I tried to remove the ssl certificate but although I have removed it from the IP I'm getting an error that it is still assigned to it. The solution in [URL] .... didn't work cause the Certificate field is grey out in my case.
View 1 RepliesI installed a new ssl certificate, changed it to be default and secure Plesk, switched the IP to use it. Now I wanted to remove the old one but it shows me that there is still one usage of this cert and I can't remove it. But how can I find what is using it?
View 5 Replies View RelatedI've installed a replacement for the SSL certificate that we use for shared SSL and Plesk access.
How do I get rid of the old one and get Plesk to use the new one for shared SSL and Plesk access?
When I try to delete it I get the message "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
I've found a lot of old suggestions about removing it from the IP, but they don't seem to apply to Plesk 11 for Windows.
When I go to Home -> Tools & Settings -> IP Addresses -> [IP Address] , it shows the domain being used but there's no way to remove it.
Using Plesk 12 on CentOS, I'm unable to remove an old expired SSL certificate from one of my domains. It's not actually associated with any other domains either, although the Plesk value of 'Used' is > 1.
Please see this screenshot:
The 'retail' certificate above 'retail 2015' it isn't actually on any other domains - I've checked. So how can I remove it? I can see the 'psa' mysql table, is it safe to remove from there?
I've have a problem with a server : we have create as usual certificate with Tools > SSL certificates.
When we want to put certificate with the domain, we don"t have the "Secure your sites" menu in the "websites and domains" sub category.
Why ? How can i activate the certificate with the domain ?
I have issue with qmail server. I want to update ssl certificate and for this i have replaced older servercert.pem with new servercert.pem file in /var / qmail/ control/. and restart service of qmail using qmailctl restart.But after updating this certificate my web browser still showing older certificate details.
View 1 Replies View RelatedHow to remove PHP Selector & Resource Usage? Refer image
View 4 Replies View RelatedI'm having the following issue:
Whenever I click on the Plesk panel link "Add or Remove Components" he will open a new browser window and runs into a timeout.
Browser: "Error code: ERR_TIMED_OUT"
I can't see any error messages in the panel.log and everything else from the panel is working fine.
System is running CentOS 5.11 with Plesk 12.0.18 Update #35
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I had forwaded a domain
say mydomain.com
to yourdomain.com
Which works fine and no issues
Now I wish to remove the forwarders and make the website active and visible
I am attaching the snap shots to show what I tried
i have to delete all PTR records in over 80 domains in a Plesk 12 panel, when i tried to run the dns command to remove the PTR record from a domain, i got the error :
Code: Unable del record in DNS server: unable find DNS record ...
There is a KB article about this specific problem : [URL] .... , but it refers to older Plesk versions (8.x-10.x). I gave it a shot by copying the fix file from all 3 different versions to /usr/local/psa/admin/plib/api-common/ and i got the following PHP errors:
Code:
PHP Warning: include_once(class.PHostingManager.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/api-common/cuDns.php, Line: 4
PHP Warning: include_once(): Failed opening 'class.PHostingManager.php' for inclusion (include_path='/usr/local/psa/admin/plib:/usr/local/psa/admin/externals'); File: /usr/local/psa/admin/plib/api-common/cuDns.php, Line: 4
[URL] ......
Is there any workaround this PTR issue? Also, is Parallels going to update the article and provide solution for Plesk 12?
How do I remove psa-proftpd on my Server? or make config by proftpd-basic?I have problems with Game Panel Easy-Wi..or is there a tutorial about this problem with Plesk and Easy-Wi?
View 6 Replies View RelatedI want to embed a SSL certificate for mailman permanently in the server.conf file.
For Roundcube I've found a manual: [URL] .... (in German), but not for Mailman.
I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.
I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?
I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?
I’ve read the documentations of (PBAS, Plesk, and Securing Websites).how to add SSL Certificate to our Webmail? In addition, I need to know, how to request CSR key and install SSL for our mail server in order for us to protect our emails and to use the SSL Protocol in mail softwares such as Outlook? I will explain the scenario in details:
1- We have (www.example.com) which is our "Plesk Server hostname" and a subscription in our "Plesk Server".
2- We have (pbas.example.com) which is our "PBAS Server hostname" and it's not a subscription in our "Plesk Server".
3- We have (account.example.com) which is a "Subscription" in our "Plesk Server".
Here are the DNS records of our domain and subdomains:
Host-Type-Data
-A-192.168.1.30
www-A-192.168.1.30
mail-A-192.168.1.30
pbas-A-192.168.1.31
account-A-192.168.1.32
-MX-example.com.
how to generate CSR key for each domain/subdomain and how to install the SSL for it? Our "Plesk" is 11.5 and installed on CentOS 6.4.
When using `plesk bin --update domain.example.com -certificate-name 'certificate'`, Plesk always returns `Unable to find certificate`, I have verified the certificate exists using `plesk bin certificate -l -admin` and the spelling of the certificate name is correct. I can use the WebUI to associate the certificate to the site and have verified it works, however I need to automate this task.
Also, the online documentation for the `plesk bin site` command does not mention the `-certificate-name` option, however it is listed when running `plesk bin site -h`.
The documentation missing the information is found here: [URL] ....
