Exim: User Unknown (domain Forward)
One of my clients has 2 accounts:
- foo.com, with a mail account info@foo.com.
- bar.com, with domain forwarding to foo.com.
Sending an email message to info@foo.com works.
Sending an email message to info@bar.com doesn't work. When using the ZoneEdit SMTP test utility I get the following error message:
Code:
> RCPT TO:<info@bar.com>
< 550 5.1.1 User unknown: info@bar.com
I checked "/etc/vdomainaliases/bar.com" and "/etc/localdomains", they are configured properly.
Any suggestions?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Rkhunter :: 'not Found' In Local Files And Unknown For Exim And Php 5.2.5
how to fix rkhunter from; 'not found' in local files and unknown for exim and php 5.2.5. System checks * Allround tests Checking hostname... Found. Hostname is Checking for passwordless user accounts... OK Checking for differences in user accounts... OK. No changes. Checking for differences in user groups... OK. No changes. Checking boot.local/rc.local file... - /etc/rc.local [ OK ] - /etc/rc.d/rc.local [ OK ] - /usr/local/etc/rc.local [ Not found ] - /usr/local/etc/rc.d/rc.local [ Not found ] - /etc/conf.d/local.start [ Not found ] - /etc/init.d/boot.local [ Not found ] * Application version scan - Exim MTA 4.68 [ Unknown ] - GnuPG 1.2.6 [ Old or patched version ] - Apache [unknown] [ OK ] - Bind DNS 9.2.4 [ OK ] - OpenSSL 0.9.7a [ Old or patched version ] - PHP 5.2.5 [ Unknown ] - PHP 5.2.5 [ Unknown ] - Procmail MTA 3.22 [ OK ] - OpenSSH 3.9p1 [ OK ]
View Replies!
View Related
Forward Domain To Static IP
i have a domain hosted at eNom which i would like to point to my FTP server which is running on my box at home. I have a static IP, and BulletProof FTP server installed. Now im just unclear how i can have www.mydomain.com point to 212.12.34.56:21.
View Replies!
View Related
Domain Name Redirecting To Unknown Website
I came across a problematic situation today. Our client pmb.com.my has complained that their domain, when accessed from search engines will go to another site, not theirs. So, perhaps you guys can try this out. 1. Type the URL on the browser directly: [url] You'll get the real site. 2. Try searching for "pmb malaysia" on Google: [url] 3. You should see a normal listing for the site as the 1st result. Try clicking that link. 4. In our checks, it will go to a landing page (black bankground), and will redirect to an adult site. 5. You get this landing page too when you click the link to the site in step 1. Appreciate if more people can try this out and post your findings here. I've contacted the RZ (site hosted there), and they said it is an issue with Google's cache. Not sure I buy that.
View Replies!
View Related
Can Your Hosting Address Be Seen When You Forward A Domain?
For example, if I forward my business domain abcproducts.com to my domain where I have my hosting, myname.com, is it possible for people to see where my business domain is forwarding to. Basically, I am doing a business website, but I don't want anyone to be able to see that it actually is forwarding to a folder on my main myname.com where I have my hosting. I am masking it, so it will only show abcproducts.com, but I am wondering if even the "tech saavy" has tools to figure this out. I just don't want anyone to be able to see this. Like, I know how sites like DNSreport.com show all kinds of stuff on the domain. Is there something like this that people can use to see if domains forward?
View Replies!
View Related
Forward Domain To Multiple IPs
Forward domain to multiple IPs I have a domain setup on my Plesk 8.6.0 powered webserver which is being forwarded to a specific IP provided by my costumer, all DNS zone records are inserted accordingly and everything works fine. Due to a problem with the ISP that provides the fixed IP on my costumer’s server he now wants to get a second IP from a different ISP, for the same webserver, to function as a secondary route onto his server .....
View Replies!
View Related
Can I Forward My Domain While DNS Propagate?
I have a yahoo domain and I plan to move it to a new host. i know it may take 24-48 hours for the new DNS to propagate. my question is. Is it possible to forward my domain while DNS is being propagated? So my user will be taken to another website while dns is propagated. I have access to domain forwarding as well as DNS change through my yahoo domain control panel Thank you to all.
