2 accounts:
- foo.com, with a mail account info@foo.com.
- bar.com, with domain forwarding to foo.com.
Sending an email message to info@foo.com works.
Sending an email message to info@bar.com doesn't work. When using the ZoneEdit SMTP test utility I get the following error message:
Code:
> RCPT TO:<info@bar.com>
< 550 5.1.1 User unknown: info@bar.com
I checked "/etc/vdomainaliases/bar.com" and "/etc/localdomains", they are configured properly.
Any suggestions?
I've been with my Strato VServer and it installed Plesk on Linux a big problem.
I coming no longer in the Plesk Dashboard and the following code appears:
Syntax error or access violation: 1286 Unknown table engine 'InnoDB'
Here are the contents of my my.cnf
#
# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
#
# One can use all long options that the program supports.
[Code] .....
I am using Parallels Plesk Panel v. 11.0.9 on a V-Server provided by Strato (Germany), the OS is Ubuntu 10.04 LTS. Established and running under Plesk is a MySQL-Database, administered via Plesk by PHPMyAdmin 3.5.8.1. PHPMyAdmin offers the following information:
Datenbank-Server
Server: Localhost via UNIX socket
Software: MySQL
Software-Version: 5.1.41-3ubuntu12.10 - (Ubuntu)
Protokoll-Version: 10
Benutzer: admin@localhost
Server Zeichensatz: UTF-8 Unicode (utf8)
Webserver
sw-cp-server
Datenbank-Client Version: libmysql - mysqlnd 5.0.8-dev - 20102224 - $Id: 731e5b87ba42146a687c29995d2dfd8b4e40b325 $
PHP-Erweiterung: mysql
Click to expand...
When I update servers via CLI autoinstaller, I always (afair) get this mysqldump error message:
Code:
Stopping psa... * Stopping Plesk engine pool manager sw-engine-fpm
...done.
done
-- Warning: Skipping the data of table mysql.event. Specify the --events option explicitly.
mysqldump: Got error: 1049: Unknown database 'atmail' when selecting the database
===> Cumulative APS controller database (apsc) upgrade has been started.
===> Cumulative upgrade of APS controller database has been completed.
===> Cumulative Plesk database upgrade (revertable stage) has been started.
===> Preparing Plesk database upgrade (revertable stage).
===> Cumulative upgrade of Plesk database (revertable stage) has been completed.
Reading package lists...
There is no database "atmail" on any of our Plesk servers. Simple solution should be to first check if the DB exists before performing actions on it.As a bonus, perhaps it would be possible to suppress the warning about mysql.event.
I am planning to get a Juniper firewall, but due to SSG140 has a maximum of 48,000 concurrent sessions per second, so it triggers me how do I measure the concurrent session of a linux server of the total throughput instead of just port 80?
OS: CentOS
I have set up my Virtual Private Server and uploaded all my site's files to /var/www folder. Before that, there was an old simple 'index.html' file
Code:
<html>
<head>
<title>INDEX</title>
</head>
<body>
<h1>IT WORKS!!!!</h1>
</body>
</html>
and when I typed the address www.mydomain.com it displayed correctly. Then I deleted this html and uploaded my files through FTP and now the browser says :
Code:
Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I have manually removed a user from the Ubuntu OS. The user isn't present in the Plesk-UI too.On my Vhosts SuexecUserGroup is still set to this non existent user. So the apache can't restart...
Apache message:
bad user name xxx
Action 'configtest' failed.
Are there corresponding UI-fields in Plesk or can I edit any Plesk-Db-Table to fix this?How is SuexecUserGroup set by Plesk?
I've been messing about a lot recently and I've had to rebuild my VPS template a lot in the past month. For some reason, Plesk is finding user data from a bunch of previous instances, so I've got to a point now where it's saying users exist when they can't be found in the panel interface.
I don't know how my VPS provider's infrastructure works but I'd presume that when I rebuild the server it's a total new instance and no data should carry over.
Is the the user data stored locally, and how would I go about clearing out the obsolete data?
Is it possible to set the subscription shell option of an subscription via xml api? I see it is possible via cmd "/usr/local/psa/bin/subscription -u {subscription} -shell /usr/local/psa/bin/chrootsh" But how is it possible via xml api?
View 1 Replies View RelatedI need to create a SSH account for an subscription. This account is not allowed to access other domains. How do i do that?
I know how to create an SSH account with remote access.
I use Plesk 11.5.30 on my vServer. I created a new domain with a new web user and /bin/bash (chroot) setting. I can't login with a SFTP connection to this domain only normal FTP connection works. With existing users I don't have this problem.
View 1 Replies View RelatedWe have a website under httpdocs/. We can change/delete files with a ftp user : "ftpold". All is ok. We must create another ftp access for another company which can access only to httpdocs directory (not to logs/, error_docs/...).
So we have create a ftp access in Plesk. But with this ftp connexion, we can not update/delete files ou update rights.
So we decide to change rights on the files/directories under httpdocs with the new ftp access :
httpdocs# chown -R ftpnewsacln *
The is no errors but the files:directories are always with the old ftp user :
httpdocs# ls -l
ftpold psacln ... libs/
ftpold pscln ... index.php
Why ? How can i create another ftp access ?
