Plesk 11.x / Linux :: QMAIL SSL Certificate

Oct 15, 2014

I have issue with qmail server. I want to update ssl certificate and for this i have replaced older servercert.pem with new servercert.pem file in /var / qmail/ control/. and restart service of qmail using qmailctl restart.But after updating this certificate my web browser still showing older certificate details.

View 1 Replies


ADVERTISEMENT

Plesk 11.x / Linux :: How Qmail Is Configured

Jul 22, 2015

I am a new user of Plesk 11.5.30 struggling to understand how qmail is configured.

I intend to install ezmlm to work with qmail but the installation guide assumes that the qmail installation is set up per LWQ (Life with qmail - see URL....

For example the following are quotes from LWQ:All of qmail's system configuration files, with the exception of the .qmail files in ~alias, reside in /var/qmail/control.A series of configuration files resides under /var/qmail/users.

The qmail sendmail, which is normally in /var/qmail/bin/sendmail, usually replaces .None of these directories exist. So where are all these configuration entities?

View 13 Replies View Related

Plesk 12.x / Linux :: Can't Switch From Qmail To Postfix

Jul 21, 2015

I am unable to switch from qmail to postfix via the control panel. It opens a new window that just hangs and never loads. While waiting for it to load, I see these 2 processes running..

root 25108 0.1 0.0 133972 20604 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser
root 25109 0.0 0.0 104952 3032 ? S 21:58 0:00 /var/cache/parallels_installer/parallels_installer_CentOS_6_x86_64 --service-mode=components --enable-xml-output --ssl-cert /usr/local/psa/admin/conf/httpsd.pem --branch release,stable --web-interface --with-ssl --disable-browser

But after waiting 20 minutes, the browser never loaded and the two proceses remain. So I killed both processes and removed /tmp/psa-installer.lock and started again. The same thing happened.

Is there a way to fix this? If not, is there an easy way to switch MTAs from the command line?

View 4 Replies View Related

Plesk 12.x / Linux :: Qmail Fails Due To Dh Key Length

Jul 11, 2015

I have been seeing these in my log and received complaints from customers not able to get their mail out. These messages just stay in the queue and go no where.

what they are successfully using as a tlsserverciphers and tlsclientciphers? Maybe it the dh key being too small. How can this be fixed on Qmail?

qmail: 1436646171.830486 delivery 6: deferral: TLS_connect_failed:_error:14082174:SSL_routines:SSL3_CHECK_CERT_AND_ALGORITHM:dh_key_too_small;_connected_to_170.49.86.238.

View 2 Replies View Related

Plesk 11.x / Linux :: How To Add Additional SMTP Port To Qmail

May 13, 2014

I want to add a new port for SMTP (1024) as a client's ISP block 25, 587 and 2525. I tried following this guide: [URL] ... but it doesn't work with Parallels Plesk Panel 11.5 ...

How to add an additional SMTP port to Qmail in Plesk 11.5?

View 1 Replies View Related

Plesk 11.x / Linux :: Slow SMTP Response From Qmail

Jun 16, 2015

We are seeing intermittent slow responses from SMTP on a RHEL6 server running Qmail on Plesk 11.5. The response is being measured from a remote Zabbix server.

The response time seems to be slow (>10s) for a period of 2-3 minutes and then returns to normal (<1s). All other services continue to be ok during the period of slowness.

The server_args line in /etc/xinetd.d/smtp_psa already contains "-Rt0" and all the DNS servers in /etc/resolv.conf are resolving properly.

From looking at the maillog file the server was receiving about 35 SMTP connections a minute at the time of the slowdown. We have the server configured to use 2 x RBL's.

I wonder if we are hitting a limit on the maximum amount of SMTP connections. The file /var/qmail/control/concurrencyincoming does not exist so, according to the Qmail manual, there shouldn't be a limit on the number of incoming SMTP connections.

View 9 Replies View Related

Plesk 12.x / Linux :: Postfix - Qmail Permission Denied

Feb 12, 2015

Mail isn't leaving the queue, it's returning this error

Feb 12 23:12:01 XXXX postfix-local[64360]: System error .qmail: Permission denied
Feb 12 23:12:01 XXXX postfix-local[64360]: Wrong permissions for .qmail

All the files within /var/qmail/ are set to the user and group "popuser", and have the nessacery rwx permissions for the user/group.

The OS is CentOS.

View 5 Replies View Related

Plesk 11.x / Linux :: Qmail Not Working - SMTP Isn't Responding

May 26, 2014

Just got a strange problem on my plesk server. (11.0.9)

Qmail isn't working...