View Replies!
View Related
Forward A Domain (incl. Subdirectories/subdomains) To The Same URL
Forwarding a domain (incl. subdirectories/subdomains) to the same URL I'm looking for a provider which can offer a service similar to mydomain.com, I should be able to add an unlimited number of domains to forward on external urls in a way which should point anything-you-digit.myname.com and myname.com/anything-you-digit to the same destination url If the service might also allow to add title, keywords and description for each domain, this would be even better but not required. MyDomain can offer all this but there's a fee for each added domain while we'd prefer paying a monthly fee for a single hosting where adding multiple domains.
View Replies!
View Related
Exim/Cpanel No Such User Here
I'm having an issue with email generated from a website contact form. The email is being sent from the website via php. The issue is that the email address that it is being sent to is a domain/website that is also on cpanel. It is trying to deliver it to a local account, but the email is acutally on a third party system outside of cpanel. Does anyone know anyway for exim to not try and deliver locally?
View Replies!
View Related
Only Domain Reg, Email Forward And Url Redirect Wanted
I need a company to register my domain, and then forward emails and urls to my actual site that is somewhere else. I don't need any actual web hosting or email pop (at the moment). My main requirement is reliability. The company I currently use bounces some email to me and forwards other email to a black hole. They're also not replying to my mail, so it's time to leave. BTW, this is a company that has generally excellent reviews.
View Replies!
View Related
Warning: Unknown: Failed To Open Stream: Permission Denied In Unknown On Line
I have set up my Virtual Private Server and uploaded all my site's files to /var/www folder. Before that, there was an old simple 'index.html' file Code: <html> <head> <title>INDEX</title> </head> <body> <h1>IT WORKS!!!!</h1> </body> </html> and when I typed the address www.mydomain.com it displayed correctly. Then I deleted this html and uploaded my files through FTP and now the browser says : Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
View Replies!
View Related
CPanel + Exim + User Level Filtering
whether our webhost has their configuration messed up, or if this is not genuinely possible with cpanel + exim + shared hosting. Our email server is hosted with the web host, and what we want to do is to not allow certain users to be able to receive (And send) outgoing email to non-local domains e.g. they should only be able send and receive within our hosted domain, @mydomain.com . Now, we've tried doing this using cpanel's user level filters and have setup the following: Rules: If Field To does not contain @mydomain.com OR If Field From does not contain @mydomain.com Action: Fail with message. We've tested these filters using combinations and they seem to be working as far as we can see on cpanel (it has the filter testing feature) Now this works for people sending emails into our domain e.g. someone from hotmail tries sending emails to a user, and it bounces back. But people from inside the domain can send emails to other domains even when they give valid results on the cpanel filter tester.
View Replies!
View Related
Exim Outbound Relay Per Domain
I have been searching for a solution to a problem that shouldn't exist but it does. Background: I have a customer on a UK server who sends emails to 500+ recipients on a monthly basis, and all but 3 emails are delivered.... The 3 that don't go, bounce after 3 days (as per the exim setup) The 3 recipient domain's that reject don't seem to accept email from UK/European ip's and I have tried to send them emails from 4 different networks and still they bounce. I have even tried to contact them via gmail, and still not heard back. Proposed solution: I want to be able to send email for that 1 domain to a Postfix Relay I have in the US. Question: How do I achieve this within Exim (a Cpanel Server). I have found that so far its to do with the Router Configuration section within the Cpanel Exim setup, but I cannot seem to find an example of what and where i need to change the config... Can anyone provide an example?
View Replies!
View Related
Sub Domain On Different Server Exim Unroutable Address - WHM/cPanel
I have two servers running cPanel/WHM, with BIND and Exim. I have my main domain running on one server (gizmo.mywebhost.net) and wish to host a seperate helpdesk on a subdomain support.mydomain.com (on a second server, stripe.mywebhost.net). The subdomain mail account test@support.mydomain.com works fine with hotmail, i can send and reveive between my stripe.mywebhost.net server and hotmail without any issue. The problem is when i try and send mails from accounts hosted on gizmo.mywebhost.net, to the subdomain server stripe.mywebhost.net, i get the following unroutable address error fired back by the local exim process: This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: test@support.mydomain.com Unrouteable address ------ This is a copy of the message, including all the headers. ------ ......