I have a virtual server linux with Strato. When I have upgrade from 11.5 to 12.0.18 in spanish I have seen that I can´t add a new domain in power user. The user has ilimited domains and I have less that 10 domains. I see the buttom of "add domain" as in 11.5 and appears all the fields to complete, but there is not buttom to accept o decline. There is no problem with alias or subdomain. I have reinstall 11.5 and dissapeared the problem, but when I upgrade again to 12.0 this buttom doesn´t appear.
View 1 Replies View RelatedI'm running a brand new installed VPS with CentOS 6.6 and Plesk 12.0.18. I created a subscription and by default a FTP user is created. However, I cannot login with these credentials. I also created a new user but the same problem presists. I'm 100% sure that the username and password is correct.
Filezilla gives me and 530 Login incorrect. But if I look at the /var/log/secure file, I see this odd message (FTP username = test):
Jan 30 16:01:45 transip proftpd: PAM unable to dlopen(/lib64/security/pam_stack.so): /lib64/security/pam_stack.so: cannot open shared object file: No such file or directory
Jan 30 16:01:45 transip proftpd: PAM adding faulty module: /lib64/security/pam_stack.so
Jan 30 16:01:45 transip proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
Jan 30 16:01:45 transip proftpd[18085]: 127.0.0.1 (x.x.x.x[x.x.x.x]) - USER test (Login failed): No such user found
No such user found, although it is created with Plesk.
How can I create an FTP user read-only in plesk 11.5?
View 1 Replies View RelatedIt seems that changing the IP of a web site (which I can't get to work) reactivates records from the default DNS template that have been deactivated...for example the default TXT records are activated, so now the domain may have two SPF records, only one of which is correct. Having multiple A or other records is potentially worse, if, say, "mail." now points to the wrong server.
View 2 Replies View RelatedCompany is using software Parallels Plesk Panel 11.5.30 for Windows
And
There currently are in trouble about how some websites it's can't active Customer, domain or Subcriptions on 1 Resellers.
I would like my Plesk users to each have access to the mail folder for their domain. cPanel appears to do this by default by creating a folder named /home/user/mail which contains a subfolder for each domain name. Plesk, however, places all email folders together in the /var/qmail/mailnames folder. I would like to end up with a structure similar to how cPanel does it, but it looks like there are at least a couple of ways to accomplish that and I'm not sure what would be the most safe, reliable way to do it.
One way I can think to do it would be to override the Plesk dovecot config by adding a new config file to /etc/dovecot/conf.d. I think changing the values for mail_home and mail_location as follows would possibly work.
Old values:
mail_home = /var/qmail/mailnames/%Ld/%Ln
mail_location = maildir:/var/qmail/mailnames/%Ld/%Ln/Maildir
New values:
mail_home = /var/www/vhosts/%Ld/mail/%Ld/%Ln
mail_location = maildir:/var/www/vhosts/%Ld/mail/%Ld/%LnMaildir
I see a potential issue with this solution; the %Ld for an add-on domain will probably be the add-on domain, and there will not be a folder within /vhosts/ with that name. Perhaps there is another variable for the primary domain that I could use there.
A second way I can think to do it would be to add a symlink in /var/www/vhosts/domain/ named "mail" that points to the actual mail folder for a domain. Again, issues would probably occur here with add-on domains, and I also can't see a way to automate this. I also predict permissions issues with this solution.
I am using Dovecot if that makes a difference.
Looking at a server with Plesk 12 installed there is no root user shown in tools & settings / scheduled tasks.
Login as root and crontab -l shows root has some tasks.
On a similar server with Plesk 11.5 installed can see root user shown in tools & settings / scheduled tasks.
I facing a serious problem with my qmail and plesk 11.0.9.I found the way spammer did with my server by listening everything on port 25. Maybe he know the RCPT hosts of mine, and they send emails with random username but with domain hosted on my Plesk. (user1@mydomain.com, user2@ my domain.com, ... userxxx@mydomain.com).
qmail only check domain in RCPT if spammer input:"mail from user1@mydomain.com" - (with out ":") - no email address on my server.then server reply: 550, no mailbox here by that name. (#5.7.17)
But qmail check username and domain if spammer input:""mail from: user1@mydomain.com" - (with ":") - no email address on my server. Then server reply: 250 OK..This is really weird! I tried with all my plesk server, this bug still effected.Click to expand...
We cant' modify any files of my website in WordPress that contain user www-data.
How can you can change the permissions to this user (www-data).
The version is Plesk 12.0.18 Actualización #44
We have also Plesk 11.5 with WordPress and never has www-data user.
1 have to create a new user, for example "webmaster" with ftp access, plesk access and database access.
My problem is: after i make all, this user can see all database for this domain. Can i show him only 1 database (him database)? If yes, how i can do?
I try to change a mysql user password, but I get an error message:
Fehler: attribute name is invalid: status
Search for related Knowledge Base articles
I'm running12.0.18 Update Nr. 39