I'm running Parallels Plesk 12 on Debian GNU/Linux 7.6...I have a valid certificate for my mail server : mail.mydomain.tld but I don't find the place in Plesk 12 to put it.
View 2 Replies View RelatedI installed a new certificate, made it default, assigned it to the shared ip address and made the plesk panel use it.
The problem is we have 200 virtual hosts using the old certificate. Is there a way to reconfigure all those domains easily.
My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail
What I want:
I have an old sha1 certificate and I would change this for the whole server.
What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).
Then I set the new certificate as standard certificate and pressed the "secure pannel" button.
After that the panel uses the new certificate.
Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.
Reboot
But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.
I've got an issue with the intermediate certificate, I need to provide additional to my certificate. As usual, I created a cert bundle with certs in following order:
- key data (BEGIN RSA PRIVATE KEY)
- crt data (BEGIN CERTIFICATE
- intermediate data (BEGIN CERTIFICATE)
And uploaded it successful to Plesk 12 certificate management. In Chrome, it's working. In Firefox not (as the intermediate cert is not provided by Plesk 12, and Firefox requires it).
How to inject the intermediate certificate for Plesk 12?
I am developing new module and installed SSL certificate using following API call.
Request call:
<packet>
<certificate>
<install>
[Code]....
But when i checked this domain by open in browser. the certificate is not installed. After lots of R&D i found that there are option of select SSL in hosting setting screen. The default selected SSL is "default certificate".
I have changed this option to "not selected".
After this changes i have installed certificate again and it is working fine. So is it bug in plesk or it is default behavior Plesk Panel?
I am using Plesk 12 on Centos 6.
The Add and Remove Product Components panel lists various options to install.
There are options to add PHP 5.6, PHP 5.5, PHP 5.4, PHP 5.3 and 5.2 support. None of these are installed.
At the same time under a heading Web hosting features there is a PHP5 support that is installed.
What is the difference between these two references for same PHP5?
Does the panel allow installing PHP5 from two places?
Is it possible to completely remove the WordPress Toolkit.
Or at least to remove the button from the Basemenü at "Server Management"->"WordPress" ....
Yesterday I tried to install Fail2Ban on centos 6.5.
Set up for 30 seconds due to, I don't have much domains on plesk.
Fail2Ban stopped working and failed really bad, and it stopped working.
Later on we tried to uninstall Fail2Ban through Add/remove components and we were stack on logging. (about 20 hours same thing)
Right now, add/remove components comes with an error message (Can't connect to backend. No such file or directory)...
Is there a command line way of removing Plesk backups?
I'm looking for the command line equivalent of these steps: Log into Plesk as the server admin > "Tools & Settings" > "Tools & Resources" > "Backup Manager" > check a backup and click "Remove".
We have a script that copies the contents of "/var/lib/psa/dumps/" to Amazon S3 for long-term storage of backups. It runs nightly after a scheduled Plesk backup. Once that script completes successfully, we'd like to delete the Plesk backup to free up disk space. We have Plesk's "Maximum number of backups in the repository" set to 1.
But Plesk appears to keep that backup around while creating a new backup (which makes some sense). This is causing us trouble because the server does not have enough disk space for two backups. As a temporary solution, I'm manually deleting the backup each day through the Plesk admin, but would like to automate it if possible. If automation is overly complex/risky, we'll look at upping our disk space instead.
We can't install or remove any extension after upgrade to Plesk 12.0.8 from 11.5. When we go to Extensions Management > Add Extension for uploading a new extension, we are only allowed to use .deb and .zip. Before we had rpm and zip. This upgrade has been done on a Linux Server with CentOS installed (rpm based). How can we change the allowed extension for uploading an rpm file?
View 5 Replies View RelatedI know now how to install the integrated Help Desk funktion. But how do I remove the Link "Install Help Desk" when I remove the Applications osTicket?
View 1 Replies View RelatedI want to use the Panel as a Master DNS Server.
1: Obtain two Nameservers. ns1.maindomain.com, ns2.maindomain.com. (Completed)
2: Glue the Nameservers to the server's IP addresses. 1.1.1.1 -> ns1.maindomain.com / 2.2.2.2 -> ns2.maindomain.com (Completed)
3: Successfully register domain and make sure it's pointing to the correct server. (Completed)
4: Register new domain (client.com) to server using ns1.maindomain.com & ns2.maindomain.com as it's nameservers. (Problem)
Reason: Can't edit the template correctly due to a suffix .<domain> that I cannot get rid of.
In order for me to use (ns1.maindomain.com) and (ns2.maindomain.com) as the namerservers for client.com, I'll need to be able to edit those fields entirely. I don't want Plesk to append the client's domain name to the NS record.
This may be a very simple thing to remove, but I give up.
In Tools & Settings --> IP Adresses I got two IP Adresses:
192.168.1.10 (primary, bold)
89.104.83.139
Since the first IP adress is just the internal IP adress, I'd like to remove it, but I get the message that it's not allowed because it would be the primary IP.
Plesk has no option to just switch the primary IP adress, so what's the way to do it with plesk12?
I created a new SSL certificate and made that the default for the Panel in the SSL Certificates section. That works fine.
But my webmail URLs are still using the old certificate. E.g. https://webmail.mydomain.com
How do I update to the new certificate for webmail?
EDIT: creating a certificate for mydomain.com and using it in the Hosting Settings section did not work.