View Replies!
View Related
Exim - Mail Filter, Blind Copy All Domain Emails
I have Exim install on my server, I have a few filters setup. I have several domains on the same server. What I want to be able to do is blind copy all emails SENT and RECEIVED from *@domain1.com delivered to backup@backup.com Here is my filter that copies all incoming mail, (THIS WORKS 100%) PHP Code: if error_message then finish endif if $header_to: contains "@domain1.com" then unseen deliver "backup@backup.com" endif Now this filter does NOT work, I want it to blind copy all emails sent from *@domain1.com PHP Code: if $sender_address contains "@domain1.com" then unseen deliver "backup@backup.com" endif I have 1 outgoing mail filer working, however it is for a specific email address, here it is.... PHP Code: if $sender_address is "user1@domain1.com" then unseen deliver "backup@backup.com" endif
View Replies!
View Related
Limiting Cpu/memory Of A Single User/domain In Whm
i've been researching this but can't seem to find a decent solution. basically trying to limit the cpu usage of a single domain, or limit accesses per hour if that's possible? i tried adding an entry in /etc/security/limits.conf which restricts numproc to 2 and then down to 1, but it doens't seem to make any impact on the load. load of the server drops from about 1.5-2 down to 0.02 when this single site is suspended, and i can't have it run wild. ideally would like a message that says something along the lines of server is too busy... trying again in 5 seconds or something along those lines?
View Replies!
View Related
CAC/Smartcard User Info Not Accepted, Must Use Domain Usr/pwd Instead For SSL Site
Having an issue with random individuals trying to access an intranet site with a security certificate. Most users are able to simply select their Smartcard/CAC certificate, enter the pin number and then are granted access to the site's pages. However, random individuals enter their pin and then are immediately re-prompted by the IE alert dialogue to enter their domain username and password. If they don't enter their network domain username and MS password, then they receive a 401.1 Unauthorized. I am confused as to why these certain users (who are selecting the same certificates as the successful ones) are being prompted for their domain name/pwd. Furthermore, they're able to access other sites which require a CAC to get past the security certificate. Possible that a user token is unable to be established via a CAC for the particular site, but not sure why. Since these users are getting a 401.1, then somehow their identity associated with their CAC credentials is not validating. In IIS: Anonymous users are not allowed (unchecked). 128-bit encryption is required with SSL. Integrated Windows Authentication is checked. Accepting client certificates In the site's web.config file all users are allowed and only anonymous are denied. Developed in asp.net 3.5 We have tried to reproduce the problem in testing and development environments, but have fortunately/unfortunately been unable to duplicate this issue. This furthermore eludes to an issue that might be isolated to the production server, users access to it, and/or the certificate that is applied to that SSL website on that server. The exact same setup is present on the development box without any issues at all, indicating to me that the problem resides on the production server's ability to properly receive/handle CAC information from those individuals or that something funky is going on with the way the security certificate is relating to the client's CAC x.509 certificate. A little more information that may be of use: the browser prompt that initially asks for the CAC has nothing to do with the code of the site, but rather is enabled by applying the security certificate to a site in IIS; thus indicating to me that there is something written into the certificate that looks for client certificates tied to the ActivClient agent via the browser? The violating users' cards work on all other applications and even on SSL sites on other servers that bring up a CAC prompt. I believe we have confirmed that the certificates associated with their cards and their IE browsers are valid through 2015 (or longer in some cases), and are the same in nature (x509 certificate from the card)... and issuer is being consistently selected as DOD Email CA-15 (though the regular DOD CA-15 works as well). Again, maybe something with the fact that it's isolated to one production server, something with the SSL cert. on that url or user access? Then again, I probably have no idea what i'm talking about, just throwing a bone here to see if anyone has had the same issue or has any ideas.
View Replies!