In Home>Tools & Settings>Services management SMTP "Server (QMail)" is stoppped.

When I try to start it, it say "Information: Please allow for some time for the service to start." but never starts...

In command line i try to restart it with "service qmail restart" and it says "OK" also if i run "service qmail status" it says "qmail-send (pid 2880) is running..."

but, it really doesn't work... queue is getting bigger and smtp isnt responding...!

View 4 Replies View Related

Plesk 11.x / Linux :: Qmail And SSL For Specific Mail Domain

May 27, 2015

I'm using Plesk 11.5.50 CentOS 6.5 64bit with Qmail. I have installed a SSL certificate on mail server "mail.company.tld" and is running successfully with smtp/pop3/imap4 daemon. Every user agent uses "mail.company.tld" for smtp/pop3/imap4. The qmail name is "mail.company.tld" (file me). The server has about 300 domains and 1000 accounts.

Now we want to add a new SSL certificate, called "mail.newcompany.tld", and use it only for certain domains. I would like to know if is possible to use the new SSL "mail.newcompany.tld" for a specific mail domain without using the old SSL "mail.company.tld" that isn't expired yet. From Plesk Panel I haven't found a section for using the SSL for a specific mail domain.

View 1 Replies View Related

Plesk 11.x / Linux :: Qmail Email Messages Always In Queue

Nov 17, 2014

I have a server(godaddy) with plesk. It was all working well till 8 - 10 days ago. I didnt notice it one week later where I started receiving a lot of failed mail notices. Then on investigation, there were more then 50K spam mails in the mail queue and the mails that were supposed to be sent(registration, forgot password) were also held up in the queue. I found the source of the spam and fixed that.

Also I cleared the mail-queue. Now when I try to send out a test message, it still gets held up in the mail queue. But I can send a test mail to the same domain (info@mydomain.com). All new user registration mails are also held up and this is greatly affecting the site.

View 1 Replies View Related

Plesk 11.x / Linux :: Reinstall Qmail After Spam Attack

May 22, 2014

I need reinstall qmail after spam atack and follows the post.URL....It says:

rpm -Uvh --force psa-qmail

but my system return an error message..error: opening psa-qmail failed: it does not existe file or directory (error: la apertura de psa-qmail falló: No existe el fichero o el directorio)

rpm -q psa-qmail

return

psa-qmail-1.03-cos5.build1013120126.11

And my system is CentOS

View 3 Replies View Related

Plesk 11.x / Linux :: Qmail Delivery From Certain Senders Takes Up To 10 Hours

May 9, 2014

I am running CentOS 5.10 (Final) with Plesk 11.5.30 Update #44 and since a few days have the strangest problem with incoming emails from certain hosts.

The email from known senders produces a relaylock message like:

/var/qmail/bin/relaylock [12345]: mail from 80.80.80.80:59595 (mail.hostname.com)

From what I was able to gather this is regular behaviour with plesk and qmail, indicating that the senders' mailserver has made contact.

Then nothing happens. For hours. 7-10 to be exact. Then the mail is being processed and delivered.

View 2 Replies View Related

Plesk 12.x / Linux :: Domains Not Showing - Qmail Does Not React To Panel

Sep 15, 2014

We installed a new VPS with Centos and Plesk 12.

Domains are simply not showing in the controlpanel. We can see the subscriptions but its empty under the button 'Domains'. Newly created sites as well as migrated sites do not show.

Before we created or migrated a site to the server we changed psa.conf HTTPD_VHOSTS_D /home/httpd/vhosts
This is a legacy from our old servers and never has been a problem. I suppose this is not related, but just thought I should mention it.

The second problem with this server is that when we toggle the mailservice in 'Services management' the button reacts but does not change the state of qmail. It just keeps running. What can be wrong with this fresh installation?

View 1 Replies View Related

Plesk 11.x / Linux :: PTR Record And RDNS - Qmail Delivery Failure

Jun 23, 2014

I have a PTR record and RDNS works for me but when i want sending email to this server : 62.152.169.25 error occurs and mail undelivery received.

qmail: 1403506829.587606 delivery 2978: failure: 62.152.169.25_does_not_like_recipient./Remote_host_said:_550_Invalid_RDNS_entry_for_144.76.245.38/Giving_up_on_62.152.169.25./

View 3 Replies View Related

Plesk 11.x / Linux :: SMTP Service (qmail) Stops Responding On Port 25

May 19, 2015

Since 15.05.2015 smtp experiencing problems.

