Plesk 11.x / Linux :: ProFTPD Not Working On Fresh Ubuntu 12.04 LTS Install
May 10, 2014
I had a HDD crash recently on my Root Server. Replaced HDDs, installed Ubuntu 12.04 LTS, since Ubuntu 14.04 LTS is not supported by Plesk yet. Anyway...
I had 2 issues:
1) Could not create Customers, because IP Pool was empty. Changed IP Type from Dedicated to Shared. Fixed issue.
2) Cannot connect to the FTP Server using the Login Data from one of my Domains.
FlashFXP and FileZilla both show the same error, which is:
Code:
Response:220 ProFTPD 1.3.4c Server (ProFTPD) [*ip removed*]
Command:USER *user removed*
Response:331 Password required for *user removed*
Command:PASS **************
Response:530 Login incorrect.
Error:Critical error
Error:Could not connect to server
View 1 Replies
ADVERTISEMENT
Aug 11, 2014
on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code:
2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443"
So the problem seems to be the sw-engine service that cannot be started.
If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code:
* Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
View 2 Replies
View Related
Apr 26, 2008
Anybody have a good scheme of fresh install or preinstallling a server with Linux (CentOS in this case) remotely?
View 7 Replies
View Related
Mar 21, 2008
I finally got my hands on a test server and am playing with Centos.
I got it installed but am not sure where to go from here in regards to getting it setup for web server use.
Is there any documentation on what to install for web server use? Is there a cheat sheet out there I can follow?
View 10 Replies
View Related
Jul 17, 2008
just installed CentOS 5.2 and got this error
error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
then, i tried to search libgcc_s.so.1
[root@server]# find /usr -name libgcc_s.so.1
nothing found.
how to fix this error..
View 2 Replies
View Related
Oct 15, 2014
During the installation procedure, the script stopped unexpectedly
Errors were encountered while processing:
/var/cache/apt/archives/psa-proftpd_1.3.5-ubuntu14.04.build1200140604.16_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 1 Replies
View Related
Jan 25, 2015
How do I remove psa-proftpd on my Server? or make config by proftpd-basic?I have problems with Game Panel Easy-Wi..or is there a tutorial about this problem with Plesk and Easy-Wi?
View 6 Replies
View Related
Jan 30, 2015
I'm running a brand new installed VPS with CentOS 6.6 and Plesk 12.0.18. I created a subscription and by default a FTP user is created. However, I cannot login with these credentials. I also created a new user but the same problem presists. I'm 100% sure that the username and password is correct.
Filezilla gives me and 530 Login incorrect. But if I look at the /var/log/secure file, I see this odd message (FTP username = test):
Jan 30 16:01:45 transip proftpd: PAM unable to dlopen(/lib64/security/pam_stack.so): /lib64/security/pam_stack.so: cannot open shared object file: No such file or directory
Jan 30 16:01:45 transip proftpd: PAM adding faulty module: /lib64/security/pam_stack.so
Jan 30 16:01:45 transip proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
Jan 30 16:01:45 transip proftpd[18085]: 127.0.0.1 (x.x.x.x[x.x.x.x]) - USER test (Login failed): No such user found
No such user found, although it is created with Plesk.
View 10 Replies
View Related
Aug 11, 2009
The setup:
2wire BT router (Firmware 6.1.1)
1 Server (Dell) Hardware with NICs (Server is connected to router via Ethernet Cable)
5 Static Ip addresses purchased from BT
Server OS is Centos 5.2
All laptops (5) are able to connect to the net wirelessly. I just did a standard installation of the Centos following [url]
I then tried
Code:
yum update
but it times out. I have no remote access to the server. I can only connect when i am on the router. I have seached, read and tried so many sites and commands but it just is not working. I have had this problem for about a 6 days.
Its a long story but basically this server setup has become a nemesis.
I don't mind providing remote access to the server and router admin page if needed. I am in London btw.
View 1 Replies
View Related
Feb 11, 2015
I am noticing that several of my users are wiping out their user root folders ( logs, error docs, etc...) when they fail to use '/httpdocs/' as the root directory when publishing with FTP.
I fixed this by editing the proftpd.conf to use ~/httpdocs/ as the DefaultRoot folder ( instead of just ~/ ).Would it be safer(better) to go through all the ftp users and make the home directory '/httpdocs/' instead of '/' in the admin UI? If yes, what is the best way to do a mass update of this setting for multiple users ( multiple domains ) ?
View 2 Replies
View Related
Apr 4, 2014
Is it possible to enable NLS support in psa-proftpd package?
root@server :]> proftpd -V | grep NLS
- NLS support
Is it possbile for proftpd to support not English filenames ( for example russian, greek etc )?
View 5 Replies
View Related
Mar 4, 2015
I have a brand new Plesk 12 Installation with just a first Subscription/Domain for my test. Enabling fail2ban jails brings me the following error for the jails plesk-proftpd and ssh. All others went on.
error 'f2bmng failed: ERROR No file(s) found for glob /var/log/secure'.
I see that /var/log/secure is missing, althoug I already used ssh and ftp to log in once. I can go to touch the /var/log/secure file or adjust the jail configs to proper log file location? Which is the way to go?
View 2 Replies
View Related
Nov 13, 2014
My company and I are currently discovering Plesk on a CentOS 6.6 based system. We are migrating from an old system on which FTP usernames could hold uppercase letters, which apparently is not the case in Plesk 11 (or is it because of CentOS?).
Anyway, as we can't change these FTP account names, I was thinking about creating a rule with mod_rewrite in the proftpd.conf file.