View Related
Exim - How To Remove Rbl Lists From Exim.conf
I am having issues in receieving emails. For some reason, the rbl lists I had setup are causing the server to reject emails (retry - timeout). So, I need to take this rbl list completely. How can I do that? exim.conf is locked and using the advanced editor is no fun even though I tried it putting the dnslists without the rbl causing the problem.
View Replies!
View Related
40 GB Of Unknown Folder
I host a website on a windows server and once in a while, i check all the root folders to find a folder that holds 40GB of folder in a folder in a folder... (i never get to the actual files) Is there a way to prevent this?
View Replies!
View Related
What Are Those 'unknown' Browsers
I was reviewing my cPanel awStats today. The brower stats looked something like this: Firefox 42.9 % MS Internet Explorer 21 % Mozilla 17.3 % Unknown 5.8 % K-Meleon 5.4 % Safari 3.7 % Opera 3.1 % Netscape 0.1 % BonEcho (Firefox 2.0 development) 0.1 % Anyone care to venture a guess as to what the 'unknown' browsers might be?
View Replies!
View Related
Unknown Filesize
The thing is that my sysadmin told me that he get filesize and eta when downloading a file from my server while all of my user and myself get unknown flesize and no eta. got Web Server apache2handler centos 5.1 64bit
View Replies!
View Related
Ip Forward
let's say I'm part of a LAN and i get my public IP through a PPPoE but i also have a wireless router and another station on which I wish to have linux. On that linux machine I will have anther public IP which is not from the same class. What to do in order to world wide see my server machine(the one with linux and IP not from the same class)
View Replies!
View Related
Unknown Iptables Module
I've bought a basic unmanaged VPS, purely to learn things from it. The best way to learn imo is to hammer the hell out of things, break it, then try to fix it. Anyway, I think I'm part way there, pretty sure I've broken something When I start the consoleSSH I get this at the top: Warning: Unknown iptable module: xt_NFQUEUE, skipped Warning: Unknown iptable module: xt_mark"IPTABLES="ipt_REJECT, skipped Warning: Unknown iptable module: xt_NFQUEUE, skipped Warning: Unknown iptable module: xt_mark"IPTABLES="ipt_REJECT, skipped Warning: Unknown iptable module: xt_NFQUEUE, skipped Warning: Unknown iptable module: xt_mark, skipped Any ideas what's causing it and how I can fix it? ..............
View Replies!
View Related
Mails With Unknown Signature
When I am sending mails through my Outlook, the mails are being delivered with an unknown signature as below: ADVERTISING -------------------------------------------- <a href=[url] Buy Viagra, Cialis, Levitra, Propecia, Champix, Tamiflu, Xenical, Reductil, Intrinsa, <br> from The Best Online Pharmacy! FDA Approved. Low pricing, discounts, <br> flawless customer support. New discounts and special offers ! <br> </a> [url] -------------------------------------------- Eventhough, I did not setup any signatures. Plesk server with spamguardian running.
View Replies!
View Related
Unknown Space Consumption
my friend has an un-managed VPS plan in kloxo-hypervm mode yesterday the stats showed in hypervm as the space was over used, so I personally deleted the processed stats which cleared around 20gb space, again today the space is totally consumed, I don't know why its happening and have no clue where are the other locations where the space could have been consumed i.e similar to location of logs or any other specs which could have been consuming space unknown space consumption - very high no idea how! its actually an image hosting site and I noted that not many pics and not much space was consumed in the pics uploaded in the last 24hrs but this really puzzles and troubles me as I am currently tracking my friend's VPS, please help me sort this out problem and keep my head high before my friend
View Replies!
View Related
Unknown File Size
i think it's an apache problem, but whenever i download something from my server via http, i get unknown file size when downloading. it's not a big problem, but it's kind of annoying. does anyone know why it's doing this?
View Replies!
View Related
Forward IP Port?
I would like to know on how to forward specific IP with port to localhost or any IP by using iptables ? For example i would like to forward for port 25 from IP A to IP B, Currently i'm doing a test with my firewall and i'm very blur with iptables thingy.
View Replies!
View Related
Nameservers Forward?
hello i really rely on your expertise guys please help me! a cpanel server A has some domains on host 1 a new cpanel server B is set ready for migration on host B. the greek registrar i use, by accident (As they say) switched ips for my nameservers from A to B and the migration has not been done!!!! can i set up a record or something on server B to forward all traffic back to server A ??????? Sorry i'm not a network expert. That's why i'm here thanks simos
View Replies!
View Related
Forward Port 80
I'm hostnig my website at home, and I think my router reset itself. I was wondering how to reforward port 80. I have a netgear router. This is teh port forwarding pagfe, of my router. The other is my ipconfig page.
View Replies!
View Related
Iptables: Unknown Error 4294967295
I have recently configured my nodes IPTables but its now throwing out the following error: iptables: Unknown error 4294967295 I have followed the instructions here http://kb.swsoft.com/article_130_875_en.html Node software: CentOS and HyperVM/OpenVZ
View Replies!
View Related
530 Error Unknown Ip Address
I have just taken hosting from godaddy. i have taken dedicated website hosting. But my ftp are working in my office filezilla and not at home. Its giving 530 error, unknown ip address. I am using file zilla in office and at home.
View Replies!
View Related
Apace Error_log Unknown Erros
Lately our VPS has needed to be restarted frequently (1-2x daily for the past 5 or so days). I have pulled our eror_log file and pasted below the last several days. I am hoping someone can take a look at it and point me in the right direction. Because of limitations, I cannot post anything with urls, but the two errors that have been occuring most frequently are below Code: [Mon Mar 3 07:37:22 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:32 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:42 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:52 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:38:02 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:38:12 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Wed Mar 5 07:44:02 2008] [error] Bad pid (15524) in scoreboard slot 44 [Wed Mar 5 07:44:02 2008] [error] Bad pid (3750) in scoreboard slot 46 [Wed Mar 5 07:44:02 2008] [error] Bad pid (3751) in scoreboard slot 47
View Replies!
View Related
/etc/named.conf:87: Unknown Option 'e'
I have the following problem: When i try to restart the nameserver service i get the following error: # service named restart Stopping named: [ OK ] Starting named: Error in named configuration: /etc/named.conf:87: unknown option 'e' /etc/named.conf:120: unexpected end of input [FAILED] my named.conf as follows: include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { "rndc-key"; }; }; options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ query-source port 53; // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ }; logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named). * By default, SELinux policy does not allow named to modify the /var/named directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; }; // All BIND 9 zones are in a "view", which allow different zones to be served // to different types of client addresses, and for options to be set for groups // of zones. // // By default, if named.conf contains no "view" clauses, all zones are in the // "default" view, which matches all clients. // // If named.conf contains any "view" clause, then all zones MUST be in a view; // so it is recommended to start off using views to avoid having to restructure // your configuration files in the future. view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritativ zone "smpl.splinteredmedia.net" { type master; file "/var/named/smpl.splinteredmedia.net.db"; }; e" internal zones, and would probably // also be included in the "localhost_resolver" view above : }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers // all views must contain the root hints zone: zone "." IN { type hint; file "/var/named/named.ca"; }; // These are your "authoritative" external zones, and would probably // contain entries for just your web and mail servers: // BEGIN external zone entries }; z zone "smpl.splinteredmedia.net" { type master; file "/var/named/smpl.splinteredmedia.net.db"; }; I have cPanel installed on a CentOS 5.1 VPS
View Replies!
View Related
Iptables: Unknown Error 18446744073709551615
Iptables have problem on all vps. when we started csf firewall, we have got this error on all vps: iptables: Unknown error 18446744073709551615 and then iptables blocked all connection. i know that error is for xt_tcpudp module. please tell me how to load this module on all vps? also i have a full access to node server. OS Version: CentOS 5.2 IPtables Version: iptables v1.3.5 Kernel: 2.6.18-028stab053.17 #1 SMP Mon Jun 9 20:42:43 MSD 2008 x86_64 x86_64 x86_64 GNU/Linux
View Replies!
View Related
CSF: Iptables Unknown Arg
I have something weird going on with CSF on a new server. When starting the firewall I get this: Quote: lushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Restarting bandmin acctboth chains for cPanel ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0 iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_IN Blocked* ' LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_OUT Blocked* ' LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_IN Blocked* ' LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_OUT Blocked* ' LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_IN Blocked* ' LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_OUT Blocked* ' LOG all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *BLOCK_LIST* ' iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. INVDROP all opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 state INVALID INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x00 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x3F INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x03/0x03 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x06/0x06 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x05/0x05 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x11/0x01 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x18/0x08 INVDROP tcp opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x30/0x20 INVDROP all opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 state INVALID INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x00 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x3F/0x3F INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x03/0x03 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x06/0x06 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x05/0x05 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x11/0x01 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x18/0x08 INVDROP tcp opt -- in * out eth+ 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x30/0x20 iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. LOGDROPIN all opt -- in eth+ out * 64.58.165.126 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out eth+ 0.0.0.0/0 -> 64.58.165.126 LOGDROPIN all opt -- in eth+ out * 216.105.216.5 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out eth+ 0.0.0.0/0 -> 216.105.216.5 LOGDROPIN all opt -- in eth+ out * 64.251.10.133 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out eth+ 0.0.0.0/0 -> 64.251.10.133 LOGDROPIN all opt -- in eth+ out * 89.149.240.26 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out eth+ 0.0.0.0/0 -> 89.149.240.26 LOGDROPIN all opt -- in eth+ out * 195.87.225.72 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out eth+ 0.0.0.0/0 -> 195.87.225.72 BLOCKDROP ... ... SPAMHAUS all opt -- in eth+ out * 0.0.0.0/0 -> 0.0.0.0/0 iptables v1.3.5: Unknown arg `-j' Try `iptables -h' or 'iptables --help' for more information. Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `BLOCKDROP' Flushing chain `DSHIELD' Flushing chain `INVDROP' Flushing chain `LOGDROPIN' Flushing chain `LOGDROPOUT' Flushing chain `SPAMHAUS' Flushing chain `acctboth' Deleting chain `BLOCKDROP' Deleting chain `DSHIELD' Deleting chain `INVDROP' Deleting chain `LOGDROPIN' Deleting chain `LOGDROPOUT' Deleting chain `SPAMHAUS' Deleting chain `acctboth' Error: iptables command [/sbin/iptables -v -I OUTPUT -p tcp --dport 25 -j ] failed, at line 544 Unknown arg `-j' ? I've been Google'ing, searched WHT and the CSF forums but can't find a solution...
View Replies!
View Related
Email Auto Forward
I have signed up for hostgators webhosting. Upon setting up, I found out that outgoing mails from any email addresses from my domain name cannot be copied to another email account. I've tried scripting on the client software (e.g)outlook. it works. but then again, it only applies on the client side if the scripted client is present. this would not work if the email is sent from the web based login. is there a work around for it? If there isn't, does any one know of any webhosting co. that allows that? Situation is, my current host does allow it. Due to small amount of disk space allocated, reliability of the service, technical support and cost, we therefore have decided to switch to another host.
View Replies!
View Related
Postfix - Forward Question
I'm using Postfix as my mail agent. I was wondering how to forward incoming emails to a script. I did a search in google and couldn't find anything relevant only this. create a alias like this. email@example.com: "| php -q /home/user/full/path/to/script.php" But is not working not forward nothing. I have tried everything but nothing works and the logs not show me any errors.
View Replies!
View Related
Subdomain Forward To Other Host
i have been stuck in this situation for more than a week... the situation on my side is this: <-- i have a domain at godaddy, and using godaddy windows hosting.. i have a website in ASP.NET, and i want to make a subdomain for my forum suppose: forum.mydomain.com and forward it to other host on cpanel... --> Other side: <-- my friend has bought reseller hosting and have created an account for me with the name of mydomain.com. and the server IP is x.x.x.123 --> i logged in to my account in cpanel and created a subdomain named "forum" then i created the subdomain on godaddy and pointed the A record of this subdomain to x.x.x.123 now when i open forum.mydomain.com.....it displays error page... (i have kept a simple index.html file in public_html) any solution to this problem? i need steps to resolve this problem and what configurations i need to do on godaddy + cpanel manager....
View Replies!
View Related
|
TRACKER