Smtp service (qmail) stops responding on port 25:
# time telnet localhost 25
Trying 127.0.0.1...
quit
quit
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
quit
quit
Connection closed by foreign host.

real 4m10.629s
user 0m0.000s
sys 0m0.002s

After server restart or sometimes apache stop or ixnetd restart its responding for a some random time, and then again it stops to respond. Plesk panel show it as stopped but qmail itself running in memory, and does other its work, it just stops responding at port 25, or responds with a huge delay.

I've tried change it to postfix, reconfigured with mchk, repaired with repair.sh -r, disabled and uninstalled parallels antivirus, antispam, dnsbl, disabled firewall, disabled smtp lock. Checked apache, dns. Enabled submission port which works when 25 port doesnt, but i need working 25 port.

Nothing solves problem, its just stops responding after some random time. There is no errors on maillog.

I think this problem occured after recent plesk microupdate, because i didn't do anything to server configuration in last months.

This article says it might be dnsbl [URL] .... but it disabled(from plesk panel) on my server, maybe there is way to focefully kill any relation to dnsbl?

Plesk info:
OS Red Hat Enterprise Linux Server 5.9 (Tikanga)
Panel version 11.5.30 Update #50, last updated at May 18, 2015 05:21 PM
The system is up-to-date; last checked at May 17, 2015 10:56 PM

update: xinetd restart is definitely brings smtp alive, but it goes off after random period of time (5min ~ couple hours)

View 1 Replies View Related

Plesk 11.x / Linux :: Qmail - Emails Not Delivered To Mailboxes / Stay In Queue

May 26, 2014

I'm having a hard time figuring why me emails are not delivered to mailboxes.

A bit of context:
OS: Ubuntu 12
Plesk pannel: 11.5

This server was supposed to be a new server (upgrade) from a previous who was working correctly (Also Linux with Plesk but both older versions).

After new server installed and websited up and running, I decided to create mailboxes and then copied all mailboxes (including emails and folders) to this new server.

First issue I got was i could not connect, until I figure out permissions were incorrect (for root after copy) and fixed it to be accessible by "popuser" (each user to access his mailbox).

Now i can connect, but new emails stay on qmail and can't be delivered to mailboxes.

Even after I have deleted the emalboxes and recreate them (now new emails are being delivered) all those emails in the queue can't be delivered.

I forced queue flush with "postqueue -f" but I get errors on the log:

(temporary failure. Command output: .qmail has prog delivery but has x bit set. (#4.7.0) 4.2.1 Message can not be delivered at this time )...

Which user should i give permissions (if that is the case) so tha both popuser (email user) and qmail/postfix can write on the mailboxes and deliver messages?

View 4 Replies View Related

Plesk 12.x / Linux :: How To Put Certificate With Domain

Oct 11, 2014

I've have a problem with a server : we have create as usual certificate with Tools > SSL certificates.

When we want to put certificate with the domain, we don"t have the "Secure your sites" menu in the "websites and domains" sub category.

Why ? How can i activate the certificate with the domain ?

View 5 Replies View Related

Plesk 12.x / Linux :: Can't Remove Old Certificate

Sep 26, 2014

I installed a new ssl certificate, changed it to be default and secure Plesk, switched the IP to use it. Now I wanted to remove the old one but it shows me that there is still one usage of this cert and I can't remove it. But how can I find what is using it?

View 5 Replies View Related

Plesk 11.x / Linux :: Can't Remove SSL Certificate From IP

Nov 3, 2014

I tried to remove the ssl certificate but although I have removed it from the IP I'm getting an error that it is still assigned to it. The solution in [URL] .... didn't work cause the Certificate field is grey out in my case.

View 1 Replies View Related

Plesk 12.x / Linux :: Embed SSL Certificate For Mailman

Jul 25, 2015

I want to embed a SSL certificate for mailman permanently in the server.conf file.

For Roundcube I've found a manual: [URL] .... (in German), but not for Mailman.

View 5 Replies View Related

Plesk 12.x / Linux :: Replacing Default Certificate

Feb 24, 2015

I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.

I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?

I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?

View 3 Replies View Related

Plesk 11.x / Linux :: SSL Certificate For Mail Server

Oct 27, 2014

I’ve read the documentations of (PBAS, Plesk, and Securing Websites).how to add SSL Certificate to our Webmail? In addition, I need to know, how to request CSR key and install SSL for our mail server in order for us to protect our emails and to use the SSL Protocol in mail softwares such as Outlook? I will explain the scenario in details:

1- We have (www.example.com) which is our "Plesk Server hostname" and a subscription in our "Plesk Server".
2- We have (pbas.example.com) which is our "PBAS Server hostname" and it's not a subscription in our "Plesk Server".
3- We have (account.example.com) which is a "Subscription" in our "Plesk Server".