So the question is: how can I reinstall/reconfigure proftpd with this module activated? I don't even know where to find the corresponding package (which repo, correct version, etc...)
View 2 Replies
View Related
Jun 7, 2015
I would like to Mysql 5.6 installed on Plesk 12. Is that possible? How does it work?
View 1 Replies
View Related
Sep 29, 2014
I have upgraded php 5.5 using below steps,
===
sudo add-apt-repository ppandrej/php5
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install php5
==
Its also upgrading Apache from 2.2 to 2.4 and after installation, it break my Apache configuration and getting configuration errors when adding domains from Plesk etc.
Is there any proper way to upgrade PHP 5.5 in Plesk 12.0(Ubuntu 12.04)...
View 1 Replies
View Related
Nov 28, 2014
I see that Plesk 12 supports MySQL 5.6, but the server I am running is Ububtu 14.04 LTS and comes with 5.5.
I need to make 5.6 available but I can see no way of doing it without breaking Plesk (I already tried just installing it from command line with apt-get install and had to restore the whole server from backup!) - there is no option for MYSQL in Plesks updates & upgrades menu ...
View 14 Replies
View Related
Feb 10, 2015
I am trying to transfer Plesk 12.0.18#34 from an Ubuntu 12 server to an Ubuntu 14 server.
Using the transfer manager, I got these warnings:
The following Apache modules are not installed on the destination server: authz_default. Please install and enable these modules to prevent possible problems. The following Apache modules are disabled on the destination server: roxy_http,proxy_html,proxy,authz_groupfile,reqtimeout. Please enable these modules to prevent possible problems. The php_version 5.3 is not available on the destination server. Instead, Plesk will use the following version: 5.5. To use the same php_version as on the source server, you should turn on or install it on the destination server. 3 domain(s) will be affected.
I am a bit puzzled by the authz_default warning as it is not supported anymore on Apache 2.4.
If I override and launch the transfer, I get these errors:
PHP Notice: Trying to get property of non-object; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 173
PHP Notice: Undefined index: xx.xx.xxx.202 [IP of old server]; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 180
[Code]....
View 2 Replies
View Related
Feb 22, 2008
I have been attempting to install Proftpd on linux(cent os 5 32 bit). The issue is i have to use proftpd i can't use vsftp or pure ftp I have downloaded the RPM. I downloaded this one to the server [url]. and i ran the command rpm -ivh proftpd* and it did its thing for a second and told me it was done. But when i run the command /etc/init.d/proftpd start or restart it doesn't wanna start. It just tells me failed. Can anyone help me with this? I'm not sure what else i can do.
View 6 Replies
View Related
Mar 2, 2015
Installing Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
View 3 Replies
View Related
Aug 24, 2014
I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB,
I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time.
Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet.
I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change.
View 1 Replies
View Related
May 7, 2014
We've had an issue where some of our Plesk installation was trashed. It's on a server which runs multiple live sites.
Most of the psa package no longer exists.
Is there a way to re-install Plesk without making it "think" that it's a new installation, thereby preserving all data?
Would apt-get install -f psa do it?
View 1 Replies
View Related
Mar 18, 2015
I used the search function. Im USING UBUNTU NOT CENTOS!
I set up an virtual ubuntu Server on a Proxmox Root. I used the .iso from plesk.
Now when i tried to start installing magento, there is the message, that there is no mcrypt installed.
I installed it using php5-mcrypt its done and i can see the folders and also te mcrypt.so and so on.
When i tried to install atomic there is the message that redhead is not available at /etc/readhead...
View 4 Replies
View Related
Jul 19, 2015
Is it possible to install Plesk 12 to Debian Jessie with the autoinstall script?
View 7 Replies
View Related
Jun 18, 2014
We are unable to change the view to service provider in plesk12. Only power panel seems to show up.
Tried to do a bootstrap repair but that hasn't fixed it.
View 3 Replies
View Related
Mar 22, 2008
How to install a zend optimizer in ubuntu?
View 3 Replies
View Related
Jan 14, 2008
Cant seem to find anywhere that has a tutorial or instructions on how to install mod security for ubuntu gutsy, has anyone installed it lately and like to share their experience or tell how? Ive google to try find answer about 4 times now in last 2 weeks and still havent found anything.
View 1 Replies
View Related
Jan 12, 2008
I am running ubuntu server 6.
I'm just wondering if I should install webmin under root using the sudo command or should I create seperate user space for it?
View 0 Replies
View Related
Dec 9, 2008
I have in the past downloaded/installed MAMP for PHP/MySQL development on my Mac laptop.
I recently learned about Ubuntu and am intrigued.
I need to either reinstall MAMP (from www.mamp.info/) which is nothing more than a button click or two.
I do not want to find myself inside a unix shell on the command line - if that's required to install Ubuntu
View 1 Replies
View Related
Mar 5, 2008
I would imagine there's a source for this but google's not yielding much. I'm looking for a CD/DVD ISO that will essentially auto install and configure a linux box with at least SSH access so I can manually install the rest.
I know bluequartz does this, put the CD and the install auto configures pretty much everything. Where would one find one click install discs for either CentOS or debian/ubuntu?
View 2 Replies
View Related
May 25, 2015
After installing a separate SSL to domain.com and www.domain.com, for some reason host.domain.com, which is the subdomain for plesk login, isn't being secured by FTP when choosing "Secure Plesk" after choosing the correct SSL. No error occurs, nor does the dashboard respond to it. It stays the same and unsecured. I tried rebooting server, restart services, etc.
View 1 Replies
View Related