Here are the DNS records of our domain and subdomains:
Host-Type-Data
-A-192.168.1.30
www-A-192.168.1.30
mail-A-192.168.1.30
pbas-A-192.168.1.31
account-A-192.168.1.32
-MX-example.com.

how to generate CSR key for each domain/subdomain and how to install the SSL for it? Our "Plesk" is 11.5 and installed on CentOS 6.4.

View 8 Replies View Related

Plesk 12.x / Linux :: Associating SSL Certificate To A Site Using CLI

May 27, 2015

When using `plesk bin --update domain.example.com -certificate-name 'certificate'`, Plesk always returns `Unable to find certificate`, I have verified the certificate exists using `plesk bin certificate -l -admin` and the spelling of the certificate name is correct. I can use the WebUI to associate the certificate to the site and have verified it works, however I need to automate this task.

Also, the online documentation for the `plesk bin site` command does not mention the `-certificate-name` option, however it is listed when running `plesk bin site -h`.

The documentation missing the information is found here: [URL] ....

View 2 Replies View Related

Plesk 12.x / Linux :: How To Add Ssl Certificate To Email Server

Jan 20, 2015

I'm running Parallels Plesk 12 on Debian GNU/Linux 7.6...I have a valid certificate for my mail server : mail.mydomain.tld but I don't find the place in Plesk 12 to put it.

View 2 Replies View Related

Plesk 12.x / Linux :: Add New Certificate To All Virtual Hosts

Feb 13, 2015

I installed a new certificate, made it default, assigned it to the shared ip address and made the plesk panel use it.

The problem is we have 200 virtual hosts using the old certificate. Is there a way to reconfigure all those domains easily.

View 13 Replies View Related

Plesk 12.x / Linux :: Changing Default Certificate?

Sep 30, 2014

My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail

What I want:
I have an old sha1 certificate and I would change this for the whole server.

What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).

Then I set the new certificate as standard certificate and pressed the "secure pannel" button.

After that the panel uses the new certificate.

Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.

Reboot

But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.

View 2 Replies View Related

Plesk 12.x / Linux :: How To Append Intermediate Certificate

Mar 4, 2015

I've got an issue with the intermediate certificate, I need to provide additional to my certificate. As usual, I created a cert bundle with certs in following order:

- key data (BEGIN RSA PRIVATE KEY)
- crt data (BEGIN CERTIFICATE
- intermediate data (BEGIN CERTIFICATE)

And uploaded it successful to Plesk 12 certificate management. In Chrome, it's working. In Firefox not (as the intermediate cert is not provided by Plesk 12, and Firefox requires it).

How to inject the intermediate certificate for Plesk 12?

View 2 Replies View Related

Plesk 12.x / Linux :: Install SSL Certificate Using API Call

Nov 3, 2014

I am developing new module and installed SSL certificate using following API call.

Request call:
<packet>
<certificate>
<install>

[Code]....

But when i checked this domain by open in browser. the certificate is not installed. After lots of R&D i found that there are option of select SSL in hosting setting screen. The default selected SSL is "default certificate".

I have changed this option to "not selected".

After this changes i have installed certificate again and it is working fine. So is it bug in plesk or it is default behavior Plesk Panel?

View 4 Replies View Related

Plesk 11.x / Linux :: Changed Panel SSL Certificate But Webmail Still Uses Old One

Jul 7, 2014

I created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.

But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com

How do I update to the new certificate for webmail?

EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.

View 1 Replies View Related

Plesk 11.x / Linux :: SSL Intermediate Certificate (Broken Chain)

May 30, 2014

I bought yesterday a SSL certificate from Comodo (PositiveSsl).

I have three files to install : the certificate itself, the Root certificate and the intermediate certificate.

Where can I add the intermediate certificate file ? Currently, a SSL report shows that the chains is broken (which is actually right).

View 1 Replies View Related

Plesk 12.x / Linux :: SSL Email Certificate For Single Domain

Jul 3, 2014

Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?

Can I install on the plesk server a self-signed SSL cert and avoid the issues?
Can I buy & install a single certificate for that one domain and resolve the issue but not affect others.
Do I need to buy a SAN certificate for the whole server?

BTW I'm running CentOS 6.5 and Plesk 12.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved